Note: This is a work in progress.
Note: All Image manipulation is done with GIMP.
Note: This guide is mainly for the A101 but can also be applied for the A70.
I was getting sick of not be able to take a good picture and use it as a wallpaper so that it looked good. I know there is an alternative "MultiPicture Live Wallpaper" but that thing is a memory hog.
PART 1
So I came up with this picture it's a PNG of 1200x1024. The different grids are the following sizes.
Blue: 8px
Green: 16px
Red: 32px
White: 64px
When this is set as a wallpaper we can finally see what is happening to the image.
Here are the screenshots for the 5 screens of the Stock Launcher of the Archos 101.
Screen 1
Screen 2
Screen 3
Screen 4
Screen 5
Since the status bar can not be hidden on the Stock Launcher we loose 32px at the top and on the right with the soft buttons we loose 40px. When positioned on the first screen we have a good view of the top left corner (1024x600) of the reference picture.
Now lets get to work with this picture below.
Size: 1680x1050
So what do we need to do. The result must be an image with a size of 1200x1024 for the A101 and 960x800 for the A70 where only the top 600px (A101) 480px (A70) will be visible in landscape mode.
Scaling the image to a height of 600px and keeping the aspect in mind. The result is a picture of 960x600
On the bottom add a 424px black border.
On both sides add a 120px black border.
and the result is
Size: 1200x1024
And the screenshot to prove it works.
This was tested with the Stock Launcher and ADW.Launcher.
PART 2
So this worked out because the original picture has a black background. So here is the solution for other pictures.
I made a multi layer xcf file with GIMP to address the problem. You can download it here for the A101 and here for the A70.
Open WallPaper_cropping.xcf in GIMP.
Select the "Background" layer.
File -> Open as Layer -> select the picture you want to crop.
Scale the layer to 1200px width and keep the aspect correct.
Position the layer so that the visible part looks good.
Turn visibility on/off so that only the layers "Background:, "The Picture", "Black Not Visible Part" are turned on.
Save the image as PNG with option "Merge Visible Layers"
Send to archos and apply as wallpaper with the Crop Wallpaper app and use the "Overall" button.
This is all for today. Next We'll see if we can do something with extending the background instead of cropping it.
Reserved for future use
Reserved for future use 2
reserved for thanks ;-)
many thanks
Worked fine for landscape But when I turn it portrait there is a black bar at the bottom - How do I get it to fill in that black space??
Using ADW Launcher if that has any effect on it...
Would put up a screenshot but the forum won't let me...
martinjh99 said:
Worked fine for landscape But when I turn it portrait there is a black bar at the bottom - How do I get it to fill in that black space??
Click to expand...
Click to collapse
There is no way to do both landscape and portrait at the same time. So you have to choose.
ah ok- Thanks anyway.
Thanks wdl1908. It will be difficult for me to explain because of my poor english. But with your settings and my A70it it didn't (the image was too high). So I have set the top of my image at 183px and the bottom at 644px and now it's perfect. Maybe someone with skills could check those values cause I'm a newbie.
Thank you very much.
nikokroko said:
Thanks wdl1908. It will be difficult for me to explain because of my poor english. But with your settings and my A70it it didn't (the image was too high). So I have set the top of my image at 183px and the bottom at 644px and now it's perfect. Maybe someone with skills could check those values cause I'm a newbie.
Click to expand...
Click to collapse
If you attach your original wallpaper I'll look at it to see what the best method is.
So this is my actual wallpapaper. In landscape I see everything of the middle layer and not the 2 others (normal). And in portrait I don't see the face of the guy on the first layer. But this is not important cause those layers are just there to fill the blanks in portrait mode.
The original picture was found on socwall and was 2500*1324px
nikokroko said:
So this is my actual wallpapaper. In landscape I see everything of the middle layer and not the 2 others (normal). And in portrait I don't see the face of the guy on the first layer. But this is not important cause those layers are just there to fill the blanks in portrait mode.
The original picture was found on socwall and was 2500*1324px
Click to expand...
Click to collapse
Very nice wallpaper. I usually don't bother with the portrait mode as long as the landscape mode is shown correctly. I would just cut out the middle part and use that to fit into the portrait visible part of the template.
On your phone, open this YouTube url: http://www.youtube.com/watch?v=gIA_4nV-CqE
Pause it within the first 3 seconds on the red screen. Make the video full screen. Look closely at the display, do you notice a grid of dots on your screen? Whenever I have something with a red background, I always notice black small dots (like a grid) on the screen... Does your phone have this?
Hi everyone, just wanted to check and ask if some users also has this on the upper portion of the screen, is this white inconsistency bleeding? please check using LCD test on black background on 100 percent brightness. it is not noticeable on normal conditions though. Thanks.
Yup. Got it on the left-upper corner of lcd. But it has shown only after recent installation of Xenon HD ROM.
Hello guys.
Install dead pixel test from play store and navigate to the grey screen by tapping or.
Open a full grey background on Google.
Go max brightness. Do you see a lot of smudges / dirty screen effect blotches? Or is it just my screen. They would look like darker spots on the grays. I have a lot of them of arbitrary size. More than any other lcd panel I owned.
Thanks
Hi,
I came from the One M8 only yesterday. I had to use image2wallpaper to make my wallpaper fit but olt only showed it in a small square rather than using the whole screen.
Tried to apply my wallpaper using the OP3 settings and it only shows part of the image as it's spread across multiple displays even though I'm only using be screen.
What app can I use or how can I have my wallpaper show on the full screen rather than just part or in a square and not using the full screen as I'd like?
Try this one, it's my go-to for these kinds of things! If you don't like that, then maybe this one has what you need!
I resized a jpg to 1920x1920 and it fit fine. It also was able to "slide" as you swiped from screen to screen.