Develop Bugs

[Q] Custom recovery for OPPO Find 7 (X9077)

Any custom recovery for OPPO Find 7 (X9077)?

Not yet.... Waiting too...

ultramag69 said:
Not yet.... Waiting too...
Click to expand...
Click to collapse
How long? Im so anxious

We are all in the same boat, I'm worried to do anything before I backup, I wonder which recovery will be first, we should take bets, twrp cwm phils

bobbydigital222 said:
We are all in the same boat, I'm worried to do anything before I backup, I wonder which recovery will be first, we should take bets, twrp cwm phils
Click to expand...
Click to collapse
Bet on the TWRP

Depends if the devs have/get this device.... The 7A came out first and a lot of people got that. No point getting a 2K screen for the same phone....

Cracked stock recovery (need test)
https://mega.co.nz/#!tMEFRKQY!aDVsAP-4axXJy803uAvlsmMG1kB6n9FAFRsqoW5oX2A
Here another recovery: http://bbs.myoppo.com/thread-3321328-1-1.html

The BBS one is the stock.
where did you found the cracked recovery?

darthjedyk said:
The BBS one is the stock.
where did you found the cracked recovery?
Click to expand...
Click to collapse
Some where on BBS (I lost link)

QHD Find 7s are just now becoming available to developers in the West (where most of the people that do recovery work are).
I expect Dees_Troy will have at least temporary access to work on TWRP sometime in the next few weeks. Not exactly sure...

TWRP from Russian forums (http://4pda.ru/forum/index.php?s=&showtopic=451598&view=findpost&p=32346084):
https://mega.co.nz/#!gF0GhBzT!HGaWCcQfqr_ns2z7ZEIeeF-0KvXFliEOAFZ_Z-wHcdw

Thanks kojanhq.
tested by you?

Well tested and works!
Only half screen but it appear and work great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KulayOS ROM installed with succes
http://forum.xda-developers.com/showthread.php?t=2789828

After you install twrp you can flash any 7a rom?

bobbydigital222 said:
After you install twrp you can flash any 7a rom?
Click to expand...
Click to collapse
I installed CM 11, but when you reboot no bootanimation and when you are on welcome screen you "can choose language" but don't see anything.
The only rom that works at the moment is the KulayOS ROM from trantums

darthjedyk said:
I installed CM 11, but when you reboot no bootanimation and when you are on welcome screen you "can choose language" but don't see anything.
The only rom that works at the moment is the KulayOS ROM from trantums
Click to expand...
Click to collapse
Is there any issues with kulayos rom?

bobbydigital222 said:
Is there any issues with kulayos rom?
Click to expand...
Click to collapse
Nope, everthing is working
4g, bluetooth, wifi...

LINKS for recovey rom and i can root FInd 7 with it ?
darthjedyk said:
Nope, everthing is working
4g, bluetooth, wifi...
Click to expand...
Click to collapse
please tell where are the links
and can this recovery rom be used to ROOT FIND 7 ?
or there is separate software for it

please really need it

rayQ111 said:
please really need it
Click to expand...
Click to collapse
Yes, you can download http://download.chainfire.eu/396/SuperSU/ and flash it with TWRP

Cant flash TWRP

Hey guys I'm kinda new to Android I've had a chappy phone and now an LG g pad after attempting root about a dozen times I finally managed to get it root now I am trying to get TWRP to backup the tablet and change the boot animation later but every time I tried on my pc it would fail so I installed flashify and tried with that I then I got a boot error saying security issues. The tablet stills boots but I believe the problem is the locked boot loader. Thanks for any help offered.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Look at this thread where some options for flashing TWRP are discussed: http://forum.xda-developers.com/lg-g-pad-83/help/recovery-mode-t2880087

Okay thanks ill check it out

Btw i think my boot loader is locked will this affect it?

Thanks

rooing problems
Joshhi said:
Btw i think my boot loader is locked will this affect it?
Click to expand...
Click to collapse
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!

yojimboj said:
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
Click to expand...
Click to collapse
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up

Joshhi said:
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Click to expand...
Click to collapse
Will be good if you share how you doit, becouse i have a same problem. Tnx

adler123 said:
Will be good if you share how you doit, becouse i have a same problem. Tnx
Click to expand...
Click to collapse
Do what? Unbricked it or flashed twrp?

Joshhi said:
Do what? Unbricked it or flashed twrp?
Click to expand...
Click to collapse
flashed twrp to v50020d

atomicblue said:
flashed twrp to v50020d
Click to expand...
Click to collapse
I believe it was this
Further in the thread they tell you that you have to change the command from v500-20a to d
http://forum.xda-developers.com/showthread.php?t=2698267

I also think youll have to flash the latest version of twrp from a zip manually

[FOUND SRS ROOT TESTED + SS] SM-N910A NK3 Update

So recently we received the NK3 update on the AT&T Note 4 and I looked on SRS Root's website and found that that our model the SM-N910A with the exact build number AUCU1BNK3 <-- aka the NK3 update apparently has been tested or else I don't think it would be on this list. I will try this when I get home. If it works I'll let you guys know and provide Screen Shots if it doesn't then ignore the SM-N910A NK3 build on SRS Root's list.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

On the title I meant to add I think like so [ I THINK I, FOUND SRS ROOT TESTED + SS] SM-N910A NK3 Update

Techinstein said:
So recently we received the NK3 update on the AT&T Note 4 and I looked on SRS Root's website and found that that our model the SM-N910A with the exact build number AUCU1BNK3 <-- aka the NK3 update apparently has been tested or else I don't think it would be on this list. I will try this when I get home. If it works I'll let you guys know and provide Screen Shots if it doesn't then ignore the SM-N910A NK3 build on SRS Root's list.
Click to expand...
Click to collapse
Any news on if this does indeed root it.

looks too good to be true…
keep your fingers crossed…

icexshinigami said:
looks too good to be true…
keep your fingers crossed…
Click to expand...
Click to collapse
They posted they had root for our phone on twitter a while back. I tried it, everything pans out and says its complete. But no root when the phone reboots.
another dead end.

tyiphius said:
They posted they had root for our phone on twitter a while back. I tried it, everything pans out and says its complete. But no root when the phone reboots.
another dead end.
Click to expand...
Click to collapse
Did you try it with the new update from AT&T?

What method was used to root our note 4. I like to give it a shoot

brittoking said:
Did you try it with the new update from AT&T?
Click to expand...
Click to collapse
I havent. SRSROOT hasn't been updated in a while and even on their website it says they only support up to 4.2 jellybean. I went on they're twitter and even asked how they rooted and if they had a confirmed rooted note 4. Of course I never got a response.

nativesmiley said:
What method was used to root our note 4. I like to give it a shoot
Click to expand...
Click to collapse
There's no method yet

There is no method for root for the N910A as of yet. That has been there for awhile and obviously their compiled list is inaccurate.

tyiphius said:
They posted they had root for our phone on twitter a while back. I tried it, everything pans out and says its complete. But no root when the phone reboots.
another dead end.
Click to expand...
Click to collapse
Yea as @tyiphius says it says it roots successfully and completes the process but does not work this thread can be closed now we know it doesnt work.

Looks like NOBODY will ever root N910A nor unlock its boot loader

Stock Rom Stripped of Bloatware from Samsung Repair Center

I recently got my S6 back from Samsung. They untripped knox, and installed a very slim rom without any of the sprint bloatware, and no sprint splash screen. Is there some way I can back up this rom to be able to flash it in odin if/when I need to?
Thanks!

TWRP
bert1983 said:
I recently got my S6 back from Samsung. They untripped knox, and installed a very slim rom without any of the sprint bloatware, and no sprint splash screen. Is there some way I can back up this rom to be able to flash it in odin if/when I need to?
Thanks!
Click to expand...
Click to collapse
You can back up everything if you flash TWRP recovery and select the backup option it comes in hand but other than that i dont believe you can do it without tripping Knox again

Thanks for the reply, that's unfortunate news. I really don't feel like tripping Knox since I would like samsung pay to continue working.

bert1983 said:
Thanks for the reply, that's unfortunate news. I really don't feel like tripping Knox since I would like samsung pay to continue working.
Click to expand...
Click to collapse
You can try ADB Backup. A good set of instructions can be found at:
http://forum.xda-developers.com/galaxy-nexus/general/guide-phone-backup-unlock-root-t1420351
No guarantee that this will work, but it should not trip Knox.

Please post a system dump of this b3fore you do anything. PLEASE
Sent from my SM-G925P using Tapatalk

Is it oi1 build ? Ive sent plenty phones back for warranty and samsung never did that before . Trip knox , so what? Samsung warrantys phones like that all the time . Just tell them you took it to the samsung experience shop at "BestBuy" and they tried to flash the operating system to get the phone working properly again. Id tell them it kept rebooting after you updated it through wifi to 5.1.1 . Youll never have an issue with them if you explain it to them that way . Give us a new build lol

bert1983 said:
They untripped knox....
Click to expand...
Click to collapse
That's the real goal there....

OK I'll work on it this week. I don't want to not be able to use the Samsung pay feature though

I am curious if its the same build number as mine, I have this screenshot so tell me is yours the same or different? Mine is Stock Sprint
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

MindTrix said:
I am curious if its the same build number as mine, I have this screenshot so tell me is yours the same or different? Mine is Stock Sprint
Click to expand...
Click to collapse
That's the same build I have after updating my device. Have you had any luck rooting yours yet?
Sent from my SM-G920P using Tapatalk

gimmeitorilltell said:
That's the same build I have after updating my device. Have you had any luck rooting yours yet?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
I have yet to Root the phone, been waiting and think I will try soon, as I might not need Samsung Pay, been playing with Google 's " Android Pay " not sure what if I will even use these services, I might just root now... LOL

[S] xPosed Framework - Lollipop 5.1.1. stock

EDIT: Thanks to Mr.Bola and Grigaraz for linking the solutions to this problem
Xposed for Lollipop 5.1.1. Samsung Stock
It may cause a brick of your phone, so read CAREFULLY the guide lines, worked for me, wait approx 5 minutes during reboot after flashing the file (it takes a bit)
I've successfully rooted my device, but when I tried to install xPosed Framework I've got this error message:
It reads "xPosed is not (yet) compatible with Android SDK 22 or with you processor architecture (armeabi-v7a).
CANNOT LINK EXECUTABLE DEPENDENCIES: library "libdvm.so" not found
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I used to have xPosed Framework on KitKat, did something happen in the upgrade to Lollipop?
Click to expand...
Click to collapse

daniele_veri said:
I've successfully rooted my device, but when I tried to install xPosed Framework I've got this error message:
I used to have xPosed Framework on KitKat, did something happen in the upgrade to Lollipop?
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=3034811

daniele_veri said:
I've successfully rooted my device, but when I tried to install xPosed Framework I've got this error message:
I used to have xPosed Framework on KitKat, did something happen in the upgrade to Lollipop?
Click to expand...
Click to collapse
It works only this version (samsung 5.1.1) http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Do not forget to install busybox. without it, the device is incredibly slow.

grigaraz said:
It works only this version (samsung 5.1.1) http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
yes this one works.thanks.
Sent from my SM-N750 using Tapatalk

Thanks!
Thanks for the quick replies, works fine for me, I modified the post so anyone can quick access to xPosed

daniele_veri said:
Thanks for the quick replies, works fine for me, I modified the post so anyone can quick access to xPosed
Click to expand...
Click to collapse
it is not working for me
will you plz elaborate

grigaraz said:
It works only this version (samsung 5.1.1) http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Do not forget to install busybox. without it, the device is incredibly slow.
Click to expand...
Click to collapse
For Galaxy note 3 neo (SM-N7505) it is necessary to install sdk22-arm64 o sdk-arm????
Thanks

bodyzen said:
For Galaxy note 3 neo (SM-N7505) it is necessary to install sdk22-arm64 o sdk-arm????
Thanks
Click to expand...
Click to collapse
Sdk22-arm version. Cpu on SM-N7505 is 32 bits.
First boot may take longer.

dew_788 said:
it is not working for me
will you plz elaborate
Click to expand...
Click to collapse
Its fine now

Fr3d_ said:
Sdk22-arm version. Cpu on SM-N7505 is 32 bits.
First boot may take longer.
Click to expand...
Click to collapse
thanks! ))