Hello, T mobile GS4 owner here. I think I first posted this question in the wrong forum. Hopefully this is the right place. I wanted to post in the Liquidsmooth thread, but was unable to.
I just signed up because I'm having trouble flashing the latest Liquidsmooth rom. I've been happily running Liquidsmooth for many months now, and my current version is from 6/21/14. I haven't had any problems flashing until now.
I've tried flashing the last 2 builds and keep getting the message "unfortunately themes provider has stopped".
It appears as soon as the phone boots up after flashing. It's right in the middle of the screen and won't allow me to do anything. Every time I click on OK, it comes back immediately. I have searched high and low for a way to fix this. So far I've tried reloading, rebooting, re-downloading starting again from scratch. I always clear the data and cache and do a factory reset. I have attempted flashing at least half a dozen times and always get the same annoying message.
Any help would be very much appreciated.
BTW, I'm also flashing the latest full version of GAPPS at the same time.
Related
Okay so the other night i went and decided to flash the UK 2.2 firmware specifically 3.4.2.155 then flashed Pay's ROM and it went well. Instantly fell in love with how smooth everything ran without blurr. However.. as everyone warned I lost 3G and Wifi Calling.... and I love those things.
Did the adb push of those 3G fix files for 6.19 T-Mobile that user rob_t put together...http://forum.xda-developers.com/showthread.php?t=897445
However after rebooting i was simply stuck on moto logo... the wretched bootloop... and was forced to go back to US froyo...which after using Pay's rom just seemed unbearably slow...
Any reason that the 3G fix only seemed to bootloop me?
I really want Pay's ROM but I must have 3G
http://forum.xda-developers.com/showthread.php?t=944258
try these fixes dude...
i using pays rom and 3g is normally working.
phanikiranss said:
http://forum.xda-developers.com/showthread.php?t=944258
try these fixes dude...
Click to expand...
Click to collapse
I finally got it working. These files were a big help since I didnt have to mess with adb myself.. (I suck at command script)
I am running jboogies ginger now... and its pretty awesome but no built in tether like Pay's rom....
Ill try it on for a week.
Thanks for pointing me in the right way again
If this thread is still open - can someone please help me. I am on Pays rom and used the zip patch, so I have data working. However, market works intermittently, and I get an error message with roughly half the data downloaded and have to keep pressing 'retry' to get everything loaded. Also, when downloading an app, the first time or even a few times, it downloads the data but doesn't initiate the install. After I click 'download' it goes back to the market screen (as usual), and I have to quickly open the link for the app that I'm downloading so it brings up the app homepage and then it will actually download/install.
Is this normal? I initially didn't wipe after flashing the rom per Pays instructions, and since have wiped and reinstalled the patch to see if that worked...but it hasn't and still doing the above.
Anyone have the same problem? Any fix? Thanks in advance for any help! Oh, and same for browser internet...keep getting error message. And I used the APN settings that is on wife's stock tmous defy.
darule_2011 said:
If this thread is still open - can someone please help me. I am on Pays rom and used the zip patch, so I have data working. However, market works intermittently, and I get an error message with roughly half the data downloaded and have to keep pressing 'retry' to get everything loaded. Also, when downloading an app, the first time or even a few times, it downloads the data but doesn't initiate the install. After I click 'download' it goes back to the market screen (as usual), and I have to quickly open the link for the app that I'm downloading so it brings up the app homepage and then it will actually download/install.
Is this normal? I initially didn't wipe after flashing the rom per Pays instructions, and since have wiped and reinstalled the patch to see if that worked...but it hasn't and still doing the above.
Anyone have the same problem? Any fix? Thanks in advance for any help! Oh, and same for browser internet...keep getting error message. And I used the APN settings that is on wife's stock tmous defy.
Click to expand...
Click to collapse
I would make a new thread I think your problem is much different than mine was and I think people will overlook your question on a resolved thread
ketonkss4 said:
I would make a new thread I think your problem is much different than mine was and I think people will overlook your question on a resolved thread
Click to expand...
Click to collapse
Ended up getting it resolved with that baseband changer on here (v3.1 worked as v3.0 wasn't working).
Thanks for the reply though...I kinda figured my post would be lost at sea given that the thread was in resolved status
Did you ever get it working on Pays or did you end up staying with jboogie?
I was running latest paranoid android and I wiped cache/dalvic cache after flashing Cerberus in recovery and when the phone booted up it was asking me to Activate (sprint service) my phone. I've never seen this with flashing roms and was wondering if this is a known issue with flashing roms on the S3 or something that can randomly occur from time to time.
Anyone have experience with this before? I had been running Paranoid Android for less than 24 hours but initially didn't have any problems whatsoever.
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
youdoofus said:
Itll do that sometimes depending on the rom. Usually does it after a factory reset and installing a cm based rom. Its just asking you to add your google account... you should be fine
sent from my thumbs
Click to expand...
Click to collapse
This didn't have anything to do with my Google account. I guess I should have been more specific, I mean that my phone is deactivated on Sprint's network as in I can't make phone calls and all the info is missing in about phone. Phone number, PRL and such. I am flashing back to stock right now and hope this fixes it. Will probably give paranoid another go but this doesn't sound like a common issue because I haven't been able to find anything by searching.
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Ahhh... could try manually flashing your modem after the install too
sent from my thumbs
billard412 said:
When you get back to stock it'll probably reactivate itself. If not (although you can do this regardless just in case), ##72786# in the dialer should set you straight. If I'm not mistaken the screen you're referring to should be gone when you boot stock regardless. Its a bug. Doesn't work for a sprint phone but still buried in the rom
Click to expand...
Click to collapse
Soon as I flashed the stock rom it tried to activate and initially failed and prompted me to reboot. Second attempt it was successful and then I immediately flashed back to PA and it is working. Going to give it another shot and keep the stock rom on my sd card this time in case I get stuck in a pinch.
I jumped the gun, phone activated fine but signal drops in and out randomly and will not connect to 3g. Just reflashed to stock again and everything seemed fine but signal was still back in and out. Checked under status and PRL read "0" tried updating to no avail so did the dialer code and it did the activation and all is right in the world again, or at least for the moment.
Just trying to figure out why when I flash Paranoid all my settings just disappear
*edit*
Just flashed back to PA this third time after fully making sure that the phone was working and had 3G data and all was right with the world (my phone). Will update if it goes South again but as of right now the phone is behaving properly. Maybe it just wasn't working right the first time and I didn't notice since I was on wifi. Only thing that keeps me from thinking that is I didn't get the Activation message until 12 hours or so after I had flashed and had been using the phone. /shrug
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
youdoofus said:
I still think flashing a modem in recovery after installing PA would yield a poisitve result
sent from my thumbs
Click to expand...
Click to collapse
how do you flash a modem? I am new to this and this is also a problem that I am having with the same rom. I tried searching for a fix and this is where i landed.
Thank you,
and sorry if i am breaking forum rules
Is there anybody out there that can help?
I've had a SGN for over two years and it seems like I have always had problems with it. I've been through mulitple SIMS, devices, ROMS, and various apps. Most recently, I had to get a new device. It took several steps of troubleshooting, but I finally rooted the phone. Got Rootchecker Pro and was able to confirm with no errors. For a while now, when I wipe, CWM skips over Android_Secure because it can't be found. About a month, after rooting the phone, I flashed the CRDroid (based on Cyanogenmod) ROM. It was then that I would get bootloops after checking on the Mobile Networks setting. It didn't always do it right away. When it didn't restart immediately, I wouldn't be able to make phone calls. Shortly after, I went through the Developer Options and updated to CM 10.2. The Mobile Network Bootloops stopped and I thought everything was great. But, there has been about three times that the phone will randomly restart and go into a bootloop at the CM splash screen. It's happened a couple times randomly and yesterday after taking about 45 pictures over a 45-minute span.
Luckily, I've been much better about making Nandroid backups and it hasn't been a big deal to restore. You can imagine, though that it is incredibly annoying and critical sometimes. I've been trying to rack my brain about what is consistent about the bootloops and can't figure it out.
It's a Toro with CM 10.2 on 4.3 Android. I flashed Golden Kernel and PA 4.0 GAPPS.
I would love to see what everybody thinks the problem could be. Thanks again.
Hey guys, it's my first post here, hope someone is able to help!
A few weeks ago I bought my LG G3. It had a problem, it was randomly rebooting throughout the day. I was told that installing a custom ROM might help, so I installed CloudyG3. It didn't help with reboots at all. Then I was told that getting a new battery might fix it. Getting a new battery didn't fix it either. I Decided to re-install the ROM, flashed with Autorec, went online to download and install TWRP and it restarted right at that time..... Now I'm getting "unfortunately system UI has stopped working" error non-stop. I did factory reset but it doesn't help. Now I can't even pass initial setup screen you get after factory-reset because for whatever reason I can't select Wi-Fi in the "Set Internet Connection" page (I keep tapping it but it can't be selected. I think the non-stop UI error I mentioned above keeps interrupting it) which is awful because you can't pass the setup screen without signing into your google account. The worst part is that I can't boot into recovery because I'm an idiot and deleted TWRP after installing Cloudy 2 weeks ago.. If only I knew..
Anyways, am I completely screwed here? is my phone "Bricked"? what should I do? If you know of any solutions, links to the relevant guides/threads would be greatly appreciated.
Big thanks in advance to anyone who responds!
Shameless bump...
Hi guys,
I started a thread about this about a week and a half ago but it seems to have disappeared so I start from the beginning.
After installing Cyanogenmod 13 on my One M8 I left it for what it was and only updated the nightlies as they came. After installing the "wrong one" I got the No sim card, No Service error and was told over here it might be solved by updating the baseband and asked me for the version I had at that time. After looking at it I found out that it was (and still is) unknown.
I decided to wipe the entire phone and start from scratch.
So........The saga contunues. Since I am not a mobile phone guru I looked up the right way to install Gaps. Today I installed the latest Nightly (cm-13.0-20160330-NIGHTLY-m8) rebooted the phone, activated the developer options and turn on the debugging function.
Right after that I installed Gaps and wiped both caches, rebooted the phone and s**t hoit the fan. Now I can't use the phone because I keep gettting a pop up telling me "unfortunately, Setup Wizard has stopped". I can press OK but it keeps popping up.
What is going wrong here? I have tried many ways, versions of Gaps and about 5 different nightlies. And, If I can manage to fix all this, is there anyone who knows where I can get the file(s) to update the baseband? Don't know if this of any help but my HTC One M8 is unbranded and is a Dutch one.
I hope there is an explanation and a solution to solve this.
Thanks in Advance!!