I can't seem to get the Dual shock 3 (PS3 controller) to work wired with my device. It works without problems on my brother's Nexus 5. Wirelessly using the sixaxis controller app it works without problems, but through an OTG cable it doesn't. Is the device not supported? Is there any known way to add support to a ROM?
Cheers
Why not using the gamepad with Bluetooth...if it works use it with that instead of breaking your head because wired it doesn't work
One-M8-Master said:
Why not using the gamepad with Bluetooth...if it works use it with that instead of breaking your head because wired it doesn't work
Click to expand...
Click to collapse
The only reason I can think of is the idea it would use less battery but I don't see that being true.
Because I want to use it with gamestream and since Bluetooth and WiFi uses the same antenna it interferes and gives me lag.
sindrefyrn said:
Because I want to use it with gamestream and since Bluetooth and WiFi uses the same antenna it interferes and gives me lag.
Click to expand...
Click to collapse
Normally both shouldn't be a problem together....do you tried if your pad is connected to start the service in sixaxis app? It worked always for me doesn't matter if I used my old one x or the m8
One-M8-Master said:
Normally both shouldn't be a problem together....do you tried if your pad is connected to start the service in sixaxis app? It worked always for me doesn't matter if I used my old one x or the m8
Click to expand...
Click to collapse
I'm sorry, but I don't understand what you're suggesting. Are you saying I should connect it using USB while connected through Bluetooth?
sindrefyrn said:
I'm sorry, but I don't understand what you're suggesting. Are you saying I should connect it using USB while connected through Bluetooth?
Click to expand...
Click to collapse
No you can use the app without Bluetooth ... You can use it even if you connected the ps3 controller wired ...Normally it should work ... Also if it's connected wired look in keyboard settings if the pad is mentioned there.
And in sixaxis app you also need to enable the option that the pad like the native gamepad
One-M8-Master said:
No you can use the app without Bluetooth ... You can use it even if you connected the ps3 controller wired ...Normally it should work ... Also if it's connected wired look in keyboard settings if the pad is mentioned there.
And in sixaxis app you also need to enable the option that the pad like the native gamepad
Click to expand...
Click to collapse
Are you sure? The Sixaxis controller app is made to be used with bluetooth. Normally Android devices supports ps3 controllers wired natively. I'm still having troubles understanding your suggestion.
I start the app and connect USB, no luck.
sindrefyrn said:
Are you sure? The Sixaxis controller app is made to be used with bluetooth. Normally Android devices supports ps3 controllers wired natively. I'm still having troubles understanding your suggestion.
I start the app and connect USB, no luck.
Click to expand...
Click to collapse
If you go into the settings inside the sixaxis app you can enable that the pad will be saw by system as native gamepad...try that also ...if not it could be that your otg cable doesn't work good with the gamepad...mine works really fine without problems ...only some games aren't able to be played with this controller
That's strange because M8 supports X360 controller natively
One-M8-Master said:
If you go into the settings inside the sixaxis app you can enable that the pad will be saw by system as native gamepad...try that also ...if not it could be that your otg cable doesn't work good with the gamepad...mine works really fine without problems ...only some games aren't able to be played with this controller
Click to expand...
Click to collapse
That option only makes it look like a gamepad to the system when it's connected through bluetooth. Does it work for you? What ROM and kernel are you using?
alwin006 said:
That's strange because M8 supports X360 controller natively
Click to expand...
Click to collapse
I know.
sindrefyrn said:
That option only makes it look like a gamepad to the system when it's connected through bluetooth. Does it work for you? What ROM and kernel are you using?
I know.
Click to expand...
Click to collapse
Using renovate 4.0.1 so latest Rom and stock kernel as flar's kernel is not updated yet ... It always worked for me on every Rom or kernel and also on hox it always worked... Hm
Edit: like I said it could be the OTG cable too...often it doesn't work with some...try to get another one
I just flashed flar's kernel. The controller now works. I haven't ran into any problems either even though it isn't updated.
sindrefyrn said:
I just flashed flar's kernel. The controller now works. I haven't ran into any problems either even though it isn't updated.
Click to expand...
Click to collapse
Yea if could be that on stock kernel some OTG features aren't working like on custom kernels were many things are added or tweaked..but orbits working now then good
The dualshock 4 controller works natively on the m8 wired.
You can use it scroll through the screens and select apps. Not all games work, minecraft being one, but a lot do.
The buttons can be a bit odd though. For example in goat simulator, the options button is headbutt. Quite frustrating.
Does anybody know if there is there anyway of remapping the buttons?
Imnotdave said:
The dualshock 4 controller works natively on the m8 wired.
You can use it scroll through the screens and select apps. Not all games work, minecraft being one, but a lot do.
The buttons can be a bit odd though. For example in goat simulator, the options button is headbutt. Quite frustrating.
Does anybody know if there is there anyway of remapping the buttons?
Click to expand...
Click to collapse
Use any app which supports it, if no support not way to remap...
Gesendet von meinem HTC One_M8 mit Tapatalk
Related
[Update]
Seems like the answer is yes!
I've not got the 3.1 update yet so I can't tests this.
What are the chances that with the new joystick support and host mode that the USB xbox wireless receiver will work? Would be great to use a wireless 360 pad with the emulators and even android games
Xbox360 wont work wireless. only wired. Maybe ps3 ones will work in the future wireless with bluetooth. What i dont understand is that if you will need to download a driver o someone have to make an app like the one for the wii controller.
Just to be clear, I'm referring to the USB connected wireless receiver for PC's to use the wireless controllers. I know work has been done to get it running in Linux, was hoping they would have added support in 3.1 (long shot I know).
Good question on the app, I assume we'll just need the applications to understand the mappings. I assume the emulators will work since they have a built in mapping utility.
jss42 said:
Just to be clear, I'm referring to the USB connected wireless receiver for PC's to use the wireless controllers. I know work has been done to get it running in Linux, was hoping they would have added support in 3.1 (long shot I know).
Good question on the app, I assume we'll just need the applications to understand the mappings. I assume the emulators will work since they have a built in mapping utility.
Click to expand...
Click to collapse
If I had a dang OTG cable i'd be able to tell you...wish verizon would start selling them!
I've now got an otg cable and receiver so once 3.1 hits the UK I'll do some testing
As of now the PC adapter doesn't work. Also app developers need to add some lines of code in order to take full advantage of USB devices. I have dne a little research on it, I don't know how much it would take to add new devices to the xoom, but from looking at it people should be able to write/port drivers to the xoom kinda like how the wii remote work using an app. At least this is my understanding of how it works.
Sent from my Xoom using XDA Premium App
OK guys...
The xbox 360 wireless reciever DOES work I have been playing in snesoid with it quite a bit recently.
solarnz said:
OK guys...
The xbox 360 wireless reciever DOES work I have been playing in snesoid with it quite a bit recently.
Click to expand...
Click to collapse
And how are you doing this?
solarnz said:
OK guys...
The xbox 360 wireless reciever DOES work I have been playing in snesoid with it quite a bit recently.
Click to expand...
Click to collapse
What size you do to get it to work... I just tried and no joy. Wired works fine.
Sent from my MB860 using Tapatalk
OK guys...<br />
<br />
The xbox 360 wireless reciever <b>DOES</b> work I have been playing in snesoid with it quite a bit recently.
Click to expand...
Click to collapse
Sent from my MB860 using Tapatalk
Just have to connect the USB receiver to a OTG cable, then connect the wireless controller like normal. Been using it as well, it works fine!
Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
shadow78 said:
Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
Click to expand...
Click to collapse
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Ironcladz said:
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Click to expand...
Click to collapse
Moga has an app can be downloaded from the play store (moga pivot) and yes it uses bluetooth. This should work without root. If you google moga is a big name which should work on android 2.3 and above. I think the reason is samsung which is now blocking all 3rd part devices from 4.4.2 but I am not sure. I think the only option left is the samsung gamepad..
Not for $100 bucks. That's plain crazy
I use an OTG cable and PS4 controller.
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Any app needed to link them?
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Have you rooted? or the device just support it?
shadow78 said:
Have you rooted? or the device just support it?
Click to expand...
Click to collapse
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
HughesNet said:
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
Click to expand...
Click to collapse
Did you have to download any apps for button management?
I use my ps3 controller as gamepad with an adapter and it's working flawlessly. I've tested it with Dead Trigger 2 and Rayman Fiesta Run.
Sent from my GT-I9505G using XDA Premium 4 mobile app
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
tahlsr said:
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Thanks so much for suggesting something but I'm too anxious to try it, since that thread says it's only for the SM-T700 (8.4") and I have the 10.5". He even specifically states it in post #3.
Kagdilag said:
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Click to expand...
Click to collapse
Has anyone been able to get the sixaxis app working? I can't... I believe it has to do with a missing Samsung Bluetooth protocol in newer Samsung devices.
That was one of my main reasons for getting a tablet!
Not that it matters but I emailed Samsung support and their response: Thank you for contacting Samsung. I see that you would like to know whether Galaxy Tab S supports hooking up to a wired xbox USB controller. I do understand your concern and requirement. However, this Tablet does not support wired xbox USB controller. Unfortunately, as of now theere are no compatible controllers that use an USB OTG cable for this model from Samsung and Samsung does not have any tested results on using PS3 controller with the Tablet. I hope the above provided information address your concern.
controller recharges the tablet
is it possible to connect the controller (that has a battery pack) to the tablet and recharge the tablet?
eg. can a xbox one controller, that has a battery pack, be connected with an mhl cable/usb cable to a tablet and be used to charge the tablet? so the tablet is not drained while playing games.
(i asked this in the accessories forum too, apologies)
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
ayenzel said:
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
Click to expand...
Click to collapse
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
maneetb said:
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
Click to expand...
Click to collapse
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
sku|| said:
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
Click to expand...
Click to collapse
I tried that, but the Galaxy Tab won't find the controllers. I've set it up on multiple devices, but couldn't get it working on this one.
I read that the newer Samsung devices don't come with a Bluetooth protocol that is required for sixaxis to work... I hope I'm wrong!
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I tried all the tricks I know, to no avail, it's really hard to make it work, unless you're willing to do it 'oldschool' style, wired via OTG.
we managed to do this in samsung tab 3 before, 2 PS3 controllers for 2 player fighting games, dunno, seems like we have bluetooth compatibility issues as the PS3 bluetooth is already outdated.
let's here other chime in
what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you dont need to install that app , just set the host IP for the controller and play . that's all
Well, like I said, didn't work until I tried that. Can't tell why though, never had too before. But I tried it since I remember a while ago, sense and touchwizz used to be not compatible with sixaxis app
Sent from my LG-D802 using XDA Premium 4 mobile app
screenshots...method...controller type?
sku|| said:
what ? sixaxis controller works perfectly on my tab s 10.5 :v no issue . even with wire
Click to expand...
Click to collapse
better33 said:
Works on my 8.4 too.. have you tried the compatibility checker first ? It only worked after I used it once
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?
Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app
THEDEVIOUS1 said:
ok, wait...so are both of u guys saying that u have a PS3 controller working through BLUETOOTH with the tab S?! If so then could one of u please provide a screenshot as proof and describe your connection method...did u use the pc program or bond with an otg cable through the sixaxis app then pair and what version of the sixis app are u using? Also..are u using original oem sony controllers or ebay branded ones? :confused
:
@better33
to answer all of the basic questions...yes i'm rooted & yes i've used the app before successfully most recently on the tab pro 8.4 . i really need the above questions i posed to the poster above answered...also as @sku|| suggested i doubt if the compatibility checker helps but yes i've tried that too. Thx for the screenshot though...are u using original sony controllers and more importantly what version of the sixaxis app are u using?
Click to expand...
Click to collapse
I'm using the 0.7.4 version, what else do you need?
Hmm interesting. What rom version are you using? It could be regional issue?
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
better33 said:
Like I said, it wasn't working the first time, so I downloaded the compatibility checker since I remember there used to be issues with touchwizz, and it said it was compatible. I'm using the official ps3 controller. Are you root ?
Forgot to say, I connected the controller on my computer to change the master address and then connected it through Bluetooth
Sent from my SM-T700 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Im using 2 official controllers here, one that came with the ps3 that I used on my tab 7.7 with no issues (bluetooth) . And another aftermarker pink controller that I also used with no issues with tab 7.7. Only thing devious and I have in common might be our custom rom which he compiled
I tried connecting it through PC and change the mac address via sixaxis changer. Installed the compatibility checker and eas advised that it's compatible. Bought the sixaxis app. And.. boom. Stuck at 'listening to controllers'. I'll give it a shot once again
maneetb said:
Hi everyone,
I've searched all over but can't find the answer. I've used the sixaxis app on many devices before. It doesn't seem to work on the tab s, and I believe it is because newer Samsung devices are missing a certain Bluetooth protocol.
My goal is to connect two PS3 controllers to the Tab S to play emulated games (nes, snes n64,etc.)
Does anyone have any information on how to get it working? Thanks!
Click to expand...
Click to collapse
I'm having the same issue in my rooted Tab s 10.5. I changed the master to my tablet, then the tablet never sees the controller. Any luck?
Uhhh. Dunno what I did but.. it worked.
Heres what I remembered.
Uninstalled sixaxis.
Downloaded compatibility checker and run
-hooked up my controller via otg and manually typed my bluetooth MAC
Installed Sixaxis
-tried pairing via OTG. Disconnect cable and tried pairing via BT: unsuccessful
*frustrated*
Killed app compatibility checker
Killed app sixaxis
Reopened sixaxis
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.
Mine is :
1. Have a DS3 controller
2. Have a cable and OTG
3. Connect DS3 via OTG
4. Open sixaxis controller app ( v0.7.4)
5. Tap PAIR
6. Disconnect the controller
7. Change IME
8. Tap Start and connect with DS3
9. Done
ThE_SoUrCe said:
Clicked change IME - list of keyboard appeared. Tapped sixaxis
Clicked start. It connected.
Click to expand...
Click to collapse
Actually I remember doing that too (changing the IME BEFORE looking for devices), maybe that's why it worked for me. I'm on the last stock French rom, can't tell you more I'm at work without the tab.
Sent from my LG-D802 using XDA Premium 4 mobile app
I got it working on Tab S by changing IME to sixaxis > then go to "set up input methods" > made sure sixaxis is checked > into its general settings , checked auto start > then into game setting checking "enable gamepad. Presto!!
Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!
maneetb said:
Hi everyone,
Thanks for all the feedback! I am trying very hard to replicate the steps, but I still can't get past the "Listening for controllers" status.
Can anyone please delete all of the six axis settings, and post detailed step by steps from scratch?
Also, I noticed my bluetooth button isn't lit up (indicating that it is on) when I start Sixaxis. And when I try to turn it on, it doesn't.
Thanks for your help!!
Click to expand...
Click to collapse
Wait, you guys are right.... it is totally random, but I got it working! This time, I did retype the bluetooth address manually and clicked pair (even though it looked the same). Then, it still didn't work. Then I tried it with my regular swiftkey input, and it connected! Then I switched it to six axis.
This was the reason I bought the tablet, so THANK YOU guys for the help (even though we are still kind of puzzled )
I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again
ThE_SoUrCe said:
I got another simpler method that works, so far so good,
-Force close all sixaxis apps (compatibility checker and sixaxis)
-at the back of the controller, there's a reset button, insert anything small enough and reset it
-connect the controller to your device via OTG
-run sixaxis controller app
-tap pair, then tap pair (the one on pop up)[ensure the bluetooth address is correct]
-disconnect OTG
-turn the controller on
-tap Start.
and there you have it.
edit:
and it will not work again as soon as you paired your device to your Samsung Gear LOL..
what you need to do, after using your Samsung Gear, disconnect it, reboot your device and follow the instructions above, it will sync once again
Click to expand...
Click to collapse
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)
maneetb said:
I got it working perfectly yesterday, but couldn't get it today. I tried your steps over and over again, but no luck!
Any way you can post a video? I will be very thankful to the person who can get this working for me! It is frustrating that it worked yesterday flawlessly with two controllers, but only after hours of messing with it (and it isn't working today!)
Click to expand...
Click to collapse
I was about to edit my post for the nth time LOl. Sad to say. I does not work again. I was simply lucky that I managed to do it 3 times in a row. Now. It simply doesnt pair. Could be something messing with the bluetooth becuase once you get it to pair initially. Even if you reboot, it would still pair. But once you connect your device to another bluetooth device such as headset/gear. BT will forget the sixaxis profile and you'll have trouble syncing it again. I'm close to giving up. I'm simply using it with USB OTG just to satisfy my game-cravings. Hope the others who got it working chime in once again if they manage to pair it all the time.
Hi!
Does anyone know how to connect a controller to the OP3? I tried Bluetooth/sixaxis and OTG.
Bluetooth: Can connect to it but wont work in emulators or games.
Sixasis: Wont find the controller
OTG: Light DS4 controller is orange (So it is connected) but won't work in supported games or emulators.
OS: OxygenOS 3.1.2
I tried support but they just say it is not supported. USB controller support is native in Android OS, right? See OnePlus forum where we discuss the problem at hand. Maybe someone here knows a solution. Support OP says it is not supported on OP3. As far as I know it worked on OP1 and OP2.
I really want to play Pokemon en OoT!
annetimdegraaf said:
Hi!
Does anyone know how to connect a controller to the OP3? I tried Bluetooth/sixaxis and OTG.
Bluetooth: Can connect to it but wont work in emulators or games.
Sixasis: Wont find the controller
OTG: Light DS4 controller is orange (So it is connected) but won't work in supported games or emulators.
OS: OxygenOS 3.1.2
I tried support but they just say it is not supported. USB controller support is native in Android OS, right? See OnePlus forum where we discuss the problem at hand. Maybe someone here knows a solution. Support OP says it is not supported on OP3. As far as I know it worked on OP1 and OP2.
I really want to play Pokemon en OoT!
Click to expand...
Click to collapse
Which bluetooth controller do you have? I have the Moga Pocket and it does work, though it took some fiddling around with different apps and then adjusting settings in the emulators.
Prozart said:
Which bluetooth controller do you have? I have the Moga Pocket and it does work, though it took some fiddling around with different apps and then adjusting settings in the emulators.
Click to expand...
Click to collapse
I connected my Playstation 4 Controller through USB.
annetimdegraaf said:
Hi!
Does anyone know how to connect a controller to the OP3? I tried Bluetooth/sixaxis and OTG.
Bluetooth: Can connect to it but wont work in emulators or games.
Sixasis: Wont find the controller
OTG: Light DS4 controller is orange (So it is connected) but won't work in supported games or emulators.
OS: OxygenOS 3.1.2
I tried support but they just say it is not supported. USB controller support is native in Android OS, right? See OnePlus forum where we discuss the problem at hand. Maybe someone here knows a solution. Support OP says it is not supported on OP3. As far as I know it worked on OP1 and OP2.
I really want to play Pokemon en OoT!
Click to expand...
Click to collapse
Have u enabled otg in the settings?
cyraxx84 said:
Have u enabled otg in the settings?
Click to expand...
Click to collapse
Yes, I enabled it. Hoped that would do the trick. No luck there
I'm having the same issue connecting my DS4 controller. It connects to the sixaxis app properly, but the nothing responds to my inputs. I am using oxygen 3.1.3. I'm guessing a different rom will probably fix the issue, but then I'd lose dash charging. Is there any work around? I was considering buying an otg cable later today, but wont since OP has had no luck with it.
nigerson said:
I'm having the same issue connecting my DS4 controller. It connects to the sixaxis app properly, but the nothing responds to my inputs. I am using oxygen 3.1.3. I'm guessing a different rom will probably fix the issue, but then I'd lose dash charging. Is there any work around? I was considering buying an otg cable later today, but wont since OP has had no luck with it.
Click to expand...
Click to collapse
Hi, Thank got i'm not alone! Next step in the process. Installed BlissPop ROM and that made it only worse. There is no way to enable OTG on CM13. So I thought, lets restore my back-up. Now my security pattern is not recognized . Let's hope the already second running restore will work.
Anyone got another plan?
annetimdegraaf said:
Hi, Thank got i'm not alone! Next step in the process. Installed BlissPop ROM and that made it only worse. There is no way to enable OTG on CM13. So I thought, lets restore my back-up. Now my security pattern is not recognized . Let's hope the already second running restore will work.
Anyone got another plan?
Click to expand...
Click to collapse
I tried contacting OnePlus support. Their response was that the OP3 is a very sensitive device and is very sensitive to input and is not designed to work with a PS4. I don't even know where they got PS4 since I didn't even mention that I was using a DS4 with my OP3.
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Up. Anyone could test this with at least any Bluetooth controller? I heard that s10 had a similar issue and it got solved by an update.
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
Most devices just don't have the keylayout files for controllers. Unfortunately, there's no easy way to make them work.
If you have magisk, there's a module called 1controller which you can just install to get that file.
If you don't, I also have the specific file you need to get into /system/etc/keylayout, but obviously, you're gonna need root for that.
I'm having the same problem too.
can you please upload a link
my gamesir g4 works fine
Stanwar said:
Hello, I've recently bought a PS4 controller and I successfully paired it with my phone but the problem is that it doesn't detect any key presses... I've tried the same controller on PC and another phone (running Android KitKat) and it's working fine.
Is this a software issue? How can I fix it? Have anyone tried this too?
Click to expand...
Click to collapse
The default connection via bluetooth using Playstation controllers doesnt work. Or it doesnt fully work at least. I have experienced it on my ps3 and PS4 controller. The only way a controller works is from a Bluetooth Controller made for Android. Or if you really want to use PS controller, you need an app called Sixaxis Controller.
If your phone is not rooted, the only way to do it is by using sixaxis and connect the PS controller directly via Wire. The sixaxis for the wired and wireless are different so dont buy it on the playstore right away
If you have rooted Access, then you can connect it wirelessly bia the sixaxis app.
Only then it will work as it should be.
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Works fine with my Xbox One controller. Son uses it to play minecraft...
stillriza said:
Works fine with my Xbox One controller. Son uses it to play minecraft...
Click to expand...
Click to collapse
Wired or wireless?
Actually, after September update, I just tried to controller again and it's perfectly working through bluetooth.
Xbox One controller works fine via bluetooth, buttons are already mapped.
Stanwar said:
The thing is, it actually works with my low-end tablet. So why not with this expensive phone?
Click to expand...
Click to collapse
I dont know what tablet it is but it might be a feature of the tablet. Ps4 controllers have D-Input mapping while android works natively with X-input controllers. Xbox controllers work right away as it works under X-Input
Sixaxis converts that input to a readable input for the android if youll use a ps4 controller.
Edit: good that you had it working.