Develop Bugs

[Q] weird things happening after flashing different roms

I recently learned to flash,
So I used TWRPV to flash coz i cant access the recovery mode becoz of rooting.
1.Flashed Slim Bean. Worked perfectly.
2.Try to flash jellybam. Got flashin failed.
3. Reflshed Slim Bean.
4. Tried to flash Miui rom. Again got error, after googling i found that i have to delete two lines from the script in miui rom with note++
I did that but not worked, then i myself checked the slimbean script, and deleted some more lines from miui script and flashed, still not worked.
5. I did same to jellybam. Then one of jellybam rom worked.
6. Now after reboot some times note 2 switch off itself when in pocket or in table. Or sometime while charging with big battery on screen with stuck tiny round circle. I have to remove the battery to switch on.
and i can't turn on bluetooth also USB not working. In pc device manager when i connect phone to pc via usb it shows CDC COMMUNICATION INTERFACE (7 times), and Com neon Suspend (1 Times)
7. Now using slimbean but problem is still there.
Any idea what happened to my n7100, is my phones efs corrupted, or soft/hard bricked,
I don't have any backups.
Can anybody please help me. I posted it here coz I can't find the same problem anywhere. There arevsimilars but they are different.
And bad English coz I'm Apatani.
Sorry for that.
My note 3 was SICK from some times (from 7 Months)
Some said it was EFS corruption. my problem was occurred because I flashed my N7100 with MIUI rom built for Galaxy S3.
My Bluetooth was not turning ON (Blank in bluetooth adress), Usb not workin with PC, turning of or Freeze while phone sleeps or auto lock.
Tried many things Flashed different Modem or Kernels, Flashed all of the custom roms available for N7100, Flashed Stock from SamMobile site.
and Lost hope... then I continued my daily life with my N7100 (using Red EYE sleep disabler)
But now today I already using Ditto Note 3 v.3.0 (Used v.1.0,v.2.0,)
today Flashed Ditto Note 3 v.3.1.1 with aroma
Selected everything in Aroma Inataller (Including Updated Modem)
then in First Boot my N7100 Freezed while i was entering my Wifi Pin First Device Setup
Waithed for more then 1/2 hour but still Freezed...
then i rebooted it with removing my N7100 Batteries
then again Boot and it Widened my eyes, my mouth was open, and i was Smilin...
My N7100 Bluetooth was turning ON, my USB is connecting to PC without any secret code for UART mode, my Phablets screen turned off, I waited for around half Hour and then i Pushed my Home Button and it respond and turned on the Screen.

Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.

aukhahaven said:
Firstly your very brave to do this or your too Rich to afford a new device if you brick it .
Now firstly Please dont make any changes to the existing Rom that you have downloaded seeing other Rom scripts ,
Now before flashing any rom go trough the OP to understand what OP has mentioned about flashing.
Dont Refer to Google refer to ROM OP OR THREAD any question you have post it there so you will get quick response.
Click to expand...
Click to collapse
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...

bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread

bullooka said:
Thanks...
But I'm confused, what should I do now...
And I don't have that much money to afford another device like this one...
Is there any fix or solution for this problem...
Click to expand...
Click to collapse
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.

aukhan said:
Download Stock ROM,
Flash it it Via Mobile Odin or PC ondin,
Once flash completes Boot into recovery and do a Factory Reset+User data ,this will wipe everything on your device memory .
and then tell which rom you want to flash ill guide on how to do it.
Click to expand...
Click to collapse
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.

bullooka said:
Okay.
I'll inform u when i'am ready...
In my place broadband or network is not that good, to download stock ROM it will take some time.
And thanks for helping me.
Click to expand...
Click to collapse
no problem any time

aukhan said:
no problem any t
Click to expand...
Click to collapse
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.

bullooka said:
Actually, I think I found out what exactly happened to my note 2.
The ROM I tried to flash was for s3 (MIUIv5 I9300 Note 2 Edition 3.6.21 by @muchopoli83)
This ROM was flashed after removing the two lines from updater script, the assert lines.
But after flashing my phone didn't started so I changed the ROM.
So, what should I do. Is stock ROM still important.
If yes can u please give me the link.
I found one with pit file in xda but that link is not working
And some guys with similar problems are talking that every stock ROMs are not working for problems like this.
Click to expand...
Click to collapse
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?

aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My device model is N7100,
and today I found out that my Bluetooth is also not working, I can't switch it on.

shhbz said:
Well since your phn is acting weird better flash stock rom via odin and see if the prob persist if all is fine then gv a fresh start flashing recovery and stuff and use philz recovery for flashing if it acts weird than just make the flash counter 0 and take it to service center for precise details go though ketan thread
Click to expand...
Click to collapse
Actually I accidentally flashed the wrong ROM . S3 I9300 ROM in my Note 2 N7100.
Is there any other ways to fix this

aukhan said:
You could be in serious trouble since youve flashed s3 Rom just keep your fingers crossed thinking that its not corrupted your EFS folder
what Model is your device N7100 or n7105 which 1 >?
Click to expand...
Click to collapse
My model is N7100.
Can you tell me what happened to my note2, efs damage or soft/hard bricked
And what should I do.
Please tell me.:crying:

Still got the problem
Still got the problem and cant find any solution
anybody any idea

Simply go to recovery wipe everything including format_system,
then choose any rom from N7100 development thread as your suitability .
and flash in recovery as per instructions given in OP
Then tell here what happened

looks like efs croupt no worries just flash stock rom from odin then root it with cf-root method
use triangle away to remove the flash counter and then reboot unroot from su app and ur good to go to service center
just tell them i updated this phone to latest from ota and it failed iam when it restarted there was no cellular

bullooka said:
Still got the problem and cant find any solution
anybody any idea
Click to expand...
Click to collapse
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.

I had the same problem few weeks ago. I also tried to flash alot of ROMs but same problem exist. found a solution to this problem yesterday this is what I did
1. Download leaked 4.3 it will take time because the file is 1.2gb
http://forum.xda-developers.com/showthread.php?t=2499794
2. After download flash it via Odin in pda. Make sure auto reboot and f.Reset time only have check.
3. If the flash fails, it's ok but make sure it already flashed the radio and modem.
4. Reboot again in download mode then flash Philz recovery
5. Reboot in recovery mode then flash slimbean rom or any rom you prefer.
6. Install gapps
7. Wipe cache and dalvik
8. Reboot and your ok now
I'm in slimrom build 2 now. Bluetooth is ok and no more reboot when phone sleeps after few seconds.
Hope this helps.
Sent from my GT-N7100 using xda app-developers app

taticuio said:
Do you have GSM network?
Flash Stock ROM via PC Odin v3.09 and use re-partition and Nand erase all with PIT file, Freset Autoreboot.
After flash complete everything must be ok.
Click to expand...
Click to collapse
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help

Still got the problem
Ok i'll try the leaked version and thanks for reply

bullooka said:
Got the GSM, WIFI is also OK but bluetooth,USB and reboot on sleep. but what re-partition and Nand erase work for and what is PIT file and where should i get it
any help
Click to expand...
Click to collapse
Never try to touch or else you'll get a big problem.
Sent from my GT-N7100 using xda app-developers app

[Q] CM 9.1 crashes continiously

Dear Community,
this is my first post on XDA-devloppers.
I ask you for help as y have a serious promlem with CM 9.1 on my xperia arc.
I flashed CM on my phone using the latest stable rom downloaded from the official cyanogenmod website (cm-9.1.0-anzu.zip)
Everything worked perfectly and i was delightet.
Unfortunately, after two days my phone crashed.
By crashed i mean that it first reacted very slow then froze. After this, the screen went black (backlight on) an then dark.
no button could get me back to lockscreen.
then suddenly the phone rebootet.
this happened every time about one minute after booting my phone.
As the problem didn't seem to get away i decided to reflash it:
wipe SD
delete davlik cache
reseting to factory
and then istalling the same rom and gapps from zip
everything worked fine again, but after one day i got the same problem again.
what can I do to fix this?
I would appreciate any kind of help
and excuse me if this isn't the right forum (search also, didn't help)
sincerly,
PraetorAce

You might want to try FXP's release:
http://forum.xda-developers.com/showthread.php?t=1356685
僕のLT18iから送られてきた

popthosegaskets said:
You might want to try FXP's release:
http://forum.xda-developers.com/showthread.php?t=1356685
僕のLT18iから送られてきた
Click to expand...
Click to collapse
thank you!
but which version should I take and how do I flash it? (just copy on SD and then install from zip?)

PraetorAce said:
thank you!
but which version should I take and how do I flash it? (just copy on SD and then install from zip?)
Click to expand...
Click to collapse
You can try the nightly versions if the stable doesn't work for you.
Take out the boot.img inside the ROM zip and flash with fastboot. Then put ROM zip onto SD card and flash with CWM.
僕のLT18iから送られてきた

I tried a few roms and it didn't work.
with the latest nightley version from cyanogenmod website gapps wans't installed properly and my home button didn't work.
and the roms I tried from the link you gave me abortet the installation.
i always flashed the kernel (boot.img) via flashtool and then used CWM to: 1 wipe davlic cache, 2 reset to factory and 3 install from zip
will it maybe work with odin (or is odin only for samsung devices?)
thnx

PraetorAce said:
I tried a few roms and it didn't work.
with the latest nightley version from cyanogenmod website gapps wans't installed properly and my home button didn't work.
and the roms I tried from the link you gave me abortet the installation.
i always flashed the kernel (boot.img) via flashtool and then used CWM to: 1 wipe davlic cache, 2 reset to factory and 3 install from zip
will it maybe work with odin (or is odin only for samsung devices?)
thnx
Click to expand...
Click to collapse
Odin is for Samsung devices only. If CM9.1 doesn't work for you then you might want to try CM10.
僕のLT18iから送られてきた

4.3 MI6 Roms not working on N7100

Hey guys=)
So yesterday i installed (after an EFS Backup) a 4.3 Custom Rom (JoelDroid) on my Galaxy NOte 2 N7100. It was on a rooted 4.1.2.
The rom booted everythign looked fine. I also wiped Data/factory resetted my device before i install the rom. But when i have to configure it the first time, it always crashed. So i made a full wipe and flashed the rom again (Philz touch btw the newst version). But the same thing again.
So i decided to flash a new ROM. Full reset, resetted caches and so on and the same problem again. My device boots up correctly but after 1minute or so it freezes completly. Cant press any buttons and so on.
The last try for me was to install a CM 10.2 (Asylum) version. This one is working properly. Had 1 or 2 crashes, but now its working fine.
But i dont want to lose the stock features.
Can anybody help me pls? What did i wrong? what do i have to do to get a proper functional MI6 4.3 rom on my N7100?
Thank you very much
Greets Marco

Have tried any other 4.3 rom? Steps u are following are absolutely correct btw..
If u using philz then u should choose the option "clean install befire a new rom" and manually format system,data,cahe and preload..this is a clean install.
Sent from my AweSoMe ?♥Note2♥?

Thanks for your reply!
Yes i used the option clean for New installation and i used 2 other 4.3 Roms too AS i mentioned. But at least i know now that my procedure was correct. Should i try another Rom? Or should i flash back to stock 4.2.2 (if its possible) via Odin?
Sent from my GT-N7100 using xda app-developers app

ok it looks like that the Asylum CM 10.2 is also not working. Crashes after some time too (every 1-2 hours) :/ really need help guys!
EDIT:
Ok i installed Stock 4.1.2 ROM via ODIN and now everything's working fine again. I think i will stick to this for some time now (have a prerooted version so root still there)

‎

Samsung Galaxy Note 4 Inaccurate Touchscreen, Can't Flash ROMs

touch screen bugging out
Ok so my phone for some reason can't click on the exact location i seem to want to press
idk i was trying to flash the silly roms you guys have around here. for stock galaxy note 4 spr
i've been flashing for a while
and it seems none of them work anymore
i use the latest TWRP even used the other one CWM or something like that
i used odin even up to .10 from 1.85 even lower and still can't
even when i install (seems to be the only rom i can cm12)
the locations i press on my screen are buged out. so i have to press higher than i should to even get a click and its hard to text or anything.
i did factory resets, cashe wipes. deleted partitions.. what am i doing wrong ??
why can't this annoying this go away what am i missing guys ???
and why is it only 1 rom can flash on my phone ?? and i can't go back to any lollipop or anything ??
(i also tried flashing a superSU from the tWRP .. when i used CM 12 and it all successed but still
i have this thing where i can't click anywhere im on my phone directly i have to try and feel it out.. please help

1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom

Not long ago, it was discovered flashing the wrong recovery will mess up the lock-screen.
Some were solved with KIES firmware restore; no root, straight to dialer type *#2663# and then TSP FW update. If KIES won't update it, power down, pull battery 30 seconds, Odin stock tar and boot then the dialer code and update.
Do that after you determine which stock tar or KIES update is recommended from Your response above.
Sent from my SM-N910P using Tapatalk

schlepprock said:
1)what software version are you on now?
2)what rom are you trying to flash?
Note4 Rocking a Hybrid Rom
Click to expand...
Click to collapse
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD

it seems this has been a common issue the word we are looking for is calibration issues
it seems it happens to this person exactly how it is happening to me
there was a solution at the bottom but those buttons do not work for galaxy note 4 spr
does anyone know the codes for doing so ?
source:
http://forum.xda-developers.com/note-4-tmobile/help/touch-screen-issues-root-t2986883

Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk

NatsarYAhu said:
I am using
Cyanogenmod version
12.1-20150814-nightly-trltespr 5.1.1
kernel 3.10.40-gef59855
baseversion
N910PVPU4COG5
GALAXY NOTE 4 SPRINT
How ever im trying to flash back to stock evrything.
so that i can flash a rom that uses stock fetures of note 4 (windows mode etc)
the cm 12 does not utilize these and i need those badly.
so i tried to go back even factory reset wipe all cashes
but some reasn during all those fails my system UI says fail. and my touchscreen is not in sync correctly.
i heard of wiping system cache not sure if i done that but with TWRP i wipe everything but SD
Click to expand...
Click to collapse
I recommend you flash this rom. Mostly stock but very stable,and the developer is working on some goodies.
http://forum.xda-developers.com/showthread.php?p=62336588
I recommend that you back up everything you want to keep because you need to wipe everything EXCEPT external SD card. Wipe cache, dalvik , system, and data three times. Then factory reset three times and then flash this rom.
Note4 Rocking a Hybrid Rom

samep said:
Did you see post 3?
I suspect you need to flash OG5 first. Use KIES or Odin. I would suggest wiping all but ExtSdCard and factory reset or format data partition, then power off; pull battery 30 seconds prior to stock tar or KIES recovery.
There's a guide you can follow as well as the OP in this post/thread. But see the steps on post 3, this thread. Boot into stock right after stock flash to try to recover your touch screen. If your touch screen is OK, then follow the guide below to root stock.
http://forum.xda-developers.com/showthread.php?p=62241991
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Ok so this stock actually went through will get with you shortly to let you know if sync is fixed,
edit: still not synced correctly but phone does finally work how i want just the main problem is bugged trying the link with *#2663# now
Edit: IT WORKED !!! big UPS BRO thank you !!!

i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks

imeicodes said:
i have same problem after install twrp and flash custom firmware phone working fine but touch won't work
i tried that *#2663# but not working on custom rom any solution to solve touch problem on custom firmware
thanks
Click to expand...
Click to collapse
Odin stock tar and try again.
There's also an update to CFAR (Chainfire auto root) for Note 4. After you fix your touchscreen, root with it and make a TWRP backup once that is installed. A TWRP restore plus full un-root in SuperSU may make OTA possible; CFAR backs up stock recovery.
You can use Flashify to install custom recovery. You may have installed the wrong recovery to have the touch screen out of cal like it is.
Sent from my SM-N910P using Tapatalk

problem with all android 6 roms in recent apps menu

hi,
all android 6 in my note 2 n7100 have recent apps lag
(when i want to swipe up and down it goes left and right its so hard to get it up and down its not right)
other users dosen't have that why ?
in stock and android 5 roms my recent apps menu is ok
so why is that what is different in my phone ?!

You didn't flash something corectly, try different ROM for example.

Option58 said:
You didn't flash something corectly, try different ROM for example.
Click to expand...
Click to collapse
any android 6 rom have this problem
i install rom this way :
my stock rom is : N7100XXUFND4_N7100OJVFND3_XSG
(my phone hade android 4.3 and i upgrade it to above rom with odin)
i use odin to flash twrp-3.0.2-0-t03g.img
then in twrp i go to advance wipe then remove everything
then copy rom to phone then install rom then install gapps pico then wipe cache and dalvik and reboot
- i never install a kernel or anything else
so what i am doing wrong ?

stop2000 said:
any android 6 rom have this problem
i install rom this way :
my stock rom is : N7100XXUFND4_N7100OJVFND3_XSG
(my phone hade android 4.3 and i upgrade it to above rom with odin)
i use odin to flash twrp-3.0.2-0-t03g.img
then in twrp i go to advance wipe then remove everything
then copy rom to phone then install rom then install gapps pico then wipe cache and dalvik and reboot
- i never install a kernel or anything else
so what i am doing wrong ?
Click to expand...
Click to collapse
Try to flash official Samsung KitKat first.

Option58 said:
Try to flash official Samsung KitKat first.
Click to expand...
Click to collapse
With odin ?
I did that too but still no...
Sent from my GT-N7100 using Tapatalk

How can I full flash official rom ? Is there anythig else I can do ? To make my phone like you guys ?!
Sent from my GT-N7100 using Tapatalk