I've been suffering through bad wifi connections for so long I don't know if I can stand it anymore. I have my own wifi router and 2 neighbors' all set up on my phone and I spend time in all 3 houses. My phone is pretty much NEVER connected to the right access point and I can't use internet without backing out of what I'm doing and changing connections manually. There has to be a better way.
When I get home and pull in to the garage, it connects to my neighbor's router, deezmms. When I walk in to the house, it stays connected, 1 bar, but I can't do anything until I connect to my own. If I stay in the garage, it will eventually connect to the other neighbor, sparkx, again with 1 bar and a terrible connection to the internet. After connecting to my own, if I go to either neighbors I'm still stuck on my wifi, 1 bar, no internet. And it will NEVER connect to another until I'm COMPLETELY out of range of the the first.
I tried a few apps that didn't do anything at all. I've tried different settings in the advanced wifi settings that didn't help and in some cases gave me bigger problems. I had Tasker set up to turn my wifi off when I was in the car, which got me in to the house and connected to my own wifi in at least that one circumstance but raised a bunch of other headaches (losing connection to Gopro when I start the car at races, among others).
What can I do? I'm at my wits' end here.
qoncept said:
I've been suffering through bad wifi connections for so long I don't know if I can stand it anymore. I have my own wifi router and 2 neighbors' all set up on my phone and I spend time in all 3 houses. My phone is pretty much NEVER connected to the right access point and I can't use internet without backing out of what I'm doing and changing connections manually. There has to be a better way.
When I get home and pull in to the garage, it connects to my neighbor's router, deezmms. When I walk in to the house, it stays connected, 1 bar, but I can't do anything until I connect to my own. If I stay in the garage, it will eventually connect to the other neighbor, sparkx, again with 1 bar and a terrible connection to the internet. After connecting to my own, if I go to either neighbors I'm still stuck on my wifi, 1 bar, no internet. And it will NEVER connect to another until I'm COMPLETELY out of range of the the first.
I tried a few apps that didn't do anything at all. I've tried different settings in the advanced wifi settings that didn't help and in some cases gave me bigger problems. I had Tasker set up to turn my wifi off when I was in the car, which got me in to the house and connected to my own wifi in at least that one circumstance but raised a bunch of other headaches (losing connection to Gopro when I start the car at races, among others).
What can I do? I'm at my wits' end here.
Click to expand...
Click to collapse
You could set up Tasker to connect to different wifi networks according to your location, but i guess the GPS battery drainage would become a problem then. And the locations are probably too close for cellular triangulation to work properly.
An easy solution that might work: Set the wifi networks to the same wifi channel. The interference should ensure that they cancel each other out and don't creep into the next house etc. Also make sure the routers are physically so far away from each other as possible.
Just saw this app which might help. I don't have any experience with it though: https://play.google.com/store/apps/details?id=com.goramart.wifijumper&hl=da
WarCow said:
You could set up Tasker to connect to different wifi networks according to your location, but i guess the GPS battery drainage would become a problem then. And the locations are probably too close for cellular triangulation to work properly.
An easy solution that might work: Set the wifi networks to the same wifi channel. The interference should ensure that they cancel each other out and don't creep into the next house etc. Also make sure the routers are physically so far away from each other as possible.
Just saw this app which might help. I don't have any experience with it though: https://play.google.com/store/apps/details?id=com.goramart.wifijumper&hl=da
Click to expand...
Click to collapse
I'll try that app.. the houses are all close enough together that GPS probably isn't going to take care of it. I might play with the channels but that sounds like it might end up causing headaches, too.
Also, I did move and upgrade my router and added some big, higher gain antennas. I really think I should be getting better range out of it than I am, but I don't know what else to try.
qoncept said:
I'll try that app.. the houses are all close enough together that GPS probably isn't going to take care of it. I might play with the channels but that sounds like it might end up causing headaches, too.
Also, I did move and upgrade my router and added some big, higher gain antennas. I really think I should be getting better range out of it than I am, but I don't know what else to try.
Click to expand...
Click to collapse
this seems more like a problem with the placement of your wifi router? i would check what your signals look like connected to your router througout the house. i would totally remove your neighbor's connections from your saved list so theres really no chance of connecting to their network. realistically your in house wifi should be the strongest signal lols..?
syaoran68 said:
this seems more like a problem with the placement of your wifi router? i would check what your signals look like connected to your router througout the house. i would totally remove your neighbor's connections from your saved list so theres really no chance of connecting to their network. realistically your in house wifi should be the strongest signal lols..?
Click to expand...
Click to collapse
Our yards are pretty big and I spend a lot of time in all of them. I know my wifi is never going to reach to my neighbors fire pit. When I pull in to the garage their signal is stronger, and then I walk in to my house were obviously mine is stronger, but I'm stuck on the neighbors' unless I manually mess with it.
I have no idea how that Wifi Jumper app is supposed to work but it didn't do anything to help my situation. :\
qoncept said:
Our yards are pretty big and I spend a lot of time in all of them. I know my wifi is never going to reach to my neighbors fire pit. When I pull in to the garage their signal is stronger, and then I walk in to my house were obviously mine is stronger, but I'm stuck on the neighbors' unless I manually mess with it.
I have no idea how that Wifi Jumper app is supposed to work but it didn't do anything to help my situation. :\
Click to expand...
Click to collapse
.
I had same problem but I reset the phone and when it promoted me about Wi-Fi optimization upon setup again I unchecked the box... I couldn't find this in the settings though. The only way was to reset
Related
Not sure what is happening, but as soon as I switch on wifi, then I lose all data connection, email, weather, internet etc
Could I have inadvertently changed a setting somewhere? this only seems to be happening for the last few days.
Apk1 said:
Not sure what is happening, but as soon as I switch on wifi, then I lose all data connection, email, weather, internet etc
Could I have inadvertently changed a setting somewhere? this only seems to be happening for the last few days.
Click to expand...
Click to collapse
mine does that when im tethered via wifi...to get around that, i tether via usb...
This oes it when not tethered.
Yeah, I get this too but only when the wifi signal's weak. I live in a big old house with really thick walls. I already have 2 routers putting out the same ssid but in the bedroom it's pretty much a no go.
By weak I mean it says it's getting 1-5meg down and 1 up. It just stops the phone getting any data at all. Don't know if that's the same for you. Is it like that when stood in the same room as your router ?
Router is about 3 ft away!
try this
Apk1 said:
Router is about 3 ft away!
Click to expand...
Click to collapse
Start, settings, connections, wifi, wireless networks, network adapters tab and make sure the "my network card connects to..." dropdown box says "The Internet" Hope that helps
Thanks Luke, I think that has sorted it, I knew it would be something obvious, but didn't know what.
My wifi if being finicky, like not wanting to connect, or even see my home router, is anyone else having any trouble with wifi?
it must be your router.
Rennat said:
it must be your router.
Click to expand...
Click to collapse
that's what i figured, i just thought i'd ask around
Rennat said:
it must be your router.
Click to expand...
Click to collapse
no problems here...
I was running it with the following:
SSID broadcast off
WPA2 Personal
Mac filtering
I turned SSID broadcast back on and it works fine now, someone else want to replicate those settings and see if they have problems?
mrono said:
My wifi if being finicky, like not wanting to connect, or even see my home router, is anyone else having any trouble with wifi?
Click to expand...
Click to collapse
I am having problems connecting to my wireless router, my Evo is saying I have a "poor signal" at my computer desk but my computer is showing me at 100% signal. I think its a Evo software thing but thats my 2 cents. I don't use my wifi often with my phone any way so no biggie for now.
I also have ssid broadcast off and I cant get it working.
-------------------------------------
Sent via the XDA Tapatalk App
Hi everybody, So far I love the EVO even without 4g. Anyway after I turned on my ssid I connected okay. I can see the market and find what I want to download. It says downloading but never does. I have downloaded apps with the 3g but I don't have a signal at my home. I always used winmo before and had no problems downloading on my home network. I wondered if anyone had any suggestions as to what I might be missing. I got root okay and have been having a blast but I sure would like to download some more apps while I am at home. Thanks, Rick
SSID broadcast off and no issues for me thus far.
Yes, me too. Sort of.
My Evo shows 1 bar of wifi signal strength at a distance of 8 feet from the router where my iphone shows full bars. I do get decent download speeds using xspeedlabs free but the upload speed seems to cap at 750kbs where the iphone goes over 1mbs with the same test. There is definitely something weird going on.
bendotson said:
My Evo shows 1 bar of wifi signal strength at a distance of 8 feet from the router where my iphone shows full bars. I do get decent download speeds using xspeedlabs free but the upload speed seems to cap at 750kbs where the iphone goes over 1mbs with the same test. There is definitely something weird going on.
Click to expand...
Click to collapse
I am having similar results as far as signal strength. Sitting 2 feet away from my router I am only showing one bar of signal strength and getting very slow speeds. All of my other wifi devices (including those that are on the opposite side of the house and downstairs) are getting signals ranging from "good" to "excellent". Something definitely seems to be up with the wifi.....
mrono said:
My wifi if being finicky, like not wanting to connect, or even see my home router, is anyone else having any trouble with wifi?
Click to expand...
Click to collapse
I was having wifi issues too. I'm running dd-wrt on my router. Turns out just power cycling the router fixed it. I think I'm going to setup my router to reset weekly.
I get the same issue of having 1 bar of signal strength, regardless of how close I am... even tried on 2 different wireless routers, Linksys-dual band N, and Net gear A/B/G.
I get strong signal from both routers on all other devices, iPhone, iTouch, Touch Pro, Laptops, etc...
I've played with all the settings on the EVO, turning off the mobile data and only having wifi on, changing the encryption settings on the routers... nothing seems to work.
I love the phone, but kinda bummed about this issue.
I have ssid broadcasting turned off and I'm using WPA 2 with no problems.
There is a long, angry thread about this over at HTC's own EVO forum: http://community.htc.com/na/htc-forums/android/f/94/t/2929.aspx
I'm also getting less Wi-Fi performance on the EVO than on other devices in the house.
Using Fresh 1.0.1 rom and also the new Cyanogen rom, with the SSID off, I cannot connect with WiFi, with SSID on, it works fine. Using Cisco/Linksys e2000 router.
Tested with my iPhone with SSID off, it connects no problem. So the problem is not my router.
Is this limitation of EVO?
I notice sometimes that my wifi will disconnect, and when I go to view the network list my home network will say "disabled" under it. I can connect easily by clicking it again, and it doesn't happen that often, but it can be a real battery killer if I don't catch it due to poor service at my house.
yep! same issue here. Every single version so far including RC1.
Yay. Someone else has the same problem as me!
I don't have this issue, I flash the nightlies (well, nightly). I only have my phone associated with one WiFi spot and that's at my house. I use JuiceDefender so that WiFi is automatically disabled when I leave, and enabled when I'm home (location based).
Bump! I'm still getting this problem with my school's wifi network, and it's a necessity that this works for me becuase I have terrible coverage in my apartment.
I have this issue as well. When the phone sleeps, WiFi will disconnect and the connection will show as "disabled." I, too, am using CM 6.1 and I have the WiFi sleep policy set to "never."
I get this issue a lot at work. I always assumed it did it because I'm usually on the edge of the WiFi network, and so after jumping on-and-off enough, it just disables the network.
EDIT: Here's the word from #CyanogenMod on Freenode:
[11:09] <DrMacinyasha> http://forum.xda-developers.com/showthread.php?t=740773 <--Can anyone/any dev comment on this? WiFi networks get marked as "disabled" sometimes on 6.1RC and Nightlies.
[11:11] <@pb> DrMacinyasha: happens when the phone can't register on the wifi network - for instance, you walk into range just enough for it to try, and then in the middle of it trying to get an IP address, you walk out of range again...
[11:11] <DrMacinyasha> Does it re-enable after a certain period of time?
[11:12] <@pb> DrMacinyasha: generally speaking, no
Click to expand...
Click to collapse
I'm glad someone actually figured this out. I don't have the problem as much on CM6.1, but it does happen occasionally. I usually just disable and re-enable wifi, but sometimes I have to completely forget the network and re-add it.
So my phone's data connection does stuff which I can only describe as retarded.
There are comcast wifi hotspots all over the place here. They can come in handy when the LTE signal is weak or nonexistent. But my phone, through the connection optimizer i assume, will connect to any comcast wifi hotspot no matter how weak the signal is even when there's a full strength LTE signal.
So very often I have a great data connection of LTE and my phone suddenly switches to a hotspot with barely one bar of signal. It even does this when i at home with my own wifi. There's a comcast hotspot near my house, but far enough away that the signal is pretty poor. If my phone happens to see the comcast hotspot as I'm driving home and it connects to that, it'll stay connected to that even though my own home wifi signal is at full strength.
Basically, this 'optimizer' is nothing of the sort. It's a pretty dumb application since all it seems to do is connect to any available wifi regardless of the signal strength of the hotspot or over the cell network - and it never bothers to check if there's a better connection once it's connected to something.
Is there any way to make this app even half way intelligent? Or an app i can replace it with?
merkk said:
So my phone's data connection does stuff which I can only describe as retarded.
There are comcast wifi hotspots all over the place here. They can come in handy when the LTE signal is weak or nonexistent. But my phone, through the connection optimizer i assume, will connect to any comcast wifi hotspot no matter how weak the signal is even when there's a full strength LTE signal.
So very often I have a great data connection of LTE and my phone suddenly switches to a hotspot with barely one bar of signal. It even does this when i at home with my own wifi. There's a comcast hotspot near my house, but far enough away that the signal is pretty poor. If my phone happens to see the comcast hotspot as I'm driving home and it connects to that, it'll stay connected to that even though my own home wifi signal is at full strength.
Basically, this 'optimizer' is nothing of the sort. It's a pretty dumb application since all it seems to do is connect to any available wifi regardless of the signal strength of the hotspot or over the cell network - and it never bothers to check if there's a better connection once it's connected to something.
Is there any way to make this app even half way intelligent? Or an app i can replace it with?
Click to expand...
Click to collapse
You're right; it's retarded. Hint: only use it enabled when you want to connect to that Wi-Fi or the type of Wi-Fi that requires the agreement to terms each time you connect. The Optimizer has shown some convenience where a user may roam between that type of Wi-Fi hotspot and data connection.
Android seems smart enough to remember Wi-Fi with typical login. I was on a tire shop today and auto connected to Wi-Fi without looking into remembered Wi-Fi connections (I left Wi-Fi enabled when I left home; often enough, doesn't interfere with cell data when I need it). I freeze the Connections Optimizer and only thaw it when it seems logical.
Sent from my SM-N910P using Tapatalk
merkk said:
So my phone's data connection does stuff which I can only describe as retarded.
Click to expand...
Click to collapse
lol ?
You may want to disable Smart Network Switch in advanced wi-fi settings also.
catseyenu said:
You may want to disable Smart Network Switch in advanced wi-fi settings also.
Click to expand...
Click to collapse
what does that feature do?
And does anyone know of an connection optimizer that is actually half way intelligent?
thanks
merkk said:
what does that feature do?
Click to expand...
Click to collapse
What it's supposed to do and the user experience seem to be 2 different stories.
Every discussion I've read on it recommends killing it.
http://www.conanhughes.com/2014/01/how-to-disable-auto-network-switch-on.html
catseyenu said:
What it's supposed to do and the user experience seem to be 2 different stories.
Every discussion I've read on it recommends killing it.
http://www.conanhughes.com/2014/01/how-to-disable-auto-network-switch-on.html
Click to expand...
Click to collapse
from the article there, it sounds like i am having the opposite problem - my phone isn't jumping from wifi to lte, it's jumping from lte to wifi even if the wifi signal is crap.
Hello,
Ever since I've bought my Galaxy Watch non LTE 46mm, I've been having issues at home with the 2.4Ghz wifi network on all devices. Speeds won't go more than 18-20mbps, while on the 5Ghz I reach 350-400mbps.
My router is having these 2.4Ghz settings:
Channel 6, channel width 20mhz, mode 802.11b/g/n
All my devices: tablets, phones show the same behavior: very weak wifi speed on this freq.
Even my watch drops the BT connection to my phone in a matter of 3 meters from it, like from the couch to the desk.
I remember before having the watch that on 2.4Ghz I always got between 60-80mbps no matter the device used.
Have you rebooted your router recently? I've found that helps speeds sometimes.
RedsonRising said:
Have you rebooted your router recently? I've found that helps speeds sometimes.
Click to expand...
Click to collapse
Yep. I guess the only thing I can do is to try and mess with the wifi channels
That's a good idea. Maybe get an app to see channel usage around you to see what's open. A neighbor may have added things. Maybe change the PW on your router in case someone is piggybacking off it?
RedsonRising said:
That's a good idea. Maybe get an app to see channel usage around you to see what's open. A neighbor may have added things. Maybe change the PW on your router in case someone is piggybacking off it?
Click to expand...
Click to collapse
Well, my wifi is mac filter based, so no chance of someone from outside getting on. I have tried now with the watch turned off, speedtest returned 50mbps on my phone and 68 on my ipad. Once I turned the watch on and it connected to my phone, both devices fell to 17-19mbps.
Hi, may it be too bad reception with the clock because it is too far from your router? Is it the same problem if you put the clock near your router?
xanNecris said:
Hi, may it be too bad reception with the clock because it is too far from your router? Is it the same problem if you put the clock near your router?
Click to expand...
Click to collapse
It's not about the wifi connection of my watch.It's about the fact that when the watch is connected to my phone via bluetooth, all my other devices including the phone, are having bad wifi speeds on 2.4ghz. When I turn the watch off, everything gets back to normal.
It sure sounds like an IP conflict on the network.