Is there a way to remove Carrier IQ from the G3 yet? I've followed a couple ways to do it yet the detectors still show it as not only present but active. I've opted out of the diagnostic collection but also disabled the apks as well as this http://www.reddit.com/r/LGG3/comments/2bkl60/remove_carrier_iq_off_of_lg_g3_all_models/
Cant you remove it with root?
helikido said:
Cant you remove it with root?
Click to expand...
Click to collapse
I am rooted. I've frozen the 3 system management apps and denied them the permissions they need to be able to run but the detectors still say its active. Could the detectors be not working since the phone is so new? I've also frozen LTDDM.apk too .
The detectors probably just search to see if it exists in the phone. So they most likely cannot recognize if it is running or not.
helikido said:
The detectors probably just search to see if it exists in the phone. So they most likely cannot recognize if it is running or not.
Click to expand...
Click to collapse
Thats what I'm hoping. I looked at the running processes and none of it is in there. Just annoying that its on there in the first place.
johnomaz said:
Thats what I'm hoping. I looked at the running processes and none of it is in there. Just annoying that its on there in the first place.
Click to expand...
Click to collapse
Everything you need to know to turn it off.
http://forum.xda-developers.com/showpost.php?p=54609278&postcount=5
johnomaz said:
Thats what I'm hoping. I looked at the running processes and none of it is in there. Just annoying that its on there in the first place.
Click to expand...
Click to collapse
I had Carrier IQ on a TMO Galaxy Light and in addition to freezing the apps with Titanium Backup there are three apk's in System>Priv-App that relate to Carrier IQ - they are:
IQ-tmobile-release-unsigned.signed_TMO.apk
IQToggle.signed_TMO.apk
IQ_OOB_TMO.apk
I renamed them with a .bak extension because I read somewhere that CIQ is still sending information to TMO whether it's frozen or not (and even though T-Mobile claims that they don't use it!
Seems to work because I cannot see them in running apps (using GSAM Pro)
jimmydigital00 said:
Everything you need to know to turn it off.
http://forum.xda-developers.com/showpost.php?p=54609278&postcount=5
Click to expand...
Click to collapse
Thank you. I searched for something but that didn't come up.
johnomaz said:
Thank you. I searched for something but that didn't come up.
Click to expand...
Click to collapse
Its some work but i guess it works.
You can opt out of it using the t-mobile app that comes on the phone. Go to the device health and opt to turn it off, then go to advanced tab and shut that off too.
Semantics said:
You can opt out of it using the t-mobile app that comes on the phone. Go to the device health and opt to turn it off, then go to advanced tab and shut that off too.
Click to expand...
Click to collapse
Yes, you can do that, but I'm not sure if that just disables it from sending phone data or stops it from running as well in the background processes.
Some of the CIQ modules are used by TMo for their My Account and other apps on the phone as well, including the device diagnostics reminder, when you call up support, it sends your device info to them on call, etc, unless you uncheck all of those options, not just the CIQ disclaimer and diagnostics.
Those other options are in the TMo My Account app and then you need uncheck all the boxes in its settings for those abilities.
The removal of CIQ takes it away from the phone completely, thus removing the capability of your phone data (including SMS and calls) being sent and the battery and CPU tasking it used.
I actually just found the settings in the My TMobile app. It told me my device was healthy so I was turning off that thing and noticed the more hidden diagnostics option and the other settings.
Back in my OmniRom/Note 2 days, I used delete scripts/zips to automatically clean up after nightly flashes. I created a CIQ_Delete zip using the template from the following thread. Thanks to @RaphaDroid for the template and thanks to @vicvega for the guide.
http://forum.xda-developers.com/showthread.php?t=2575966
This zip deletes the following:
"/system/app/LTDDM.apk",
"/system/priv-app/IQ-tmobile-release-unsigned.signed.apk",
"/system/priv-app/IQToggle_v1.1.3.signed.apk",
"/system/priv-app/IQ_OOB_v1.6_forLG.signed.apk",
"/system/lib/libiq_service_tmobile_2.2.so",
"/data/data/com.carrieriq.tmobile",
"/data/data/com.carrieriq.tmobile.IQOOB",
"/data/data/com.carrieriq.tmobile.IQToggle"
I ran Voodoo CIQ Detector before and after. After a flash in recovery, the detector comes up clean. Nothing detected or running. A perfect score.
Understand, this should only be used after the phone has been setup!! It's my understanding that if the apks are deleted before hand, the setup wizard gets messed up. Probably because of the diagnostic option during setup. Again, this zip should only be used after a dirty flash or after the initial setup on a fresh install. You may want to back up the apks before deleting just in case you want to do a factory reset instead of a clean flash. That way you can get through the initial setup of the phone.
I take no responsibility if you futz up your phone. I just wanted makes things a bit easier by automating the process. You can also follow vivega's guide (linked above) to manually rid yourselves of this nuisance.
Also note: I used the xposed toggle and one time viper4android zips from that same thread. They both work after dirty flashes. Another time saver.
You can honestly just delete the .apk.
Source: Been running phone without those horrendous apks for about 3 weeks without a sinch.
Sent from my LG-D851 using XDA Free mobile app
Cablespider said:
Back in my OmniRom/Note 2 days, I used delete scripts/zips to automatically clean up after nightly flashes. I created a CIQ_Delete zip using the template from the following thread. Thanks to @RaphaDroid for the template and thanks to @vicvega for the guide.
http://forum.xda-developers.com/showthread.php?t=2575966
This zip deletes the following:
"/system/app/LTDDM.apk",
"/system/priv-app/IQ-tmobile-release-unsigned.signed.apk",
"/system/priv-app/IQToggle_v1.1.3.signed.apk",
"/system/priv-app/IQ_OOB_v1.6_forLG.signed.apk",
"/system/lib/libiq_service_tmobile_2.2.so",
"/data/data/com.carrieriq.tmobile",
"/data/data/com.carrieriq.tmobile.IQOOB",
"/data/data/com.carrieriq.tmobile.IQToggle"
I ran Voodoo CIQ Detector before and after. After a flash in recovery, the detector comes up clean. Nothing detected or running. A perfect score.
Understand, this should only be used after the phone has been setup!! It's my understanding that if the apks are deleted before hand, the setup wizard gets messed up. Probably because of the diagnostic option during setup. Again, this zip should only be used after a dirty flash or after the initial setup on a fresh install. You may want to back up the apks before deleting just in case you want to do a factory reset instead of a clean flash. That way you can get through the initial setup of the phone.
I take no responsibility if you futz up your phone. I just wanted makes things a bit easier by automating the process. You can also follow vivega's guide (linked above) to manually rid yourselves of this nuisance.
https://drive.google.com/file/d/0BwSqv98uXvFVdFhJZHJzVllxTzQ/edit?usp=sharing
Also note: I used the xposed toggle and one time viper4android zips from that same thread. They both work after dirty flashes. Another time saver.
Click to expand...
Click to collapse
I dont see a zip there
Carrier IQ Zip
Here you go. Sorry if I was not supposed to post this here. Just trying to help. :good:
Thanks and credit goes to Cablespider. He totally rocks for making this zip. Hit his thanks button if you can.
I didn't even think of attaching it to the post. Thanks!
Cablespider said:
I didn't even think of attaching it to the post. Thanks!
Click to expand...
Click to collapse
Thank you very much
Cablespider said:
I didn't even think of attaching it to the post. Thanks!
Click to expand...
Click to collapse
Thanks Cablespider works great!
Cablespider said:
Back in my OmniRom/Note 2 days, I used delete scripts/zips to automatically clean up after nightly flashes. I created a CIQ_Delete zip using the template from the following thread. Thanks to @RaphaDroid for the template and thanks to @vicvega for the guide.
http://forum.xda-developers.com/showthread.php?t=2575966
This zip deletes the following:
"/system/app/LTDDM.apk",
"/system/priv-app/IQ-tmobile-release-unsigned.signed.apk",
"/system/priv-app/IQToggle_v1.1.3.signed.apk",
"/system/priv-app/IQ_OOB_v1.6_forLG.signed.apk",
"/system/lib/libiq_service_tmobile_2.2.so",
"/data/data/com.carrieriq.tmobile",
"/data/data/com.carrieriq.tmobile.IQOOB",
"/data/data/com.carrieriq.tmobile.IQToggle"
I ran Voodoo CIQ Detector before and after. After a flash in recovery, the detector comes up clean. Nothing detected or running. A perfect score.
Understand, this should only be used after the phone has been setup!! It's my understanding that if the apks are deleted before hand, the setup wizard gets messed up. Probably because of the diagnostic option during setup. Again, this zip should only be used after a dirty flash or after the initial setup on a fresh install. You may want to back up the apks before deleting just in case you want to do a factory reset instead of a clean flash. That way you can get through the initial setup of the phone.
I take no responsibility if you futz up your phone. I just wanted makes things a bit easier by automating the process. You can also follow vivega's guide (linked above) to manually rid yourselves of this nuisance.
Also note: I used the xposed toggle and one time viper4android zips from that same thread. They both work after dirty flashes. Another time saver.
Click to expand...
Click to collapse
You should make a separate thread and add it. This is great and does help with battery life. Less laggy to
Related
I just installed bugless, don't like it, I want to try out Damage, I'm using ROM Manager, do I have to uninstall bugless 1st, or can I just go to ROM Manager and install another rom over what I have now?
My phone doesnt have any apps or anything that I need to back up.
jontorres said:
I just installed bugless, don't like it, I want to try out Damage, I'm using ROM Manager, do I have to uninstall bugless 1st, or can I just go to ROM Manager and install another rom over what I have now?
My phone doesnt have any apps or anything that I need to back up.
Click to expand...
Click to collapse
just install damage next, just select wipe when it asks you in rom manager
You just flash the new rom. If you ever switch 'base build #'s', like android base 2.1 to 2.2 for example, then you should clear you cache and all data before flashing.
It would be a good idea to check make a backup in rom manager just in case something goes strange during the new flash.
Sent from my Droid using Tapatalk
timgt said:
just install damage next, just select wipe when it asks you in rom manager
Click to expand...
Click to collapse
so the wipe practically removes the previous install....doesnt leave anything behind?
jontorres said:
so the wipe practically removes the previous install....doesnt leave anything behind?
Click to expand...
Click to collapse
yes, it basically starts fresh. Wipes the data, cache, etc.
By the way, only reason im leaving bugless is Sprint Nav, TV and Voicemail are gone....these aren't available to install individually?
Well, and also leaving it bcus it wasn't quite bugless, was giving erros when changing settings on the phone, and while using some of the phones features.
jontorres said:
By the way, only reason im leaving bugless is Sprint Nav, TV and Voicemail are gone....these aren't available to install individually?
Well, and also leaving it bcus it wasn't quite bugless, was giving erros when changing settings on the phone, and while using some of the phones features.
Click to expand...
Click to collapse
I'm pretty sure if you searched you would find them.
Here's sprint TV
Albaholic said:
I'm pretty sure if you searched you would find them.
Click to expand...
Click to collapse
Thanks for the link, but no I wouldnt have found it as I wasnt aware these were available as stand alone, where would i find the rest of them?
Gee, maybe if you would of took my advice to begin with over at AF, and just started flashing them all and try them out. They all have pros and cons, it's all about what works best for you
Just an FYI, try out damage control, it's got everything you want. If there is anything you don't want just delete it. Same with fresh.
Installed Damage Control...will be a keeper.
jontorres said:
Installed Damage Control...will be a keeper.
Click to expand...
Click to collapse
Also depending on how your rooted, you can use a file manager to delete the apps that you don't want.
Roman G said:
Also depending on how your rooted, you can use a file manager to delete the apps that you don't want.
Click to expand...
Click to collapse
I used that step by step tutorial posted on AF.
Only think im wondering about is when i originaly installed bugless it was via ROM Manager, and when it asks you do you want to backup current ROM and wipe, I said yes to both, wasnt sure what ROM it was backing up as the only thing so far I had done to my phone was going through the full root process.
this time around when I installed DC I didnt select the option in ROM Manager to backup current ROM, still not sure it that questions pertains to the current installed rom, or the one being installed.....but in any case my internal phone storage says 313, and SD out of 7.41 5.85 is avail.
I used Astro to see if I identified anything from previous rom, but then again I wouldnt even know what to look for....hopefully I don't have any useless files lingering around taking up space.
jontorres said:
I used that step by step tutorial posted on AF.
Only think im wondering about is when i originaly installed bugless it was via ROM Manager, and when it asks you do you want to backup current ROM and wipe, I said yes to both, wasnt sure what ROM it was backing up as the only thing so far I had done to my phone was going through the full root process.
this time around when I installed DC I didnt select the option in ROM Manager to backup current ROM, still not sure it that questions pertains to the current installed rom, or the one being installed.....but in any case my internal phone storage says 313, and SD out of 7.41 5.85 is avail.
I used Astro to see if I identified anything from previous rom, but then again I wouldnt even know what to look for....hopefully I don't have any useless files lingering around taking up space.
Click to expand...
Click to collapse
The one that you are backing up is the one that you are currently using. It is always a good idea to backup the current Rom. I always do right after I flash and verify everything is golden, and also after I get everything set up.
I find it easier just gong through recovery, than using the rom manager.
Roman G said:
The one that you are backing up is the one that you are currently using. It is always a good idea to backup the current Rom. I always do right after I flash and verify everything is golden, and also after I get everything set up.
I find it easier just gong through recovery, than using the rom manager.
Click to expand...
Click to collapse
Yeah rom manager took about an hour, not sure why....i was afraid to stop it mid stream and do it manually.
In anycase Damage Control is perfect, I also added Launcher Pro, that way I can switch to sense once in a while, or the launcher that was on the rom, or launcher pro, this way I can switch it up once in a while to not get bored...other than that this rom is perfect, bugless had too many issues, and was too blah.
jontorres said:
Thanks for the link, but no I wouldnt have found it as I wasnt aware these were available as stand alone, where would i find the rest of them?
Click to expand...
Click to collapse
From Flipz Fresh ROM thread
flipzmode said:
Amazon mp3 *
GSD #
HTC FM Radio
HTC Footprints and widget
HTC Mobile Guide *
HTC Navigation Panel
HTC Ringtone Trimmer
HTC Stocks and widget
Quick Office *
SDSA (Sprint Self Service) *
Sprint Nascar *
Sprint Navigation *
Sprint NFL *
Sprint Promotion *
Sprint WiFi Router
Teeter
Voice Search (I am constantly hitting it on accident while using my phone with one hand. I have also had issues with it killing audio on the phone). *
Removed apk's can be downloaded here and pushed back to the phone if you have problems with the sdcard method.
Click to expand...
Click to collapse
I'm kinda new at this. I know about being able to use backups with TWRP and I know about MW Apps Manager but that's about it. Please make suggestions of how I can improve the experience of using the Note 4.
doctor-cool said:
I'm kinda new at this. I know about being able to use backups with TWRP and I know about MW Apps Manager but that's about it. Please make suggestions of how I can improve the experience of using the Note 4.
Click to expand...
Click to collapse
I'm going to assume that you have already installed the TWRP custom recovery. You probably already know that you have to do that before you can obtain root. Aside from being able to flash custom ROMs, none available right now, there are a number of apps that you can install that do a number of things that you cannot do without root. I'll list a few that I use and what they do but the list is not all encompassing:
--Titanium Backup (root)--a great tool for freezing unwanted apps, backing up apps/data etc
--Greenify--enables you to set user installed apps to "hibernate" a few minutes after you have finished using them. Significantly improves battery life.
--LagFix--an app, when run, that can eliminate "lag" when/if it occurs on the phone most of the time.
--SD Maid--a great file manager app that enables you to control which apps start at power on, enables the user to really clean out cache, duplicate files, orphaned files and compact databases. Saves memory resources and keeps your phone running smooth and clean.
--adaway--as the name implies, keeps those pesky little ads from showing up in apps.
--exposed--a favorite of many users. Enables you to customize a number of settings, notifications etc.
That's the apps I use that can only be run with root. I'm sure some other users will chime in here an provide some other things that root offers.
Thanks , I got root last night
First are there things I should enable or disable to protect root. Is it OK to run the My Verizon app and VZ Protect. Are there any applications that I should not run?
doctor-cool said:
First are there things I should enable or disable to protect root. Is it OK to run the My Verizon app and VZ Protect. Are there any applications that I should not run?
Click to expand...
Click to collapse
You can run anything you want, it's not going to hurt root. Root is really only a door, or access, to settings/system files that you wouldn't normally have. Any app that you can run without root can be run safely with root. The opposite is not true. There are a number of apps that cannot be run without root. A good way to find most of the apps that require root is to go to the Play Store and just search for "root apps". There's a bunch out there that you may want to try.
---------- Post added at 08:31 AM ---------- Previous post was at 08:24 AM ----------
doctor-cool said:
First are there things I should enable or disable to protect root. Is it OK to run the My Verizon app and VZ Protect. Are there any applications that I should not run?
Click to expand...
Click to collapse
The only thing you have to be aware of to protect root is taking an OTA update. Now that you have a custom recovery and root the likely hood that you would be able to find and download an OTA is not likely, but if by chance you receive a notice that an OTA is available do not download and install it. If by chance the phone automatically downloads it and tries to install it, the OTA should fail so you'll be alright.
Be careful not to flash or ODIN a retail firmware. That is probably the biggest warning I can offer. Retail firmware, when flashed, will lock your bootloader. You can flash a modem or a kernel or a recovery, but not the entire firmware .tar md5 file.
---------- Post added at 08:47 AM ---------- Previous post was at 08:31 AM ----------
doctor-cool said:
First are there things I should enable or disable to protect root. Is it OK to run the My Verizon app and VZ Protect. Are there any applications that I should not run?
Click to expand...
Click to collapse
By the way. Since you are new to root and custom recoveries, the first thing you should do, right now, is do a backup. Power off your phone, go into TWRP recovery (hold down the volume up, home and power buttom all at the same time). Continue to hold them down until you see the TWRP splash screen, then you can let them go. From the on screen menu select backup. Choose which file you want backed up. I recommend you do boot, system, data, modem, EFS and recovery as a minimum. After the backup is complete return to the main menu and select reboot. Do it right now
wifi hotspot
I have already paid for FoxFi and it works great even without root.
But now, how do I get the free wifi hotspot with root What are the advantages of using it?
doctor-cool said:
I have already paid for FoxFi and it works great even without root.
But now, how do I get the free wifi hotspot with root What are the advantages of using it?
Click to expand...
Click to collapse
I'm not sure, I don't use it. But, if I remember correctly I think you go into settings>more networks>and turn on mobile hotspot. But again, I don't use it so I'm not sure. Have you done your backup yet? It is the only safety net you will have until a developer releases a ROM we can flash. Don't look for Samsung to release any firmware for the Developer Edition...it ain't going to happen. Your backup and TWRP are the ONLY safety net you have right now. I can't emphasize that enough.
jpcalhoun said:
I'm not sure, I don't use it. But, if I remember correctly I think you go into settings>more networks>and turn on mobile hotspot. But again, I don't use it so I'm not sure. Have you done your backup yet? It is the only safety net you will have until a developer releases a ROM we can flash. Don't look for Samsung to release any firmware for the Developer Edition...it ain't going to happen. Your backup and TWRP are the ONLY safety net you have right now. I can't emphasize that enough.
Click to expand...
Click to collapse
Thanks ,Yes I did the backups last night before and after root default and complete. I even tested Restoring a backup before I rooted. I hope I got it
doctor-cool said:
Thanks ,Yes I did the backups last night before and after root default and complete. I even tested Restoring a backup before I rooted. I hope I got it
Click to expand...
Click to collapse
Outstanding. Didn't want to "harp" on the backup thing, but I've seen so many users root, TWRP and then do something to brick their phone and they didn't have a backup. They were screwed.
Automatic Back Up?
jpcalhoun said:
Outstanding. Didn't want to "harp" on the backup thing, but I've seen so many users root, TWRP and then do something to brick their phone and they didn't have a backup. They were screwed.
Click to expand...
Click to collapse
We should probably do a backup on a schedule. Someone could make an app that does a back up automatically on a schedule. I'm going to put Back Up Note 4 on my calender then back it up
doctor-cool said:
We should probably do a backup on a schedule. Someone could make an app that does a back up automatically on a schedule. I'm going to put Back Up Note 4 on my calender then back it up
Click to expand...
Click to collapse
It's diffidently a good idea to have a recent backup and the original backup of your stock ROM. The only problem with a lot of backups is keeping straight what backup is what and the amount of space they consume. Memory is cheap I know, but backups can eat up storage real fast, LOL.
Yes. Agree with space but every backup I do, I also have my TWRP folder sync'd to my Dropbox account. So what ever changes are made go their. I also save them on the laptop as well as a thumb drive. Been burned once on my note 3. Now, is there the stock md5 file for the developers edition like on the note 3's?
Sent from my SM-N910V using Tapatalk
GreenGoblin227 said:
Yes. Agree with space but every backup I do, I also have my TWRP folder sync'd to my Dropbox account. So what ever changes are made go their. I also save them on the laptop as well as a thumb drive. Been burned once on my note 3. Now, is there the stock md5 file for the developers edition like on the note 3's?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
No there is not a stock md5 for the DE and there most likely will not be. In the past Samsung has never released a firmware package for their DE phones, not that I have ever seen anyway. What your phone came with is what you got. NO OTAs and no updates of any kind in the future...that's if Samsung behaves like they have in the past. That's why making a good back up of your stock (no root) when you first get recovery is so important. And, making a backup after root of course.
Do you mind me asking how you sync..............
GreenGoblin227 said:
Yes. Agree with space but every backup I do, I also have my TWRP folder sync'd to my Dropbox account. So what ever changes are made go their. I also save them on the laptop as well as a thumb drive. Been burned once on my note 3. Now, is there the stock md5 file for the developers edition like on the note 3's?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
your TWRP folder to your Dropbox account.. Did you transfer the folder to your computer first or can you sync the folder on your phone to DropBox directly ?
I use dropsync select the folder and it just does it automatically.
Sent from my SM-N910V using Tapatalk
jpcalhoun said:
I'm going to assume that you have already installed the TWRP custom recovery. You probably already know that you have to do that before you can obtain root. Aside from being able to flash custom ROMs, none available right now, there are a number of apps that you can install that do a number of things that you cannot do without root. I'll list a few that I use and what they do but the list is not all encompassing:
--Titanium Backup (root)--a great tool for freezing unwanted apps, backing up apps/data etc
--Greenify--enables you to set user installed apps to "hibernate" a few minutes after you have finished using them. Significantly improves battery life.
--LagFix--an app, when run, that can eliminate "lag" when/if it occurs on the phone most of the time.
--SD Maid--a great file manager app that enables you to control which apps start at power on, enables the user to really clean out cache, duplicate files, orphaned files and compact databases. Saves memory resources and keeps your phone running smooth and clean.
--adaway--as the name implies, keeps those pesky little ads from showing up in apps.
--exposed--a favorite of many users. Enables you to customize a number of settings, notifications etc.
That's the apps I use that can only be run with root. I'm sure some other users will chime in here an provide some other things that root offers.
Click to expand...
Click to collapse
I'm assuming that the Greenify is the one with the leaf?
Is LagFix the purchase version? Is it an app by itself, or does it require exposed?
Do you use the SD Maid Pro Version?
Does the Adaway require exposed as well?
Thanks so much in advance.
Just getting the word out to everyone. This works without root and makes it super easy for you to remove any Bloatware you would like and fully control it.
http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
Thank you Sir! :highfive:
PRoot.com said:
Thank you Sir! :highfive:
Click to expand...
Click to collapse
Your welcome.
Already discussed in a previous thread. It only allows blocking the Apps. Absolute removal of Apps require Root.
ZPaul2Fresh8 said:
Already discussed in a previous thread. It only allows blocking the Apps. Absolute removal of Apps require Root.
Click to expand...
Click to collapse
That's a big deal to a lot of people though. For a lot of people who do not have root and are on KitKat, they can completely block packages on their phone that they otherwise could not. Sure, they allow you to block / disable certain ones on the phone itself, but not anything. This allows them to block any package, Knox included. And sure they could download a script, modify it for their purposes and create another script to unblock and so on and so on. But this maintains nothing and interacts with their device directly. Nothing to maintain and nothing to edit, etc. etc..
Anybody got a list of app that's safe to block. Don't want to cause an endless boot.
here's my complete script I have handy, after testing things and trying a few things without success, my phone many times would automatically erase all data and do a factory reset in the end of my failed experiments. Either that or I'd have to resort to that Odin package someone posted on here to flash back to stock. I think I've flashed my phone using that Odin package around 12 times now after downgrading from the forced updated NK3 back to original. I immediately run this script after enabling Developer options and enabling USB Debugging.
Just right click on the script and Run As Administrator on Vista,Win 7, Win 8 and Win 10.
**Make sure to have the 3 required Adb files to run Adb to communicate with device. I attached those 3 main files which you can extract to c:\windows\system32. This way you can run adb commands from any location on the computer since System32 is included in the environment variables for the OS
saunupe1911 said:
Anybody got a list of app that's safe to block. Don't want to cause an endless boot.
Click to expand...
Click to collapse
Jump on the forum thread, I have built in export and import of blocked packages support built in, someone will give you a list.
I Thank you Sir ... that is a nice, clean app that's works well, but I do have one suggestion for an improvement if you are open to it.
I like the fact that it has a filter function, but the filter only works on the name in the apk name, not the package name. It would be really sweet if it would search both areas. :good:
Dimarini said:
I Thank you Sir ... that is a nice, clean app that's works well, but I do have one suggestion for an improvement if you are open to it.
I like the fact that it has a filter function, but the filter only works on the name in the apk name, not the package name. It would be really sweet if it would search both areas. :good:
Click to expand...
Click to collapse
Great idea. Consider it done.
gatesjunior said:
Great idea. Consider it done.
Click to expand...
Click to collapse
I used it and liked it, I agree with that idea and I'd also like to be able to not have to reload packages after I'm done with the filter, good all around program though.
thanitos said:
I used it and liked it, I agree with that idea and I'd also like to be able to not have to reload packages after I'm done with the filter, good all around program though.
Click to expand...
Click to collapse
You can uncheck the filter and it will display the full list again and it will keep your changes you made during filter.
Please start adding comments and questions in the main Xda thread.
http://forum.xda-developers.com/andr...bloat-t2998294
gatesjunior said:
Please start adding comments and questions in the main Xda thread.
http://forum.xda-developers.com/andr...bloat-t2998294
Click to expand...
Click to collapse
Seems the link you provided is broken (possibly just me, not sure)
JScorpio said:
Seems the link you provided is broken (possibly just me, not sure)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2998294
where have you been my whole life...
Version 3.4 with the enhanced search and the import/export options works awesome. Very nice!
Dimarini said:
Version 3.4 with the enhanced search and the import/export options works awesome. Very nice!
Click to expand...
Click to collapse
3.5 just released
Version 3.7 is out
http://forum.xda-developers.com/android/software/debloater-remove-carrier-bloat-t2998294
broken 4 lollipop 5.01
not working, error dialog attached.
I figured if SD was writable and debloater cleared out the junk I could live without root with the update. I know I can disable some of the apps from the launcher, but there are / were some under 4.4.4 that only debloater could take care of for me. Unable to do that under 5.01.
I want to start off that I was not involved in the development of Xposed. I am simply providing a step-by-step guide with photos to make it easier to follow, as some people have expressed concern over which file they need to flash and so forth.
The guide is based off of the original G4 Xposed thread here.
*Before you get started, make sure your phone is fully charged and you have at least 30 minutes where you can be without your phone, as this process takes 20-30 minutes to complete. You also need root for this to work. There is always a chance your phone may need to be restored, so insure all your data is backed up, however this should not wipe any data.*
UPDATE 10/9/15:
The instructions below have been updated to reflect the latest official version of Xposed for Lollipop 5.1.
If you've installed the earlier v71 version of Xposed and would like to upgrade, all you need to do is flash the latest xposed-v79-sdk22-arm64.zip file using FlashFire.
Step 1:
Download the Xposed Framework (xposed-v79-sdk22-arm64.zip) from here.
Download the Xposed installer (XposedInstaller_3.0_alpha4.apk) from here.
Download FlashFire* from here.
*You will need to follow the links in the first post to join the FlashFire community, wait a few minutes, then click the Play Store link to become a tester. After ~5 minutes the download link will become live for you to download FlashFire.
Step 2:
Copy the two Xposed files to your internal storage (not MicroSD card!)
Step 3:
Install FlashFire on your phone.
Step 4:
Launch FlashFire
Grant root permissions
Click on the "+" in the bottom right
Click "Flash ZIP or OTA"
Select the path to where you downloaded the Xposed framework, and click on the file.
DO NOT select Auto-Mount, leave it unchecked.
Step 5:
Click "FLASH". Note, this may take ~30 minutes. After you click flash, your phone will appear to shut off. DO NOT touch your phone during this process. Around 15 minutes later, you will see commands being run and files copying, then it will appear to be off for another 15 minutes. Afterwards it will boot back into the OS.
Step 6:
Once you are booted back into the OS, install the Xposed Installer that you previously downloaded by launching it.
Finished!
You now have Xposed!
FlashFire is an amazing tool!
I jumped on the beta when it first came out.
Thank you for doing a roll up to include all files and instructions in a single thread!
I too have this working on my VS986!
Thanks for the screenshots and concise instructions! Helped being re-assured of the steps I needed to take throughout the entire process. You cannot go wrong if you follow these steps.
Thanks again!
woozzy101 said:
Thanks for the screenshots and concise instructions! Helped being re-assured of the steps I needed to take throughout the entire process. You cannot go wrong if you follow these steps.
Thanks again!
Click to expand...
Click to collapse
Glad to help! I find screenshots and detailed instructions are easier to follow, than simple being told "Flash the zip with FlashFire".
Great write up. When i read the thread in the lg g4 general page i was concern because it took forever but eventually worked.
Sent from my VS986
That's awesome that we can get this installed with the locked bootloader. But do any modules work? What are you guys using it for so far? I only ever used xposed for the pandora patcher module. Anything else out there worth trying?
Thanks for the write up on this by the way. Details are always a good thing.
Is anyone else getting the "updating apps" dialogue after each reboot?
Thanks a million!!! Has anyone tried GravityBox yet? It says it only works on vanilla Android. Just curious if anyone has it working on their VS986's? Thanks again!
skylordusa1 said:
That's awesome that we can get this installed with the locked bootloader. But do any modules work? What are you guys using it for so far? I only ever used xposed for the pandora patcher module. Anything else out there worth trying?
Thanks for the write up on this by the way. Details are always a good thing.
Click to expand...
Click to collapse
I'm using Greenify, SNAPPREFS, xinsta, and YouTube ad away
Sent from my VS986 using Tapatalk
xbayyx said:
Is anyone else getting the "updating apps" dialogue after each reboot?
Click to expand...
Click to collapse
The first couple reboots i did. After I stopped messing with the DPI the dialog stopped appearing.
b3y0ndd34th said:
The first couple reboots i did. After I stopped messing with the DPI the dialog stopped appearing.
Click to expand...
Click to collapse
Just an FYI, I'm running at DPI 540 and I only got "updating apps" once.
geoff5093 said:
Just an FYI, I'm running at DPI 540 and I only got "updating apps" once.
Click to expand...
Click to collapse
That makes sense.
I ended up switching back to stock dpi (modified dpi messed up my lock screen quick buttons, settings crashed constantly, camera wasn't happy and sense i would have to spend all that time adjusting them back to stock, I decided to do the opposite) I found it faster to leave dpi stock and adjust per app with AppSettings to achieve a better dpi setting for the apps that were driving me nuts. Like Google +, gmail, etc.
Be careful though the email app doesn't like to go below 560 dpi.
I have followed this exactly and tried several times now, but continue to have an issue with xposed actually recognizing that the framework is installed. It says the framework is not active. Anyone else experienced this and been able to correct it?
Edit: I should mention, I have indeed rebooted several times also.
jvhawk3 said:
I have followed this exactly and tried several times now, but continue to have an issue with xposed actually recognizing that the framework is installed. It says the framework is not active. Anyone else experienced this and been able to correct it?
Edit: I should mention, I have indeed rebooted several times also.
Click to expand...
Click to collapse
Does the process fail on you anywhere? Does it take ~10 minutes both times to fully boot, or does it start back up immediately?
geoff5093 said:
Does the process fail on you anywhere? Does it take ~10 minutes both times to fully boot, or does it start back up immediately?
Click to expand...
Click to collapse
There aren't any failures anywhere that I can see, and it does take about 10 minutes both times.
Just to confirm with others, you have followed this guide without issues correct? I want to make sure there wasn't a mistake in my directions.
@jv, I would try to redownload all the files from the attachments and give it another go.
Just so you all know I did this ONE time on THREE different phones and every time I WAITED for it to finish. It WILL seem that the phone is off or dead or not doing jack **** but it is in fact booting to flashfire it just takes forever.
Thank you,
confirming - I followed the guide exactly and it worked with no issues. thanks!
one small thing - at the end of step 5, before booting back into the OS, there was another screen that did some fancy stuff
I didn't have any issues installing. I did get worried because it took longer than expected though. From flash to reboot to about 45 minutes. It was all I could do not to tank the battery out.
Greenify (donation) with xposed made the biggest difference as far as battery life. As for now, I'm 14hrs off the charger, 1hr 20 mins screen time, not on WiFi, and still at 70%.
Disclaimer: I am not responsible for anything that happens as a result of flashing these files. You decided to flash this script.
This script removes a good chunk of the apps installed by Huawei and left over files like a bunch of NFC files.
The full list is as follows:
Air Sharing
Audio Auto Test
Magnifier
Huawei Swype
Huawei Backup
Huawei File manager
Huawei Sound Recorder
Huawei Theme manager
MMI Testing
System Debug
Huawei Floating Tasks
Huawei Floating Mms
Huawei Log collection service
Huawei MMI Test 5
Huawei Weather Clock
Huawei System Manager
Huawei Power Monitor
Period Check
Exchange 2
Email
Print Spooler
AOSP Live Wallpapers
MusicFX
TTS Files
Themes
Delete-able apps
All of the leftover nfc files
All google apps that can be downloaded from the playstore
Google Talkback
If you want to keep something you will need to edit the updater-script everything is labeled well.
Download:
https://goo.gl/q3t4tB​
Reserved
Mine
Dope!!
Nice.
Excellent!!
Worked great! thanks deadman
Maybe it should be mentioned that you need TWRP to flash the zip file. Thanks for the efforts, though. I'm sort of dead in the water until I am able to get my unlock code.
kimtyson said:
Maybe it should be mentioned that you need TWRP to flash the zip file. Thanks for the efforts, though. I'm sort of dead in the water until I am able to get my unlock code.
Click to expand...
Click to collapse
The title of the thread says [Script][TWRP] please read the entire thread before posting.
deadman96385 said:
The title of the thread says [Script][TWRP] please read the entire thread before posting.
Click to expand...
Click to collapse
LOL. Good point. Sorry about that. It just wasn't very obvious. I guess I got excited and jumped in.
So, does this script removes the app that tries to police the background apps from running? I think it was protected apps under settings? If so.. awesome. we wont have to manually add them after install.
Is it possible that if I was on one of the restricted battery profiles when I ran the debloat script that it could have stuck?
When I first got the phone I put it normal mode and found it pretty good. Even running the Google launcher. However, I have now unlocked the bootloader, installed twrp, rooted, installed MOAB ad blocker and debloated the phone feels slow and janky?!? I figured dumping all the bloat would help to speed it up some. Any suggestions or thoughts?
Thanks,
Justin
TNScrambler said:
Is it possible that if I was on one of the restricted battery profiles when I ran the debloat script that it could have stuck?
When I first got the phone I put it normal mode and found it pretty good. Even running the Google launcher. However, I have now unlocked the bootloader, installed twrp, rooted, installed MOAB ad blocker and debloated the phone feels slow and janky?!? I figured dumping all the bloat would help to speed it up some. Any suggestions or thoughts?
Thanks,
Justin
Click to expand...
Click to collapse
Try removing the unnecessary zram operations using the no-swap method at -
http://forum.xda-developers.com/hon...ipt-disable-enable-swap-honor-5x-kiw-t3308321
When you debloated you removed a number of unnecessary processes and now it's trying to use the ram you freed up by keeping more of your apps in memory - with a constant compression/decompression process that adds lag on the 5X (and every other phone I've checked out that uses it).
Huawei - like every other phone maker with a new launch - will also be releasing performance improvements soon. I've tested both of these mods with the update coming next and you'll still want to use them.
The normal power mode ought to be sticking. If the no-swap mod doesn't help then it's probably a good idea to regress back with a nandroid backup, ensure normal mode and then de-bloat and remove swap.
Edit - and be sure to protect all apps in settings so that you get standard Android task management and not EMUI task management.
Is there anyway to selectively re-install some of the apps that it removed? Im curious because I think it some functionality like HwThemeManager_Local removes the ability to change the lock wallpaper. and if any other issues come up that i want to undo. (Can i somehow restore the individual items from a nandroid backup?)
And thanks for providing a nice commented script!
eruji said:
Is there anyway to selectively re-install some of the apps that it removed? Im curious because I think it some functionality like HwThemeManager_Local removes the ability to change the lock wallpaper. and if any other issues come up that i want to undo. (Can i somehow restore the individual items from a nandroid backup?)
And thanks for providing a nice commented script!
Click to expand...
Click to collapse
I don't think that you can do it directly.
Right now, it's restore your nandroid backup, modify the script here and debloat again.
I've started into an Aroma installer for this so you can just select the bloat you don't want. That's on the back burner with no ETA yet.
Meanwhile - if you want to wait until later today or tonight, I'll pull the file you want and you can reinstall it by hand.
If you don't want to wait, copy your nandroid system.ext4 to your pc (if not compressed) and rename it to system.ext4.tar - I believe that 7zip will work to extract it to your pc and you can find the file and put it back from there. (And I'm going by memory here so you'll want to be prepared for hiccups.)
There may be a utility for this - I think there is, but can't remember it.
OK - just checked another option for you -
My system nandroid spans volumes.
Copy system.ext4.win000 to system.ext4. win000.tar on to a large sd card.
Check out "ZArchiver"
https://play.google.com/store/apps/details?id=ru.zdevs.zarchiver
See if you can extract with that, and if you can, repeat for all volumes.
No promises but you'll probably find the attempts very informative.
Thanks for the info. messed around for awhile trying to get something. I found out Titanium Backup has an "extract from Nandroid backup" feature. you select the backup and it lists the apps that you can restore. The only one i found that looked like the theme manger was: com.huawei.android.thememanager i click on that and restore and it takes a long time (which makes me think TiBu is not working right) about 1-2 minutes (but it does eventually say success), reboot and still cant change the lock screen wallpaper. I also copied the system.ex4 files to windows and renamed them tar. extract them with 7zip and it kinda locks up after a bit. it extracts some extension less files. So maybe im missing some additional files, or Tibu is not really doing anything. i tried mounting system as RW just in case. No biggie, i dont think i want to spend much more time on this. Thanks for the info though. Ill take a look again later.
EarlyMon said:
Try removing the unnecessary zram operations using the no-swap method at -
http://forum.xda-developers.com/hon...ipt-disable-enable-swap-honor-5x-kiw-t3308321
When you debloated you removed a number of unnecessary processes and now it's trying to use the ram you freed up by keeping more of your apps in memory - with a constant compression/decompression process that adds lag on the 5X (and every other phone I've checked out that uses it).
Huawei - like every other phone maker with a new launch - will also be releasing performance improvements soon. I've tested both of these mods with the update coming next and you'll still want to use them.
The normal power mode ought to be sticking. If the no-swap mod doesn't help then it's probably a good idea to regress back with a nandroid backup, ensure normal mode and then de-bloat and remove swap.
Edit - and be sure to protect all apps in settings so that you get standard Android task management and not EMUI task management.
Click to expand...
Click to collapse
Ok, so I was going to try and just go back to the fully bloated stock, rooted rom.... however I messed up and somehow didn't do a backup first.... so I have nothing to restore. I tried to download and restore the "full Stock" backup from the other thread, however I'm getting errors for no partitions. I then downloaded the factory firmware from Heuawi, but when it tried to install it seemed to be working, but then booted into TWRP and won't go further. Anyone have suggestions on how I can return this thing to stock?
TNScrambler said:
Ok, so I was going to try and just go back to the fully bloated stock, rooted rom.... however I messed up and somehow didn't do a backup first.... so I have nothing to restore. I tried to download and restore the "full Stock" backup from the other thread, however I'm getting errors for no partitions. I then downloaded the factory firmware from Heuawi, but when it tried to install it seemed to be working, but then booted into TWRP and won't go further. Anyone have suggestions on how I can return this thing to stock?
Click to expand...
Click to collapse
Ok, I was able to get it all sorted out, I just had to calm down, think, and teach myself some new comand line skills hahaha
I downloaded the stock Firmware, however I wasn't able to install it since I had TWRP and it was blocking it.... so I found this tool, Huawei Update Extractor that can be found here: http://forum.xda-developers.com/showthread.php?t=2433454 Then used this Extractor to expand the firmware and extract the stock Recovery.img out of it. Then flashed that to the phone via fastboot. Now, I was able to run the stock firmware update via the factory EMUI update app. Once that was done I was able too boot the phone back up and I was suprised to find that it didn't wipe the phone, I guess it ran it as a true "upgrade" instead of a nuke and pave.... BONUS!
Anyhow, then I was able to flash the new TWRP recovery back in place and now I'm currently creating a backup.... which if I had taken the time to do in the first place none of this would have happend. Oh, well... who needs more than 3 hours of sleep..... its not like I work full time and have 5 kids under 5 :silly:
Hope this helps someone who gets flash happy and forgets to make a back up like I did!
Justin
Does it work with KIW-L21?
LordKelsier said:
Does it work with KIW-L21?
Click to expand...
Click to collapse
It might. Pre-installed apps may vary by region, the Aroma installer (under construction) is intended to be intelligent about that.
Either way, make a nandroid backup before trying to debloat and you won't be stuck if anything goes wrong.
Worked for the most part.
There were some apps left (mostlygames that came preinstalled as well as Shazam and Instagramm)