Develop Bugs

Pimp my rom 2 - p930 issues running cm10

So I was testing out the PIMP MY ROM release which is supposed to give a bunch of customizable tweaks for your phone.
Link to thread
Here is the log with the settings I used.
*****************************************************************************************************
AROMA INSTALLER version 2.51
(c) 2012 by amarullz xda-developers
ROM Name : >>> Pimp My Rom <<<
ROM Version : 2.0
ROM Author : Androguide.fr
Device : Any android device
Start at : Fri Oct 12 14:18:47 2012
=================================
Pimp My Rom by Androguide.fr
Please be patient. I Hope you enjoyed the installer features.
=================================
Unmounting devices
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
umount: can't umount /cache: Device or resource busy
run_program: child exited with status 1
>>> Setting up installation....
>>> Mounting partitions
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
>>> Cleaning process
about to run program [/sbin/sync] with 1 args
Backing-up original build.prop for eventual use of Un-Pimp My Rom...
about to run program [/tmp/backup_buildprop.sh] with 2 args
Original build.prop backed-up
Init.d tweaks...
Installing Touchscreen responsiveness Tweaks....
about to run program [/tmp/touch] with 1 args
chmod: /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[3]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[4]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[5]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[6]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
/tmp/touch[7]: can't create /sys/class/touch/switch/set_touchscreen: No such file or directory
chmod: /sys/class/touch/switch/set_touchscreen: No such file or directory
run_program: child exited with status 1
Installing Internet Speed Tweaks....
about to run program [/tmp/netspeed] with 1 args
run_program: child exited with status 1
Installing Battery Tweaks....
about to run program [/tmp/battery] with 1 args
Applying Kernel Tweaks....
about to run program [/tmp/kernel] with 1 args
run_program: child exited with status 1
Applying Ondemand Kernel Governor Tweaks....
about to run program [/tmp/ondemand] with 1 args
Tweaking Dalvik Virtual Machine....
about to run program [/tmp/vm] with 1 args
Copying sqlite3 Defragmentation bootscript....
about to run program [/tmp/defrag] with 1 args
run_program: execv failed: No such file or directory
run_program: child exited with status 1
Setting strict minimum free memory handler...
Installing ext4-fs Performance Tweak....
about to run program [/tmp/ext4] with 1 args
tune2fs 1.41.12 (17-May-2010)
tune2fs 1.41.12 (17-May-2010)
tune2fs 1.41.12 (17-May-2010)
Enabling misc ram tweaks....
Installing Multi-Tasking Tweaks....
Extract: /system/etc/init.d/71extreme
Installing SQLite Tweaks....
Extract: /system/etc/init.d/85sqlite
Extract: /system/xbin/sqlite3
Installing Experimental Tweaks....
Extract: /system/etc/sysctl.conf
Installing various smoothness tweaks...
Extract: /system/etc/init.d/05LagFixer
Extract: /system/etc/init.d/71net
about to run program [/tmp/smoothness] with 1 args
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $CHECK_COUNT: unexpected '$'
/tmp/smoothness[106]: $DEBUG_ECHO: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $n: unexpected '$'
/tmp/smoothness[106]: $CHECK_COUNT: unexpected '$'
/tmp/smoothness[106]: $DEBUG_ECHO: unexpected '$'
/tmp/smoothness[111]: $DEBUG_ECHO: unexpected '$'
Applying micro sdcard tweaks....
about to run program [/tmp/S83extsd] with 1 args
/tmp/S83extsd[2]: can't create /sys/block/mtdblock0/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[3]: can't create /sys/block/mtdblock1/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[4]: can't create /sys/block/mtdblock2/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[5]: can't create /sys/block/mtdblock3/bdi/read_ahead_kb: No such file or directory
/tmp/S83extsd[22]: can't create $a/queue/nr_requests: No such file or directory
/tmp/S83extsd[22]: can't create $a/queue/nr_requests: No such file or directory
run_program: child exited with status 1
Internal sd I/O tweaks....
Installing zipalign binaries....
Extract: /system/etc/init.d/S70darky_zipalign
Extract: /system/xbin/zipalign
Installing Thunderbolt system_tweak....
Extract: /system/etc/init.d/S98system_tweak
Extract: /system/lib/libncurses.so
Extract: /system/xbin/sqlite3
Extract: /system/xbin/zipalign
Installing Thunderbolt cpu/gpu add-on....
Installing Thunderbolt tcp buffers tweaks....
Extract: /system/etc/init.d/S98TCPbuffers
Installing Thunderbolt sqlite3 optimization....
Extract: /system/etc/init.d/sqlite_optimize
Build.prop Tweaks...
Writing 3G build.prop Tweaks....
about to run program [/tmp/3g.sh] with 1 args
Writing Battery Saving build.prop Tweaks....
about to run program [/tmp/battery_save.sh] with 1 args
Writing Camera quality build.prop Tweaks....
about to run program [/tmp/camera.sh] with 1 args
Writing Wifi connect speed build.prop Tweaks....
about to run program [/tmp/connect_speed.sh] with 1 args
Writing Dalvik ram build.prop Tweaks....
about to run program [/tmp/dalvik_ram.sh] with 1 args
Writing Deep-Sleep build.prop Tweaks....
about to run program [/tmp/deep_sleep.sh] with 1 args
Writing Dialing time build.prop Tweaks....
about to run program [/tmp/dial_out.sh] with 1 args
Writing Jpeg quality build.prop Tweaks....
about to run program [/tmp/jpg_quality.sh] with 1 args
Locking default launcher in memory....
about to run program [/tmp/lock_launcher.sh] with 1 args
Writing internet speed tweaks....
about to run program [/tmp/net_speed.sh] with 1 args
Writing touchscreen build.prop tweaks....
about to run program [/tmp/perf_tuning.sh] with 1 args
Allowing assets to be purged....
about to run program [/tmp/purge_assets.sh] with 1 args
Writing Scrolling speed build.prop tweaks....
about to run program [/tmp/scrolling.sh] with 1 args
Writing Video Streaming build.prop tweaks....
about to run program [/tmp/streaming.sh] with 1 args
Making device boot faster....
about to run program [/tmp/quickpower.sh] with 1 args
Enabling and Disabling Features...
Enabling Just-In-Time Compiler for Dalvik VM....
about to run program [/tmp/dalvik_jit.sh] with 1 args
Disabling Normalized Sleeper....
about to run program [/tmp/normsleep.sh] with 1 args
chmod: /sys/kernel/debug/sched_features: No such file or directory
/tmp/normsleep.sh[4]: can't create /sys/kernel/debug/sched_features: No such file or directory
chmod: /sys/kernel/debug/sched_features: No such file or directory
run_program: child exited with status 1
Multitasking...
about to run program [/tmp/lmk_chmod] with 1 args
ZRAM...
sysctl multitasking tweaks...
Tweaking kernel's stability on high memory-consumption conditions...
about to run program [/tmp/sysctl_kernel.sh] with 1 args
kernel.panic = 0
kernel.panic_on_oops = 1
kernel.msgmni = 2048
kernel.msgmax = 64000
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 268435456
kernel.sem = 500 512000 64 2048
kernel.sched_compat_yield = 1
kernel.sched_child_runs_first = 0
kernel.threads-max = 5000
fs.lease-break-time = 10
fs.file-max = 65536
Tweaking Dalvik VM's handling of high multitasking conditions...
about to run program [/tmp/sysctl_vm.sh] with 1 args
vm.drop_caches = 1
vm.drop_caches = 3
vm.oom_kill_allocating_task = 0
vm.panic_on_oom = 0
vm.dirty_background_ratio = 60
vm.dirty_ratio = 95
sysctl: error: malformed setting 'vm.vfs_cache_pressure='
vm.overcommit_memory = 1
vm.min_free_order_shift = 4
vm.laptop_mode = 0
vm.block_dump = 0
vm.oom_dump_tasks = 1
vm.swappiness = 0
vm.dirty_writeback_centisecs = 2000
vm.dirty_expire_centisecs = 1000
sysctl: error: malformed setting 'vm.min_free_kbytes='
run_program: child exited with status 1
Networks & Internet
Stability : increasing queue and buffer size of TCP sockets...
about to run program [/tmp/sysctl_queue.sh] with 1 args
vm.drop_caches = 1
vm.drop_caches = 3
vm.oom_kill_allocating_task = 0
vm.panic_on_oom = 0
vm.dirty_background_ratio = 60
vm.dirty_ratio = 95
sysctl: error: malformed setting 'vm.vfs_cache_pressure='
vm.overcommit_memory = 1
vm.min_free_order_shift = 4
vm.laptop_mode = 0
vm.block_dump = 0
vm.oom_dump_tasks = 1
vm.swappiness = 0
vm.dirty_writeback_centisecs = 2000
vm.dirty_expire_centisecs = 1000
sysctl: error: malformed setting 'vm.min_free_kbytes='
run_program: child exited with status 1
Stability : Allowing system to re-use sockets in TIME-WAIT state....
about to run program [/tmp/sysctl_timewait.sh] with 1 args
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1
Speed : Using sysctl to tweak ipv4 protocol behaviour....
about to run program [/tmp/sysctl_ipv4.sh] with 1 args
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_sack = 1
net.ipv4.tcp_fack = 1
net.ipv4.tcp_congestion_control = cubic
net.ipv4.tcp_window_scaling = 1
Speed : Applying dns & ppp0 tweaks....
about to run program [/tmp/dnsppp.sh] with 1 args
GPS Configuration...
Updating your gps.conf to match your country....
Deleting old configuration...
Copying new config...
Extract: /system/etc/gps.conf
gps.conf file updated, the gps is now more accurate and locks faster...
Installing Smart Stay EX...
Allowing Writes to Complete, Please Wait....
Extra Features
Installing Adrenaline Boost scripts....
Generating Adblock hosts file....
Extract: /system/etc/hosts
Fixing Permissions...
Pimp My Rom is checking if all the pimpin' went right, please stand by....
about to run program [/tmp/aroma/sleep] with 2 args
run_program: execv failed: Permission denied
run_program: child exited with status 1
Unmounting /data and /system
Finished, enjoy your freshly Pimped rom !
script result was [1]
Installer Sucessfull (Status 0)
End at : Fri Oct 12 14:18:56 2012
*****************************************************************************************************************************
After running the 10.10.12 version of CM10, I put it to sleep and it had the black screen of death and it couldn't boot up and was stuck at the LG logo screen. I just started CWM Recovery and flashed the ROM again which erased the tweaks.
As for right now, I'm only using the Lightning Zap v1 tweak on my 10.10.12 CM10 Nightly and its so smooth and even think it's saving me quite a bit of battery.
TL;DR: If you're going to test out PIMP MY ROM, be warned that some tweaks may cause your phone to be stuck on boot loop.

Also got stuck on LG logo on boot. But one question. How many tweaks did u apply at once? It does say not to apply all at once. Maybe the number of tweaks applied at one time is the issue? I have the lightning zap as well as the v6 supercharger and my phone is the fastest I've ever had it. Running paranoidandroid 2.5x by utacka.
Sent from my LG-P930, ParanoidAndroid, Supercharged, using xda premium

[Q] partition-layout: None (damaged partition)

Hi, similar to couple of threads, but - I believe - specific enough to start a new dedicated one. I have endeavoru HOX, cid HTC__032. Some time ago I damaged partition layout. It was complete ignorant era - I was doing things I should have read about before I bought used HOX with stock 3.14.401.31 (OTA update applied in the meantime as far as I rmember), I was experiencing some problems with it so unlocked, pushed CWM recovery and installed CM 10.1.3. Unfortunately, gapps kept crashing so I decided to do some cleaning and apparently did the factory reset in custom recovery. I guess this brought me to the state my HOX is in now.
So, how the things look like:
1. This is my current HOX info:
Code:
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.39.0000
(bootloader) version-baseband: 5.1204.162.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.14.401.31
(bootloader) serialno: *****
(bootloader) imei: *****
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) devpower: 54
[B](bootloader) partition-layout: None[/B]
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
2. I can connect via fastboot/adb - flash, use adb shell, etc. I can also push files, create and write files in adb shell, so it looks like the card is not entirely dead
3. I can flash recovery (tried TWRP and CWM) - so no problem with charging anymore
4. No partition layout and I can’t mount storage:
Code:
~ # fdisk -l /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 31.2 GB, 31268536320 bytes
4 heads, 16 sectors/track, 954240 cylinders
Units = cylinders of 64 * 512 = 32768 bytes
Disk /dev/block/mmcblk0 doesn't contain a valid partition table
Code:
~ # parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
(parted) print
print
Error: /dev/block/mmcblk0: unrecognised disk label
(parted) mklabel msdos
mklabel msdos
(parted) print
print
Error: /dev/block/mmcblk0: unrecognised disk label
Code:
~ # ls -la /dev/block/
drwxr-xr-x 3 root root 300 Nov 4 21:11 .
drwxr-xr-x 9 root root 2320 Nov 4 21:07 ..
brw------- 1 root root 7, 0 Nov 4 21:07 loop0
brw------- 1 root root 7, 1 Nov 4 21:07 loop1
brw------- 1 root root 7, 2 Nov 4 21:07 loop2
brw------- 1 root root 7, 3 Nov 4 21:07 loop3
brw------- 1 root root 7, 4 Nov 4 21:07 loop4
brw------- 1 root root 7, 5 Nov 4 21:07 loop5
brw------- 1 root root 7, 6 Nov 4 21:07 loop6
brw------- 1 root root 7, 7 Nov 4 21:07 loop7
brw------- 1 root root 179, 0 Nov 4 21:07 mmcblk0
-rw-r--r-- 1 root root 0 Nov 4 21:12 mmcblk0p13
-rw-r--r-- 1 root root 0 Nov 4 21:12 mmcblk0p15
-rw-rw-rw- 1 root root 1088 Nov 4 21:12 mmcblk0p17
drwxr-xr-x 3 root root 60 Nov 4 21:07 platform
[I]-- (but this mmcblk0pxx are there only because I tried to format - unsuccessfully - related partitions through recovery) --[/I]
~ # cat /proc/partitions
major minor #blocks name
179 0 30535680 mmcblk0
~ # cat /etc/fstab
/dev/block/mmcblk0p13 /cache ext4 rw
/dev/block/mmcblk0p15 /data ext4 rw
/dev/block/mmcblk0p12 /system ext4 rw
/dev/block/mmcblk0p14 /sdcard auto rw
~ # cat /etc/recovery.fstab
# mount point fstype device [device2]
/recovery emmc /dev/block/mmcblk0p5
/boot emmc /dev/block/mmcblk0p4
/cache ext4 /dev/block/mmcblk0p13
/data ext4 /dev/block/mmcblk0p15
/sdcard auto /dev/block/mmcblk0p14
/system ext4 /dev/block/mmcblk0p12
/misc emmc /dev/block/mmcblk0p17
~ # cat /proc/emmc
dev: size erasesize name
mmcblk0p5: 00800000 00001000 "recovery"
mmcblk0p4: 00800000 00001000 "boot"
mmcblk0p12: 50000000 00001000 "system"
mmcblk0p13: 14000000 00001000 "cache"
mmcblk0p17: 00200000 00001000 "misc"
mmcblk0p1: 00600000 00001000 "wlan"
mmcblk0p2: 00200000 00001000 "WDM"
mmcblk0p20: 00200000 00001000 "pdata"
mmcblk0p3: 00600000 00001000 "radiocab"
mmcblk0p14: 650000000 00001000 "internalsd"
mmcblk0p15: 89400000 00001000 "userdata"
mmcblk0p19: 01600000 00001000 "devlog"
mmcblk0p16: 00200000 00001000 "extra"
On TRWP/CWM/Philz I get (more or less the same) logs/messages:
Code:
E:Can’t open /dev/block/mmcblk0p17
(No such file or directory)
E: Can’t mount /cache/recovery/command
E: Can’t mount /cache/recovery/log
E: Can’t open /cache/recovery/log
[I](...) eg. Wipe Data/Factory Reset:[/I]
-- Wiping data…
Formating /data
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p15
Formating /cache
E: format_volume: make_extf4fs failed on /dev/block/mmcblk0p13
Formating /sd-ext
Formating /sdcard/.android_secure…
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete.
5. Tried RUU that ought to be correct for my HOX & hboot version: (RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed.exe) RUU software says it was flashed successfully, but when I restart the HOX it gets stucked on “HTC quitely brilliant” logo. Also, if I try to flash boot and system images manually (extracted from the ROM.zip from this RUU) the latter fails with “heap not enough” error (tried flashing on 32-bit Windows 7 and 64-bit OS X). This way or another, I don’t expect it to work, as there’s a problem with partition.
6. In the recovery I can’t wipe/erase a single thing (as in the example above)
7. As a result, no way to install a zip from recovery (due to missing partition layout) and no way to restore from backup (as it requires to mount /sdcard and it can't)...
8. ADB sideload doesn’t work (on TWRP: big red FAIL).
9. Some interesting lines from recovery.log:
Code:
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /recovery emmc /dev/block/mmcblk0p5 (null) 0
2 /boot emmc /dev/block/mmcblk0p4 (null) 0
3 /cache ext4 /dev/block/mmcblk0p13 (null) 0
4 /data ext4 /dev/block/mmcblk0p15 (null) 0
5 /sdcard auto /dev/block/mmcblk0p14 (null) 0
6 /system ext4 /dev/block/mmcblk0p12 (null) 0
7 /misc emmc /dev/block/mmcblk0p17 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /preload during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
(...)
W:failed to mount /dev/block/mmcblk0p13 /cache ext4 (No such file or directory)
stat /dev/block/mmcblk0p17 try 1: No such file or directory
(...)
failed to stat /dev/block/mmcblk0p17
E:Can't open /dev/block/mmcblk0p17
(...)
ro.build.display.id=cm_endeavoru-userdebug 4.2.2 JDQ39E eng.root.20130419.224121 test-keys
[I](...) - leftovers from cyanogenmod?[/I]
ro.build.description=4.18.401.2 CL231174 release-keys
[I](...) - is it the reason? Are these problems because I’m actually downgrading?[/I]
ro.aa.customizationid=559204
ro.aa.romver=4.18.401.2
ro.prot=true
ro.aa.maincid=HTC__001
ro.aa.rid=302
ro.aa.modelid=PJ4610000
ro.aa.report=com
ro.aa.project=ENDEAVOR_U_JB_50_S
ro.aa.skulist=401
ro.aa.taskid=330269
ro.aa.mainsku=401
So the most interesting part is the partition-layout: None is found with fastboot getvar all. I noticed that in almost all (all?) threads where people have problems with unsuccessful stock restore (RUU) or other "stuck on logo" and share their info from getvar there's a one common issue: partition-layout: None. Does anyone have idea what's the reason and how to get it back to partition-layout: Generic (this is the correct one as I assume looking at other threads)? I believe founding a fix for this one general problem would solve all of the mentioned not-booting/stuck-on-logo/soft-bricked issues.
I have no more ideas as I browsed through tons of posts and tried a lot of possible solutions with no effect. I believe there's a need to apply some low-level system "magic" I don't feel like being able to figure out myself. If you have any idea on how to proceed I’d be more than happy to try it out. My last try would be to flash a rom with more up-to-date android, but I'm afraid it would involve updating hboot and no chance to use RUU anymore.
Also, if you think it’s all useless given the state the HOX is in, please share, so I stop to waste my (and your) time - I already spent 2 weeks on it, learned a lot, read hundreds of threads on XDA - If I’d only knew that much before
On the other hand, if any member with magic skills would like to use my HOX to perform remote surgery to try to find a general solution for that problem, I'd be more than happy (well, just happy, I would be more if I could fix it ) to sacrifice my HOX even if there's a chance to kill it definitely.

Any clues guys? Maybe I should ask different question: do you know a method to check if the internal storage is faulty (chkdsk kind of thing)? Maybe my case is helpless (why I can read/write it from recovery, though).
Also, I was thinking about booting recovery (fastboot boot recovery - NOT fastboot flash recovery), hoping it won't read from storage but from memory, thus allowing me to unmount the storage and format (am I correct here? would it help anyway?). The thing is fastboot boot recovery won't work on HOX, but maybe there's a specific way that overrides kernel commandline (fastboot -c ... ) known already.

My HOX is stock, locked and working perfectly, and when I do a fastboot getvar all I also see partition-layout: none, so that cannot be the problem.

webpatrick said:
My HOX is stock, locked and working perfectly, and when I do a fastboot getvar all I also see partition-layout: none, so that cannot be the problem.
Click to expand...
Click to collapse
Thank you webpatrick, good to know that. So this one is not a problem.
I suspect bad sectors then (I wonder if that could be a reason for my HOX to restart on stock and gapps keep crashing on CWM back in the days it was alive). Any idea how to verify that and maybe fix?

Ok, so browsing (way) outside One X forum, I found GPT fdisk compiled for android. It is available in this thread: http://forum.xda-developers.com/showpost.php?p=24805392&postcount=74 or directly http://dl.dropbox.com/u/64885133/gptfdisk.zip. I could use it to load partition data from a backup file, but - obviously - I don't have one.
Could any of you guys run gdisk from the zip, back up GPT data to a file and post it?
Code:
./adb push gdisk /sbin
./adb shell
~ # gdisk /dev/block/mmcblk0
GPT fdisk (gdisk) version 0.8.4
Command (? for help): b
Enter backup filename to save: backup.gpt
The operation has completed successfully.
Command (? for help): q
Thanks in advance!

Couple points more:
1) To clarify, as I believe it matters, I have 32GB version, so I'd enjoy GPT back up for this one. Anyone, pleeeeease?
2) Also, one more question. Correct me if I'm wrong, but I believe that:
a) If I flash firmware manually, I don't have to change the name of the zip file
b) If I "flash" automatically, I need to change the name of the firmware zip to the specific one, PJ46IMG.zip in my case, before I put it on the sd card
Not that I could try b), but just wondering if I've been trying a) in the correct way

Help stuck in a boot loop after installing Viper One

Hi guys, I have been having issues installing viper and I have no idea what is going on. It does not want to work with anything but the stock roms. Phone is s-off, rooted and I have TWRP installed. I have tried TWRP 2.6 and 2.7 with same results. I have also tried 3.11.605.1 firmware.zip &
3.11.605.1 NO Boot.img firmware.zip with same results. I have also made sure to clear the cache. Logs are attached, can anyone point me in the right direction please
C:\today>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 1.13.41.0109_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.11.605.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA37GS904869
(bootloader) imei: 990004280148895
(bootloader) meid: 99000428014889
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3989mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.068s

Did you do a factory reset and you flash the right ROM!
Sent from my HTC One VZW using Tapatalk 4

coldconfession13 said:
Did you do a factory reset and you flash the right ROM!
Sent from my HTC One VZW using Tapatalk 4
Click to expand...
Click to collapse
Should I do a factory reset after installing Viper ? yes I am sure it is the right rom. Here is parts of the install log, it is too long to post on here.
AROMA INSTALLER version 2.70B6
(c) 2013 by amarullz xda-developers
ROM Name : ViperOne
ROM Version : 5.7.0
ROM Author : Team Venom
Device : HTC One
Start at : Fri Mar 14 19:27:42 2014
===========================================
ViperOne 5.7.0 By Team Venom
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extract: /sdcard/Venom/Tools/BuildPropUpdate.sh
Extract: /sdcard/Venom/Tools/ConfigureSettings.sh
Extract: /sdcard/Venom/Tools/CopyLogFile.sh
Extract: /sdcard/Venom/Tools/DeleteDataWithoutMedia.sh
Extract: /sdcard/Venom/Tools/DeleteSystemApp.sh
Extract: /sdcard/Venom/Tools/DeleteUserApp.sh
Extract: /sdcard/Venom/Tools/EnableOTA.sh
Extract: /sdcard/Venom/Tools/ExtraTweaks
Extract: /sdcard/Venom/Tools/FileSystemCheck.sh
Extract: /sdcard/Venom/Tools/SetPropSetting.sh
Extract: /sdcard/Venom/Tools/SetSetting.sh
Extract: /sdcard/Venom/Tools/UpdateDefaultXml.sh
Extract: /sdcard/Venom/Tools/VenomCheck.sh
Extract: /sdcard/Venom/Tools/VenomMod.sh
Extract: /sdcard/Venom/Tools/VenomThemeTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomTweaksBackup.sh
Extract: /sdcard/Venom/Tools/VenomUpdate.sh
Extract: /sdcard/Venom/Tools/fsck.ext4
Extract: /sdcard/Venom/Tools/sqlite3
Extract: /sdcard/Venom/Tools/zip
Extract: /sdcard/Venom/Tools/zipalign
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Extract: /temp/fsck.ext4
Extract: /temp/mkfs.ext4
Extract: /temp/tune2fs.ext4
Setting permissions
about to run program [/sbin/busybox] with 7 a
and the end part
/system/xbin/openvpn
Extract: /system/xbin/rlog.sh
Extract: /system/xbin/sqlite3
Extract: /system/xbin/su
Extract: /system/xbin/sysro
Extract: /system/xbin/sysrw
Extract: /system/xbin/tcpdump
Extract: /system/xbin/unrar
Extract: /system/xbin/venom_functions.sh
Extract: /system/xbin/vim
Extract: /system/xbin/zip
Writing Data
Extract: /data/app/com.adobe.flashplayer-1.apk
Extract: /data/app/com.adobe.reader-1.apk
Extract: /data/app/com.android.chrome-1.apk
Extract: /data/app/com.dropbox.android-1.apk
Extract: /data/app/com.estrongs.android.pop-1.apk
Extract: /data/app/com.facebook.katana-1.apk
Extract: /data/app/com.google.android.apps.maps-1.apk
Extract: /data/app/com.google.android.apps.plus-1.apk
Extract: /data/app/com.google.android.gms-1.apk
Extract: /data/app/com.google.android.marvin.talkback-1.apk
Extract: /data/app/com.google.android.street-1.apk
Extract: /data/app/com.google.android.talk-1.apk
Extract: /data/app/com.google.android.youtube-1.apk
Extract: /data/app/com.htc.backup-1.apk
Extract: /data/app/com.infraware.docmaster-1.apk
Extract: /data/app/com.keramidas.TitaniumBackup-1.apk
Extract: /data/app/com.melodis.midomiMusicIdentifier.freemium-1.apk
Extract: /data/app/com.twitter.android-1.apk
Extract: /data/app/com.zoodles.kidmode-1.apk
Extract: /data/app/mobi.mgeek.TunnyBrowser-1.apk
Extract: /data/app/org.adaway-1.apk
Extract: /data/app/tunein.player-1.apk
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
Generic
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
Extract: /data/system/carrier_icon.png
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Removing User Apps
AdAway
about to run program [/sbin/busybox] with 4 args
Deleting /data/app/org.adaway-1.apk
Removing Google Apps
Removing Venom Apps
Removing System Apps
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
13156+0 records in
13156+0 records out
6735872 bytes (6.4MB) copied, 1.532306 seconds, 4.2MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
about to run program [/system/xbin/busybox] with 4 args
Creating additional symlinks
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 1 in /tmp/VenomSettings.prop
Cleaning Up
Clearing Existing APNs
Wiping dalvik-cache
Wiping Venom Cache
Unmounting partitions
===========================================
New ROM flashed successfully!
===========================================
about to run program [/sbin/busybox] with 4 args
about to run program [/sbin/busybox] with 4 args
script succeeded: result was [0]
Installer Sucessfull (Status 0)
End at : Fri Mar 14 19:29:38 2014

No matter what ROM you are if you are switching do a factory reset
Sent from my HTC One VZW using Tapatalk 4

so the only rom I have been able to successfully boot from is the stock rom

So do a factory reset then flash venom ROM
Sent from my HTC One VZW using Tapatalk 4

factory reset>flash rom>factory reset

Don't have to do a reset after flashing ROM as long as you did it before
Sent from my HTC One VZW using Tapatalk 4

Ok going to try a reset, thanks guys

make sure to read all instructions

HTC One M8 Flashing Rom - set_perm: some changes failed

Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.

I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.

BenPope said:
I'm pretty sure I read this problem yesterday. Have you searched?
Make sure you have the correct recovery for your device.
Click to expand...
Click to collapse
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!

Fizzy99 said:
I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.
Looks like it may be fine now.
Thanks!
Click to expand...
Click to collapse
I had this problem too when I was using M8 TWRP. Verizon variant is named M8_WLV. Using the M8_WLV TWRP I had no issues. XDA thread here: http://forum.xda-developers.com/showthread.php?t=2717928 Hope that helps.

Similar issue on HTC One m8 GPE, no fix yet
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.

gary7135 said:
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.
I have unlocked bootloader & s-off and installed TWRP 2.7.0.2
I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.
And when I reboot, I got a bootloop into recovery.
I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.
I've searched back and forth, and don't see to find solutions here.
Click to expand...
Click to collapse
I am experiencing this same issue on my VZW M8. I am S off also getting failed revolution hd installs. Any fixes?

Fizzy99 said:
Hello,
I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.3.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Wed Apr 23 08:56:03 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.3.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
run_program: child exited with status 255
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 29 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 27 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Wed Apr 23 08:56:34 2014
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Pretty much the same error with Android Revolution
Code:
>>> Installing SQLite Tweaks
set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...
Seems to be an issue with my system, not the rom... anyone have any ideas?
Thanks.
Click to expand...
Click to collapse
Your log file looked similar to mine and I tried everything to get these ROM's to install. I had been trying to install the ROM from the SD card and I had nothing else to try so figured I would copy to the internal SD and give it a shot and that fixed the issues and the ROM installed no problem. Hope this solves your install issue too. Thanks

I am having the same issue on my HTC one m8 verizon version. Trying to flash Android Revolution HD... I've tried having it on internal memory and external and I've made sure I have the right TWRP installed. Every time the install finishes it says set_perm: some changes failed and twrp crashes. Any other ideas?

In case it's helpful for someone, here's a log file. I also read in another thread that someone had success if they wiped /system before trying to install. I'll see if that helps soon.
Code:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : Android Revolution HD
ROM Version : 10.2
ROM Author : mike1986
Device : HTC One (M8)
Start at : Mon Aug 4 12:27:28 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
=================================
Android Revolution HD by mike1986
=================================
>>> Formatting partitions
about to run program [/sbin/umount] with 2 args
umount: can't umount /system: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 23 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p47 on /cache failed: Device or resource busy
run_program: child exited with status 255
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
about to run program [/tmp/wipe.sh] with 1 args
>>> Mounting partitions
about to run program [/sbin/mount] with 2 args
about to run program [/sbin/mount] with 2 args
mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
run_program: child exited with status 255
>>> Cleaning process
about to run program [/tmp/clean.sh] with 1 args
>>> Writing Data & System
about to run program [/sbin/busybox] with 5 args
about to run program [/sbin/sync] with 1 args
>>> Copying U.S. Verizon related files
>>> Installing Google Chrome
>>> Installing Google Maps & Google Street
>>> Installing Google Music
>>> Installing Google Plus
>>> Installing Google Now
>>> Installing Google Keep
>>> Installing Google Hangouts
>>> Installing Google YouTube
>>> Installing Google Drive
>>> Installing ES File Explorer
>>> Installing Facebook
>>> Installing Adobe Flash Player
>>> Installing Adobe Reader
>>> Installing Twitter
about to run program [/sbin/busybox] with 3 args
mkdir: can't create directory '/system/bin/.ext': No space left on device
run_program: child exited with status 1
about to run program [/sbin/busybox] with 4 args
cp: can't stat '/system/xbin/su': No such file or directory
run_program: child exited with status 1
>>> Installing Sense 6 Toolbox & Xposed
>>> Creating toolbox symlinks
>>> Creating additional symlinks
>>> Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Mon Aug 4 12:28:54 2014
EDIT:
Wiping /system before flashing the rom was a success! No hitches at all, and had it up and running. However, since it's a verizon device, apparently the firmware isn't out yet. Because of this I had no wifi and really long boot times. I'm gonna flash back to stock until the firmware is released with the next verizon software update. Happy flashing everyone!

The solution that worked for me
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.

mcarnevale said:
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)
The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.
I followed the instructions found here: http://forum.xda-developers.com/showthread.php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.
Click to expand...
Click to collapse
Hey guys
I had this same issue and here is what i did.
Boot into CWM
wipe as usual
->Mounts and Storage->format system ->format Data ->Format Cache
->install zip ->your rom
voila!
Worked for me. Thank me if it helps

[Q] Viper one rom 1.6.0 not installing on my htc one m8

I have tried to install viper one 1.6.0 and it almost completely installs but then fails and the last line before the "install failed" screen says "set_perm: some changes failed" and then says, on the next screen, "Error ViperOneM8 v1.6.0 install failed Installer Status: 7 Please save the log file and post it in the ViperOne thread." I'm using TWRP.
here's the log file:
AROMA Installer version 2.70RC2
(c) 2013 by amarullz xda-developers
ROM Name : ViperOneM8
ROM Version : 1.6.0
ROM Author : Team Venom
Device : HTC One M8
Start at : Sun Sep 14 22:24:23 2014
I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
load_volume_table: Can't get the /proc/emmc table
===========================================
ViperOneM8 1.6.0 By Team Venom
about to run program [/sbin/getprop] with 2 args
m8
about to run program [/sbin/getprop] with 2 args
m8
Be patient - 1st boot may take a while
===========================================
Extracting tools
Installing Venom Tools
Extracting Build Tools
about to run program [/sbin/busybox] with 3 args
Setting permissions
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 7 args
Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
Formatting /system
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Warning: the fs_type small is not defined in mke2fs.conf
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
5632 inodes, 22528 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=25165824
1 block group
32768 blocks per group, 32768 fragments per group
5632 inodes per group
Writing inode tables: 0/1done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 22 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Formatting /cache
about to run program [/sbin/mke2fs] with 6 args
mke2fs 1.41.14 (22-Dec-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
172032 inodes, 688128 blocks
0 blocks (0.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=704643072
21 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: 0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 21 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Wiping /data except for /data/media
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
system files from SD Card
about to run program [/sbin/sleep] with 2 args
Extracting Files
Writing System
about to run program [/sbin/busybox] with 3 args
about to run program [/sbin/busybox] with 3 args
Writing Data
Installing Mods
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
Installing Viper Boot
about to run program [/sbin/busybox] with 7 args
Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
about to run program [/sbin/busybox] with 7 args
Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 7 args
Setting ConfigExists to 1 in /tmp/VenomSettings.prop
about to run program [/sbin/busybox] with 5 args
/sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
run_program: child exited with status 127
about to run program [/sbin/busybox] with 7 args
Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
about to run program [/sbin/busybox] with 7 args
Setting KernelExists to 0 in /tmp/VenomSettings.prop
about to run program [/sbin/dd] with 3 args
16524+0 records in
16524+0 records out
8460288 bytes (8.1MB) copied, 1.641202 seconds, 4.9MB/s
Kernel Flashed.
Finalizing Install
Creating toolbox symlinks
Installing busybox
set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed
Installer Error (Status 7)
End at : Sun Sep 14 22:24:55 2014

Seems busybox is corrupt.
Why not Viper 2.4 ?

It no work.....
Razorback88 said:
Seems busybox is corrupt.
Why not Viper 2.4 ?
Click to expand...
Click to collapse
I tried installing 2.4 and it had the same issue, albeit probably with a different log.

check ur download, might be corrupted. or try different rom

aorigin said:
I tried installing 2.4 and it had the same issue, albeit probably with a different log.
Click to expand...
Click to collapse
Try installing with Philz recovery.

MrKhozam said:
Try installing with Philz recovery.
Click to expand...
Click to collapse
How do you install philz? I already have twrp and don't know how to switch it and I haven't found anything helpful while researching.

aorigin said:
How do you install philz? I already have twrp and don't know how to switch it and I haven't found anything helpful while researching.
Click to expand...
Click to collapse
Download the latest Philz file from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/m8, put your phone into bootloader mode, open a command prompt, and type "fastboot flash recovery philz_touch_x.xx.x-m8.img" (replace the 'x's with the version number). When it's done, you can reboot into recovery by typing "fastboot reboot" on the command prompt.

MrKhozam said:
Download the latest Philz file from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/m8, put your phone into bootloader mode, open a command prompt, and type "fastboot flash recovery philz_touch_x.xx.x-m8.img" (replace the 'x's with the version number). When it's done, you can reboot into recovery by typing "fastboot reboot" on the command prompt.
Click to expand...
Click to collapse
Thank you for your help so far. It keeps giving the same error message even in philz.

THANK YOU SOO MUCH!!!!!!!!!! I finally got gapps to work with cyanogenmod which was my goal before viper.Thank you soo much for refering me to philz!!!!!!!

aorigin said:
THANK YOU SOO MUCH!!!!!!!!!! I finally got gapps to work with cyanogenmod which was my goal before viper.Thank you soo much for refering me to philz!!!!!!!
Click to expand...
Click to collapse
No problem :good: