[Q] Headset Icon persistent on status bar - Unable to hear through earpiece - LG Optimus G (International)

Dear All,
I have E975 International Version with JB and flashed KK. I had a strange issue 2 days before: All of a sudden I saw a headset icon in status bar and I couldn't find any settings to remove it. Because of this I was not able to hear anything through phone's earpiece when attending a call.. I had to use my earphones and after the call ended and I removed the earphones, still the icon was showing and still the same condition.
This happened to me on JB also, so, I did wipe cache, dalvik cache, hard reset everything... none of them worked.. so, I switched off the phone for some 4 to 5 hours and rebooted it.. now the Icon is gone.. but unfortunately when I did hard reset, my internal memory is wiped, luckily i had a backup so no issues...
So, my question is, have anyone of you had this issue before? is this ROM specific? because it happened to me on JB and on KK(both stock kdz flashed through flash too)
Now, I'm back to JB(flashed through kdz). Im using open europe v10H. my earlier kk was german v20A.
Any help would be much appreciated.
Thank you all

So weird.... Don ve ny issues lyk this.... Might be some water or moisture has sticked inside the port.... I guess...!!
Sent from my LG-E975 powering Stock 4.4.2 & SOLID Kernel

Related

[Q] Please help!!! MIC is breaked after Update...

Hi ll,
I really out of ideas here .
I was running Pays 1.9 Bravesoul ROM without any issues for about 4 months on my unbranded Desire(HBOOT 0.75)!
Today I decided to update to Froyo.
I used Rom Manager to upgrade to OpenDesire 3.03 and Radio 32.43.00.32U_5.09.00.20.
Every thing went well, except that I noticed that the MIC doesn't work at all.
Not when I make or receive a call, Not if I try to Mute/Unmute it, Not if i try to Record sound, or Video or WHATEVER!!! The only way the other side can hear me is trough my BT headset.
So I tried to use the LeeDroid 1.7a ROM but same result. Also tried to use different Radio - 32.42.00.32U_5.09.00.08.
I then Nandroid restore to my 1.9 Pays rom (Wiping Data+Cach+ext), but still doesn't work. I tried different Radios:
32.37.00.32U_4.06.00.16_2
32.36.00.28U_4.06.00.02_2
32.26.00.24U_4.04.00.03_2
same thing...
I finally Unrooed my Desire to v1.15.4 Radio 32.30.00.28U_4.05.00.11 without any luck!
So I'm pretty hopeless Please if someone also have / had this issue, Please share!
Thanks!
sounds to me like it's broken mate
i know it's coincidence that it broke as you changed ROM but if it doesn't work on anything there's no explanation
have you tried a hard reset + clearing caches?
if you have then unroot your phone, put it back to your original RUU for warranty purposes and sent it back for repair
by what do you mean Hard Reset?
I wiped all data, I've changed roms.
Currently It's unrooted...
Is it possible for the Radio update to do this? (all the updates went without a hitch)
Or maybe the OpenDesire ROM (I see that v3.03 is removed, do you know why?) did this?
There is no way it a coincidence. I making phone calls all the time, The update took me about 15 min, after which I tried the Video camera and noticed there was no sound...
Thanks!
well, I noticed that the mic works, but extremely week! I really need to shout in order to hear a whisper... I do this in recording...
I'm starting to believe that maybe it's the mimbrein (Or the piezzo) that is ruined inside the mic...
Is it possible to control the gain in software? (Is there still a chance that the S.W upgrade caused this?)

[Q] [help] GPS toggled on - searching indefinately for sat's

Need some help with troubleshooting a problem that started after installing Slim Bean 2.8, though I don't think it is the fault of the rom.
A few days ago I got tired with the ICS custom rom I had on my phone and decided to try one of from the original development section of this forum. The GPS worked flawlessly so far, turing on the toggle on the status bar and then going into google maps would locate me within 5 sec. The icon for the satallite would also show up in the status bar.
Then yesterday I flashed the Slim Bean 2.8 and was super exited about the look and feel of the rom, but when I tried to use navigation the app kept saying 'searching GPS signal'. I then tried toggling the GPS icon in the task pane and even re-installed the rom and performed a factory reset, but nothing helped.
Today I installed a GPS diagnostic app from the play store and while it says GPS ON it never finds any satellites. Then I performed the last desperate move and flashed the stock ATT rom with root inejcted via ODIN. Still GPS is not working.
Am I missing something? Could it be that the phones GPS is defective?
Any help is appreciated. Thank you.
anosis said:
Need some help with troubleshooting a problem that started after installing Slim Bean 2.8, though I don't think it is the fault of the rom.
A few days ago I got tired with the ICS custom rom I had on my phone and decided to try one of from the original development section of this forum. The GPS worked flawlessly so far, turing on the toggle on the status bar and then going into google maps would locate me within 5 sec. The icon for the satallite would also show up in the status bar.
Then yesterday I flashed the Slim Bean 2.8 and was super exited about the look and feel of the rom, but when I tried to use navigation the app kept saying 'searching GPS signal'. I then tried toggling the GPS icon in the task pane and even re-installed the rom and performed a factory reset, but nothing helped.
Today I installed a GPS diagnostic app from the play store and while it says GPS ON it never finds any satellites. Then I performed the last desperate move and flashed the stock ATT rom with root inejcted via ODIN. Still GPS is not working.
Am I missing something? Could it be that the phones GPS is defective?
Any help is appreciated. Thank you.
Click to expand...
Click to collapse
that also happen to me from flashing one of those sprint leak, i went back to stock or any other roms got no gps, even factory reset still no gps, i fixed it by flashing the same sprint leak again and try the gps and it give me signal, then i restore back to stock and factory reset gps still there, and from there i install recovery and flash other roms again and gps is working after that
dawen said:
that also happen to me from flashing one of those sprint leak, i went back to stock or any other roms got no gps, even factory reset still no gps, i fixed it by flashing the same sprint leak again and try the gps and it give me signal, then i restore back to stock and factory reset gps still there, and from there i install recovery and flash other roms again and gps is working after that
Click to expand...
Click to collapse
I'll give that a shot. Just hoping I can remember which one of the leaks I may have installed. I'll report back if it works and send a thanks your way.
Flash to stock lg1, unrooted. Then do a factory reset from the settings menu, not recovery. Pull everything off your internal card that you want to keep, this will erase/format your internal card
******THIS WILL ERASE YOUR INTERNAL CARD*****
I had the same problem after flashing a sprint based leak. But, that procedure fixed everything for me.
mrhaley30705 said:
Flash to stock lg1, unrooted. Then do a factory reset from the settings menu, not recovery. Pull everything off your internal card that you want to keep, this will erase/format your internal card
******THIS WILL ERASE YOUR INTERNAL CARD*****
I had the same problem after flashing a sprint based leak. But, that procedure fixed everything for me.
Click to expand...
Click to collapse
i did that before for 3 times factory erasing everything and it never worked
dawen said:
that also happen to me from flashing one of those sprint leak, i went back to stock or any other roms got no gps, even factory reset still no gps, i fixed it by flashing the same sprint leak again and try the gps and it give me signal, then i restore back to stock and factory reset gps still there, and from there i install recovery and flash other roms again and gps is working after that
Click to expand...
Click to collapse
Sure enough I flashed back DG's JB Sprint leak and the GPS icon is back and locks within seconds. Now I just need to revert back to stock and then reinstall one of the CM10 releases.
mrhaley30705 said:
Flash to stock lg1, unrooted. Then do a factory reset from the settings menu, not recovery. Pull everything off your internal card that you want to keep, this will erase/format your internal card
******THIS WILL ERASE YOUR INTERNAL CARD*****
I had the same problem after flashing a sprint based leak. But, that procedure fixed everything for me.
Click to expand...
Click to collapse
I'll give this a shot next time I have trouble. Any clue why this happend in the first place and how to prevent it from happening?
Thanks.

Calling problem with SoD

Hy.
I used the 4.2.1 with franco kernel and today i get this problem when i wan't to calling anyone. If i call, the screen going to black, and i just can't aborting the call. Only i can do, is remove the battery. So i pull back the 4.1.2 with stock kernel, but the problem is still alive.
Anybody know about this something ? It's a really frustrating problem.
SamS1989 said:
Hy.
I used the 4.2.1 with franco kernel and today i get this problem when i wan't to calling anyone. If i call, the screen going to black, and i just can't aborting the call. Only i can do, is remove the battery. So i pull back the 4.1.2 with stock kernel, but the problem is still alive.
Anybody know about this something ? It's a really frustrating problem.
Click to expand...
Click to collapse
A similar thing happened with me long time ago when I installed a nightly CyanogenMod on my S2 but it disappeared immediately after changing the ROM. It seems 4.2.1 and franco kernel were working fine with you at first but only today you got this problem, right?
I would make a nandroid backup, wipe all (system, factory reset, cache, and dalvik) then install the ROM again or better try another ROM to at least know if it is the hardware (proximity sensor?) or the software causing this problem. The nandroid backup will help you restore everything in case you get into any further trouble
Good Luck

[Q] 4.3 OTA update from rooted 4.2.2. Lost in call sound

Hey everyone,
after trying to keep my root from the OTA I caused some problems and fubar'd my phone. so I did a full restore because i didn't even have a phone app anymore.
I re-installed all my apps and even got Nova Launcher back without root. but now whenever I make or recieve a call. I can't hear anything and the other person cannot hear me. (i found a similar issue on youtube with a Nexus 4 and he updated the baseband)
I think it may be a baseband issue like in that video above, BUT, I do not know what baseband I should have on my Gnex.
Any help?
thank you!
-EDIT- Booting into recovery and whiping Dalvik seems to have fixed the issue. I also let the phone flash the stock recovery (if that matters) but I don't think that has anything to do with my baseband -/EDIT-
still FUBAR
BioHazard92 said:
Hey everyone,
after trying to keep my root from the OTA I caused some problems and fubar'd my phone. so I did a full restore because i didn't even have a phone app anymore.
I re-installed all my apps and even got Nova Launcher back without root. but now whenever I make or recieve a call. I can't hear anything and the other person cannot hear me. (i found a similar issue on youtube with a Nexus 4 and he updated the baseband)
I think it may be a baseband issue like in that video above, BUT, I do not know what baseband I should have on my Gnex.
Any help?
thank you!
-EDIT- Booting into recovery and whiping Dalvik seems to have fixed the issue. I also let the phone flash the stock recovery (if that matters) but I don't think that has anything to do with my baseband -/EDIT-
Click to expand...
Click to collapse
well, no I have sound when using speaker phone, BUT no sound in normal headset operation. HELP!!

Problems with audio in calls from handset since changing to 5.0gpe

sorry if this is abit long winded,
hey everyone, not sure whats going on here. this is the tmob variant but i had moved over to a gt-i9505 rom dandroids stock gpe 5.0 back almost a month ago, this was upgraded from jamals 4.4.4 gpe which was working great. i installed the googly 1.2.3d kernel and that was also working well. i noticed that i forgot to fully reset all my storage and noticed jamal brought out a 5.0 rom so i swaped to that and wiped everything about a week ago and at first didint notice any issues.
then i recived a call and answered it on the handset and for the first few mins it was working fine all of a sudden something glitched and i had no audio like the call droped i hung up called back no audio. reset the phone same thing. just a day before this happened i updated the kernel to 1.2.5 googly for gpe5, so i figure this is it so i reflash and reset storage and no change. oddly this entire time there have been no problems with calls when using my bluetooth headset.
long story short i have installed and wiped one about 3 different roms including the dandroid that was working ok. i am now all the way back to the 4.4.4 jamal rom that i was on before i started and the problem is persisting. when i call someone the other party hears a high pitch squealing sound but only via the handset the "ok google" is working fine. i have not restored the nandroid backup yet.
baseband is m919uvufnb4
i have the current version of the twrp as what i have been installing everything from.
happy to provide more info. i know im still on the pre knox bootloader
and when i get home im going to try my wife sim see if that changes anything.
Update
Wife's sim changed nothing
Also wanted to say that I also read about a apn reset trick that was supposed to help. I did fix it one time but it recurred again and and since stopped working
Having that same issue gpe 9505 5.0 no audio in calls unless I'm using Bluetooth no handset no speaker
You guys Ned to update your bootloader and everything will be fixed.
You can only get so far with ancient bootloaders before the wheels come off.
Pp.
How do you do that
You need to Odin the latest version NK2, you can find it in general section, ShinySide has a mega link to download firmware.
Follow instructions and you will have a S4 that works properly.
You can use chainfire's auto root in original development to root.
Pp.

Categories

Resources