Related
Hello Everyone, as in the subject, my touch isn't working, so i need to ship my phone(under warranty) to the technical center,
so, I wanted to relock the bootloader and use a ruu .
Here it's my problem, i tryed many many method, but i cannot use the latest available ruu (3.14.x) since i installed before the originale stock 3.18.x rom.
The ruu. exe give me every times the error 140, even if i try after rewriting boot.img, signed_recovery.img and so on.
I tryed many things, but i cannot do it, so here my questions:
1) Someone already have the right working solution?
2) i thought to flash a stock rom based on 3.14.401.31 and retry to use the ruu, so can someone give me a link to download a "old" rom like that?
3) other suggests?
Thank you very very much in advance for your help!
Kashanir said:
Hello Everyone, as in the subject, my touch isn't working, so i need to ship my phone(under warranty) to the technical center,
so, I wanted to relock the bootloader and use a ruu .
Here it's my problem, i tryed many many method, but i cannot use the latest available ruu (3.14.x) since i installed before the originale stock 3.18.x rom.
The ruu. exe give me every times the error 140, even if i try after rewriting boot.img, signed_recovery.img and so on.
I tryed many things, but i cannot do it, so here my questions:
1) Someone already have the right working solution?
2) i thought to flash a stock rom based on 3.14.401.31 and retry to use the ruu, so can someone give me a link to download a "old" rom like that?
3) other suggests?
Thank you very very much in advance for your help!
Click to expand...
Click to collapse
Flash a custom recovery and then flash a stock 3.18 nandroid inc boot image that matches your cid. Once the nandroid has been flashed, flash the stock recovery and relock the bootloader. Perform a factory reset to remove the previous users data. You should then be able to send the phone back to HTC
Hope it helps
ghori1989 said:
Flash a custom recovery and then flash a stock 3.18 nandroid inc boot image that matches your cid. Once the nandroid has been flashed, flash the stock recovery and relock the bootloader. Perform a factory reset to remove the previous users data. You should then be able to send the phone back to HTC
Hope it helps
Click to expand...
Click to collapse
first of all thank you for your reply,
I already try to restore a 3.18 nandroid, downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1975140 (cid 032)
I restore it by trwp, but i was some problem, the touch doesn't work, after check and recheck i thought that the problem was in boot.img, so i try to download the 3.14 boot.img and i flash it, but i had same result, i tryed with others and every times i have a different problem, the last, i have no gsm signal and it looks like the phone had no imei.
Maybe i just need a correct boot.img, but i still didn't find it
do you think i'm right?
Kashanir said:
first of all thank you for your reply,
I already try to restore a 3.18 nandroid, downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1975140 (cid 032)
I restore it by trwp, but i was some problem, the touch doesn't work, after check and recheck i thought that the problem was in boot.img, so i try to download the 3.14 boot.img and i flash it, but i had same result, i tryed with others and every times i have a different problem, the last, i have no gsm signal and it looks like the phone had no imei.
Maybe i just need a correct boot.img, but i still didn't find it
do you think i'm right?
Click to expand...
Click to collapse
I would flash the firmwire zip again.
Here is the link http://forum.xda-developers.com/showpost.php?p=38781030&postcount=29
It contains the new touch image, stock recovery, boot image etc
If that does not help you could flash a stock rom created by Mike1986 using trwp or cwm. Flash the stock recovery and then lock the bootloader.
http://forum.xda-developers.com/showthread.php?t=1546970
ghori1989 said:
I would flash the firmwire zip again.
Here is the link http://forum.xda-developers.com/showpost.php?p=38781030&postcount=29
It contains the new touch image, stock recovery, boot image etc
If that does not help you could flash a stock rom created by Mike1986 using trwp or cwm. Flash the stock recovery and then lock the bootloader.
http://forum.xda-developers.com/showthread.php?t=1546970
Click to expand...
Click to collapse
Ok, the first suggest didin't work, but with the second suggest i flash the stock rom (odexed version) i flash the recovery, i lock the bootloader.
Now it looks ok!
I hope this topic could be useful to someone else: the only way (at least in my case) to have a stock rom if in the phone was a 3.18 version, is to upgrade to that 3.19....i don't know why, but...that's it!
Kashanir said:
Ok, the first suggest didin't work, but with the second suggest i flash the stock rom (odexed version) i flash the recovery, i lock the bootloader.
Now it looks ok!
I hope this topic could be useful to someone else: the only way (at least in my case) to have a stock rom if in the phone was a 3.18 version, is to upgrade to that 3.19....i don't know why, but...that's it!
Click to expand...
Click to collapse
Thats good to know that you got it back to stock. You should be able to send it back to be repaired.
And if you have trouble with TWRP touch(and you will because of flashing new firmware in stock JB OTA) you need to use TWRP 2.4.0.0 from main TWRP page but only TWRP 2.4.0.0 with JB string at the end, or TWRP 2.5.0.0 repacked also to work with JB from here:http://forum.xda-developers.com/showpost.php?p=40120901&postcount=509, and because of upgrade to JB firmware in this versions of TWRP you have touch but no mont usb storage and adb working in recovery, i think that new CWM 6.0.3.0 have adb support and mount usb storage but no touch..
Hey all,
I have an AT&T One X, CID HTC_621, Main version 2.20.502.7, hboot 1.14.0002, S-On I have unlocked my bootloader and rooted my phone. I installed TWRP recovery, and made a nandroid backup of the stock rom. I then tried to flash Android Revolution. This did not flash, it hung at 30% on the installer. I have tried EVERYTHING I can think of, read every post I can find, and spent over 20 hours trying to recover this phone. I can't flash an OTA, the stock recovery, or get an RUU.exe to work. I can boot into TWRP recovery, flash Clockworkmod recovery if I want, boot to bootloader, I just can't get any ROM to install, either via fastboot or recovery. I get various errors. Is there an ruu I can flash to restore everything to factory? Please help !!
Thanks.
Wrong forum, go to the HTC one XL forum. Don't flash anything from here, you cause a severe brick !
Thanks. I should pay better attention.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
We all make mistakes
Hey guys, first post here and I couldn't find a good thread title. Hope that's not a problem
Anyways I need a little help with my m8, because I don't know what else to do.
I'll start from the beginning:
It's a One m8, bought from O2 Germany a few months ago. There were no O2 apps installed as I bought it, though.
I unlocked the bootloader, rooted the phone, flashed the TWRP recovery and the Venom m8 ROM. It was S-On over the whole time. Tried to make it S-OFF with the help of firewater but it didn't worked, so I didn't tried it anymore.
I just wanted to flash the newest Venom ROM, but to do so, I had to flash the newest firmware (Kitkat 4.4, have 4.2 right now)
So I relocked the bootloader, because that's what people on the internet said you have to do, to flash the newest stock firmware. After that I wanted to go back to Venom m8.
After relocking the bootloader, I rebooted the phone, and now I'm stuck in there. But in the fastboot mode.
Tried to enter the recovery -> can't access it
Tried to make a factory reset -> didn't worked
Everytime klick on recovery or factory reset, the phone reboots and comes back into fastboot.
Normaly you boot into hboot I think.
At the top of the screen stands:
***TAMPERED***
***RELOCKED***
***Security Warning***
I've seen the first two the whole time, but the third one is new :/
Here are the things I tried until now:
Flashing a stock ROM (it was a OTA_m8_O2___102...) I could try to find the actual link, if that helps.
Flashing a custom recovery (tried TWRP, after that CWM) Yea I already have custom recovery, but I tought it might help somehow.
Erased fastboot cache
None of these things worked. Fastboot is the only thing that works.
So my question now is, if anyone of you guys got any other idea how to solve that problem?
I really would appreciate any help.
If you need some more informations about the phone, just let me know. I guess there's missing some important informations
Sorry for the long text and if I misspelled something
EDIT: I just remembered that the flashing of TWRP or CWM didn't worked. It said FAILED: signature verify fail
Flashing of the Stock ROM worked I guess. There was the silver HTC logo on the phone. Then I flashed it in fastboot mode.
I tried to find this RUU software, but I couldn't find it :/
And "adb" in cmd also not working. It says "device not found"
Have you tried unlocking it again ?
Sent from my HTC One_M8 using XDA Free mobile app
---------- Post added at 12:10 AM ---------- Previous post was at 12:08 AM ----------
Oh, and what are your CID / MID / bootloader version / firmware version / etc. ?
Sent from my HTC One_M8 using XDA Free mobile app
You're bootloader needs to be unlocked, not re-locked. Go to HTC Dev to unlock in again, just like the first time. Then you can flash a recovery.
Like said above, phone HAS to have unlocked bootloader to flash custom ROMs and recovery(which is why you're getting FAILED: signature verify fail). Can't flash custom recovery/ROMs with a locked bootloader.
Go to HTCDev.com and unlock the bootloader like before, then head over to the collection of stock backups thread(in general section) download a nandroid backup for your device and restore it. After that you can flash back the stock recovery(also in the collection thread) and just do the OTA updates until you get to 4.4.4 to use the latest ViperROM.
SunShine don't work with a modifyed custom Rom like ViperS. I flashed ARHD (or stock Rom) and got S-Off with SunShine.
Firewater don't work at all anymore so you have to use SunShine and pay the 25$ it cost.
3fiddy said:
Hey guys, first post here and I couldn't find a good thread title. Hope that's not a problem
Click to expand...
Click to collapse
Its not a bad one. At least better than many thread titles that say things like "Need help". Which of course is obvious, since its a Q&A, help forum! At least you tried to classify your issue!
Although the question of whether its a "soft brick" is not a critical one. IMO the term "soft brick" really doesn't mean anything. It simply means the user just got himself into a jam and doesn't know how to recover. And recovering is usually just a matter of knowing the right simple steps. More important to whether its a "soft brick", is whether the phone is truly bricked or not. And as long as the screen comes on, this phone is virtually never bricked.
RUUs don't exist for Euro versions (only the US versions, as far as I know).
The bootloader needs to be UNLOCKED to flash anything. Either just use the previous unlock bin code and fastboot command, or go through HTCDev.com unlock process again (as previously suggested). Then flash custom recovery, and flash a custom ROM or restore a stock nandroid.
Hey guys, sorry for the late response.
I did what you all said and unlocked the bootloader again. And that was it.
After unlocking it everything works normal.
You guys are the best, I knew this is the right place to come
Even the Venom ROM is on the phone. Everything else is gone, but the ROM is there.
Alright but I still would like to get the newest firmware for the phone. Could you guys give me a little help with this?
What do I have to do first?
I read a lot about how to do this. But as you can see something still went wrong :/
On the phone is currently Android 4.4.2 and ViperOneM8 1.7.0
First thing I have to do is, to grab a Nandroid Backup with the stock ROM, right?
I did this before, but then I read somewhere that the bootloader has to be locked, or relocked to update the newest stock ROM/ the newest firmware.
So if anyone knows how to do this correctly, please let me know.
Also when I flashed the nandroid backup (my own backup from before I flashed venom) I tried to update the firmware, but it wanted to update the latest Venom update.
Is this considered as normal?
Bootloader version (Hboot) is 3.16.0.0... At least I think this is the right one.
@jkolner: Didn't know that firewater doesn't work anymore. How long is this?
@redpoint73: Thanks for the heads-up Also I didn't know that there are no RUUs for the european versions. Good to know that now.
Thank you all for your answers
EDIT: I just tried to enter the recovery and it worked as well.
Oh and when I wrote above that I flashed the stock nandroid backup and the phone wanted to update the latest venom update, I think it was because the rom was still the Venom Rom, right?
Sure it was a nanroid backup, but the ROM was not the stock ROM? Or am I mix-up something there?
3fiddy said:
Alright but I still would like to get the newest firmware for the phone.
I read somewhere that the bootloader has to be locked, or relocked to update the newest stock ROM/ the newest firmware.
Click to expand...
Click to collapse
It sounds like you are trying to return to stock, and install official OTA to update firmware. In that case, unlocked bootloader is OK for OTA (no need to relock). But you need stock ROM and stock recovery.
3fiddy said:
Also when I flashed the nandroid backup (my own backup from before I flashed venom) I tried to update the firmware, but it wanted to update the latest Venom update.
Is this considered as normal?
Oh and when I wrote above that I flashed the stock nandroid backup and the phone wanted to update the latest venom update, I think it was because the rom was still the Venom Rom, right?
Sure it was a nanroid backup, but the ROM was not the stock ROM? Or am I mix-up something there?
Click to expand...
Click to collapse
You are mixing something up. The point of restoring a stock nandroid, is to return to the stock ROM. It sounds like your nandroid is made while on Viper ROM, not stock ROM. Either that, or the nandroid just didn't restore the ROM properly. Make sure "system" is checked on partitions to restore in recovery.
3fiddy said:
Bootloader version (Hboot) is 3.16.0.0... At least I think this is the right one.
Didn't know that firewater doesn't work anymore. How long is this?
Click to expand...
Click to collapse
Its been that way for months now. But your hboot version is old; so firewater might work, might not. Worth a few tries; as firewater is free and doesn't take long. If it still fails, you need to use sunshine to s-off.
redpoint73 said:
It sounds like you are trying to return to stock, and install official OTA to update firmware. In that case, unlocked bootloader is OK for OTA (no need to relock). But you need stock ROM and stock recovery.
Click to expand...
Click to collapse
Exactly this. Alright, then I read something wrong. I thought to flash the stock ROM you have to have a relocked bootloader.
I'll search a stock ROM and recovery. Hoperfully it will work.
redpoint73 said:
You are mixing something up. The point of restoring a stock nandroid, is to return to the stock ROM. It sounds like your nandroid is made while on Viper ROM, not stock ROM. Either that, or the nandroid just didn't restore the ROM properly. Make sure "system" is checked on partitions to restore in recovery.
Click to expand...
Click to collapse
This could be it. I don't know if there was already the Venom ROM in use. Could be.
redpoint73 said:
Its been that way for months now. But your hboot version is old; so firewater might work, might not. Worth a few tries; as firewater is free and doesn't take long. If it still fails, you need to use sunshine to s-off.
Click to expand...
Click to collapse
Okay I'll try it with firewater again.
Thanks for your help
EDIT: After I flashed the Nadroid Backup, do I have to wipe something, like Dalvik or anything?
3fiddy said:
EDIT: After I flashed the Nadroid Backup, do I have to wipe something, like Dalvik or anything?
Click to expand...
Click to collapse
I wipe Dalvik and cache when I flash anything.
Recovery will wipe system as it flashed the ROM. No need to do so manually.
If restoring a nandroid without data partition backed up, you may or may not have to wipe user data. It might not play well with the restored ROM, but it depends on what ROM you are coming from. If error occur, wipe data and restore again.
If you are restoring a nandroid with data partition backup, it will be wiped during restore. No need to do so manually.
Alright I flashed my own stock nandroid backup. Guess I just read something wrong because I thought it will get the latest Venom Update.
Then I downloaded and installed the latest updates. Now the phone has finally Android 4.4.
After everything went good, I flashed the twrp recovery, made a Backup, rooted the phone, did another backup and flashed the latest Venom ROM.
Before flashing something I wiped everything, like you said.
All is good now.
I think now I can totally forget to gain S-OFF with firewater. But I'll save the link to sunshine. Maybe I'll give it a try
Thanks again everyone, couldn't have done it without your help
I originally had a stock sense M8 (bought it first day) but since October, I changed my phone to GPE (GPE Firmware and everything) and have been using 5.0 eversince using SkyDragon rom. Ran into issues a few weeks ago, and i've been waiting hard to go back to sense and use the newer 5.0 sense version.
However, today I ran into multiple issues, I thought installing the latest Sense Lollipop firmware and installing the latest ARHD 5.0 rom would do the trick, sadly that did not work.
I flashed the latest sense firmware and the ROM only for it to boot saying my Data is corrupt and i have to reset my phone, i say okay(was going to do that anyway) but then I access my recovery (TWRP) and my Internal storage/Cache/Data will not mount. I tried going back to GPE (atleast so my phone would work) but I cant do that either because even with the GPE firmware, the data partition wont mount and my internal storage shows 0 MB in TWRP, now im just stick in a bootloop/bricked device for hours. Any help would really be appreciated...thanks a lot.
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
redpoint73 said:
Dev Edition RUU is what I would recommend. Partitioning is different on GPE versus Sense. So I'm guessing running the firmware only, since its not a complete image, did not change the partitioning back to the Sense partition scheme.
Converting from GPE back to Sense is not trivial, and not to be taken lightly. It seems like you tried to make up your own process instead of following any definitive guide or advice, which I do not recommend.
Click to expand...
Click to collapse
Thanks for your reply, to get this clear:
I should flash the Dev Edition RUU from (http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777) (3.28.1540.5) and then update the firmware to 4.16.1540.8 by just flashing that separate zip. However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery(Im terribly sorry if this sounds dumb, but my phone is soft bricked and I really need to get everything right this time), Is that the case if I flash the dev edition RUU? Thanks again.
Austin3161337 said:
However, if I flash the RUU wouldn't it relock my bootloader and put me on S-On and lose root and the custom recovery
Click to expand...
Click to collapse
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
redpoint73 said:
No, RUU will not relock the bootloader. The only way the bootloader gets locked/unlocked is if you do so yourself.
Same with s-off, there is nothing that can change that aside from you making it s-on yourself.
Yes, you will lose custom recovery, as RUU will install stock recovery. So just flash stock recovery by fastboot after RUU. Then flash the ROM you want, which should already be rooted (so losing root is a moot point).
Official firmware.zip will also write stock recovery. So doing so would have caused the loss of TWRP anyway (unless it was a user modified firmware zip).
Click to expand...
Click to collapse
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all, is there anyway I can install the RUU by not really needing to connect the phone to the computer? (Put the file in the external SD and install it via the bootloader maybe?) Any tips on that? Thanks
Austin3161337 said:
So I downloaded the RUU from (http://www.htc.com/us/support/htc-one-m8/news/) but its an .exe which requires me to plug my phone in which my computer cannot recognize because the phone won't boot at all
Click to expand...
Click to collapse
The phone doesn't need to boot into OS to run the RUU. It just needs to be able to get into bootloader/fastboot mode, which it can if the screen comes on.
If the device doesn't show on your PC, its a different issue. USB connectivity issue is almost always a driver issue. Install HTC Sync and HTC drivers, if you haven't already. Or uninstall and install them again.
I have a similiar issue. I had a tombile ruu.zip that a flashed as a 0P6Bimg.zip a kitkiat sense version for tmobile. Everything is cool and it runs fine. When I change cid and mid then flashed the sense lollipop firmware I lost my internal memory and twrp read storage as 0mb.
So idk
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Austin3161337 said:
I flashed the Dev RUU as recommended by redpoint73, booted up and now it says that its updating to the latest firmware android 5.0 (OTA Update) However, I am going to install a custom recovery (TWRP) and put on ARHD instead, thanks for the help, and pretty much unbricking my device, lol.
Click to expand...
Click to collapse
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
redpoint73 said:
You're very welcome. Happy to help.
Did you have to do anything to get the RUU to run (like install drivers), or did you just end up running the RUU exe, and it worked?
Click to expand...
Click to collapse
I already had HTC Sync installed, had to boot into Fastboot USB for the thing to get recognized.
I have a Htc One M8 ; s-off, hboot 3.16, running 4.4.2. CID is Roger001, unlocked boot
Problem I have is I'm trying to restore the phone to stock because I want to do OTA updates. I followed the guide to return Canadian HTC1m8 to stock - downloaded the nandroid backup, restored it, flashed a stock image through fastboot;
However, now if I try a OTA it just reboots my phone and normally stalls out on the HTC screen. Nothing gets updated . If i try a factory reset, same thing, and it won't boot into bootloader until I wait a while then restart it. My data won't work anymore and TWRP recovery has disappeared. I think my issue is i flashed the wrong recovery .img, I'm a fairly noob. Checked all the related links and can't figure it out.
Any help would be amazing.
Use an ruu For your phone to update your hboot and make your you flash to recovery partition for twrp
htcspark said:
Use an ruu For your phone to update your hboot and make your you flash to recovery partition for twrp
Click to expand...
Click to collapse
I would but
I can't find an ruu that would work, there doesn't seem to be one for rogers...I dunno if any US carriers would work?
htcspark said:
Use an ruu For your phone to update your hboot and make your you flash to recovery partition for twrp
Click to expand...
Click to collapse
I got an update to work, I think I had the wrong stock installed so it wouldn't work properly. Only thing now is my data isn't working, any assistance with that that could be??
Instead of trouble shooting, I would just flash this TWRP backup tested to work on Rogers M8:
http://forum.xda-developers.com/showthread.php?p=58611288
See end of 1st post in above link.
It is already in lollipop. No OTA update needed.
Use latest TWRP recovery, see 2nd post in above link.