Hi guys I open another thread for case. My G3 is gold edition, so I want ultra thin gold or transparent case. I don't want the case to made the phone larger or heavier like Circle case. Thank you for your advices.
I have a red shield brand case. The clear one is a little frosted but the transparency is great. It's really thin but has a great grip to it.
G3
Pipp0o said:
Hi guys I open another thread for case. My G3 is gold edition, so I want ultra thin gold or transparent case. I don't want the case to made the phone larger or heavier like Circle case. Thank you for your advices.
Click to expand...
Click to collapse
I understood the Quickcircle case version that replaces the back cover does not add that much bulk.
Ringke max
Just perfect
sent via best phone LG G3
Related
Hey guys,
Got my hands on the new SGP Neo Hybrid EX, a variant of the original Neo Hybrid. It is a much simpler case, they've removed the back silicone and turned it into a bumper that wraps around your phone. Really pleased with the case, looks great and feels nice. You can check out the full review below:
imo, this one is built if you're using those extended batt packs. the original neo hybrid is still better at least the back is protected with the original one
I like this hope to use with extended battery 2000 mAh.
RUKI said:
I like this hope to use with extended battery 2000 mAh.
Click to expand...
Click to collapse
Same here looks perfect for the job
diablous said:
Same here looks perfect for the job
Click to expand...
Click to collapse
For sure - would probably look great with it!
this is sexy
Sent from my HTC Sensation Z710e using xda premium
keep it up mate case is looking good
Thanks for the great reviews. This looks like another winner for SGP.
I like the fact that you showed you could actually use an extended battery with this bumper.
paulavetta said:
Thanks for the great reviews. This looks like another winner for SGP.
I like the fact that you showed you could actually use an extended battery with this bumper.
Click to expand...
Click to collapse
You're welcome! I thought, since the back was left fully exposed, it should have allowed battery covers to work just fine, and it did
thanks for another nice review. I wish we could order a bumper without the hole for korean version... I dont need that hole, i want a bumper that fully cover the side
Whats your top choice for protection wtih mugen 3200maH battery? At the moment im using Glas screen with Taurus bumper, but I need to chance it.
IIIPowerIII said:
thanks for another nice review. I wish we could order a bumper without the hole for korean version... I dont need that hole, i want a bumper that fully cover the side
Whats your top choice for protection wtih mugen 3200maH battery? At the moment im using Glas screen with Taurus bumper, but I need to chance it.
Click to expand...
Click to collapse
Glas screen shield for sure - as for the bumpers, this is a good option (although a bit pricey), the Walnutt bumper looks nice as well but I have not tried it.
Most will do the same job, it is just the looks/design that change.
Hope I helped
Ploone said:
Glas screen shield for sure - as for the bumpers, this is a good option (although a bit pricey), the Walnutt bumper looks nice as well but I have not tried it.
Most will do the same job, it is just the looks/design that change.
Hope I helped
Click to expand...
Click to collapse
Thanks for the answer.
A SGP EX without korean hole would be nice, it would make the top right corner last longer, it wouldnt *break*
Hey there,
I'm looking for a new case for my Nexus to get some more variety in cases
So I found the Ultra Hybrid but I dont like how the sides of it look..
Is there a case that combines the sleek and simple looking sides of the Spigen Neo Hybrid with the transparent back of the Ultra Hybrid?
Also I need a little of free space between the phone and the transparent back (around 1mm) to add a "The Division" badge that someone gave me on gamescom...
So what alternatives would you recommend? I also use a glass-screen protector...so It should be compatible with it
Thanks in advance and sorry for my terrible english :crying:
Best regards,
Korn
Ringke Fusion is the best looking case I have right now. I got the grey color. If it becomes extremely unpleasant to look at due to wear and tear I'll buy another one.
I also have a tempered glass installed (Nillkin) and it's perfectly aligned with the case.
Thanks
I had a closer look at the Spigen Ultra Hybrid and it does not seem to fit the 1mm badge I want to add
As you own the Fusion, any Idea if this would fit?
Regards,
Korn
B29Korn said:
I had a closer look at the Spigen Ultra Hybrid and it does not seem to fit the 1mm badge I want to add
As you own the Fusion, any Idea if this would fit?
Click to expand...
Click to collapse
You mean you'll place it inside the case so it covers the nexus logo?
Yup thats what im trying to do
But I feel like It wont work out..
I may will stick with a bumper case and modify it to feature a transparent back then
Or do you think it might work?
Official Smoke Case
by OnePlus
Official Flip Case
by OnePlus
Official Clear Case
by OnePlus
InvisiCase
by Orzly
ExecArmour
by Orzly
Wallet Case
by Orzly
FlexiCase
by Orzly
FlexiSlim
by Orzly
FlexiCase Blue
by Orzly
Fusion Bumper
by Orzly
Lucion
by Tudia
Arch
by Tudia
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
I sent them an email with the same photo's, they are refunding my money. Pretty stand up.
Now I need to find a bumper.
Here you go!
I ordered orzly fusion bumper case, its on the way.
Sent from my ONE A2003 using Tapatalk
ghettopops said:
I picked up the Ringke Fusion Clear case off Amazon. I am very disappointed by the whole thing. It does not fit the 1+2 in almost every detail. The case does not extend beyond the screen so if placed face down the screen will touch table or counters surface. I tried to show pictures off the main misalignments.
Click to expand...
Click to collapse
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Space saver
Waterdroid said:
Jeez, that's pretty bad. I had always thought Rinke was on point with its precision and stuff, thanks for posting!
Click to expand...
Click to collapse
DustinDep said:
Thats a shame! I just got in the Orzly fusions and they fit way better than that
Click to expand...
Click to collapse
Last I looked didn't that case take like 3+ weeks for delivery?
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Mersine said:
I just got my OP2 and my accessories at the same time now! I have the Dual Layer Defender Protective Case Cover with Kickstand and damn it's bulky and hard to hold in my hand. I had a MI3 and OPO naked before (broke both phones and now I've learned my lesson) but I've been stuck with a 5C for a week. Hopefully I get used to the size and heft again of a 5.5", though this is the heaviest phone of all...
http://www.amazon.com/gp/product/B00YM3WQ12?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00'
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Why don't you look at tudia or better otterbox
Sent from my SM-G900H using XDA Free mobile app
I returned the Dual Layer Defender Protective Case Cover with Kickstand because it's too bulky and really like the One Plus's translucent gray case
Mersine said:
I get One Plus's translucent gray case tomorrow.
https://oneplus.net/oneplus-2-translucent-gray-case
Click to expand...
Click to collapse
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
cedric1918 said:
Many reviews of the gray case put it over stylecover but webstie says "Please note that to use this case you will need to remove the device's StyleSwap Cover as it is designed to snugly contour the OnePlus 2 without adding extra bulk." could you put picture with this case as recommended by one plus ? I am interested in i=this one
Click to expand...
Click to collapse
I've attached pictures of my phone and the case with my stock back cover and without (you can see my serial). It is very weird without. I can definitely feel the back as hollow and missing something. I'd advise to keep it on, it is as slim as can be. That's odd the website would say that if it fits without the back cover on.
I bought the Diztronic tpu case because I had it for the OnePlus and was very satisfied. Although it is roughly the same case as for the opo the finishing is not as good. There is a shiny edge where the camera is, which could have worked out great but just is not. The case is also not as tight as for the opo and corners will slip off the phone when getting it out of your pocket. On the other hand the case is still from a very durable shock absorbing material and the edge that stands out over the screen makes sure that the glass doesn't shatter when you drop it. The thing I like about it most is the fact that it simply makes the OnePlus look more humble. No thrills just a nice phone. All and all a good case but not as good as its predecessor.
im not happy with this at all..i have the black apricot..it is quite a bit thicker than the sandstone..im very disappointed in oneplus to sell styleswaps with different thicknesses..
I have both the orzly invisicase and fusion bumper..
with the invisicase..it loses the facedown protection..the screen comes out on top of the edges..because its too tight..the corners/edges will slipp off with a small touch..
with the fusion bumper..you clearly see it doesnt fit the contours of the device..especially at the cutouts and the top&bottom..
also the cutout for the usb port is too small for the standard oneplus cable (have to use some force) ..while its cut perfectly for the usb cables orzly is selling..
basically..these cases are only designed to use with the standard sandstone styleswap while intended for the other styleswaps..
Has anyone got the spigen rugged case?
rosswaa said:
Has anyone got the spigen rugged case?
Click to expand...
Click to collapse
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Talesofanobody said:
I also want to know this...
Sent from my ONE A2005 using XDA Free mobile app
Click to expand...
Click to collapse
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
rosswaa said:
I've just ordered it, so if no one else does I'll get a mini review type thing when it arrives sorted
Click to expand...
Click to collapse
Alright, thanks
Sent from my ONEPLUS A2005
I have this phone and I just recently bought dbrand skin, but would like a bumper case with no back on it. Meaning just the outside edges only. Anyone know of where there could be one?
I'm also looking for one... subscribing. I had one on my HTC 10 that I really liked (RhinoShield CrashGuard) - but they don't seem to make them for LG phones. Looking for something similar to that. Please update if you find one!
Im trying to find one too if not i might order a really flexible cristal clear case and put it on or maybe order one of the "bumper" cases that have a tranparent back and just cut the back
looking for it as well, no result till now
I have this one and love it. Could easily be cut with a sharp razor to be a bumper case with possibly leaving the back wire frame on it. Look at this on eBay http://www.ebay.com/itm/371888746421
lg3FTW said:
I have this one and love it. Could easily be cut with a sharp razor to be a bumper case with possibly leaving the back wire frame on it. Look at this on eBay http://www.ebay.com/itm/371888746421
Click to expand...
Click to collapse
I doubt the thin blue frame would be that secure without the case? I could be wrong. If anyone finds one update this thread, they can have my money in a heartbeat.
Hi guys
I've just found and ordered a bumper for our lg g6
https://www.macoque.com/lg-g6/11089...et-dos-brosse-amovibles.html#/couleur-argente
monkeydrufy said:
Hi guys
I've just found and ordered a bumper for our lg g6
https://www.macoque.com/lg-g6/11089...et-dos-brosse-amovibles.html#/couleur-argente
Click to expand...
Click to collapse
I'm not a fan of the clasp closing one's and I'd prefer a more robust silicone with a big lip but as it's all we have I may give it a go. Have you ordered one?
yep, ordered 2 differents colors
Please let us know with a few details on what they're like once you've received them, Monkeydrufy.
I've had that type of case on my honor 8 (the last one posted in silver and black).
It was terrible. Not a real bumper, and it's so deep I could hardly get my finger in the hole to unlock it.
Maybe this version will be better, I'm not sure, I haven't used it, but I certainly would not recommend it.
I would love to see a RhinoShield bumper even on G6, sadly they only make them for galaxy and iphone..
the_rooter said:
I have this phone and I just recently bought dbrand skin, but would like a bumper case with no back on it. Meaning just the outside edges only. Anyone know of where there could be one?
Click to expand...
Click to collapse
I actually found one with a back that feels and looks HELLA AMAZING, I also was looking for one with no back line the rhino sheild but I would easily give up the open back for the this case ( I-Balson bumper case for lg g6)
I'm also looking but can't find one even on aliexpress.
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Thanks for sharing photos of your plastic case with us.
Which one is the best leather case for the U11+ ?
lebigmac said:
Thanks for sharing photos of your plastic case with us.
Which one is the best leather case for the U11+ ?
Click to expand...
Click to collapse
I'm after leather case as well and this is what I found so far https://www.ebay.com.au/itm/For-HTC...se-/391927659984?_trksid=p2385738.m2548.l4275
sephstyler said:
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Click to expand...
Click to collapse
Hi just wondering is there any rainbow or watermark effect on the back where the case touches the back glass? Does the case have a micro dot pattern inside?
Got the incipio case, no rainbow effect on the back, there is a dot pattern to prevent that, also cut outs are very precise. I tried a couple of transparent flexible cases, this is the best one so far...
sephstyler said:
Hey guys,
sharing this.
Ordered a case from Incipio. Not sure if the clear or smoke was the better choice, but ended up getting the smoke:
https://www.incipio.com/cases/smart...11-plus-cases/ngp-pure-htc-u11-plus-case.html
Its marked down today too if you guys want to grab
https://photos.app.goo.gl/OZ1OADdMacbDAjap1
https://photos.app.goo.gl/HGlnH2YUHRPpbk0g1
https://photos.app.goo.gl/sgOojfvPwuJtjuGs1
Click to expand...
Click to collapse
Is there transparent silicone case because I want to show off the back of my Translucent Black .
Are the edges of your case slightly higher than screen to prevent display?
I ordered this one.
https://www.amazon.com/Love-Ying-Anti-Scratches-Protective-Plus-Clear/dp/B076M5WWPR
does edge sense still work with this case?
YorbenB said:
does edge sense still work with this case?
Click to expand...
Click to collapse
Yes it does.
However I do feel like you might have to squeeze a little harder than normal, but then again that's what being able to adjust the sensitivity is for