Related
So I rooted my SGS3 for the First time today. Got root access. Got my favorite root apps (still on the stock rom btw) and decided to flash a custom rom. I tried to flash the Wicked ROM and used a Superwipe before it. After that I rebooted the phone and the rom never booted. Went back into CWM and when I tried to install another rom or backup, nothing was there. Says file not found or something. Doesn't even show the sd card files I have. Confused. Any help?
bump*
What I've come to understand is that the files need to be on internal storage but I can not access the internal storage anymore. I can access download mode but not internal or external storage via usb cable. Any help? Thanks
triumphantpower said:
What I've come to understand is that the files need to be on internal storage but I can not access the internal storage anymore. I can access download mode but not internal or external storage via usb cable. Any help? Thanks
Click to expand...
Click to collapse
Try restoring back to stock with odin.
Edit: To use odin all you need is access to download mode which you have...
what do I need to restore to stock? I do not have a stock rom. And it only accepts tar files
It is impossible to brick this phone.
Sent from my SGH-T999
lazarat said:
It is impossible to brick this phone.
Sent from my SGH-T999
Click to expand...
Click to collapse
It possible. Just flash an international rom . I get what your saying tho. Odin ftw
Sent from my SGH-T999
so how can a file be pushed into the internal memory. Because cwm is not readding any files off the sd card. And they are there. Not sure how to flash a rom from odin, if that is even possible. Because it only accepts .tar files. and I believe md5's
I suggest seeing this post. http://forum.xda-developers.com/showpost.php?p=31890391&postcount=2
It is located as post 2 of the top OP in the Q&A thread.
Good luck
thanks. I got the phone back to stock recovery and a stock rom. Just can't get it recognized by my laptop. Not sure if it's a driver issue or what. But can not find the internal or external drives in "My Computer".
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Can you get into Download / recovery mode w/o the SD card ?
Did you try the stock image from this thread ? :
http://forum.xda-developers.com/showthread.php?t=2363882
dwolder said:
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Click to expand...
Click to collapse
the.teejster said:
Can you get into Download / recovery mode w/o the SD card ?
Click to expand...
Click to collapse
Unfortunately, no. Hard Bricked without the SD card
the.teejster said:
Did you try the stock image from this thread ? :
http://forum.xda-developers.com/showthread.php?t=2363882
Click to expand...
Click to collapse
I hadn't tried this one. I used the one from SAMMOBILE. I'll try this one right now.
Thanks!
dwolder said:
Unfortunately, no. Hard Bricked without the SD card
I hadn't tried this one. I used the one from SAMMOBILE. I'll try this one right now.
Thanks!
Click to expand...
Click to collapse
If you want to maintain ROOT access be sure to grab the root.zip and flash AFTER you flash the image and BEFORE you reboot.
As an FYI, the 16Gig Bell image worked great for me.
the.teejster said:
If you want to maintain ROOT access be sure to grab the root.zip and flash AFTER you flash the image and BEFORE you reboot.
As an FYI, the 16Gig Bell image worked great for me.
Click to expand...
Click to collapse
Tried everything.. flashing the recommended version above from internal disk won't work. Flashes of Odin compatible versions complete, and still need the SD card in. I have rooted, installed Clockwork recovery, tried to install the firmware from internal drive... it would fail. Install from ODIN (Samsung Recovery) it succeeds, but won't boot without the SD Card in. (Familar QD Loader). I just don't get it. I might have to go to ADB level, and see if I can have any success there?
dwolder said:
Tried everything.. flashing the recommended version above from internal disk won't work. Flashes of Odin compatible versions complete, and still need the SD card in. I have rooted, installed Clockwork recovery, tried to install the firmware from internal drive... it would fail. Install from ODIN (Samsung Recovery) it succeeds, but won't boot without the SD Card in. (Familar QD Loader). I just don't get it. I might have to go to ADB level, and see if I can have any success there?
Click to expand...
Click to collapse
You my friend as you said are HardBricked, need to be flashed by jtag. I tried on a friends to use a debrick image to fix, but in the end I have to use the riff box to fix it. You may also have luck with this http://forum.xda-developers.com/showthread.php?t=2439367 but remember to replace the file/files with the proper ones for YOUR phone.
Good Luck
dwolder said:
Background:
I thought I would try to install stock 4.3 leak for i747, forgetting that I had i747M! I totally HARD bricked my phone.. not a whimper, except the familiar recognition of a new device type on windows.. but no charging, booting, or even response.
I turned to the 'Unbrick via SD Card' thread from the Sprint S3 forum:
http://forum.xda-developers.com/showthread.php?p=43305728
I managed to find a debrick.img for the i747M. With that in hand, first using the method utilizing Cygwin, I was able to boot into Download Mode. Hurray! I downloaded the Stock 4.1.2 i747M Bell Image, and fully restored the phone using ODIN.
All seemed great until I removed the debrick SD card, and rebooted. Dead again. With the SD card in, I can reboot. I have tried restoring multiple times, writing a new PIT from another i747M, reinstalling the bootloader... nothing. If the SD Card isn'tin the phone, it's bricked. I am happy my phone is up and running, but it's nasty not having my 16 Gig SD card available, and also, I really need to ensure the battery doesn't die! Can anyone suggest what might be going wrong? Shouldn't I simply need to flash the stock image, and be good!?!
Thanks!
Click to expand...
Click to collapse
I had the exact same issue, took all the same steps you did, and had all the same frustrations. The last thing I tried though was to dd the debrick img to the internal memory of the phone via a terminal session running from my sdcard booted phone. figured I had nothing left to lose. It worked. I got the phone booted to download mode without the card in and restored my phone. I will add that I am no expert so this might be the worst idea ever. but my phone has been running since the 31st.
Bradkirk said:
I had the exact same issue, took all the same steps you did, and had all the same frustrations. The last thing I tried though was to dd the debrick img to the internal memory of the phone via a terminal session running from my sdcard booted phone. figured I had nothing left to lose. It worked. I got the phone booted to download mode without the card in and restored my phone. I will add that I am no expert so this might be the worst idea ever. but my phone has been running since the 31st.
Click to expand...
Click to collapse
How did you make the connection to the phone memory.. ADB? I brought mine to the shop. They said two groups tried to fix it and couldn't. I am going to keep trying (glutton for punishment).
dwolder said:
How did you make the connection to the phone memory.. ADB? I brought mine to the shop. They said two groups tried to fix it and couldn't. I am going to keep trying (glutton for punishment).
Click to expand...
Click to collapse
forgive me, I'm no expert but I'll try to list what I did.
booted the phone via SD card and restored a backup so that I was running a rooted custom 4.3 ROM. I also had the terminal emulator program installed on the phone. so everything worked great at this point except I needed the SD card in the phone to boot.
the image I used for the SD card boot is a 16GB (version not file size) Bell I747M dump of a stock phone, called debrick.img. Sorry I cant remember where I got it but it was here on XDA. To get it on the SD card to begin with I used the terminal emulator on my old i9000(m) and the dd command.
So, to reverse the process I opened the terminal emulator on my SD booted, running I747M. typed: su <enter> to give the app superuser access (allowed root access when prompted) then changed to the directory on the sd card containing the debrick.img file just to save me typing the full path in the command. the internal SD of my phone is found at /dev/block/mmcblk0 as opposed to mmcblk1 for the external SD.
so , moment of truth. I used; dd if=debrick.img of=/dev/block/mmcblk0 <enter> This was the part I mentioned could be the worst idea ever because from what I think I understand, you are writing directly to the boot partition of the SD and could completely screw up all the partitions and whatnot.
after that, crossed my fingers and turned the phone off, pulled the SD card out and luckily booted right up into download mode. Used Odin to get back up and running. Hope that helps or at least doesnt make anything worse for you.
help me please
hey friend, you could climb the debricked.img of i747m to a download server or give me the link where obtubiste, I'm going through a hard brick on the terminal for the same reasons as you, please appreciate what you really so
aisakblack said:
hey friend, you could climb the debricked.img of i747m to a download server or give me the link where obtubiste, I'm going through a hard brick on the terminal for the same reasons as you, please appreciate what you really so
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2345860&page=18 2nd post down has the link I used. Reading the whole thread would be a good idea.
It worked for me
Bradkirk said:
forgive me, I'm no expert but I'll try to list what I did.
booted the phone via SD card and restored a backup so that I was running a rooted custom 4.3 ROM. I also had the terminal emulator program installed on the phone. so everything worked great at this point except I needed the SD card in the phone to boot.
the image I used for the SD card boot is a 16GB (version not file size) Bell I747M dump of a stock phone, called debrick.img. Sorry I cant remember where I got it but it was here on XDA. To get it on the SD card to begin with I used the terminal emulator on my old i9000(m) and the dd command.
So, to reverse the process I opened the terminal emulator on my SD booted, running I747M. typed: su <enter> to give the app superuser access (allowed root access when prompted) then changed to the directory on the sd card containing the debrick.img file just to save me typing the full path in the command. the internal SD of my phone is found at /dev/block/mmcblk0 as opposed to mmcblk1 for the external SD.
so , moment of truth. I used; dd if=debrick.img of=/dev/block/mmcblk0 <enter> This was the part I mentioned could be the worst idea ever because from what I think I understand, you are writing directly to the boot partition of the SD and could completely screw up all the partitions and whatnot.
after that, crossed my fingers and turned the phone off, pulled the SD card out and luckily booted right up into download mode. Used Odin to get back up and running. Hope that helps or at least doesnt make anything worse for you.
Click to expand...
Click to collapse
Your method worked for me. Very clever and thank you. I did have to do some modifications of the partitions to fit the 145MB debrick.img file. I also had to mount it as a 2nd partition from the sdcard. Once, was in dowload mode without original debrick sdcard, I flashed the clockworkmod recovery then restored one of my previous back thus retaining root.
Mind sharing the i747m Debrick.img?
Seems like the link from the post you linkd us to is not working, clicking download does nothing :/ currently have a bricked Bell S3 and need a debrick.img
Bradkirk said:
http://forum.xda-developers.com/showthread.php?t=2345860&page=18 2nd post down has the link I used. Reading the whole thread would be a good idea.
Click to expand...
Click to collapse
Same for me, I really need that link to be working:good:
So I never got the 4.3 OTA BUT I did install the UCUEMJB Bootloader, but not the modem to use the 4.3 Dandroid Rom, about all month before that I was happily on CM11, and loved it. I try Dandroid because I hate Touchwiz so much, but thought this might cure my want to switch ROMs all the time.
I tried to port the Moto X 4.2.2 Rom, and decided to flash it. The phone came on once with the Samsung logo, Went off, and usually it would vibrate and vibrate meaning something is wrong, this time it just went off and didn't vibrate at all.
It is hard bricked from my understanding, but I have no way of getting a JTAG Done, and I'm waiting on a JIG I ordered, but this is becoming too long without a phone. I bought 3 100K Ohm resistors, and tried the method here: http://forum.xda-developers.com/showthread.php?t=889128 and I can't seem to get it to work.
I tried the USB Debrick img for the JB Bootloader, but that didn't work neither. The battery is good, and works and everything, Just trying to rule out everything so many you can help me a little better.
Does anyone have any idea what to do? I can't afford a Riff box neither.. if I can get it fixed I'll just stick with one Rom this time, lol.
is there any way to JTAG without the Riff Box, or anything I can do? I'm willing to try anything at my power.
Thanks in Advance.
lemonboi5 said:
So I never got the 4.3 OTA BUT I did install the UCUEMJB Bootloader, but not the modem to use the 4.3 Dandroid Rom, about all month before that I was happily on CM11, and loved it. I try Dandroid because I hate Touchwiz so much, but thought this might cure my want to switch ROMs all the time.
Click to expand...
Click to collapse
You should try http://forum.xda-developers.com/showthread.php?t=2549068 you were on 4.3 these files are for 4.3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
You should try http://forum.xda-developers.com/showthread.php?t=2549068 you were on 4.3 these files are for 4.3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply!
I have been looking at that all morning, so even if I flashed the Moto X Rom that was ported, I shouldn't need JTAG?
Also, let me get this straight.. I use WinDiskImager to put the img file on the SD card, via my SD card reader, and then Pull the battery, put in the SD card, put in the battery, and turn on the phone? because I've tried that and it doesn't work at all for me.. unless I'm missing something here, I'd love to know!
You are using a 16GB or larger card right?
You aren't trying to get the phone to power on just yet. Only trying to get to recovery mode so you can flash stock 4.3 stuff and get going again.
With that said...
It appears it is only about 70 percent successful. I have had reports from folks that said they had to write the .Img file several times in a row in their SD card slot in the computer to get it to work.
You may have to get a debrick file from someone running the same rom you were trying to flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
When you plug your phone into your PC, do you get a box that pops up and reads something like "can't load drivers QHSUSB DLOAD"?? If so, this is what I did. I followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=2581166
I used the AT&T image from this thread (I was on Paranoid Android 4.3, FYI):
http://forum.xda-developers.com/showthread.php?t=2345860
Worked just fine.
Now, the link in the post above me mentions Odin'ing back to 4.1 so you don't have to boot from your SD card anymore. I didn't do that. When mine booted, it booted into Recovery and I flashed my Paranoid Android 4.3 ROM and GApps. That worked fine and all my data was intact, but yeah, it meant That I'd have to boot from SD card every time. To get past that, I plugged my phone in, copied the AT&T .img file from my PC (note, I copied...I didn't image it. When you image it, it pulls files from the .img file and writes a partition containing them. You don't want to do that in this case) to a random internal SD card file folder on my phone. I had to do it that way cause that AT&T .img was too big to fit on my SD card imaged with the debrick boot files. I then I opened my file manager app on my phone and moved the .img file to the /SDCARD folder. From there I used the terminal emulator and followed the instructions from the link I posted first, typing
su
dd if=/sdcard/debrick.img of=/dev/block/mmcblk0
Took my SD card out. Restarted. It booted into recovery again, I flashed my PA 4.3 ROM and at that point I was able to boot without the SD card and didn't have to Odin back to an older version. Finally, I used the SD formatter here:
https://www.sdcard.org/downloads/formatter_4/
And formatted my SD card back to allow full usage. Copied all my old files and pics back on it and I was straight!
theramsey3 said:
You are using a 16GB or larger card right?
You aren't trying to get the phone to power on just yet. Only trying to get to recovery mode so you can flash stock 4.3 stuff and get going again.
With that said...
It appears it is only about 70 percent successful. I have had reports from folks that said they had to write the .Img file several times in a row in their SD card slot in the computer to get it to work.
You may have to get a debrick file from someone running the same rom you were trying to flash.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Its an 8GB Sandisk D: Is there a difference in the way it performs? I'm flat broke atm, but if someone can point me in direction of a cheap 16GB or bigger card, I'll go after it for sure.
Charles: said:
When you plug your phone into your PC, do you get a box that pops up and reads something like "can't load drivers QHSUSB DLOAD"?? If so, this is what I did. I followed the instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=2581166
I used the AT&T image from this thread (I was on Paranoid Android 4.3, FYI):
http://forum.xda-developers.com/showthread.php?t=2345860
Worked just fine.
Now, the link in the post above me mentions Odin'ing back to 4.1 so you don't have to boot from your SD card anymore. I didn't do that. When mine booted, it booted into Recovery and I flashed my Paranoid Android 4.3 ROM and GApps. That worked fine and all my data was intact, but yeah, it meant That I'd have to boot from SD card every time. To get past that, I plugged my phone in, copied the AT&T .img file from my PC (note, I copied...I didn't image it. When you image it, it pulls files from the .img file and writes a partition containing them. You don't want to do that in this case) to a random internal SD card file folder on my phone. I had to do it that way cause that AT&T .img was too big to fit on my SD card imaged with the debrick boot files. I then I opened my file manager app on my phone and moved the .img file to the /SDCARD folder. From there I used the terminal emulator and followed the instructions from the link I posted first, typing
su
dd if=/sdcard/debrick.img of=/dev/block/mmcblk0
Took my SD card out. Restarted. It booted into recovery again, I flashed my PA 4.3 ROM and at that point I was able to boot without the SD card and didn't have to Odin back to an older version. Finally, I used the SD formatter here:
https://www.sdcard.org/downloads/formatter_4/
And formatted my SD card back to allow full usage. Copied all my old files and pics back on it and I was straight!
Click to expand...
Click to collapse
is your SD card bigger than 8GB? That's what I have, and I'll try all of this and report back
My phone doesn't turn on at all, So You mean to copy the IMG file to the SD Card? or the files from the IMG File to the SD card? I am not able to get into any file managers and ADB can't read my phone at all :/
First off, you need a card larger than 8gb. It has to be at least 16gb. Mine was 32gb.
Second, to get it to turn on at all, you need to use the disk imager listed in the thread I posted. WinDiskManager or whatever it's called. Grab the AT&T .img file from the second link (that's the one that worked for me...not sure it will for you) and save it somewhere on your PC. Open the disk imager and choose the AT&T .img file, then use the drop down and select your SD card (whatever letter your PC assigned it) and finally, click "write". That will image the files contained in the .img file to your SD card and partition it as bootable. Put the SD card in your phone, turn it on, and it should turn on to recovery at least. Once we get there, we can tackle moving the .img file to where it needs to be on your phone so you don't have to boot from the SD card anymore.
Yes exactly it is mandatory that your card MUST be 16 gb or bigger. What we are doing is mimicking the internal storage on the phone and tricking the phone into booting into recovery to fix what we messed up. Walmart has fairly cheap SD cards. They're cheaper than $50 to get a jtag and faster too.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Oh okay I get it now. Thanks for the explanation. I'll be on the look out for a 16GB.
Oh okay I get it now. Thanks for the explanation. I'll be on the look out for a 16GB. I found some cheap on Ebay for $10 when I get paid I'll get one! (Living check to check... lol) I also went ahead and bought a jig for $1.89, I'm asking around if any of my friends have an extra 16GB SD, most likely not though. Thanks for the replies!
BTW, My phone is like. Dead. Doesnt even power on or anything, but I do get the QHSUSB DLOAD thing, and if I plug it in without a battery I get a Red LED indicator, is that how you guys have explained previous phone states?
I never had it plugged in without the battery, but yes, when I plugged it into my PC, I got what you're getting. We should be able to get you back in business. Hurry up and get an SD card. Hell, go buy one, use it, then return it.
Charles: said:
I never had it plugged in without the battery, but yes, when I plugged it into my PC, I got what you're getting. We should be able to get you back in business. Hurry up and get an SD card. Hell, go buy one, use it, then return it.
Click to expand...
Click to collapse
Holy crap sir, I like the way you think.
Edit:
So I was able to get my sister to loan me the money to get one and return it lol.
So now I flash it with the AT&T Debrick Img...
pull the battery, insert SD, insert battery, try to turn it on?
Or am I missing something? lol
Going to pick it up now, just wanted to retrieve the "What now" steps ahead of time! Thanks everyone!
Charles: said:
I never had it plugged in without the battery, but yes, when I plugged it into my PC, I got what you're getting. We should be able to get you back in business. Hurry up and get an SD card. Hell, go buy one, use it, then return it.
Click to expand...
Click to collapse
I got an SD card, I tried the img's and it still wont turn on D:
Its a Class 10 Samsung 16GB Micro SD card, Currently keep trying to write the Debrick-SGH-i747U-CUEMJB3.img, and trying it out, still not working. Is that the OTA Bootloader? JB3? Or just JB? Or maybe its the J2 Bootloader I have with a JB3 Modem... forgive me lol.
Dead phone still.. I think I wanna cry lol
Edit:
In addition this is what I'm getting..
qualcomm hs-usb qdloader 9008 (COM4)
No idea what that means, but it shows up in Device Manager.
I've been trying and trying to flash this img and get it to come on, still not working
Did you image the SD card with this program?:
http://sourceforge.net/projects/win32diskimager/
After you image it, check your SD card in Windows Explorer and verify there are files on it. There should be quite a few.
If you did and the image you tried to flash didn't work, did you try the AT&T image that I linked to in my first post? This one?
http://d-h.st/iEy
Charles: said:
Did you image the SD card with this program?:
http://sourceforge.net/projects/win32diskimager/
After you image it, check your SD card in Windows Explorer and verify there are files on it. There should be quite a few.
If you did and the image you tried to flash didn't work, did you try the AT&T image that I linked to in my first post? This one?
http://d-h.st/iEy
Click to expand...
Click to collapse
The files are on the SD card in a folder called "image".. that doesn't sound good. I browsed for the .img and wrote it to the sd and everything D: I've done this a lot, any idea?
lemonboi5 said:
The files are on the SD card in a folder called "image".. that doesn't sound good. I browsed for the .img and wrote it to the sd and everything D: I've done this a lot, any idea?
Click to expand...
Click to collapse
Yes...that's correct. My SD card had numerous files in a folder named "Image", so it seems you're doing that portion correctly.
Did you try the AT&T image that I linked to? That one was named different from the one you referred to in your previous post.
Just to cover your bases, try both AT&T images that were linked to in this thread. If it's still not working...don't know what to tell you.
Charles: said:
Yes...that's correct. My SD card had numerous files in a folder named "Image", so it seems you're doing that portion correctly.
Did you try the AT&T image that I linked to? That one was named different from the one you referred to in your previous post.
Just to cover your bases, try both AT&T images that were linked to in this thread. If it's still not working...don't know what to tell you.
Click to expand...
Click to collapse
Yes, I've tried that one, and the one that theramseys uploaded, I just don't know if I'm doing something wrong here.
I stick in the sd card, and try to turn it on? it doesn't power on still.
So stuck here I've done the 3 button combo, and everything. it just wont turn on :/ Any more ideas? Should I just try it with linux? but then again how bad can Windiskimgr actually be?
I miss my phone so much! lol
I dunno, man. I flashed the image I posted, put the SD card in and it turned on. Just pressed the power button.
Charles: said:
I dunno, man. I flashed the image I posted, put the SD card in and it turned on. Just pressed the power button.
Click to expand...
Click to collapse
No tricks to it? I even tried using dd in linux, still nothing. If all fails I hope the jig works that I ordered. I was porting that Moto X rom from a Cyanogenmod 10.1.3 Base, but had swapped out mostly permissions and framework, I didn't touch the boot.img or anything like that.. I did kind of touch up on the updater-script, but still I don't see how that'd brick it, usually it'd give me a status7 or something if it didnt work, or even vibrate, turn on, then vibrate twice and restart, till I'd put it back into recovery, but with that 4.3 Rom I was throwing root issues, and every time I re-flashed it, I had to re isntall CWM
Yeah, just uncovered a new chapter of the story.. lol Hopefully we can work with this at all.
I tried to downgrade to a 4.2.2 Version from 4.3, and had a 4.3 Bootloader,
before all of this I was happily on the CM11 Rom, and should have stuck with it.. Curiosity killed the kitkat.
My phone is in recovery but I cannot flash any roms because I have none in internal memory and for some reason it refuses to read anything on my sd card. I was able to recover a rom I had backed up before but as it had booted up, it shut down on its own and now it just goes back to recovery. No matter what I do, it just reboots into recovery. I tried connecting my phone to the pc using the USB cable but it will not let me copy anything into the internal memory. It wont even show me my sd card anymore. I have tried mounting it but nothing works. Any idea what it can be? Any help would be highly appreciated. I am on TWRP 2.8.0.0.
Have you tried using adb sideload to push a new rom zip onto internal storage?
http://teamw.in/ADBSideload
Mostly adbsideload will work.
Worked with me before on xperia tx. And i think it work with any device!!
I'm a ****ing idiot. I was going to install a new ROM and I was wizzing through everything and accidentally clicked ext SD card on the wipe screen....
EVERYTHING was on there. My last ROM backup, my Titanium backups... even the rom I was flashing. I literally have nothing on my phone.
I know I can use adb to push the new rom through but I'm still losing ALL my data. ALL my pictures and songs and EVERYTHING will be gone forever.
Is there ANY way to recover from a wipe???
MutatedGamer said:
I'm a ****ing idiot. I was going to install a new ROM and I was wizzing through everything and accidentally clicked ext SD card on the wipe screen....
EVERYTHING was on there. My last ROM backup, my Titanium backups... even the rom I was flashing. I literally have nothing on my phone.
I know I can use adb to push the new rom through but I'm still losing ALL my data. ALL my pictures and songs and EVERYTHING will be gone forever.
Is there ANY way to recover from a wipe???
Click to expand...
Click to collapse
try to remove it, put it on a pc, and use a software like recuva, but i don't know if it works on flash memory
Undeleter!
Doesnt work everytime but definetly worth giving it a try.
Snoob25 said:
try to remove it, put it on a pc, and use a software like recuva, but i don't know if it works on flash memory
Click to expand...
Click to collapse
My issue is I don't have an sd card reader on my computer and I can't select my G3 from Recuva using the TWRP mount.
Download said rom or any on flash drive and use otg cable or dollar stores got sd card to usb converters walmart any one but i use otg in the case
MutatedGamer said:
My issue is I don't have an sd card reader on my computer and I can't select my G3 from Recuva using the TWRP mount.
Click to expand...
Click to collapse
I take it you have a usb port just order a micro usb sim reader don't cost much and try recuva from there
or, if you don't care about data that was on INTERNAL sdcard, you could, remove your external sdcard from phone, restore phone, boot phone, insert sdcard, and then mount sdcard as mass storage (i never did it, but it should be some root app that enables it), then recuva
MutatedGamer said:
My issue is I don't have an sd card reader on my computer and I can't select my G3 from Recuva using the TWRP mount.
Click to expand...
Click to collapse
Use PhilZ Recovery (flashable ZIP):
https://onedrive.live.com/redir.asp...E!2560&authkey=!AEWRy1uDVQUYt5o&ithint=file%2
This recovery image allows you to mount your microSD card as a USB Mass Storage device - simply go to 'Mounts & Storage', then 'Mount USB Storage' (or similar).