Edited the file to hopefully get my Gear 2 to work with my VZW LG G3. Now it won't boot. Can't do anything but get into download mode. Can't flash the .tot file because the flash tool thinks it's a GTI9500. Can't figure out where in the .tot file to change the model number with a hex editor.
Anyone have any ideas or help they could throw my way?
On man I feel sorry for you. It's very difficult without custom recovery. You may yet it using the PC software. My suggestion would be to send it for RMA.
Sent from my LG-D855 using XDA Premium 4 mobile app
Related
msg me for the file.
If you can find a way to recover a pmid4311 4.3 inch tablet by polaroid please inform me.
jonahly said:
msg me for the file.
If you can find a way to recover a pmid4311 4.3 inch tablet by polaroid please inform me.
Click to expand...
Click to collapse
Not sure what you mean-these tablets are pretty much unbrickable....please provide more details.
Need more info on what happened I have rhe pmdi 8000 internet tablet ive yet to brick it.
Sent from my SCH-I605 using xda app-developers app
There is an application you can use with the image file to go back to factory defaults. I had to use it myself
Sent from my PMID4311 using xda premium
PMID4311 Image file link to upgrade or repair
Here is the link to the official polaroid page to get the upgrade file and instructions to apply it. It should make it better :^)
http://southerntelecom.com/polaroidsupport/firmware/firmware_guide_pmid4311.html
I tried updating it and it stuck in recovery. when i flash something it says cant find root. how do i fix it?
A little more detail please. Did you root then try OTA update?
You might try flashing stock image, then flash value package using LGFlashTool. Might have to root again. You can find all these in the development section.
Sent from my LG-E980 using xda premium
psal217050 said:
A little more detail please. Did you root then try OTA update?
You might try flashing stock image, then flash value package using LGFlashTool. Might have to root again. You can find all these in the development section.
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
It was already rooted then when i went to update it got stuck in recovery. Now when i try to flash something it gets stuck and says its not rooted but it was before i updated.
Follow the steps in this link to put the factory image back on your phone.
http://forum.xda-developers.com/showthread.php?p=41245720
Then use the value package (update).
http://forum.xda-developers.com/showthread.php?p=43541278
Then phone will be latest version.
Sent from my LG-E980 using xda premium
psal217050 said:
Follow the steps in this link to put the factory image back on your phone.
http://forum.xda-developers.com/showthread.php?p=41245720
Then use the value package (update).
http://forum.xda-developers.com/showthread.php?p=43541278
Then phone will be latest version.
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
I downloaded those files now what do i do?
shaqqq said:
I downloaded those files now what do i do?
Click to expand...
Click to collapse
Read the guide located here.
Once you have everything extracted (the necessary dll, the image, etc), go to the folder where you have LGFLASHTOOL extracted and delete the .dll file that is not the megalock.dll (I forget the name). That will get it to load.
Put your phone into download mode. Follow instructions in the link provided.
Hopefully this will help. Repeat to put the value package on too.
psal217050 said:
Read the guide located here.
Once you have everything extracted (the necessary dll, the image, etc), go to the folder where you have LGFLASHTOOL extracted and delete the .dll file that is not the megalock.dll (I forget the name). That will get it to load.
Put your phone into download mode. Follow instructions in the link provided.
Hopefully this will help. Repeat to put the value package on too.
Click to expand...
Click to collapse
I did it i followed the steps and it worked. Thank you
shaqqq said:
I did it i followed the steps and it worked. Thank you
Click to expand...
Click to collapse
Hit the thanks button mate.
Hello,
i want to extract the KDZ File from the gpad. I extract the kdz and has become a cab file. I want to extract the cab with 7zip or winrar or Expand command, but nothing is working. Any ideas ??
You'll just end up with a dz file that you can't do anything with. The dz file is encrypted by LG. There are tools out there for decrypting them, but they're written for other devices and may not work. I've tried a few and they haven't.
Basically what you can do is go through the process of resetting via KDZ and try to take the files out of the temporary directory before they disappear.
That's where my research into getting into the KDZ has led me.
And what is the way to make a rom based on stock when i cannot extract the stock rom ??
Sent from my LG-V500 using xda app-developers app
budalageo said:
And what is the way to make a rom based on stock when i cannot extract the stock rom ??
Sent from my LG-V500 using xda app-developers app
Click to expand...
Click to collapse
Wait for an OTA.
Please does anyone knows a workaround on the battery low error while flashing kdz file on flashtools..please help me on this matter..i really need it badly..thanks in advance..
help
help please..update on this problem
Doesnt anybody experience thia kind of problem?please if anyone is having the same problem,please share your experience here.coz i read that a lot of people experience this..
Sent from my Q360 using xda app-developers app
Have you tried this link?
http://forum.xda-developers.com/showthread.php?t=2559828
Sent from my Nexus 7 using xda app-developers app
luenboy said:
Please does anyone knows a workaround on the battery low error while flashing kdz file on flashtools..please help me on this matter..i really need it badly..thanks in advance..
Click to expand...
Click to collapse
Workaround:
Make use of your installed/reinstalled recovery system to restore a rom or better nandroid-backup that is already as close as possible to your stock firmware. From there the kdz flasher should work (at least according to my own experience).
This backup worked for me(E986)
http://storagecow.eu/Xda/Users/Anirudhks-OptimusGPro/Stock.rar
xifizurk said:
Workaround:
Make use of your installed/reinstalled recovery system to restore a rom or better nandroid-backup that is already as close as possible to your stock firmware. From there the kdz flasher should work (at least according to my own experience).
This backup worked for me(E986)
http://storagecow.eu/Xda/Users/Anirudhks-OptimusGPro/Stock.rar
Click to expand...
Click to collapse
I would love to see that my phone is at recovery mode..but i cant access it no matter what i do..i've tried the button combination but it fails to load cwm.i already have backup of my entire system on cwm,if only there is a way to install cwm or twrp on this to access recovery.or if there is a way to force this to boot recovery,there will be no problem
Sent from my Q360 using xda app-developers app
jimi_pooh said:
Have you tried this link?
http://forum.xda-developers.com/showthread.php?t=2559828
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Ive already tried that but keeps on getting an error after extracting the kdz file..
Sent from my Q360 using xda app-developers app
luenboy said:
I would love to see that my phone is at recovery mode..but i cant access it no matter what i do..i've tried the button combination but it fails to load cwm.i already have backup of my entire system on cwm,if only there is a way to install cwm or twrp on this to access recovery.or if there is a way to force this to boot recovery,there will be no problem
Sent from my Q360 using xda app-developers app
Click to expand...
Click to collapse
As far i understand yiu wont to go back to stock with kdz flashing. What is the reason? You say u cant get in recovery mode, so u havent the recovery bootloop after installing freegee. Why u wont to flash back to stock? Doesnt your g pro starts?
lg-user45 said:
As far i understand yiu wont to go back to stock with kdz flashing. What is the reason? You say u cant get in recovery mode, so u havent the recovery bootloop after installing freegee. Why u wont to flash back to stock? Doesnt your g pro starts?
Click to expand...
Click to collapse
No,my phone is stuck at lg logo.it wont pass that..and the reason why it is stuck is i flashed a custom kernel for lg e988..after flashing,it wont boot up..i can only access download mode..if i flash it using kdz updater,i kept on getting error extracting file..if i use lg online support,i kept getting battery level low error.if i use the tutorial how to bypass the battery low issue,im getting error after extracting kdz file..
Sent from my Q360 using xda app-developers app
I had 2 times problems with low battery issue. I passed it only changing from Diag mode to emergency.
And also it seems to me that the kdz flashing procedure passes only randomly without battery issue. But only on emergency.
I also reinstalled all drivers to reactivate usb ports. With some patience it should pass through
lg-user45 said:
I had 2 times problems with low battery issue. I passed it only changing from Diag mode to emergency.
And also it seems to me that the kdz flashing procedure passes only randomly without battery issue. But only on emergency.
I also reinstalled all drivers to reactivate usb ports. With some patience it should pass through
Click to expand...
Click to collapse
Still no luck..doe anyone here knows where i can download tot file or anyone knows how to convert .kdz to .oct?
Sent from my Q360 using xda app-developers app
im stuck in twrp and cant get out. tried everything reboot system bootloader and all. battery pulled out but goes to twrp?
even when i restore my backup on phone it get after backup to TWRP.
can someone help me PLEASE. my battery is running low
Charge phone reflash stock firmware via this guide.
http://forum.xda-developers.com/showthread.php?t=2799647
Vivasanti said:
Charge phone reflash stock firmware via this guide.
http://forum.xda-developers.com/showthread.php?t=2799647
Click to expand...
Click to collapse
by flashtool i need ID and password under where i search my country?
how copy megalock to flashtool? cant open megalock
Oh boy.
You have to copy paste megalock thingy in to flashtool folder and override when asked.
That should work
Sent from my LG-D852 using XDA Free mobile app
crzygrmn said:
Oh boy.
You have to copy paste megalock thingy in to flashtool folder and override when asked.
That should work
Sent from my LG-D852 using XDA Free mobile app
Click to expand...
Click to collapse
thanks i am now with flashtool and need dll/tot files. downloading now 1.2GB kdz for that and hope its enough to get my phone to work again
afluitsnakes said:
thanks i am now with flashtool and need dll/tot files. downloading now 1.2GB kdz for that and hope its enough to get my phone to work again
Click to expand...
Click to collapse
Good luck. I f.....d up my phone many times since bump is released. But nothing that can't be fixed with factory tot. Mostly just flash and try. Mostly just no screen on cm or no sound WiFi or Bluetooth on what ever Roms I find.
Sent from my LG-D852 using XDA Free mobile app
Help, the tool says ready but when puul out usb 5seconds and in flashtool doesnt start
afluitsnakes said:
Help, the tool says ready but when puul out usb 5seconds and in flashtool doesnt start
Click to expand...
Click to collapse
Go to device manager and check if there is a "!" Somewhere on the USB ports.
Right click and disable and enable again. Sometimes the USB driver is just stuck
Sent from my LG-D852 using XDA Free mobile app
crzygrmn said:
Go to device manager and check if there is a "!" Somewhere on the USB ports.
Right click and disable and enable again. Sometimes the USB driver is just stuck
Sent from my LG-D852 using XDA Free mobile app
Click to expand...
Click to collapse
its done and says pass.
phone is on blue screen with factory reset status 3. what must i do now?
Restart the phone and click your THANKS button.
It worked downloader older drivers. I wanna thank you al this way cause i was really f..kedupp about it. Thanks people for your great help
What drivers you downloaded, flash tool won't work for me too. And what flash tool did you use? Thanks
Sent from my LG G3 using Tapatalk
I did with drivers 2.11 and lg flash tool the one from age 1 the link they put there. But sometimes the drivers wont work and you must install again
Can you put the links here please?
Sent from my LG G3 using Tapatalk
Problem solved, I was using different PC and it worked