Related
Hi all;
i think my SE Xperia Play has crasehd (since some months)
sent it to the nearest phone shop; they said they cannot repair.
It doesnt power on; the red light keeps blinking;
My PC or any MAC doesnt detect the phone when plugged in.
A friend of mine asked me to flash it through a linux-operating computer.
What should i do..
Thhanks.
Vinessen
omg, I got the same problem too. can't turn on completely. just the red led blinking. can't flash any roms because pc doesn't detect my Xperia PLAY :c
Xperia play not being detected by pc
Yeah, in fact when connecting it yesterday the pc displayed 'unknown device' connected but
afterwards says that the device has malfunctioned..
i tried reinstalling the drivers to no avail..
vsen1407 said:
Yeah, in fact when connecting it yesterday the pc displayed 'unknown device' connected but
afterwards says that the device has malfunctioned..
i tried reinstalling the drivers to no avail..
Click to expand...
Click to collapse
what drivers did you install?
try flash fw using flashtool..
ezadsyafiq99 said:
try flash fw using flashtool..
Click to expand...
Click to collapse
how can I flash fw using flashtool if the computer doesn't recognize my phone...
i think nobody can really help us here (just like on the official Sony support forum)
i tried lots of things but still nobody could help me out with this prob.
Think gonna throw that ****ing phone to the trash!
vsen1407 said:
i think nobody can really help us here (just like on the official Sony support forum)
i tried lots of things but still nobody could help me out with this prob.
Think gonna throw that ****ing phone to the trash!
Click to expand...
Click to collapse
yeah me too... :c and buy a new phone. huhu...
Dead boot??
After some research on the net, i foud something called dead boot;
Apparently medusa or setool2 can solve the problem;
CAn anyone help to use this software?
There's something called Testpoint used to recover the r800i??
Please help
Thanks
vsen1407 said:
After some research on the net, i foud something called dead boot;
Apparently medusa or setool2 can solve the problem;
CAn anyone help to use this software?
There's something called Testpoint used to recover the r800i??
Please help
Thanks
Click to expand...
Click to collapse
hey, my phone was fixed. yes it used that testpoint thing. try contact Alejandrissimo (here's his gmail, [email protected])
he is the one who help me about the dead boot problem.
aslo, go http://forum.xda-developers.com/showthread.php?t=1252019
Dead Bootloader
Hi there; I sent her a mail, not replied yet; but would surely answer..
So you mob got fixed?? Glad for you; it gives me hope..
can you explain me how the process goes on?
Thanks;
Vsen1407
I also heard that the guys who unlock bootloaders can also fix that problem using that method, but I guess you fuys figured it out already so im to late to help. Good luck.
Sent from my R800i using xda premium
Try plugging usb into pc and hold the power and the search key for a couple secs?
Sent from my R800i using xda app-developers app
have a look at this post guys: http://forum.xda-developers.com/showthread.php?t=1252038
might just work for you too.
if a phone shop cannot repair, there's always sony repair, i had no option but to do the same
tampering with you're phone can void warranty and is always not suggested
Got some similar probs with my old k610....tohh it to repair and after 8 weeks with guarantee problems,not gettin informed....i got the answer the problem is not fixable.took it back home,plug power on, pressed the power button and this got damn thing worked fine like nothinh ever happened...
Sent from my R800i using xda premium
ihsanfauzi said:
omg, I got the same problem too. can't turn on completely. just the red led blinking. can't flash any roms because pc doesn't detect my Xperia PLAY :c
Click to expand...
Click to collapse
Have you found any solution....pls let me know.....im also facing this problem
Hello Everyone
I tried to find a solution without troubling anyone, so I searched a lot and a lot of threads all over the internent with no hope . I have tried as many possiblesolutions as I could find even those which are not meant for xperia play. I will explain everythingvery clearly for those who want to help or even try to ...
The Problem :
My Xperia Play suddenly doesn't get pass the Sony Ericsson text at the boot screen which appearsas soon as you turn on the device. It keeps hanging on that white text on that black background for hours until I pull out the battery . I then found out that if I connect my charger before turning on the device it will boot normally as usual . I also found out that as soon as I disconnect the charger cable , the phone will immediately turn off. Another important issue is that even when I mamange to boot the phone normally by the charger , the screen does not respond to my touch even in CWM touch recovery in Doomkernel . Despite that , I can operate the phone completely using the key pad . That means the phone is full functional except for the " boot " and " touch " problems.
What I have done so far :
- I flashed different stock firmware FTF several time via Flash Mode including .42 , .58 enhanced , and .62 using flashtool with flashing ending in success each and everytime .
- I flashed different kernels via Fastboot Mode including DoomlordKernel v14 (GB ) , DoomlordKernel v3 ( ICS ) , and Lupusv11 ( ICS)
- I have accessed CWM recovery serveral times and formated each and everything that could be formatted including data , system , cache ..etc
- I have also tried flashing different ROMs such as NXT 1.3 and Markpython XPlay ICS
- I have put phone in a rice bag in case it had moister or water damage !
- I have disassemble the phone completelypart by part and found nothing damaged so I cleaned it and ressambeled it again
- I have left the phone for days without turning it on . I also tried keeping the battery out for several hours.
- I have used a replacement new battery just in case it was my battery has a problem.
- I relocked my bootloader and repaired my phone via Sony Update Service and the repairing process endedin success.
The results so far :
Nothing changed at all . After doing all of the above and repeating it. I even did more things I can't remember now.Everything is still the same. The phone is stuck at SE text at boot screen and if connected to charger then turned on it will boot normally but the touch screen doesn't respond for some reason I can't figure out , although the digitizer is intact.
What I am doing now :
- I have no more trick to try and I am totally depressed about this ZOMBIE Xperia Play which is half working and half borken.
Thank you very much for your time and for trying to help
I am waiting for your suggestions ...
For your touch screen problem, I doubt that the digitizer is damaged. As for your booting issue, I'm not sure.
looks like the battery doesn't give enough power to the phone
jeff7424 said:
For your touch screen problem, I doubt that the digitizer is damaged. As for your booting issue, I'm not sure.
Click to expand...
Click to collapse
Maybe it is invisabely damaged . However, if I can't fix my boot issue , getting a replacement digitizer is just a waste of money.
nickholtus said:
looks like the battery doesn't give enough power to the phone
Click to expand...
Click to collapse
I tried using a new battery the other day at the phone's shop and the same thing happened . The phone just
doesn't continue to boot and get stuck at Sony Ericsson text.
nickholtus said:
looks like the battery doesn't give enough power to the phone
Click to expand...
Click to collapse
The power turns on and the screen turns on when the I power the device. The problem is booting into the system.
It get stuck at Sony Ericsson text . However, it's very mysterious why the phone turns off when the charger is disconnected , perhaps the real question is : how come the battery powers the device but can not boot it and keep it running ?
You didn't say what version is your xperia play is. Is it R800x, R800i, R800a, R800at? If you have the xperia play CDMA version you cant use GSM kernel or roms.
I dropped my phone (after replacing the housing) and had the same thing happen to me. Opened it up again and the digitizer cable was loose. Fixed it for me.
EDIT- My phone would turn on without the need of the cable, but i couldnt mount my sd card/enter mtp unless i connected the usb cable prior to turning it on (so my issue was slightly different).
chery2k said:
You didn't say what version is your xperia play is. Is it R800x, R800i, R800a, R800at? If you have the xperia play CDMA version you cant use GSM kernel or roms.
Click to expand...
Click to collapse
It's R800i , and it is used to work normally. I also tried stock kernel and nothing changes ... the problem persists.
Thanks for trying to helo.
Nabeel_Nabs said:
I dropped my phone (after replacing the housing) and had the same thing happen to me. Opened it up again and the digitizer cable was loose. Fixed it for me.
EDIT- My phone would turn on without the need of the cable, but i couldnt mount my sd card/enter mtp unless i connected the usb cable prior to turning it on (so my issue was slightly different).
Click to expand...
Click to collapse
I already opened up my device and disconnected the digitizer cable and reconnected it and the touch was
still not working but I'll try it again as soon as I fix my boot issue. The phone doesn't boot to the system
unless connected to the charger prior to turning it on.
my phone is only 6 months old ... It runs perfectly when connected to charger but as soon as I disconnect it the phone turns off ... using a new battery doesn't solve the problem ... what could it be that causing this ?!
Final Solution to your problem
You will have to use odin. Just connect it to a laptop/desktop and run Odin. It will fix your problem and if this doesnt work you will have to send it to a Sony centre in your neighborhood. But I am sure odin will fix it. I had a similar problem once. So try odin.
Click thanks if you appreciate this
Download link to odin http://www.android.gs/download-odin-3-07/
Xperia Gamer said:
You will have to use odin. Just connect it to a laptop/desktop and run Odin. It will fix your problem and if this doesnt work you will have to send it to a Sony centre in your neighborhood. But I am sure odin will fix it. I had a similar problem once. So try odin.
Click thanks if you appreciate this
Download link to odin http://www.android.gs/download-odin-3-07/
Click to expand...
Click to collapse
I never used this program before . I thought it was flashtool equivalent for samsung phones. I guess I was wrong. I really appreciate your help . Could you please explain more about the process. Give me steps to follow... Thank you very much I really appreciate your great help.
I'm pretty sure Odin is only for Samsung phones as the phone has to be in "download mode" for anything to work and well Sony devices don't have a download mode
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™
crazymonkey05 said:
I'm pretty sure Odin is only for Samsung phones as the phone has to be in "download mode" for anything to work and well Sony devices don't have a download mode
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
Odin is only for Samsung phones, and I'm having an issue quite similar with my Play R800at. I just got it from a friend. It boots, continues up to ATT screen, then resets. I can't figure out how to boot into recovery, I can't find flashtool, I'm completely lost. I should have stuck with my S3.
powerfries said:
Odin is only for Samsung phones, and I'm having an issue quite similar with my Play R800at. I just got it from a friend. It boots, continues up to ATT screen, then resets. I can't figure out how to boot into recovery, I can't find flashtool, I'm completely lost. I should have stuck with my S3.
Click to expand...
Click to collapse
Well Sony xperia devices don't have a stock recovery...so it should go into fast boot if you take the battery out and hold search on the phone,plug the USB into the PC and the phone led should turn blue and bam your in fast boot
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™
I did fix the boot loop issue. If you download the Sony pc companion, hold the back button and plug the usb in at the same time, it will download a repaired version of the latest firmware and fix the boot loop.
Sent from my R800at using xda app-developers app
Just wondering but did anyone solve the initial issue as the same thing has happened to my xperia r800i
1. Flash ftf with flashtool
2. Flash gb/ics/jb kernel
3. Flash gb/ics/jb rom via the kernel recovery
It should do it but kernel has to match the ROM.
Example: if i want to flash jb rom then I have to flash jb kernel.
Sent from my R800i using xda app-developers app
The flashtool gets stuck on 2 percent how do I fix it?
Odp: Totally Depressed : My Xperia Play is Stuck at Sony Ericsson Text at Boot Screen
Try to flash it again.
Sent from my R800i using xda app-developers app
Update to latest flashtool then flash it.
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!
hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..
ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!
Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34
Hey all,
Yesterday I was about to flash a new ROM on my wifes Xperia S. She had an old ICS rom and I decided to go for the PAC MAN JB 4.2.2 ROM. Seemed ok.
I own a SGS2 myself so I consider myself a total noob when it comes to the Sony.
I know CWM works on on the XS and I am pretty sure I installed it when I romed it last time. Although I didn't remember how to enter CWM mode so I installed it again through that .bat file that comes with it.
I downloaded the ROM and the GAPPS and copied both to the phone. And now I thought I was set and went for it. Of course I did a Nandroid backup before and also from within the phone a full backup in Backup & Restore. Bootloader is unlocked by the way.
So now I boot into CWM and I do a full wipe/factory reset. I clear the cache and dalvik and also I format the system as he guides us to do in his installation video.
I then installed the rom or at least tried. Got the status 7 together with some error I can't remember.
I read then that people had issues downloading the rom with google chrome which sounds pretty far fetched but I decided to do what other did and downloaded the rom from firefox.
Then within CWM I thought to start the USB and copy it directly in CWM since I already had reset the phone and didn't want to go through the "new phone" routine. But the USB in CWM didn't work so I had to restart the phone.
It then got stuck on the initial SONY logo screen and I'm stuck there now.
I have installed the Flash tool from SONY coz I read in another thread that the only way out is to install stock rom. However when I connect the phone holding volume down windows 8 always say that the USB device is not recognized. I have of course rebooted the PC after.
I'm going to try this on my Windows 7 PC as well later after work but I dread I will be stuck there as well.
Can anyone shed some light on how I can get my wifes Xperia S to be recognized by her Windows 8 laptop? Or have I bricked her phone?
I have thought many times that I bricked my SGS2 but always came out on top, I don't want to lose this battle either.
if it says "Unknown Devices" when you plug the phone to the computer, try change an USB line or change a computer
if it says "Unable to install the driver" or another something like this when you plug the phone to the computer, try install the Flashtool driver
...any screenshots?
Windows 8 gives a balloon tip saying exactly "USB Device not recognized". And I did install the Flashtool to get the driver but I guess I still miss the correct driver here.
I will do some more troubleshooting after work. I just thought maybe someone had similar problem and had a quick and easy solution.
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Gripa98 said:
It also happend to me, just turn it off and flash stock firmware with flashtool (select all under wipe)
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Ok I actually managed to get it connected on my Windows 7 PC.
I installed Emma (Flashtool) and it installed something but I'm not sure really what happened to be honest. Light on the phone was green and it installed 4.0.4 ICS.
It was a success after about 217 seconds but after that the phone didn't do anything. Stayed with green light and when I disconnected it it could not be started at all.
Maybe it doesn't have enough power to start up. It is on 220V charge now so lets see what will happen with it.
Bergaliden said:
The issue is not actually the "stuck on SONY logo". The issue is that the computer wont recognize the phone when I connect through USB.
What did you use to get the correct driver?
Click to expand...
Click to collapse
I just installed pc companion
Sent from my LT26i using xda app-developers app
Good news y'all.
All it needed after using Emma was some juice. Now it is back to it's normal self. And I'm not going to ROM it anymore. Soon JB will be officially out for XS.
True!! When I was a noob, I tried to flash cyanogrnmod on my galaxy ace (it was a year ago) and I stuck in bootloop. Idk what to do and I regret it, from that day I never flash any rom. But this year I flash xzxperience on acro s and it works but not so happy and then I flash stock firmware to normal. And I regret because i ve unlocked bootloader!! And now BE is not working anymore.
Sent from my LT26w using xda premium
Hello, I've been searching for a situation like mine for a while and was unable to find it.
My phone had the screen destroyed over the weekend and I purchased one that would not turn on to replace the broken screen. I swapped the motherboard from my working phone into the broken phone.
When I hit the power button, it vibrates and the screen will get power (no display, just a blank backlight) and the phone will power back off.
It will not boot in safe mode either.
Is this a symptom of a broken motherboard? Or are there other things I can try? I have not had a chance to hook it up to try the pc companion.
I have the old screen assembly (with the flex cable and such, digitizer and LCD are shot)
My phone is not rooted, and it is unlocked.
Any help would be appreciated. Thank you for reading!
Update:
Connected to Sony pc companion. Pc companion recognized that there was a phone and allowed me to run a repair.
Charging light came on during process (was not responsive previously).
Still will not boot. Only charges when hooked up during repair.
Still no recovery mode :/
Are there any secondary recovery programs available that you would recommend?
Sorry for the double post.
Sent from my SK17i using XDA Free mobile app
Mattsand89 said:
Update:
Connected to Sony pc companion. Pc companion recognized that there was a phone and allowed me to run a repair.
Charging light came on during process (was not responsive previously).
Still will not boot. Only charges when hooked up during repair.
Still no recovery mode :/
Are there any secondary recovery programs available that you would recommend?
Sorry for the double post.
Sent from my SK17i using XDA Free mobile app
Click to expand...
Click to collapse
I'm thinking that you might have a hardware problem rather than a software problem, but if you want to try to play around some more with possible software fixes... you'll want to learn how to use Androxyde's Flashtool program. It allows us to flash firmware onto the Xperia Play, with both locked and unlocked bootloaders. (Also, I'm not sure if you are trying to get the phone to boot into a stock recovery, but the Xperia Play does not come with a stock recovery like most other android phones. If you want a recovery on it, you would need to install one).
Here's the site where you can grab the most recent Flashtool: http://www.flashtool.net/index.php
---------------------------
Here are some links to Flashtool Tutorials:
http://forum.xda-developers.com/showthread.php?t=1384535
http://forum.xda-developers.com/showthread.php?t=2054486
---------------------
Here's a thread where you can find FTF firmware files to flash with Flashtool:
"Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S" - http://forum.xda-developers.com/showthread.php?t=2184897
----------------
For hardware issues.... here's a thread that I had bookmarked that gives good tips for repairing the hardware on the phone: http://forum.xda-developers.com/showthread.php?t=2332296
Good luck!
Thank you! I spent the whole weekend trying the software fix. It had no result so I tried the hardware like you suggested. I swapped the ribbon cable and it did the trick!
Mattsand89 said:
Thank you! I spent the whole weekend trying the software fix. It had no result so I tried the hardware like you suggested. I swapped the ribbon cable and it did the trick!
Click to expand...
Click to collapse
:good: That's good to hear. Good work with sticking with it until you got it fixed.