Develop Bugs

[Kernel][ME301T] KitKat Compatibility Pack V2.5 [May 13 2014]

DISCLAIMER - I do not own a ME301T and so cannot personally test the features in this thread. I have to rely on feedback from the community.
You asked! We Listened! Introducing the almighty MeMo Pad ME301T CyanogenMod/KitKat Compatibility pack!!!!!!
This package will install a kernel, as well as all the files necessary to make your MeMo pad work with Android 4.4 based roms.
Currently this package will work on the following roms:
CM11 nightlies
OmniROM for Android 4.4
This will NOT work on the following roms:
PAC
Instructions for installing:
You are on a 4.2 bootloader right?
Download the rom you wish to use.
Download this compatibility pack
Transfer files to your microSD card
reboot into a KitKat Compatible recovery (I suggest TWRP from Scanno: HERE)
Factory reset
Install ROM of choice
Install Kernel from this thread
Wipe cache/dalvik
Reboot
PROFIT
DOWNLOAD - KitKat Compatibility Pack 1.0
DOWNLOAD - KitKat Compatibility Pack 2.0
DOWNLOAD - KitKat Compatibility Pack 2.1
DOWNLOAD - KitKat Compatibility Pack 2.5.1
If you still want Android 4.3 pack then see below
Download - CM-ME301T compatibility pack 1.0
Download - CM-ME301T OC compatibility pack 1.0
Download - CM-ME301T OC compatibility pack 1.1
Feedback is KEY to the success of this package. If you run into any problems, or realize that certain things aren't working, please post a logcat and as much detail as possible
I'd like to thank the following for their contributions to make this possible:
krash1256 - For offering her ME301T as the official testing Guinea Pig of this package.
nikybiasion - For finding out how to fix wifi and auto-rotation
scanno - for bringing KitKat to ME301T users
Also a thanks to krash1256 for her kind donation!

Reserved

Whoo hoo. We have our own thread.

Tested & Working
The Great GRIMLOCK_CM_3.1 of course.
CMB Roms r2rc1 http://forum.xda-developers.com/showthread.php?t=2512412
ParanoidAndroid v3.99 RC2 http://forum.xda-developers.com/showthread.php?t=2415962
SlimBean http://forum.xda-developers.com/showthread.php?t=2411815
Carbon ROM http://forum.xda-developers.com/showthread.php?t=2369230
JELLYBRO KANG http://forum.xda-developers.com/showthread.php?t=1681014

I'm running 4.3.1 AOKP at the moment and everything also seems to be working fine in this rom:
http://forum.xda-developers.com/showthread.php?t=2362125

Awesome!
:good::good::good:

Can anyone running this confirm that both speakers are working?

Both speakers are working here although i think the volume used to be louder on cromi x.
Sent from my Asus Memo Smart 10 using Tapatalk 4

archspijkenisse said:
Both speakers are working here although i think the volume used to be louder on cromi x.
Sent from my Asus Memo Smart 10 using Tapatalk 4
Click to expand...
Click to collapse
Try this app: I include it in my stock based roms and it works like a dream:
VIPER4ANDROID
I use the FX version because I believe the other version is only for headphones.

I compared the sound of cromi x and an Android 4.3 rom, but i must say that the sound of cromi is louder. Tried to install viper4android and seems to work over headphones, but when playing sound over speakers i do not hear much of a difference. I read something in cromi x about lib change to improve sound on a me301t? Is it possible in a kernel to run on an 4.3 rom?
Sent from my Asus Memo Smart 10 using Tapatalk

archspijkenisse said:
I compared the sound of cromi x and an Android 4.3 rom, but i must say that the sound of cromi is louder. Tried to install viper4android and seems to work over headphones, but when playing sound over speakers i do not hear much of a difference. I read something in cromi x about lib change to improve sound on a me301t? Is it possible in a kernel to run on an 4.3 rom?
Sent from my Asus Memo Smart 10 using Tapatalk
Click to expand...
Click to collapse
Did you try the FX version? There are 2 versions of Viper4Android
There are a bunch of audio lib files for the ME301 that sbdags gave me for my grimlock rom as well, but I am not sure if they will have any sort of effect on the 4.3 roms, as those lib files were designed for stock based 4.2

Try installing ViPER4Android_XHiFi_4.0~4.3_2102-1.apk
Or you also need to play with some of the settigs.
Try these:
Select Effect Strength Extreme
Max Gain 10x
Hi Clarity 100
Output Gain 6.0 db
Limt Threshold 0 db
Oh and don't forget you have to go into Settings Sound and Music effects and make sure ViPER is selected.
archspijkenisse said:
I compared the sound of cromi x and an Android 4.3 rom, but i must say that the sound of cromi is louder. Tried to install viper4android and seems to work over headphones, but when playing sound over speakers i do not hear much of a difference. I read something in cromi x about lib change to improve sound on a me301t? Is it possible in a kernel to run on an 4.3 rom?
Sent from my Asus Memo Smart 10 using Tapatalk
Click to expand...
Click to collapse

Gonna try it tomorrow. Tablet is charging at the moment. Thanks.
Sent from my MI 2A using Tapatalk

Someone could pull the volume mod from cromi it might be able to implemented in these roms.
Any bugs anyone has encountered? Other than the unmodified sound levels? Anyone have a favorite of the 4 listed to work so far?

mirrin said:
Someone could pull the volume mod from cromi it might be able to implemented in these roms.
Any bugs anyone has encountered? Other than the unmodified sound levels? Anyone have a favorite of the 4 listed to work so far?
Click to expand...
Click to collapse
You can try this: These are the audio parts that sbdags gave me for GRIMLOCK.
FLASH AT YOUR OWN RISK. I cannot test it as I don't have an ME301T

Flashed it, rom did not boot.
Sent from my MI 2A using Tapatalk

archspijkenisse said:
Flashed it, rom did not boot.
Sent from my MI 2A using Tapatalk
Click to expand...
Click to collapse
Send me a logcat? That way I can try and determine the source of the problem.

archspijkenisse said:
Flashed it, rom did not boot.
Sent from my MI 2A using Tapatalk
Click to expand...
Click to collapse
I would just recommend using DSP manager instead of trying to get the sound stuff from cromi

With some apps you can't use dsp managers. Like soundcloud or tunein radio.
How do i create a logcat? Connect tablet to pc and use adb?
Sent from my ME301T using Tapatalk

archspijkenisse said:
With some apps you can't use dsp managers. Like soundcloud or tunein radio.
How do i create a logcat? Connect tablet to pc and use adb?
Sent from my ME301T using Tapatalk
Click to expand...
Click to collapse
https://sites.google.com/site/androidhowto/how-to-1/save-logcat-to-a-text-file
Ignore the eclipse stuff. As long as you have ADB installed.

Resurrection Remix ROM

Resurrection Remix ROM for Xperia M 5.1.3
This rom contains lot of bugs even lot of UI glitches.
Eg. Music player music art get stuck on the lock screen and dose not go off. theme needs to be reapplied.
Worst DSP manager and sound from music player, setting does not work or it causes over effect.

Try Reflash the ROM, first flash 4.3 ROM with Root, and do full wipe in CWM, flash the ROM (Boot IMG is Include in the ROM file) :good:
Try it
Correct Me If I wrong

AlanXM said:
Resurrection Remix ROM for Xperia M 5.1.3
This rom contains lot of bugs even lot of UI glitches.
Eg. Music player music art get stuck on the lock screen and dose not go off. theme needs to be reapplied.
Worst DSP manager and sound from music player, setting does not work or it causes over effect.
Click to expand...
Click to collapse
mine works great bro, a little glitch does not a big problem for me
on think though, it lack of Wifi authentication via SIM, others are just awesome

Naufal Sidik said:
Try Reflash the ROM, first flash 4.3 ROM with Root, and do full wipe in CWM, flash the ROM (Boot IMG is Include in the ROM file) :good:
Try it
Correct Me If I wrong
Click to expand...
Click to collapse
You r right dude, I did the same. The rom is not good.
For now I am using Carbon rom [ROM][4.4.2][KitKat] Unofficial Carbon builds [Beta #1][05-05-2014]
Its better than all other roms. Battery performance too good. No bugs except some UI issues.
Music is also good.

madper said:
mine works great bro, a little glitch does not a big problem for me
on think though, it lack of Wifi authentication via SIM, others are just awesome
Click to expand...
Click to collapse
Its good if the bugs are inside or if found after lot of digging but this rom....
Anyways now I am using [ROM][4.4.2][KitKat] Unofficial Carbon builds [Beta #1][05-05-2014]
Its best

AlanXM said:
Its good if the bugs are inside or if found after lot of digging but this rom....
Anyways now I am using [ROM][4.4.2][KitKat] Unofficial Carbon builds [Beta #1][05-05-2014]
Its best
Click to expand...
Click to collapse
Well, i'd like to try to.. but the word Beta scare me a bit, LOL

[MOD] [KK/LP] [PORT] AudioFX from CyanogenMod 11S / CyanogenMod 12

Hi guys.
Here is a port from CyanogenMod's new DSP manager called AudioFX, present in CM11S (for the OnePlus One) and also in CM12 and the ROMs based on it.
Installing this is simple. Just download the flashable zip which is proper for your Android version and flash it via custom recovery.
Notes:
1. Do a nandroid backup before flashing. I'm being serious. Do NOT skip this step.
2. KitKat version tested only on the Moto G running stock 4.4.4.
Lollipop version was tested on same device running GPE 5.0.1.
Works with Motorola stock roms too, regardless of being odexed or deodexed.
Might also work on other Moto devices such as the Moto E (1st gen, maybe 2nd gen too), G 2nd gen, X (both generations), and Droid Turbo / Moto Maxx. However, I CANNOT guarantee that it'll actually work.
3. This will remove DSPManager, AOSP MusicFX or Motorola AudioEffects if one of them is already installed.
4. As a protection measure, the flashable zips have an Android version check function in their scripts. So be sure to download the right version or it'll refuse to install.
Lollipop version originally based on @eng.stk's zip for the Nexus 5 -- original thread is here http://forum.xda-developers.com/google-nexus-5/themes-apps/mod-cm-dspmanager-universal-zip-t2939933
And thanks to the very first author, the CyanogenMod team. Huge kudos to them.
Changelog
Version 1.0
— Initial release.
Version 1.0r1
— Revised updater-script - goodbye gigantic alert text
— Now removes Motorola's AudioEffects too, which causes conflicts with this app and causes Settings FC's

Changelog moved to OP.

Reserved #2.

works in stock 5.0.2 retail brasil??

andres7004 said:
works in stock 5.0.2 retail brasil??
Click to expand...
Click to collapse
yes, should work on all lollipop roms, including stock
but wait till i upload version 1.1, because i put a wrong file in version 1.0 for lollipop
edit: version 1.0 is safe to download, i thought the audio effects config file was wrong but its okay. you can download and flash it

Does this make the bass sound same as it was on the other phones?
Because on my XT1032 running CM11 & CM12 it made no effect. I was hearing damn 100-150 Hz bass sound instead of 50-60 Hz.
Can somebody test and report please.

Tosgaba said:
Does this make the bass sound same as it was on the other phones?
Because on my XT1032 running CM11 & CM12 it made no effect. I was hearing damn 100-150 Hz bass sound instead of 50-60 Hz.
Can somebody test and report please.
Click to expand...
Click to collapse
Hold on. I'll test here and fix if i can. Btw, how do you measure that frequency?

I distinguish that frequencies because of audio enthusiasm
That would be great if you can find a solution.

Tested the mod but again not satisfied with the bass sound.
The good old DSP Manager still rocks on my Sammy GT-I5500

Oppo Developed Lollipop!

Apparently Oppo is trying a new approach with software, and have recently released a beta that people can sign up for to try Lollipop, made by Oppo, for their devices! Check it out at http://www.oppoforums.com/threads/would-you-like-to-have-a-taste-of-lollipop-on-your-find-7.25945/ .
I haven't gotten it yet, so no word on performance, battery life and the lot, but it does support Unified Storage, so that's a good thing!

There was a leaked link which I was lucky enough to download and its dam good .with oppo camera and max audio its would be a dream rom

Users with the newer screen is still having problem with installing that version.

Hey find7touchpad
Maybe you might consider sharing your link. Thanks in advance

Oppo Camera & Maxxaudio port
find7touchpad said:
There was a leaked link which I was lucky enough to download and its dam good .with oppo camera and max audio its would be a dream rom
Click to expand...
Click to collapse
Hey, i can tell you that the dream came true I have installed the Maxxaudio and Oppo camera ported on CM12 and it works great on this AOSP build on my Find 7. You can dl them in these threads:
Maxxaudio: http://forum.xda-developers.com/oneplus-one/themes-apps/app-05q-maxxaudio-lib-t3026967
Oppo Camera: http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
Enjoy

metallives81 said:
Hey, i can tell you that the dream came true I have installed the Maxxaudio and Oppo camera ported on CM12 and it works great on this AOSP build on my Find 7. You can dl them in these threads:
Maxxaudio: http://forum.xda-developers.com/oneplus-one/themes-apps/app-05q-maxxaudio-lib-t3026967
Oppo Camera: http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
Enjoy
Click to expand...
Click to collapse
I can't get the camera to install ,fails every time.I have root as well and the maxx audio installed but don't really think its working

find7touchpad said:
I can't get the camera to install ,fails every time.I have root as well and the maxx audio installed but don't really think its working
Click to expand...
Click to collapse
Both are working for me and I just downloaded the Apks / plugins and installed as normal app. I am not rooted, and i flashed the rom with the Oppo recovery as well. Any idea what is going wrong for you...

metallives81 said:
Both are working for me and I just downloaded the Apks / plugins and installed as normal app. I am not rooted, and i flashed the rom with the Oppo recovery as well. Any idea what is going wrong for you...
Click to expand...
Click to collapse
Don't know but my maxx audio has the full setup

find7touchpad said:
Don't know but my maxx audio has the full setup
Click to expand...
Click to collapse
You're right ... Wich version did you installed? Mine is V3, the first in the post. I tried the other V4 but same result.
I think this is because i couldn't flash the ZIP directly via the recovery it says "installation failed". So i have extracted the ZIP file and run the APK in. It must be a partial installation via this way.

Finally i installed TWRP and rooted the device now I can flash by the recovery and it is good:
Sent from my FIND7 using XDA Free mobile app

Is there a kernel that works with this lollipop release i want to tweak some voltages & mhz for better battery

The public beta version has been released:
http://www.oppoforums.com/threads/find-7-7a-aosp-v1-0-beta-lollipop-based.26375/

metallives81 said:
Both are working for me and I just downloaded the Apks / plugins and installed as normal app. I am not rooted, and i flashed the rom with the Oppo recovery as well. Any idea what is going wrong for you...
Click to expand...
Click to collapse
where have you found the plugins for the camera? could you provide a link pls?

znarf2369 said:
where have you found the plugins for the camera? could you provide a link pls?
Click to expand...
Click to collapse
Here:
https://drive.google.com/folderview?id=0B5x77DcrweYzMThlbWdXQ1EzMFE&usp=sharing

I got the camera installed and went with viper because even with maxxaudio it sounded tinny.
Had to full wipe and reflash to get all working .
Xposed is working fine as well.

Tap to Wake
Hi have you figured out how to enable tap to wake feature in this rom.
metallives81 said:
Hey, i can tell you that the dream came true I have installed the Maxxaudio and Oppo camera ported on CM12 and it works great on this AOSP build on my Find 7. You can dl them in these threads:
Maxxaudio: http://forum.xda-developers.com/oneplus-one/themes-apps/app-05q-maxxaudio-lib-t3026967
Oppo Camera: http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
Enjoy
Click to expand...
Click to collapse

A stable Lollipop version (COS 2.1.3i) will be realased at the end of the week (probably today) :
http://community.oppo.com/en/forum.php?mod=viewthread&tid=30105&extra=
Stay tuned...

the newest Find 7 Spectrum AOSP ROM is here, based on Lollipop 5.1.1, has MaxxAudio and COS Camera built in, try it out
community.oppo.com/en/forum.php?mod=viewthread&tid=42690&extra=

Zeus Hai said:
the newest Find 7 Spectrum AOSP ROM is here, based on Lollipop 5.1.1, has MaxxAudio and COS Camera built in, try it out
community.oppo.com/en/forum.php?mod=viewthread&tid=42690&extra=
Click to expand...
Click to collapse
Just saw that this morning! I'll be trying it out after university today.
Post any comments about it when you try- I'm interested to see how stable this build is.

BG64 said:
Just saw that this morning! I'll be trying it out after university today.
Post any comments about it when you try- I'm interested to see how stable this build is.
Click to expand...
Click to collapse
It's fast and smooth, no bloatware, good memory management, apps dont get killed.
- However, some users reported connectivity issues in China.
- When using non-English language, some apps may FC.
- No 4K recording, No Ultra HD mode on Camera.
I've had a quick tour of it, everything seems good, no problem for me so far

[Soundmod] How to install SwanSong (Viper4Arise) on Moto G4 Plus

Please read this post in detail to know all the details about viper4arise and the great team behind A.R.I.S.E
Sound Systems™ (Auditory Research in Sound Enhancement™ ).
https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
I have installed SwanSong and the sound is amazing. SwanSong have an aroma interface during the installation in TWRP and it will be easy for you to install it with all the guides inside the installer. Here are the steps I have done to install it (Thanks to @tywinlannister).
1. Install the BusyBox app and also install BusyBox inside it.
2. Set SELinux to be permissive. (This is important, but you can do it during the installation of SwanSong).
3. Download Arise Sound Systems zip from the link https://www.androidfilehost.com/?w=files&flid=151719
(Click Aroma & look for ARISE+Deuteronomy+X.XX+Modular+AROMA+Installer.zip )
4. Reboot to TWRP and flash the downloaded file. Aroma will start and guide you through the installation process. (There will be many number of modules which will make you confused as to whether it is needed or not. Refer the below recommended setup to get the best experience).
4. Reboot to system.
5. Configure the mods.
6. Reboot again.
This is the recommended setup from the developer itself while flashing SwanSong in Aroma. (Thanks to guitardedhero).
I would recommend Core (mandatory, if not already installed), ViPER4Arise™ 2.5.0.5, Profiles, Arkamys™, ICEsound™, Skip Config and Preset, MusicFX (unless you know it's already installed, this script will leave an existing MusicFX installation intact and end, just in case), permissive (do not, if Enforcing Mode is preferred), Repair SD Card Permissions (allow up to 3-5 minutes of additional time for this script).
Don't flash deep buffer unless you absolutely need to. It's a last resort to get streaming apps to process and should never be flashed as part of your normal installation unless it's been found from flashing previous ARISE version that it's necessary on your device.
Once booted:
Android Settings > Apps > Menu > Show System > Arkamys > Enable Phone Permissions
Android Settings > Apps > Menu > Show System > ViPER4Arise > Enable Storage Permissions
Open ViPER4Arise™ and select Audiophile™ X profile from the Load Effect Profile option in Menu.
On displayed output tab:
Master Power > Off
Master Power > On
Menu > Device Status
Should show Enabled, Normal, and Processing: Yes (at least during audio playback for some scenarios)
If you want to select ViPER4Arise™ through a media player's Equalizer option (not necessary, recommended for users that prefer to get to ViPER4Arise™ through a media player rather than launch the app from Recents or App Drawer):
Android Settings > Apps > Menu > Show System > MusicFX > Disable
Reboot for good measure.
Hope it will help for you. If anything bad happens or you want to uninstall viper, just dirty flash your rom (only wipe cache and dalvik) and everything will be good.
Please note that the selinux mode shall be set to permissive for viper4arise to work. If the selinux mode will not stick to permissive, you may need to disable inbuilt root (if there) and flash latest supersu and then everything will be fine.
There will be a lot of modules during the aroma installation which you can skip (Toolkit, Dolby Plus, Dolby Atmos etc) if it is not mentioned in the recommended setup. Its your choice. Enjoy a crystal clear sound from the great developers.
:good:
NB: I hope I have covered everything that needs to know. Sorry for my bad english and errors if any. I was always a fan of viper4android and been using it for last 3 years and viper always made the music much better to my ears. My only intention is to help others who may be confused with all those modules which will come during the installation of this massive all-in-one package.

Hey! First of all, thank you very much for this great guide. I've followed your instructions, but it seems like I'm experiencing some kind of lag when changing songs. It's like the effects needs to catch up for 1 or 2 seconds after changing songs.. I have done everything mentioned in the guide, and I'm using Spotify, by the way. Any help is appreciated

Lankern98 said:
Hey! First of all, thank you very much for this great guide. I've followed your instructions, but it seems like I'm experiencing some kind of lag when changing songs. It's like the effects needs to catch up for 1 or 2 seconds after changing songs.. I have done everything mentioned in the guide, and I'm using Spotify, by the way. Any help is appreciated
Click to expand...
Click to collapse
I think that your problem with lag is caused by an ondemand-governor or a governor, which set the mhz of cores too low for battery-saving features or whatever.
Which rom are you on. Are you using any battery saving tweaks (for viper with super audio quality driver, i think, need 2 cores on with 600mhz the minimum for non-stuttering sound-processing).
Either setting the governor to interactive or manually adjusting the lower CPU speeds may solve your problem.

Perfect!
My long wait to have an audio mod on stock N ends here.. Thanks for the wonderful share.

krossifix said:
Perfect!
My long wait to have an audio mod on stock N ends here.. Thanks for the wonderful share.
Click to expand...
Click to collapse
Always happy to help :good:

Nothing came....Already installed viper4android does it affect this package??

naveen135 said:
Nothing came....Already installed viper4android does it affect this package??
Click to expand...
Click to collapse
This is the latest version of viper4android. If any other sound mod is installed (including old viper), it should be removed by dirty flashing your rom and then proceed with this.

nazim7 said:
I think that your problem with lag is caused by an ondemand-governor or a governor, which set the mhz of cores too low for battery-saving features or whatever.
Which rom are you on. Are you using any battery saving tweaks (for viper with super audio quality driver, i think, need 2 cores on with 600mhz the minimum for non-stuttering sound-processing).
Either setting the governor to interactive or manually adjusting the lower CPU speeds may solve your problem.
Click to expand...
Click to collapse
Hey again!
I'm running RR 5.8.2 [09/03 update], and no, I'm not using any type of battery-saving tweaks. With Viper4Arise disabled, I still experience the lag. Check the screenshots for the governor setting i set inside the EX Kernel Manager app. Any ideas on how to further troubleshoot/fix this?

Lankern98 said:
Hey again!
I'm running RR 5.8.2 [09/03 update], and no, I'm not using any type of battery-saving tweaks. With Viper4Arise disabled, I still experience the lag. Check the screenshots for the governor setting i set inside the EX Kernel Manager app. Any ideas on how to further troubleshoot/fix this?
Click to expand...
Click to collapse
Thanks for the screenshots. I have used viper in stock nougat and lineage oms, I haven't faced any kind of lags in these. Maybe it is specific to RR rom.
Or you can check with the viper installation; start fresh and install only core and viper4 arise(skip all other modules) and check if there is any lags. If there is still lag, you will have to switch the rom. If there is no lag, try installing the modules one by one until you find which module is causing the lag and avoid using it.

nazim7 said:
Thanks for the screenshots. I have used viper in stock nougat and lineage oms, I haven't faced any kind of lags in these. Maybe it is specific to RR rom.
Or you can check with the viper installation; start fresh and install only core and viper4 arise(skip all other modules) and check if there is any lags. If there is still lag, you will have to switch the rom. If there is no lag, try installing the modules one by one until you find which module is causing the lag and avoid using it.
Click to expand...
Click to collapse
Okay, so I've done some troubleshooting for the past 30 minutes.. It seems like it is the ICEsound™ that is causing the lag for some reason. Everything else seems to work, and thank you again for your help!

Doesnt work while using play music. Works with YouTube, though.
Noticed the "Processing" is set to No while on play music and to Yes while on YouTube. Help?

radichification said:
Doesnt work while using play music. Works with YouTube, though.
Noticed the "Processing" is set to No while on play music and to Yes while on YouTube. Help?
Click to expand...
Click to collapse
Which rom you are on. Try disabling the audiofx or music fx in apps(check show system apps in options ) and reboot. It will work then.

nazim7 said:
Which rom you are on. Try disabling the audiofx or music fx in apps(check show system apps in options ) and reboot. It will work then.
Click to expand...
Click to collapse
I'm on Lineage OMS. Already disabled both and rebooted. Still Processing: No

radichification said:
I'm on Lineage OMS. Already disabled both and rebooted. Still Processing: No
Click to expand...
Click to collapse
Do you have busybox installed, give root permissions "always" , selinux mode set to permissive. I was on lineage OMS before and viper was working, but I didn't tried google play music. Can you try in any other player and reply back.

nazim7 said:
Do you have busybox installed, give root permissions "always" , selinux mode set to permissive. I was on lineage OMS before and viper was working, but I didn't tried google play music. Can you try in any other player and reply back.
Click to expand...
Click to collapse
Yes I followed your guide step by step. So unfortunate

radichification said:
Yes I followed your guide step by step. So unfortunate
Click to expand...
Click to collapse
Sometimes, Viper stops processing after plugging in earbuds, but it will start processing after a reboot with the earbuds plugged in. Check if this is what happening to you. If still not processing, try to freeze icesound service in system apps. It can also mess up with some roms. There is a minor glitch somewhere, hopefully we will find it.

Thanks Nazim7 for this awesome guide!!
Viper screams on my phone and audio quality is improved drastically....u can feel the thump and bass!!!
Some people reported that processing was : no...I faced the same issue...What I did was plugged in earphones -- restarted phone --- make sure selinux set to permissive before restarting...
Go to viper4arise settimgs and set fx to compatible...then play song ..

nazim7 said:
This is the latest version of viper4android. If any other sound mod is installed (including old viper), it should be removed by dirty flashing your rom and then proceed with this.
Click to expand...
Click to collapse
Thanks!!!!It worked

naveen135 said:
Thanks!!!!It worked
Click to expand...
Click to collapse
Glad to know that it worked for you. Enjoy..

help
i'm on stock rom and elemental x kernel, unable to install busybox and after installing viper, in driver status everything says 'no'. Please help.