Develop Bugs

[MEGA]Titanium S1,Cherry Flame2.0,KTouch U86 Kiss,Archos 45 Platinum

Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse

Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN​
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse

Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse

Reserved
Reserved

Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.

sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me

Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated

LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1

TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks

English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it

Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards

at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while

Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!

pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks

CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard

Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it

LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download

Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!

Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account

LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?

ROOT + CWM + ROM (cleaned stock ~ custom) for HCL Me Connect 2.0 Tab V2

ROOT + CWM + ROM (cleaned stock ~ custom) for HCL Me Connect 2.0 Tab V2
WARNING , THESE PROCEDURES WILL MAKE YOUR DEVICE OUT OF WARRANTY AND MAY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK.
Make sure USB Drivers are installed on your PC.
------------------------------------------------------------
X. Rooting Steps:
1. Turn on USB Debugging on Tab
2. Download Vroot on your PC ( Google it or www.mgyun.com/en/getvroot )
3. Run Vroot & Connect your Tab to PC. Vroot will auto detect the device and root it..
------------------------------------------------------------------
XX. Installing CWM
1. Download and install two apps like File Manager with root access and SManager ( Script Manager) for console.
2. Grant root access to both apps.
3. Download recovery and flash from link:
http://www.mediafire.com/download/vf5xy1hb7kb12ha/HCL_Tab_CWM.rar
4. Extact the file (flash_image and recovery.img) on your internal sd card and after extarction, copy both files to root folder named "/dev" using File Explorer(with root access).
5.Enter root shell by running SManager Console.
6. Type the following commands:
Command 1:
chmod 755 /dev/flash_image
Command 2:
/dev/flash_image recovery /dev/recovery.img
( type the command exactly, care for no uppercases, better copy and paste)
6. After entering the command, u will get " recovery successfully updated"
7. Now u have recovery installed, u may boot into recovery by shutting down ur tab and pressing power and volume dowm button together for around 7 secs until logo shows up.
Congrats now u have rooted tab and a custom recovery CWM.
--------------------------------------------------------------------
XXX. ROM ( will update later)
I have not prepared custom rom but instead i have cleaned rom of my tab with all bloatwares and nice UI and launcher ( Screenshot attached) .
You may download the file ( ~ 220 MB ) and restore with CWM recovry by following below steps:
DOWNLOAD LINKS (FILE UPLOADED IN PARTS, DOWNLOAD ALL 3 PARTS BEFORE UNZIPPING):
http://www.mediafire.com/download/8prnbeuybkptnca/clockworkmod.zip
http://www.mediafire.com/download/cq9t74v0pdk4l4k/clockworkmod.z01
http://www.mediafire.com/download/7ukn7psr2byb2cw/clockworkmod.z02
1. First make backup of current rom through CWM.
2. Backup rom on ur pc by switching on the device.
3. Extract the contents of downloaded files into internal sd.
4. Goto CWM Recovery, then format system, format data, format cache and wipe format dalvik cache.
5. Now choose restore option to restore the downloaded clean rom..
WARNING , THESE PROCEDURES WILL MAKE YOUR DEVICE OUT OF WARRANTY AND MAY BRICK YOUR DEVICE. DO IT AT YOUR OWN RISK.

Thanks man i 've successfully installed clock work mod recovery 6.I am waiting for the ROM
Sent from my Connect-2G-2.0 using xda app-developers app

BackupTA
You forgot to mention BackupTA application before doing all of this..
It helps u revert ur phone to the original stock state as if there was never any tweaking..
Great way for not making the warranty void..
Cheers..
---------- Post added at 01:57 AM ---------- Previous post was at 01:52 AM ----------
Oh!!
Here's the link..
http://forum.xda-developers.com/xpe.../tutorial-backup-ta-partition-to-drm-t2234627

rom
waiting for the rom man

connect 2g 2.0
Thank You So much for this wonderful tutorial ,Now i've got CWM working on my HCL me connect 2g 2.0,All the other tutorials on other sites were not working

good work bro but waiting for the rom
Bro i have rooted and installed CWM Recovery by using your tutorial but Unfortunately i have deleted my rom and i have downloaded the stouk rom from the hcl (official website) but it is also in .img , so i can't even flash it throw the CWM Recovery, and if i switch on my tablet, it stuck on boot logo,
So, please bro made the custom rom fast as possible :crying:
and bro good luck for your future
Thanks

rom link added
rom link added, you may recover your device...
gautam908 said:
Bro i have rooted and installed CWM Recovery by using your tutorial but Unfortunately i have deleted my rom and i have downloaded the stouk rom from the hcl (official website) but it is also in .img , so i can't even flash it throw the CWM Recovery, and if i switch on my tablet, it stuck on boot logo,
So, please bro made the custom rom fast as possible :crying:
and bro good luck for your future
Thanks
Click to expand...
Click to collapse

I need help while extracting the file :/
The one file is in .zip and another two files is in .z01 and .z02 file and cannot be extract, Bro help me please
If you can give the screen shot please it would help me a lot
Thanks

MD5 mismatch
Bro I have extracted the backup file of the ROM and while restoring it I was getting an error of MD5 mismatch???? Any solution???

Waiting for rom
I hav install cwm recovery.can you post the link of cyanogen mod custom rom

hello everyone, please help me to port cm 12 for my tablet: HCL me connect 2.0. above stock rom files are missing.. techincal speciation are: 1 GHz cortex A9 CPU , 1GB DDR3 RAM currently running on android 4.1 jelly bean os.
please guide and help me to update my tablet andriod version..

[DIY ROM] B5x Based Rom Add what you want

I take no responsibility for any damge caused.
You will make customize this rom yourself by following these isntructions:
Step 1
Firstly Download the necessary files:
B132*= http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/
B510*= https://drive.google.com/?usp=chrome_app#folders/0ByjEFdm-4A3EQlZuejlla2xaUTQ
Stock Recovery*= http://www.androidfilehost.com/?fid=23252070760973625
TWRP Recovery^= http://www.androidfilehost.com/?fid=23329332407572611
Adb Drivers*= http://adbdriver.com/upload/AdbDriverInstaller.exe
Pure Graphic HD Mod^= http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering+Version).zip
Pure Performances Stock^= http://www.mediafire.com/download/q0a4crr8aq4gm24/PurePerformances™X_Stock.1.4.zip
Pure Audio^= http://d-h.st/32h
Bravia Engine^= http://www.dropbox.com/s/l1m3q18g64yb0av/Sonyengines4.0+.zip
Minimal ADB and Fastboot ^= https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
^ is optional and * is a must
Step 2 Method A
Now the steps will be different depending on what rom you currently have installed if you have a custom or beta firmware/rom installed and twrp you will need to:
Firstly Flash Your Recovery to Stock = http://forum.xda-developers.com/showthread.php?t=2636231
Flash B132= Extract the B132 file and copy it's dload folder onto your internal memory>then reboot your phone into recovery by>holding pwr+vol up+ vol down continuously untill it starts recovery>after it finishes setup your phone then follow the next step
Flash B510 =(do not flash with recovery) do so by taking the zip file as is(do not extract) and copying it onto your P6's internal memory under the dload folder(if it's not there create it) then on your P6's goto settings>about phone>system update>local>update then let it update.When it's done you have successfully installed Kitkat, if you want go on to (optional further steps)
Flash TWRP = http://forum.xda-developers.com/showthread.php?t=2636231 then
Install the mods =Reboot to Recovery>hold pwr+vol up+ vol down continuously untill it starts> Start with Pure graphics>Pure Performance>Pure audio>Bravia>then clear cache> Reboot > And You are done you have a optimized B510 rom
Or if you are already on a stock rom like B111 or so then you can just:
skip the 1 instruction on the list and just do the rest.
[Note]
You can replace B510 with B512,B513 if you wanted to.
B512 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B512.zip
B513 = http://dl-uk.huaweinews.com/index.php?dir=Roms/Ascend-P6/&file=B513.zip
Method B
1. Start with Paranoid Android, OMNI or any other AOSP-based ROM.
2. Back up all data with Titanium backup and copy everything you need from your internal storage. ATTENTION: The internal storage will be wiped while flashing, so the backup MUST be on your SD-Card.
3. Copy dload folder to SD-Card or internal storage. (there should be no difference)
4. Boot to TWRP and make a backup in-case something goes wrong.
5. In TWRP wipe everything except internal and external storage.
6. In TWRP choose reboot to bootloader. Confirm that no OS is installed and don't install SuperSU.
7. Plug your phone in your PC and open a CMD.
8. Download B510 recovery.img and boot.img from this thread http://forum.xda-developers.com/show...php?p=51718316.
9. Follow the instructions by @surdu_petru(method1)
(or use this(method 2)choose install recovery image first, then the boot image
or use Method 3>
copy both the recovery and boot img files to your adb folder then>
run these commands:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot recovery
. IMPORTANT: When the flashing is finished and the phone reboots unplug the USB cable then wait for recovery to open and let it install.
10. You are finished!! The first boot takes some time no need to panic.
Additional:
Reinstall TWRP and flash SuperSU for Root. Than you can restore your backup you made in the second step.
[credit for discovering it's possible to install B510 directly from Aosp based roms goes to @taaeem= original post]
Rooting:
Try these:
XDA Root List = http://forum.xda-developers.com/showthread.php?t=2390491
Motochopper = http://www.hexamob.com/downloads/motochopper.zip
Doomlord's Exploit = http://forum.xda-developers.com/showthread.php?t=1321582
Bin4ry Method= http://www.schwantz-i.org/universal/Root_with_Restore_by_Bin4ry_v18.rar
SuperSu Flashing method = http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip?retrieve_file=1
Essential Apps
Titanium Backup
Wifi Analyzer
Chrome
Gmail
BBM
Whatsapp
Facebook
Messenger
Calculator++
Cpu-Z
AnTuTu Benchmark
Speedtest
Lucky Patcher
ES File Explorer
AndroZip
Root Browser
Adobe Reader
Vlc
Battery Doctor
Clean Master
Unit Converter
Software Data Cable
My Phone Explorer
Fing
Ad Away
For users struggling with bootloader and recovery issues try using this to switch to stock recovery http://www.androidfilehost.com/?fid=23501681358539086
Also for help with common problems goto http://forum.xda-developers.com/ascend-p6/help/p6-u06-common-issues-fixes-t2843810
credits for creating the mods,twrp,apps,root methods goto their respective developers.

Maybe i got you wrong, but is it possible that i share the ROM with others? Or do you mean that the DIY ROM is only for ourself?
PS: The link for Pure Graphic HD Mod does not work, theres is a typo. The right URL is
"http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_%28Rendering+Version%29.zip"

Tried the pure audio and the pure performance mods... Audio is better...but performance not so good! Anyway...good job!! ?

Can I flash that superuser 2.02 because mine when I click its unfortunately stop im on b513 repack by surdu
Sent from my HUAWEI P6-U06 using xda premium

You can give it a try.

[GUIDE]Root Xolo HIVE 8x-1000 and other MTKxxxx impossible to root devices easily!

Hello all XDA Members and others who are viewing this thread.
I finally found a way to root the IMPOSSIBLE TO ROOT MediaTek devices!
I personally used it on Xolo HIVE 8x-1000 MT6592M with 2 Gb RAM 1.4 Ghz Octa Core Processor MT6592M.
Devices that won't be rootable by apps like Kingo Root, Vroot(for a certain time), Framaroot, towelroot etc can be rooted and have CWM recovery installed.
Xolo HIVE 8x-1000 users can also follow this guide created by The Android Soul for picture tutorial. : Click Here
Note : If you're rooted but want to install CWM then follow this guide to create CWM and flash it via SP Flash Tool or Just copy the created recovery and flash it via Rashr (Download from play store)
Let's get started without wasting time.
Things you'll need MTK Drivers : All MTK Drivers 2014
Your Phone with USB Debugging Mode turned on in Developer Section
Usb Cable and most Important
A Calm head :silly:
A video is already available link is in 1st point.
Code:
[B][SIZE="3"]Warning Rooting Voids warranty. I would in any means not be responsible for dead devices, bricked SD cards or any other activity that leads to damage of your device. If you know the risks still want to continue then go ahead.[/SIZE][/B]
First we would like to load scatter file for our device. Process in the video link in 1st point.
Disconnect the phone's battery (if any) [ IN CASE OF XOLO HIVE JUST SWITCH OFF THE DEVICE THEN WAIT FOR 30 seconds and connect the device ] and then press volume up button and connect it with PC it will connect device in preloader mode.
1) We would like to have a backup of our UNROOTED stock ROM. Download MTK Droid Tools (Google it) and then use this method to backup your UNROOTED stock ROM. It is basically Read Back method from SP Flash tool Follow this video tutorial : How to backup unrooted stock ROM
Warning : Please do not continue this tutorial if your device has fake information or any kind of restriction or ubifs file system or you'll brick the device. You have been warned.
This is a text guide for the video :
2) After backup extract the firmware you created using MTK Droid Tools. Process given in video.
3)Now when you get boot.img for your device you're good to go
4) Open MTK Droid tools with administrative privileges and make sure your phone is connected and then migrate to root,backup,recovery tab and click the option to choose boot.img from and locate your stock boot image and make a CWM recovery from it.
5) Wait for process to complete and then check recovery folder inside MTK Droid tools folder. There you'll find two files
Code:
[COLOR="Red"][B]XXXX_bootpatched.img & XXXX_recovery.img[/B][/COLOR]
6) Now open SP flash tool and load the MTKXXXX_Android_scatter_txt and untick every option except for boot.img and recovery.img. Then click on both tabs and locate the modified images created by MTK Droid tools which can be found in recovery folder itself if you haven't moved them.
7) Make sure your phone isn't connected at this time and then hit download button in SP Flash Tool and then with phone's battery removed with volume up button pressed connect it to PC and then flash process will begin. After completion you'll see a green circle at that point disconnect your phone and switch it on. Don't disturb the phone until flashing completes and you see a green circle.
Congratulations! You have CWM Recovery for your device without ROOT!
ROOTING
1) Now download this zip file and flash it via CWM Recovery. SuperSU.zip and reboot.
Congo many will get root access now but not Xolo HIVE You do need to flash this zip. Users that don't get root after flashing supersu zip can also continue further.
2) Download Vroot from here and install it.
3) Connect your phone with USB Debugging on and wait till it detects your device.
4) Now click root button and voila you're rooted!
Now reboot and you'll see the superuser app Now you'll have two Superuser apps (NOT XOLO HIVE USERS) SuperSU from flash and Superuser from Vroot. Not to worry just open SuperSU and it will automatically ask to remove the other Superuser app choose that and reboot and you're done
Luckily those who don't want or find complication in SP Tool Read back method, just download the stock ROM for your device and extract boot.img from it and then follow same steps from 4th step at the beginning from where to create CWM for your device.
I suggest use androidxda.com for most stock ROM's.
Xolo HIVE 8x-1000 users don't Panic I have your CWM and Boot image ready Just download from here : Xolo HIVE Recovery.img
Xolo HIVE Boot Patched.img.
KINDLY DON'T MIRROR MY FILES. IF YOU WANT TO SHARE GIVE THIS LINK TO PEOPLE.
Xolo HIVE users I saved your work upto step 5 from step 6 ,i.e, flashing you need to do manually
I know it's a long and complicated process but it is only method working until a new exploit is available to root the impossible mtk devices.
Conisder me a donation if you can as it will help me to make more guides and apps
If you cant donate hit thanks :good:
That won't cost you!
EDIT : I am adding Xolo MT6592 scatter file too in case you can't generate it. Remember to load scatter file uncheck all options leaving boot.img and recovery.img then flash the boot and recovery I provided ONLY XOLO HIVE USERS

Tech N You said:
Hello all XDA Members and others who are viewing this thread.
I finally found a way to root the IMPOSSIBLE TO ROOT MediaTek devices!
I personally used it on Xolo HIVE 8x-1000 MT6592M with 2 Gb RAM 1.4 Ghz Octa Core Processor MT6592M.
Devices that won't be rootable by apps like Kingo Root, Vroot(for a certain time), Framaroot, towelroot etc can be rooted and have CWM .
Click to expand...
Click to collapse
bro i want to ask you about the scatter file, because you have not provided that and it is most useful. i have a xolo hive 8x 1000 and when i am trying to generate scatter file then this error comes. and i have read that this can brick the phone. And the person in the video you suggested in step 1 also said in his video not to proceed if any error comes. so please help.

Scatter file can be easily made :?
You just have to click block path tab it won't brick :/
Also I have provided Xolo HIVE recovery and bootpatched file! Just download this and flash it via SP Flash Tool! You can create scatter yourself! Watch the video!
Connect your phone with USB Debugging on and connect to PC and let mtk droid tools read it.When it does then you click on blocks map tab!
Sent from my 8x-1000 using XDA Free mobile app

Added the scatter file there you go check the post

Tech N You said:
Added the scatter file there you go check the post
Click to expand...
Click to collapse
Alright bro thanku so much..
And if u have rooted your xolo 8x 1000 then please provide a video link or tutorial. Thnxx

What above I wrote is tutorial only
Switch off the phone open sp flash tools load scatter file and uncheck all boxes excluding boot.img and recovery.img make sure you downloaded the recovery.img and boot.img I attached in the post, just locate my given recovery.img and boot.img and click download button on sp flastool then connect your phone while u keep the volume up button pressed. Now the process will begin and it will give a green circle on successful completion. Switch on the device install vroot on PC I gave link in thread then just connect your phone with USB debugging on and then wait for Vroot to detect the phone then click root and you're done.
Sent from my 8x-1000 using XDA Free mobile app

Tech N You said:
What above I wrote is tutorial only
Switch off the phone open sp flash tools load scatter file and uncheck all boxes excluding boot.img and recovery.img make sure you downloaded the recovery.img and boot.img I attached in the post, just locate my given recovery.img and boot.img and click download button on sp flastool then connect your phone while u keep the volume up button pressed. Now the process will begin and it will give a green circle on successful completion. Switch on the device install vroot on PC I gave link in thread then just connect your phone with USB debugging on and then wait for Vroot to detect the phone then click root and you're done.
Sent from my 8x-1000 using XDA Free mobile app
Click to expand...
Click to collapse
y so rude? and please tell me about this. sp flash tool is not detecting my phone i exactly followed what u have said above but no success. tried installing pdanet 3 times with my phone connected even installed drivers manually with signature enforcing off.

Install all mtk drivers from the link I gave in the thread and before installing them make sure to delete the previous drivers
Sent from my 8x-1000 using XDA Free mobile app

Tech N You said:
Install all mtk drivers from the link I gave in the thread and before installing them make sure to delete the previous drivers
Sent from my 8x-1000 using XDA Free mobile app
Click to expand...
Click to collapse
ok i did it thanxx bro.

Anytime
Sent from my 8x-1000 using XDA Free mobile app

See the method to root kitkat 4.4.2 for C2C, link in my signature, flashing that zip will root any device with kitkat/Jellybean, no need to use vroot

umangleekha said:
See the method to root kitkat 4.4.2 for C2C, link in my signature, flashing that zip will root any device with kitkat/Jellybean, no need to use vroot
Click to expand...
Click to collapse
Flashing cwm recovery via sp flashtool doesn't makes you rooted. It just replaces stock recovery

Tech N You said:
Flashing cwm recovery via sp flashtool doesn't makes you rooted. It just replaces stock recovery
Click to expand...
Click to collapse
Read carefully, after flashing cwm, i said to flash that root zip, and after flashing that root zip, no need to use vroot or other methods

umangleekha said:
Read carefully, after flashing cwm, i said to flash that root zip, and after flashing that root zip, no need to use vroot or other methods
Click to expand...
Click to collapse
Well nothing worked for Xolo Hive if you read my guide too. Flashing SuperSU.zip ends up in a infinite binary update with failure

can you please root xolo 8x-1100
i also don't have pc

I certainly have helped rooting Xolo 8x-1100 and 8x-1200 to a member.
You need PC for flashing boot.img and recovery.img, Sorry my friend: (
Or try rooting via towelroot first then tell me if you succeed.
Also download your stock ROM from here and send me the recovery.img from it follow this link and download : Xolo Play 8x-1100 stock rom
Sent from my 8x-1000 using XDA Free mobile app

badshah.mb said:
can you please root xolo 8x-1100
i also don't have pc
Click to expand...
Click to collapse
Check my above post

xolo 8x 1000
successfully rooted the xolo 8x 1000 with iroot....thanks man

Problem with the root
unable to flash custom recovery even after following every step to the dot. What might the problem be?
my phone isnt rooted im trying to root my phone.
BUT CANNOT
kindly find a solution.

Stuck at bootloop.
Guys,I'm stuck at the boot logo.
Nothing is working.Neither CWM recovery nor ADB. Please help me and give a CWM recovery zip file.

[Tutorial] How to root and install custom ROM and recovery.

Hello guys , this is my first topic and I want to tell you how to customize your phone.
First : Rooting
You have to root before doing any thing , you can root your phone by a lot of ways
1- Rooting by PC , you can find alot of rooting programs that is very easy to use like : Kingo root, wondershare mobile Go , king root and a lot more , but the best tool is Kingo root for PC , you can download it from the official website
After downloading you have to install it and your phone usb drivers and enable USB debugging in developers options , then connect your phone to PC via USB cable
The click Root! , wait until the rooting is completed and you have a root!!
2- rooting without PC ,there are a lot of tools like King root, Kingo root , towelroot and framaroot and more , I prefer king root because it is supporting a huge list of devices , you can download it from the official site after downloading you have to check unknown sources from Applications settings before installing , once you did you can install it after installing open it and wait to check if there is a strategy for rooting your phone , if it is found one click on root and wait for it to complete rooting ,
3- installing SuperSU , SuperSU is the best root permissions management app , it is supporting a lot of languages and it is more safety then king root or Kongo root apps ,
You can download it from Play store or install it easily by a custom recovery ,
First download it from play store and open it and give it a root permission , then the app will install its binary and important files , if it is saying fails to install you can go to king root app and go to options then root options the clean root , it will uninstall its self then retry to update SuperSU binaries it should be installed now
Second : installing custom recovery,
If you have Samsung device then this will be very easy to you.
1 - by odin ROOT is not important , you have to download these files : Odin3.xx , Samsung drivers and your recovery file ,
[WARNING! ] you can't install other device recovery file even if it is the same in shape or model with few changes or this will brick you phone ,
How to install : shut down your device and put it into downloading mode by pressing power + volume down and home buttons in the same time , a warning press volume up button and connect your device via USB cable and open Odin by administrator , there will be a blue bar on options tabs , press on PDA or AP button and select your recovery file , the press start DONT disconnect the USB or your device will be damaged , a progress bar will appear on your phone screen , wait for few seconds and a PASS!! message in a green bar will appears in Odin , then you can disconnect you phone from USB , you can go into recovery by pressing power + volume up and home button s in the same time , you will find your self in recovery mode , there is different types of custom recoverys like clockworkmod (CWM) and Team Win Recovery Project (TWRP) and Philz recovery and more , you can find your recovery file in some in xda forums , remember to you your correct recovery file and flashing it correctly ,
2 - With out PC (Root is required!) : download your correct recovery file in your phone and download any comprising app like AndroZip or zArchive , I prefer zArchive and flashing app like Flahfy or Mobile uncle tool or Rasht , after downloading the apps and your recovery file and flashing and archiving apps , go into zArchive or any other app and rename your recovery file which it is name with .tar.md5 at the last of its name with recovery.tar and click on file after renaming it and extract it , then go to flashing app like Rasht and click on recovery from SD card and select your recovery file and flash it , remember to give it root permission , now you have a custom recovery, you can flash a custom recovery by this method for any device
Like LG or HTC or any other device.
Third : installing custom ROMs :
Installing Custom ROMs is the coolest feature of custom recoveries , the rom is the operating system of your phone or tablet , you can find better ROM for your device and faster like CyanogenMod or AOSP or other custom ROMs which it is better than original ROM , you can go to CyanogenMod or AOSP website and search for your device , and download your phone or tablet custom ROM which its format is .zip ,
After downloading your ROM file shutdown your device and go into recovery mode by pressing power + volume up and home buttons , select install zip from SD card if the file is in your external SD card or install zip from internal SD card if it in internal storage , select your ROM file and flash it after flash is completed wipe cache and data the reboot your phone , you are in you new ROM now !!
you can get root permissions by flashing chain fire flash able zip file , you can download it from chainfire website .
Thank me if you liked this tutorial

Thanks
thanks it was useful for me to discover that CyanogenMod and AOSP are useful to search for. Im trying to seek out if there exists a C-rom for my old Asus tablet.