Has anyone tried QI charging through the Spigen Slim Armor case? I got an aftermarket back cover with the Qi sticker on my VZW G3 but I'm concerned that the case's non TPU back will interfere with wireless charging. According to the QI spec it should be okay but who knows.
Anyone have success setting up wireless charging through the Spigen Slim Armor case? If so, what charger did you use?
I read a post that someone said it's working but on slow charge. I'm waiting for my charger to show up then I can confirm.
Just received my charger. It does indeed charge but I did get the "Charging Slowly" message. Doesn't seem much slower than plugging it in though. Just a matter of minutes and it's already gone up two percentage points. So I feel an overnight charge will be plenty to charge a dead battery, which was my main concern.
I bought this charger...
http://www.ebay.com/itm/Qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item486b124eff
I'm wondering if brand of charger will make a difference in output or signal strength to the phone. I have it plugged into a 5-port Anker 40W USB charger hub.
Going to test to see if it charges with the screen on as well.
So even though I got the slow charging message it looks like it's charging about 10% every 20 minutes or so.
Seems good to me! That's with my Spigen Slim Armor case installed and screen off.
Tried it with the SLIM ARMOR and the original Charger WCD-100 from LG
Not working at all.
I think the case is much to thick to connect.
Try a different charger. Mine works great.
Retarded Timing said:
So even though I got the slow charging message it looks like it's charging about 10% every 20 minutes or so.
Seems good to me! That's with my Spigen Slim Armor case installed and screen off.
Click to expand...
Click to collapse
You mentioned it was a third party back plate...do you get the same message if you try to charge without the slim armor case?
Yes
i have no problems using the slim armor and itian a6 wireless charger.
The Nokia DT-910 charger should work with the SLIM ARMOR without any problems
kingoftf said:
The Nokia DT-910 charger should work with the SLIM ARMOR without any problems
Click to expand...
Click to collapse
Do you have a Nokia dt910? Mine charges fast but will randomly beep and flash the charging screen again like I moved it.
bobbarker2 said:
Has anyone tried QI charging through the Spigen Slim Armor case? I got an aftermarket back cover with the Qi sticker on my VZW G3 but I'm concerned that the case's non TPU back will interfere with wireless charging. According to the QI spec it should be okay but who knows.
Anyone have success setting up wireless charging through the Spigen Slim Armor case? If so, what charger did you use?
Click to expand...
Click to collapse
Yes. Works here with Nokia DT910. I have the random disconnect issue bit I have that without a case on also.
With my G3, an Aukey N11 Qi charger and a Spigen Slim Armor case, it's working fine !
Spigen Slim Armor case and Tylt Vue works great.
Spigen slim armor case and Koolpad works flawless! ( I did have to disable the annoying beep on the Koolpad)
fury161 said:
Spigen Slim Armor case and Tylt Vue works great.
Click to expand...
Click to collapse
the tylt is a 12V Wireless charger and is more powerful than the standard 5V
works fine
Ive got a "slim armour " case from dhgate and a itian charger aand it works fine without and slow charging problems ?
I order today itian a6. When i try i will tell here how it is. I use slimpack case.
I posted this yesterday in the VZW Accessories thread, but figured it may help some folks here as well.
Figured I'd post my Qi setup in my car for anyone else looking for a similar solution.
I'm using these products:
iOttie Qi Car Mount: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
OEM Qi compatible back cover: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Spigen Slim Armor Case: http://www.newegg.com/Product/Produc...82E16875934268
Wireless charging works perfectly in the car, and that is with the Slim Armor case on. The mount is well made and has a great design. It's a bit pricey (though currently on sale for under $40) but I'm very satisfied given the quality and functionality. I was a bit wary buying the back cover from a generic merchant in China, but it shipped relatively quickly (about 2 weeks) and works perfectly, NFC included. Hope this helps someone.
Related
Topic
Sent from my ADR6400L using XDA App
Yes, it does fit. That being said it is a very tight fit, one poster here removed the foam from the back of the Otterbox case, I did not and the case still fit.
I have also purchased the PT defender case from Bestbuy and it fits as well, again a very tight fit.
I was really worried about it charging through the cases, but it does without any issues.
Awesome! Thanks for your response!
Sent from my ADR6400L using XDA App
There any other good cases that will fit with the wireless charging door?
I have the case/holster combo from Verizon and the wireless charger and battery cover. The case I have does not work with the wireless charger back. It sucks I have to change the back cover everytime I want to charge the phone.
stearic said:
There any other good cases that will fit with the wireless charging door?
Click to expand...
Click to collapse
Doubt it. Wouldn't a case on that door affect how well it works?
Sent from my ADR6400L using Tapatalk
Flipdog said:
Yes, it does fit. That being said it is a very tight fit, one poster here removed the foam from the back of the Otterbox case, I did not and the case still fit.
I have also purchased the PT defender case from Bestbuy and it fits as well, again a very tight fit.
I was really worried about it charging through the cases, but it does without any issues.
Click to expand...
Click to collapse
The wireless charging door seems like a extended battery size? Is their a different case that bestbuy sells besides the PT Platinum? I can't find the defender you are referring too
oc3rulz said:
The wireless charging door seems like a extended battery size? Is their a different case that bestbuy sells besides the PT Platinum? I can't find the defender you are referring too
Click to expand...
Click to collapse
The charging door is bigger than the stock door, but is still smaller than the extended battery door.
Here is the SKU 2299396 for the platinum Best Buy case.
I had to do my first battery pull since using the BB case and I don't recommend using this case with the wireless battery door. Like I said it was a tight fit putting the case on, out was almost impossible taking the case off!.
The Otterbox Defender is a tight fit, but can be removed fairly easily.
The Best Buy Platinum case is much to difficult to remove to recommend it for use with the wireless charging door.
So the Otterbox's plastic and rubber doesn't affect the wireless charging at all? Any idea what the range on the wireless charger is? Also, what wireless charging system are you using?
nl3142 said:
So the Otterbox's plastic and rubber doesn't affect the wireless charging at all? Any idea what the range on the wireless charger is? Also, what wireless charging system are you using?
Click to expand...
Click to collapse
When using the Otterbox case I had no issues when charging. I didn't remove the foam, but like I said previously it was a very tight fit.
I have no idea on range of the charger, and i'm using the LG Verizon pad.
my black silicon verizon case fit fine over the wireless charging door, it created some gaps and such around the kickstand, but it worked and charged fine
Flipdog said:
When using the Otterbox case I had no issues when charging. I didn't remove the foam, but like I said previously it was a very tight fit.
I have no idea on range of the charger, and i'm using the LG Verizon pad.
Click to expand...
Click to collapse
So are the wireless battery doors and mats interchangeable or do you have to be sure you use the correct brand mat for your door? Just wondering because if the doors/backs are mat specific then I probably won't do it as you won't be able to use the LG Verizon pad with anything other than a phone.
nl3142 said:
So are the wireless battery doors and mats interchangeable or do you have to be sure you use the correct brand mat for your door? Just wondering because if the doors/backs are mat specific then I probably won't do it as you won't be able to use the LG Verizon pad with anything other than a phone.
Click to expand...
Click to collapse
Don't think it's specific to the LG Verizon charger, I just purchased it as I got the wireless battery door free (Aug. Verizon promotion)
Pretty sure that I read here (XDA Forums) that the powermat would work as well, I would search the forums before going and buying the powermat charger.
Flipdog said:
Don't think it's specific to the LG Verizon charger, I just purchased it as I got the wireless battery door free (Aug. Verizon promotion)
Pretty sure that I read here (XDA Forums) that the powermat would work as well, I would search the forums before going and buying the powermat charger.
Click to expand...
Click to collapse
Powermat won't work as it uses a different charging technology. You can use the energizer QI charging matt though, that will work.
Not sure if this is the right forum to post this but I've been trying to find out if I have a case, will Qi charger still work? I bought a Spigen Slim Armor case and would like to buy a Qi charger as well.
nickotine18 said:
Not sure if this is the right forum to post this but I've been trying to find out if I have a case, will Qi charger still work? I bought a Spigen Slim Armor case and would like to buy a Qi charger as well.
Click to expand...
Click to collapse
Should be fine. I have a case on my Nexus 4 and Nexus 7 and it works on the wireless charger just fine.
I want to mount a wireless charger inside my bedside table so I don't have to see it. I hope I can do that plus have a case on it. Here is what I'm talking about.
http://www.reddit.com/r/Android/comments/14xcx6/qi_wireless_charger_for_my_dna_built_into_my_desk/
grndc2gsr said:
I want to mount a wireless charger inside my bedside table so I don't have to see it. I hope I can do that plus have a case on it. Here is what I'm talking about.
http://www.reddit.com/r/Android/comments/14xcx6/qi_wireless_charger_for_my_dna_built_into_my_desk/
Click to expand...
Click to collapse
That's pretty cool but you would be limited to having your phone on that one spot forever.
nickotine18 said:
Not sure if this is the right forum to post this but I've been trying to find out if I have a case, will Qi charger still work? I bought a Spigen Slim Armor case and would like to buy a Qi charger as well.
Click to expand...
Click to collapse
I just tried my Nexus 5 on a LG WCP-300 wireless QI charger and it seems to work up to 10 or 12mm of paper.
Not sure what the different cases are made of but I had a Ringke slim case for the past year on my old Nexus 4 with no problems at all. (again tried it with 10mm of paper for a test and it works fine).
Distance away from the charger might affect how fast it can charge, and different chargers might perform differently, YMMV.
nevermind on my post
nickotine18 said:
Not sure if this is the right forum to post this but I've been trying to find out if I have a case, will Qi charger still work? I bought a Spigen Slim Armor case and would like to buy a Qi charger as well.
Click to expand...
Click to collapse
I just got Spigen Slim Case [Ultra Fit] and (Upgraded) RAVPower Qi-Enabled Wireless Charger and my N5 has no problems charging through the case (actually I can hold the phone almost 1/2 inch above the charging pad and it still chargers).
Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
kun_ken said:
Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
Click to expand...
Click to collapse
Add to the list:
RAVPower Qi Charger (Works Pretty good, Sometimes I have to unplug and replug the charger) <$40
RAVPOWER AMAZON LINK
MOCREO(TM) 10000mAh High Capacity Portable Power Bank Qi-Enabled Single-Position Wireless Charger Charging Pad TX-5600 (DoCooler, Choe, and Skyrocket are all the same as this one) (Works really good and it's completely wireless!!!! << About $50-$70 too!
SOLD OUT BUT LOOK UP THE OTHER ONES I NAMED
Just about any case will work with the current wireless chargers so this thread is pretty redundant to the other wireless charging threads.
However, I might as well contribute.
LG WCP-700 (Works well with the Neo Hybrid case)
http://www.amazon.com/LG-WCP-700-Portable-Office-Charging/dp/B005DMBSVA
AWESOME. I just ordered a wireless charger yesterday and I have that case, good to know
btw the gold is an awesome color
Anyone tried if:
1. The official nexus Charger works with the neo hybrid
2. Are the magnets strong enough to be used as a car mount with the case?
Unfortunately the Spigen Neo Hybrid doesn't works with the Nokia DT910, it makes the Nexus 5 being a little more up on the stand, and the recoil for the wireless isn't aligned anymore and don't want to charge ... Now I have a case to sell if anyone is interested (Neo Hybrid Champagne Gold)...
Spigen Neo Hybrid works with official wireless charger, and magnetic capability work too !
Glutt0ny said:
Unfortunately the Spigen Neo Hybrid doesn't works with the Nokia DT910, it makes the Nexus 5 being a little more up on the stand, and the recoil for the wireless isn't aligned anymore and don't want to charge ... Now I have a case to sell if anyone is interested (Neo Hybrid Champagne Gold)...
Click to expand...
Click to collapse
I have the Neo Hybrid and the DT910 - works fine. Occasionally it won't start charging if I set it on the stand mis-aligned, but if I'm a little careful it works...use it for every overnight charge as a night clock, too. My DT-900 plate on my desk also works perfectly with the Neo Hybrid case.
xlys said:
Spigen Neo Hybrid works with official wireless charger, and magnetic capability work too !
Click to expand...
Click to collapse
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
I have the Nillkin Magic Disc, works perfect with Neo Hybrid Gold.
P90Puma said:
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
Click to expand...
Click to collapse
I wouldn't rely on the magnets for this in the car if I was using a case. I wouldn't have any problem relying on the magnets when the phone is not in a case (I don't use one myself) as the official nexus magnets are very stable, provided you practice with it to get really used to getting it in the sweet spot...it's kinda funny, for me it feels almost like it notches into place if I give it just the right amount of force on the phone) but through the thickness of the case, I'm sure it would be very prone to falling off.
Not to mention when you hit a bump in the road. Come to think of it, maybe even without a case it would be capable of popping off. Don't know, I don't drive.
( I do use the official charger at home, mounted in the similar way as what you would have in a car though, it's attached to the side of my dresser which is next to my bed so I can just turn over and look at it if needed, and so it works well with voice commands if I'm taking a nap or whatever. )
I've been using the Nokia DT-900 and the Spigen Neo Hybrid Case with no problems
P90Puma said:
Can you see if the magnets are powerful enough to hold the phone like it would be mounted in a car?
Click to expand...
Click to collapse
They don't with the case
kun_ken said:
Case : Spigen Neo Hybrid Gold
Charger : Panasonic QE-TM101 (work perfect)
Sanwa Enerlink WLC-STN11BK (work perfect)
Click to expand...
Click to collapse
Can you explain, please: did you use official Samsung wireless back cover & Spigen cover + wireless charger?
Or some Qi receiver and standart back cover?
I just bought samsung wireless back and it's work fine, but I afraid that spigen cover didn't fit.
If you use standart back cover and Qi receiver, did it fit well in spigen case in result?
Thank you!
imort said:
Can you explain, please: did you use official Samsung wireless back cover & Spigen cover + wireless charger?
Or some Qi receiver and standart back cover?
I just bought samsung wireless back and it's work fine, but I afraid that spigen cover didn't fit.
If you use standart back cover and Qi receiver, did it fit well in spigen case in result?
Thank you!
Click to expand...
Click to collapse
This is the Nexus 5 forum, nobody should be using a Samsung back cover on this phone...
snives said:
This is the Nexus 5 forum, nobody should be using a Samsung back cover on this phone...
Click to expand...
Click to collapse
Omg, sorry, find this thread by search and didn't see in which forum it belongs.
I recently bought the CHOE Qi Wireless Charger Pad, it works very well without a case.
So, I am wondering about what cases people are using that are absolutely compatible with this particular charger.
Yes, I did check the compatibility thread but there is only one case listed for the choe pad and it says that it is conditionally working but I am looking for a more affirmative answer.
Thanks in advance.
hyperized said:
I recently bought the CHOE Qi Wireless Charger Pad, it works very well without a case.
So, I am wondering about what cases people are using that are absolutely compatible with this particular charger.
Yes, I did check the compatibility thread but there is only one case listed for the choe pad and it says that it is conditionally working but I am looking for a more affirmative answer.
Thanks in advance.
Click to expand...
Click to collapse
They all work with Cruzerlite cases from my experience with the Choe Qi Wireless 10,000mah Powerbank. My Choe also works for the Nexus 5 with the Ultra Hybrid from Spigen & the Ringke Fusion Hybrid. It all boils down to the material & thickness. It can also vary due to varying tolerances of the case & even the Qi chargers. The charging field strength varies slightly from device to device due slight inconsistencies in tolerances that are inherent to mass manufacturing.
Is it possible to put a case on the Pixel 3 XL and still use wireless charging? Will only certain cases work? None?
Thanks.
Probably depends on the case. Even on the Google website it shows one charging on the stand with a case (fabric on). Looking at Spigen's site some of them say clearly they support wireless charging while it's omitted for others...
whoster69 said:
Is it possible to put a case on the Pixel 3 XL and still use wireless charging? Will only certain cases work? None?
Thanks.
Click to expand...
Click to collapse
Depends on the case. The ones that can will say so. For example some of the Spigens can and it says so. Others say nothing about it and they can't.
Yes you definitely can as long as there isn't anything blocking the connection through the case like a magnet. Even externally using a pop sockets you can't wireless charger. So the answer is yes it'll work through mostly anything and any case unless there is an object in between
During the Google presentation they said you can charge even with a case
Good to know. Thanks for the replies.
I have never had an issue wirelessly charging with a case on. With any phone and even using an external wireless charger adapter
Charging and charging well are two different things. As an example my Note 8 took forever to charge with the leather case on and had to be set on the charger just exactly right to charge at all. Case off and you could just toss it on the pad and it worked. Thick leather has been the worst in my experience, TPU seems to have little effect if any over charging sans case. In the latter case those were all lightweight close fitting cases, might be different with the thicker full protection style cases like a defender. Haven't tried any other materials with wireless charging.
I went with the "all around" protection and go the Otterbox Defender case... it unfortunately doesn't work well with the Pixel Stand.. even with the rubber outter shell off it doesn't charge consistantly. It will charge, then stop... I'm getting a Spigen Neo Hybrid which..is supposed to work with Wireless charging.
presence06 said:
I went with the "all around" protection and go the Otterbox Defender case... it unfortunately doesn't work well with the Pixel Stand.. even with the rubber outter shell off it doesn't charge consistantly. It will charge, then stop... I'm getting a Spigen Neo Hybrid which..is supposed to work with Wireless charging.
Click to expand...
Click to collapse
Most chargers require the case to be <=4mm to charge wirelessly.
I tried the Pixel Stand with my P3XL while the case was on (Otterbox Defender) and have not noticed any issues. Yet...
Sent from my Pixel 3 XL using Tapatalk
works great with spigen rugged armor..