[Q] SGH-I747 Baseband Unknown 4.3 - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Way back on 4.1.1 I used CF Auto Root and everything was grand on my AT&T phone.
Then the OTA upgrade nagging started... I caved, it finally annoyed me too much yesterday at work so I let the update do its thing.. and thats when my nightmare started.
it downloaded, it updated, it rebooted and hung at the AT&T logo.
I pulled the battery and powered back up.. it wasn't going to budge.
I had all the content I wanted on the SD so I tried to format cache and restore.. no dice.
I fired up Odin and after a LOT of screwing around it finally came back to life.. booted up on 4.3 but the baseband is hosed.
My warranty bit is set, my fused count is 3 > binary 0.
I think I understand the basic problem, I probably have a 4.2 modem with a 4.3 bootloader and I can't downgrade, I can't upgrade to 4.4 OTA without a working modem.
ANY help pointing me in the right direction from this mess I've created will be greatly appreciated.

so now I'm really confused, I read this thread: http://forum.xda-developers.com/showthread.php?t=1831898
Downloaded this file to the flash card and installed it with twrp: modem_CWM_I747UCUEMJB.zip
did not change a thing, baseband still unknown.

Actually, I'm thinking you may have actually already updated to 4.4.2. That would explain why the 4.3 modem doesn't help.
Install terminal emulator and enter this:
getprop ro.bootloader
This will tell you what firmware you are on and what modem you need.

You are correct ro.bootloader = I747UCUFNE4
ro.build.PDA = I747UCUEMJB
there isn't an NE4 option on this thread: http://forum.xda-developers.com/showthread.php?t=1831898
I download the modem from page 3 of this thread and I am back in business!
http://forum.xda-developers.com/showthread.php?t=2788357&page=3
Thank you very much for your assistance!

rcouch00 said:
You are correct ro.bootloader = I747UCUFNE4
ro.build.PDA = I747UCUEMJB
there isn't an NE4 option on this thread: http://forum.xda-developers.com/showthread.php?t=1831898
I download the modem from page 3 of this thread and I am back in business!
http://forum.xda-developers.com/showthread.php?t=2788357&page=3
Thank you very much for your assistance!
Click to expand...
Click to collapse
Thank you for replying, You just saved my phone also haha

krycus21 said:
Thank you for replying, You just saved my phone also haha
Click to expand...
Click to collapse
Fair warning I can't get Wifi to turn on even after disabling Knox. I have unlimited data so I'm not that concerned, but it may be a deal breaker for anyone else.

Wifi should return once you update the rom to 4.4.2...
Sent from my SAMSUNG-SGH-I747 running TMS3KK-2.0

Viper67857 said:
Wifi should return once you update the rom to 4.4.2...
Sent from my SAMSUNG-SGH-I747 running TMS3KK-2.0
Click to expand...
Click to collapse
If I use a 4.2 modem I get Wifi but no baseband
If I use a 4.4 modem I get a baseband but no wifi
You need both to get 4.4.2 ota
Not clear how I can get upgraded.

Flash it in custom recovery.. There's a modified ota around here somewhere...
Sent from my SAMSUNG-SGH-I747 running TMS3KK-2.0

rcouch00 said:
Fair warning I can't get Wifi to turn on even after disabling Knox. I have unlimited data so I'm not that concerned, but it may be a deal breaker for anyone else.
Click to expand...
Click to collapse
In my case I just installed the wrong modem, Wifi and LTE still works for me. I hope you get that part fixed

WiFi is firmware/kernel dependant now. So if you are running a 4.3 rom/kernel, on top of 4.4.2 firmware, WiFi will not work.
Same is true if running a 4.4.2 rom/kernel on top of 4.3 firmware.
In both cases you need to flash a custom kernel such as kt747.

Viper67857 said:
Flash it in custom recovery.. There's a modified ota around here somewhere...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2789917
Step 6, downloading the file before I go to sleep, I'll give this a shot tomorrow, thanks for the tip.

If anyone is in the same boat, I performed the update in my previous post and now have 4.4.2 and wifi connectivity is restored.
Thank you to everyone

Related

[Q] Trying to downgrade from 4.4.2 (Cyanagenmod 11) to 4.1.2 stock (T999UVDMD5)

As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
huz666 said:
As you'll soon discover, I'm a noob. I stupidly took the OTA update on my Samsung Galaxy S3 T-Mobile T999 from 4.1.2 to 4.3. Since doing so mine and my wife's phone (did the same thing to her also) gets in a mess after being connected to the car stereo bluetooth and prevents outgoing calls unless the phone is rebooted.
So to try to solve this, I rooted the phone and installed CM 11, so now I'm on 4.4.2. This didn't help the issue either and instead is worse at connecting to the bluetooth.
I want to get my phone back to the stock 4.1.2 rom, which I got from sammobile (PDA T999UVDMD5) or at worst back to the 4.3 stock rom (PDA T999UVUEMJC).
This morning I tried to flash T999UVDMD5_T999TMBDMD5_T999UVDMD5_HOME.tar using ODIN 307 but it failed almost instantly with an Fail! Auth message.
I also tried to flash CM 10.1 zip on my SD card using ClockworkMod Recovery v 6.0.4.5 but again it failed almost instantly (sorry I didn't take note of the error).
So now I'm back to CM 11. So any suggestions for how to get back to either of the stock roms?
Click to expand...
Click to collapse
If you are getting errors in both odin and cwm, it sounds like it is a root issue. In other words, it sounds like the apps are being denied access to root and therefor cannot flash. Both odin and cwm are able to generate logs so you can tell the reason for the fail. Personally, I would recommend flasing twrp recovery instead of cwm since it seems to simplify alot and is a little better for our device. Without knowing exactly why the flash is failing, i would just recommend to try and re-root the phone again.
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Perseus71 said:
Did you put the phone in Downloading mode before connecting to the Odin ?
Do not try to flash 4.1.2 ever. It will brick your phone.
Click to expand...
Click to collapse
Yes the phone was in downloading mode. I couldn't find any posts that thought that I would brick my phone for sure by downgrading so I thought I would try. Could I go back to the 4.3 Stock ROM with some degree of confidence?
Yes you can go back to 4.3 Stock.
Perseus71 said:
Yes you can go back to 4.3 Stock.
Click to expand...
Click to collapse
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
huz666 said:
So I'm now back to Stock 4.3 by doing a flash via Odin. I did (stupidly) try to then go back to 4.1.2 again using Odin having put the phone in USB debugging mode first but I still got the same Auth Fail error.
Thanks for all the help.
Click to expand...
Click to collapse
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
serio22 said:
You cannot downgrade like that once you have updated to official 4.3 firmware, no offence but why would you try it even after Perseus said not to? Anyway if you want to go back to 4.1.2 so badly just download a 4.1.2 ROM and flash it in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
.
Thanks for the advice. I think I'll just quit while I'm only slightly behind now and remain on 4.3 Stock. I appreciate everyone's help and suggestions.
Downgrade from CM11 4.4.2 to 4.3 on I747
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
You seriously need to do some reading
Sent from my SGH-T999 using Tapatalk
nitagro said:
I went from 4.3 stock to CM11 on my i747 but i didnt like the update. So i am trying to go back to 4.3 however whenever i try to install the 4.3 zip file thru twrp or CWM, it fails. As far as i know there is no odin file for going back. I tried to flash rogers 4.3 file through odin (thinking i would flash at&t modem later) but that also failed.
I would appreciate any help on how to install 4.3 once 4.4.2 has been installed on an i747
Click to expand...
Click to collapse
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Perseus71 said:
For One, you are on the wrong forum. This is for T-Mobile's S3 not AT&T. Second, Like @passtheknowledge said, you really need to do significant research and reading here on XDA.
Click to expand...
Click to collapse
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
nitagro said:
I was up all night reading and trying all the suggestions that have been posted so far. Nothing worked. I would appreciate if someone can throw some light on what might be wrong.
Click to expand...
Click to collapse
Please Read through this Thread. For Future Reference, all Odin Files for S3 in general are looked up by unique Keyword Root66. That thread is the right place for you to post errors or issues. If there's no 4.3 image for your phone there, you can post a request as well.
For your immediate Problem, there is a an alternate ATT StockMod Rom by @saranhai Please see this thread. Pay particular attention to the mandatory requirement of flashing a particular modem beforehand.

Tmobile Odin Fail

Hello! I am new to this forum but I am in a little fickle.
I have the Samsung Note 2 TMOBILE and couple weeks ago, I updated to 4.3 through regular OTA. I then rooted and flashed Cyanogenmod 11 and thus, voided my Samsung Knox Warranty bugger thing. I then attempted to go back to stock by flashing stock 4.1.1 through Odin and it worked! I tried to do OTA update again but I realized that the Samsung Knox Void kept me from reaching update services... So I was stuck at 4.1.1 Stock. From there, I was able to flash other custom roms and everything worked.
However, this is a problem for me. The 4.1.2 update from Tmobile was what enabled LTE on my note 2. So right now, I have the old baseband(?) that does not allow LTE. I even attempted to flash a non-knox 4.1.2 (which allowed LTE) through Odin and everything worked until the last second, where Odin is supposed to flash PASS..... It flashed FAIL and I was unable to update my baseband(?).
I was wondering if there is another way to enable LTE by updating to 4.1.2 in any way? Or is this completely unable due to the Samsung Knox?
Thank you in advance.
Alex9995 said:
Hello! I am new to this forum but I am in a little fickle.
I have the Samsung Note 2 TMOBILE and couple weeks ago, I updated to 4.3 through regular OTA. I then rooted and flashed Cyanogenmod 11 and thus, voided my Samsung Knox Warranty bugger thing. I then attempted to go back to stock by flashing stock 4.1.1 through Odin and it worked! I tried to do OTA update again but I realized that the Samsung Knox Void kept me from reaching update services... So I was stuck at 4.1.1 Stock. From there, I was able to flash other custom roms and everything worked.
However, this is a problem for me. The 4.1.2 update from Tmobile was what enabled LTE on my note 2. So right now, I have the old baseband(?) that does not allow LTE. I even attempted to flash a non-knox 4.1.2 (which allowed LTE) through Odin and everything worked until the last second, where Odin is supposed to flash PASS..... It flashed FAIL and I was unable to update my baseband(?).
I was wondering if there is another way to enable LTE by updating to 4.1.2 in any way? Or is this completely unable due to the Samsung Knox?
Thank you in advance.
Click to expand...
Click to collapse
try flash modem with mobile odin
cosmyndemeter said:
try flash modem with mobile odin
Click to expand...
Click to collapse
How does one flash a modem? What exactly is the modem in the note 2?
Alex9995 said:
How does one flash a modem? What exactly is the modem in the note 2?
Click to expand...
Click to collapse
how to flash modem with mobile odin
what is modem?why i need that?
zPhaph thus
cosmyndemeter said:
how to flash modem with mobile odin
what is modem?why i need that?
Click to expand...
Click to collapse
Thank you! Before I mess anything up, I just have a couple more questions. Do I just have to find the 4.1.2 modem? Or even 4.3? I already have CWM and am rimming cm 11 4.4.2. Does this mean I must downgrade first before I attempt to flash a modem?
Alex9995 said:
Thank you! Before I mess anything up, I just have a couple more questions. Do I just have to find the 4.1.2 modem? Or even 4.3? I already have CWM and am rimming cm 11 4.4.2. Does this mean I must downgrade first before I attempt to flash a modem?
Click to expand...
Click to collapse
flash the modem for that firmware you have before install cm11
hit thanks button if this help you
cosmyndemeter said:
flash the modem for that firmware you have before install cm11
hit thanks button if this help you
Click to expand...
Click to collapse
Hey man! It worked. I am finally getting LTE service after I installed the 4.3 modem. I just want to thank you so much! And I will hit the thanks button.
Alex9995 said:
Hey man! It worked. I am finally getting LTE service after I installed the 4.3 modem. I just want to thank you so much! And I will hit the thanks button.
Click to expand...
Click to collapse
:good:

[Q] Rooted after recovering from softbrick, need Modem and move to 4.4.2

I have the phone up and running and do not have a modem.
Here is where it is at:
CWM installed
SU installed
Android 4.2.2
Baseband M919UVUEMK2
Kernel 3.4.0-440244
Build JDQ39.M919UVUAMDB
I wish to move to 4.4.2 with the phone rooted.
I have tried to move to MDL with odin, but get a FAIL!
Could someone please help.
Thank you
Restored to factory and working with original image from TMobile.
williambs said:
I have the phone up and running and do not have a modem.
Here is where it is at:
CWM installed
SU installed
Android 4.2.2
Baseband M919UVUEMK2 Modem version
Kernel 3.4.0-440244
Build JDQ39.M919UVUAMDB Build ID
I wish to move to 4.4.2 with the phone rooted.
I have tried to move to MDL with odin, but get a FAIL!
Could someone please help.
Thank you
Click to expand...
Click to collapse
It looks like you already have the MK2 modem installed. You don't want MDL for TW4.3 or AOSP 4.4.x builds.
Your Build ID: Build JDQ39.M919UVUAMDB will change depending on which ROM you flash and has nothing to do with the modem.
lordcheeto03 said:
It looks like you already have the MK2 modem installed. You don't want MDL for TW4.3 or AOSP 4.4.x builds.
Click to expand...
Click to collapse
WIFI is not working and I wish to move to 4.4.2.
How do I get there?
Thank you
williambs said:
WIFI is not working and I wish to move to 4.2.2.
How do I get there?
Thank you
Click to expand...
Click to collapse
From what you posted, you are already on 4.2.2.
Also, when you say WiFi isn't working... do you mean it won't connect? Does it connect but you don't get any data? Are you getting the "connection unstable" warning? Could try using a different kernel.
lordcheeto03 said:
From what you posted, you are already on 4.2.2.
Also, when you say WiFi isn't working... do you mean it won't connect? Does it connect but you don't get any data? Are you getting the "connection unstable" warning? Could try using a different kernel.
Click to expand...
Click to collapse
WIFI will not turn on at all. switch does not move to ON when I slide it over
Thank you
Correction, wish to move to 4.4.2
williambs said:
WIFI will not turn on at all. switch does not move to ON when I slide it over
Thank you
Correction, wish to move to 4.4.2
Click to expand...
Click to collapse
In that case, I would say to go ahead and download whichever 4.4.2 ROM you want to run from either the Android Development or Original Development section. No TouchWiz ROMs are 4.4.2 so that means no WiFi calling if that's important. Grab a custom recovery (TWRP, CWM, etc) if you don't already have one. Make a backup of your current setup via recovery, then follow the installation instructions for whichever ROM you choose to go with.
You already have the correct modem for using 4.3+ and I see no reason why your WiFi issue should persist through a different ROM. I'd say you're ready. If you do still have WiFi issues once you update, try using a different kernel.
lordcheeto03 said:
In that case, I would say to go ahead and download whichever 4.4.2 ROM you want to run from either the Android Development or Original Development section. No TouchWiz ROMs are 4.4.2 so that means no WiFi calling if that's important. Grab a custom recovery (TWRP, CWM, etc) if you don't already have one. Make a backup of your current setup via recovery, then follow the installation instructions for whichever ROM you choose to go with.
You already have the correct modem for using 4.3+ and I see no reason why your WiFi issue should persist through a different ROM. I'd say you're ready. If you do still have WiFi issues once you update, try using a different kernel.
Click to expand...
Click to collapse
Alright, I will give it a try and reinstall KOT49H【4.4.2】Danvdh and see how it goes. Of course after doing a backup.
Thank you

After flashing to stock I have no data/cell phone reception

I used the mobile Odin method of flashing back and I also used triangle away before I did this if it's worth mentioning. So after struggling with getting back to stock all day I finally make it happen I put my SIM card back in and notice I am getting no cell phone reception. WiFi works but without WiFi I can't do anything data wise. I contacted t-mobile support and they found no issues with the SIM card
Anyone have ideas on what I can do to fix this?
Anyone? I'm kind of stuck here
griffsbrown said:
I used the mobile Odin method of flashing back and I also used triangle away before I did this if it's worth mentioning. So after struggling with getting back to stock all day I finally make it happen I put my SIM card back in and notice I am getting no cell phone reception. WiFi works but without WiFi I can't do anything data wise. I contacted t-mobile support and they found no issues with the SIM card
Anyone have ideas on what I can do to fix this?
Click to expand...
Click to collapse
What version radio are you showing? Does it match the stock ROM you flashed?
elpmet27 said:
What version radio are you showing? Does it match the stock ROM you flashed?
Click to expand...
Click to collapse
How can I find this info out? I am kind of nooby at this stuff so I dont know
What Firmware version did you just flash ? Do you see the same value under Settings > About > Baseband ?
What firmware did you have before using Mobile Odin ?
Perseus71 said:
What Firmware version did you just flash ? Do you see the same value under Settings > About > Baseband ?
What firmware did you have before using Mobile Odin ?
Click to expand...
Click to collapse
Ok so more info, I used this unroot method and followed it very close:
http://www.androidrootz.com/2012/10/how-to-unroot-samsung-galaxy-s3-no.html
I'm guessing this is what is causing the problem, I flashed the modem from UVDMD5. Only the modem I could not get anything else flash on odin so it was only the modem. So if I had to guess its a problem of getting the right modem back on the phone.
(On a side note, will I ever be able to get my phone back to 100% stock/able to get official updates,ect? Is it even possible?)
Edit: As far as the baseband goes it says "unknown".
I have no idea what that version is. I Suspect its the dreaded UVUEMJC. You will need to flash UVUEMJC Modem for T999 from this thread.
EDIT- Yes its indeed possible to go back to complete stock in order to receive Stock updates. After your IMEI is restored, you can use KIES to go back to complete stock. Please realize, you can also get latest update from Sammobile.com and flash it via Odin
Perseus71 said:
I have no idea what that version is. I Suspect its the dreaded UVUEMJC. You will need to flash UVUEMJC Modem for T999 from this thread.
EDIT- Yes its indeed possible to go back to complete stock in order to receive Stock updates. After your IMEI is restored, you can use KIES to go back to complete stock. Please realize, you can also get latest update from Sammobile.com and flash it via Odin
Click to expand...
Click to collapse
Dont know if you remember but I am the guy you helped in the other thread get unrooted. I was the one having trouble with it getting stuck at "system" when I was trying to get back to stock with the firmware from sammobile.com. Do you think it would be ok to try it again now that I'm on stock?
Don't recall the conversation. But there is a easier way to unroot by removing SuperSU after you get your IMEI back.
Perseus71 said:
Don't recall the conversation. But there is a easier way to unroot by removing SuperSU after you get your IMEI back.
Click to expand...
Click to collapse
This thread in question: http://forum.xda-developers.com/showthread.php?t=2691892
Also so how do I go about flashing a different modem without being rooted? Do I just do it through odin like I did before? Or will I need to reroot/get a custom recovery?
If you don't have custom Recovery, then use mobile Odin to flash the Modem.
Better yet, please flash UVUEMJC Firmware via Odin again.
Perseus71 said:
If you don't have custom Recovery, then use mobile Odin to flash the Modem.
Better yet, please flash UVUEMJC Firmware via Odin again.
Click to expand...
Click to collapse
Ok I will get to flashing it right now. Hopefully the lack of root wont be a problem.
EDIT: Uh I have a feeling it might have been a problem. I dont know actually. Here is what happened:
http://puu.sh/7JqCb.png
Perseus71 said:
If you don't have custom Recovery, then use mobile Odin to flash the Modem.
Better yet, please flash UVUEMJC Firmware via Odin again.
Click to expand...
Click to collapse
Ok so after my last post I figured it needed to be rooted so I triedx to root66 method and got this message:
http://puu.sh/7Juux.png
In other words stuck in the same boat as the old thread.
Please post the complete log data from the second image of Root66.
You don't flash a modem that way. It can brick.

[Q] No Sound after updating to 4.4.4 NK2

Hello all, I need some help. I bought a used S4 from a local person here. It was on an old update, Version 4.3.
I rooted it, did not take the OTA. installed custom recovery and flashed latest NK2 via philz touch, at first the WiFi wasnt working, so I installed the wifi fix/NON-HLOS.bin via odin. I also installed Modem.bin to upgrade to the latest baseband of NK2 also. This is when the trouble started, I probably messed up.
Currently both baseband and build are now NK2
I've downloaded NK2 TAR and flashed them back to t-mobile stock in an effort to fix, I used triangle away, cleared the counters, flashed stock NK2 in odin. Still no sound through the speakerphone. It was working before I did all this so I don't think its a hardware issue, Anyone have any ideas? Best I can tell is its probably the NON-HLOS.bin I flashed. Is there a correct one I can do, or anyway I can fix this? I've tried all I know with my limited knowledge of this phone. I had first flashed modem.bin i found here on xda, but i think my mistake was flashing the LTE/NON-HLOS.bin. probably is an older one for my bootloader im on? not really sure. I have also tried these with no success. http://forum.xda-developers.com/showpost.php?p=55373341&postcount=22
Any help is appreciated! Thanks so much!
You only need the modem bin if you are staying on an older bootloader, that was your mistake. Check what bootloader you have right now and you need to match your NON-HLOS to whatever bootloader you currently have
serio22 said:
You only need the modem bin if you are staying on an older bootloader, that was your mistake. Check what bootloader you have right now and you need to match your NON-HLOS to whatever bootloader you currently have
Click to expand...
Click to collapse
I will try this, I guess I'm confused exactly how to find out what bootloader im on, and where to find the matching NON-HLOS.bin file for it?
EDIT: used Phone info app from play store,
bootloader is MK2
baseband says NH7
PDA is NK2
CSC is NK2
Anyway to just update to the latest? Or whats reccomended version to stay on here?
Skater4599 said:
I will try this, I guess I'm confused exactly how to find out what bootloader im on, and where to find the matching NON-HLOS.bin file for it?
EDIT: used Phone info app from play store,
bootloader is MK2
baseband says NH7
PDA is NK2
CSC is NK2
Anyway to just update to the latest? Or whats reccomended version to stay on here?
Click to expand...
Click to collapse
Well you can re-flash NK2 firmware. Sometimes you have to flash a couple times for it to fully update everything
serio22 said:
Well you can re-flash NK2 firmware. Sometimes you have to flash a couple times for it to fully update everything
Click to expand...
Click to collapse
Ok I Odin'd NK2 several times, still no joy so I ended up using Fenny's guide to return to complete official stock on 4.4.2, then took tmobile's OTA updates and got back to 4.4.4 NK2 official, now bootloader says official samsung, status says official.
Bootloader: M919UVUFNK2
Baseband: M919UVUFNK2
PDA : M919UVUFNK2
CSC : M919TMBFNK2
EDIT: FIXED! Ended up a terrible coincidence, I took off and reseated the speaker on the back and it worked! Thank you so much for your help and pointing me in the right direction serio22 its much appreciated, I hit thanks for ya!
Still no sound, As far I read there are only 2 bootloaders for this device, so Im pretty sure I'm on the new one since it mentions knox on it.
I suppose its possible the hardware happen to fail at same time as all this? Seems like a crappy coincidence, but I dont know what else to try. Any other ideas? Everything is stock/official non rooted and up to date at this point.
Cool thanks posting what worked for you

Categories

Resources