Develop Bugs

[ROM] Red Line by RomChicago [Alpha 2][09.03.12] [JB4.1.1]

As many of you know, my goal with Rom Chicago has always been to build the simplest and most functional rom. The original Rom Chicago was based on tmobile's release products. Red Line is the culmination of everything I have learned so far: It is built from source, based on AOKP, with the intent of making the Rom fully AOSP over time. Thus, some AOKP features have been removed. The goal is SPEED, STABILITY, and FUNCTIONALITY.
When I figure github out finally I'll push the source.
Alpha 1: http://sourceforge.net/projects/romchicago/files/RedLine/RedLineAlpha1.zip/download
Alpha 2: http://sourceforge.net/projects/romchicago/files/RedLine/RedLineAlpha1.zip/download
Flashing Instructions:
Dark side wipe then master and slave's kernel cleanser. Flash.

first...nice ROM...

Keep up the development

Very cool. Thanks

I have to find a WiFi to download this.. been throttled sucks.. damn.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Installation instructions?
Sent from my SGH-T989 using xda premium

blackmamba0730 said:
Installation instructions?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Really, you must not flash much...
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Wipe cache wipe data system 3 times both. And then flash ROM wipe dilvik cache and fix permissions then wait good 15minuts and the. Reboot to cwm recovery and flash gapps then sign in
Sent from my SGH-T989 using xda app-developers app

Does wifi calling work on this ROM?

im not sure about this but i would say no. wifi calling is a tw feature and being that there is no source code yet for our phone all jb roms r aosp which dont support wifi calling

Can you (or someone else that desires to be bothered with it) give a quick overview of which features of AOKP haven't been included?
I assume things like Tablet Mode aren't in this build, or...?

I think asking for flashing instructions are valid for a couple reasons...
You won't have a thread full of asking how to flash
And every dev has a flashing method
Sent from my SAMSUNG-SGH-T989 using xda premium

I flash enough to know every rom has a different flashing method. Thanks for the helpful post btw.
Sent from my SGH-T989 using xda premium

Ehh I'm more a blue line person.....
I haven't checked out the rom yet but. Love the name.
Flashing all roms is basically the same UNLESS otherwise listed with the Posted rom. Clear what normally gets cleared and flash from a fresh install is what I would do. If no special steps are liisted I would assume that no special steps are needed?

No theirs a apk floating around
Sent from my SGH-T989 using xda app-developers app

evanladoux said:
Does wifi calling work on this ROM?
Click to expand...
Click to collapse
AOKP or CM= No Wi-Fi calling
Jedi or Darkside (or any TW ROM)= Wi-Fi calling
So, no Wi-Fi calling is included in this ROM
Sent from JMT Goodness

blackmamba0730 said:
I flash enough to know every rom has a different flashing method. Thanks for the helpful post btw.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
As to not get into a debate on flashing lets be honest...
*wipe/data factory reset(TDJ script if on old CWR 5.0.2.x)Also works with TWRP
*flash rom
*flash gapps(if applicable)AOSP based roms
*wipe cache/dalvik(TDJ script if on old CWR 5.0.2.X) Also works with TWRP
*fix permissions(if applicable)
*reboot
*wait 5-10 minutest to settle
*reboot sign in
I have not seen too many variations of this simple flashing method but I could be wrong :good:

So what works and what doesnt in this rom ?
Sent from my HTC Sensation using xda app-developers app

playya said:
As to not get into a debate on flashing lets be honest...
*wipe/data factory reset(TDJ script if on old CWR 5.0.2.x)Also works with TWRP
*flash rom
*flash gapps(if applicable)AOSP based roms
*wipe cache/dalvik(TDJ script if on old CWR 5.0.2.X) Also works with TWRP
*fix permissions(if applicable)
*reboot
*wait 5-10 minutest to settle
*reboot sign in
I have not seen too many variations of this simple flashing method but I could be wrong :good:
Click to expand...
Click to collapse
Ok
Sent from my SGH-T989 using xda premium

This was a legit question since installation instructions are usually in the OP. My bad.
Sent from my SGH-T989 using xda premium

[PATCH] *** N7105 AT&T and VZN ROMs on your SPH-L900 *** [N7100 works for ADV Users]

[PATCH] *** N7105 AT&T and VZN ROMs on your SPH-L900 *** [N7100 works for ADV Users]
DISCLAIMER: I am not responsible for anything that happens to your phone. You brick it, you fix it!​
This is a combination of work from scrosler and myself. I saw where Scott did this for the VZN GN2 and I modified it to work with the Sprint (SPH-L900) GN2 phones. With this modification your are able to flash N7105 ,AT&T (SGH-I317) and Verizon (SCH-I605) Roms to your phone. Both of those rom bases are confirmed working. Please make sure you do not flash modems/radios for the above listed devices. N7100 INT roms can be flashed using this method ONLY AFTER they have been ported to the N7105/i317 following madmack's guide in this thread. I can confirm that a port I just did of a N7100 rom works as well.
First download the SPH-L900 patch from HEREhttp://www.androidfilehost.com/?fid=9390248398092764671
Download a stock SPH-L900 kernel from the bottom of this thread -- Perseus kernels work as well, found HERE
Choose a N7105, SGH-i317 or SCH-I605 rom that does not install modems/radios - The Swedish N7105XXDLL1 4.1.2 stock rooted base can be found HERE
Follow the steps to flash below:
Reboot into recovery
Make a full backup
Perform a complete wipe (cache, dalvik, factory reset, system) in TWRP
Flash the N7105 or SCH-I605 ROM you downloaded
Flash the SPR_GN2_Config zip file
Flash the Stock or Perseus kernel
Wipe Dalvik/Cache
Reboot System
If you happen to do exactly what I told you not to and flashed a rom that installed a modem/radio and you no longer can get signal, if you didn't brick it and can still boot into download mode, you will need THIS FILE to flash in ODIN to restore factory SPH-L900 specs.
WARNING: Data may or may not work if you do not change the mount point for the DATA partition to the correct one in the updater-script!
.

Holy crap. Nice. The Galaxy Note 2 is truly universal. Thanks for this.

Will this patch work with the miui roms and other aosp roms ? Or strictly the tw roms ? Thanks for the work either way
Sent from my SPH-L900 using Xparent Blue Tapatalk 2

Can we flash CM based ROMS as well? I am curious.
Sent from my SPH-L900 using xda premium

Which roms are safe to flash that doesnt install radios and modems
Sent from my SPH-L900 using xda premium

Epix4G said:
Will this patch work with the miui roms and other aosp roms ? Or strictly the tw roms ? Thanks for the work either way
Sent from my SPH-L900 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
jamice4u said:
Can we flash CM based ROMS as well? I am curious.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
it should work with MIUI Roms based on TW but not AOSP
mackentosh said:
Which roms are safe to flash that doesnt install radios and modems
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
roms that don't have the modem.bin in the zip file. if they do, you can delete it and edit the updater-script and you should be good to go.

Sounds a bit too advanced and risky for me personally but kudos for letting this over for us!

wow!!!!

so firmware means nada for this right? doesn't matter what firmware im on or rom was based in?

unslav3d said:
so firmware means nada for this right? doesn't matter what firmware im on or rom was based in?
Click to expand...
Click to collapse
nope....doesnt matter

t3project said:
nope....doesnt matter
Click to expand...
Click to collapse
Who's gonna be the brave soul to lead us to supremacy
Sent from my SPH-L900 using xda premium

mackentosh said:
Who's gonna be the brave soul to lead us to supremacy
Sent from my SPH-L900 or whatever its called using xda premium
Click to expand...
Click to collapse
jesus man y not flash some htc one roms while we r at it or perhaps some galaxy s 3 ****
skies the limit now!

It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I am the one who got data to work on the port by lbx_mobbin_1 by tweaking the framework)

shiftr182 said:
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I got data to work on the port by lbx_mobbin_1 by tweaking the framework)
Click to expand...
Click to collapse
U sir have balls lol
Sent from my SPH-L900 using xda app-developers app

installed Clean rom for verizon... data and calls work but was getting random android and samsung process errors

chuko303 said:
U sir have balls lol
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
The zip replaces all the csc data with sprints....thats the main difference on these phones. Other than that, they are mostly the same. I have flashed a lot of crap on it from other carriers, so not too worried anymore.

shiftr182 said:
It didnt work with the MIUI they have on ATT. ROM installed fine, but no data. I did the procedure in the OP step by step.
Possible cause - I think that even thought it is Touchwiz based, it uses MIUI base phone and framework (I am the one who got data to work on the port by lbx_mobbin_1 by tweaking the framework)
Click to expand...
Click to collapse
you know, I didn't even think about that. you're probably right about the phone and framework
Sent from my SPH-L900 using xda premium

shiftr182 said:
The zip replaces all the csc data with sprints....thats the main difference on these phones. Other than that, they are mostly the same. I have flashed a lot of crap on it from other carriers, so not too worried anymore.
Click to expand...
Click to collapse
yea and a few libs and some other misc stuff
Sent from my SPH-L900 using xda premium

damnitdave said:
installed Clean rom for verizon... data and calls work but was getting random android and samsung process errors
Click to expand...
Click to collapse
I didn't say it was perfected yet but it works. lol
I got one fc on the stock Swedish rom in the post and never got it again. I modified cleanrom slightly and got the same fc but they never came back
Sent from my SPH-L900 using xda premium

yeah... hasn't poped up yet... thanks for this... keeps the options for roms open

[Q] Upgrading to CyanogenMod Snapshot

Hello, I've worked with custom roms and such before, but only stable things. I installed the Cyanogenmod 10.1 nightly builds, and I've been updating them every day, through TWRP by just flashing the rom, and gapps. A snapshot was just released, and I was wondering if I just do it the same method, or do I have to do the wipe system and all that when you first install a brand new rom. I'm pretty sure I do it the same way, but I just want to make sure there isn't have to be anything else. Better safe than sorry.

Oh my why are you going through all that trouble CyanogenMod has a built in updater all you do is go to about and then CyanogenMod update I believe it will ask you the frequency to check for updates. Make sure you change the options to nightly builds. The phone will notify you when there's an update, after downloading the phone will update itself and all your apps will still be there so you won't need to flash G apps each time.
Sent from my SPH-L710 using xda app-developers app

The process to do this is called a "dirty flash" because you are flashing over what you already have without wiping again. Usually if its an updated version of the same rom you dont need to rewipe everything
However, if you come upon this in some other rom (you're updating to a new version of it), make sure that the OP's instructions dont mention a full flash, because the nature of some big updates WILL require you to do a full wipe and then flash
But for this specific case, just do what the guy above me said
Sent from my PG06100 using xda premium

So... Noob Question coming in 3 2 1.... What is a snapshot? How is it different from a nightly....

Sent from my SCH-R530M using xda app-developers app

belizaire said:
So... Noob Question coming in 3 2 1.... What is a snapshot? How is it different from a nightly....
Click to expand...
Click to collapse
It is a more stable build designation. Still not an official release. Think of it as a monthly nightly!

Thank you!
Sent from my SCH-R530M using xda app-developers app

Help: Flashing Custom Rom t999L

I have the t999L and I was jusy wondering is there a certain way to flash roms on this particular device? Do I need to reflash a kernael or modem, raido after a flash mosy roms on here is for the t999 plz help
Sent from my SGH-T999L using XDA Premium 4 mobile app

You should just be able to flash t-999 ROMs, of course you'll have to do a full wipe before switching to different ROMs. No need to flash kernel or a modem when flashing another ROM. I would stay away from any modems or radios unless it is specifically for the t999L it could brick the phone.
Sent from my SGH-T999 using XDA Premium 4 mobile app

Ok thank you. I wanted to flash cm is that o.k
Sent from my SGH-T999L using XDA Premium 4 mobile app

xxtavarxx said:
Ok thank you. I wanted to flash cm is that o.k
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You should be fine, if your going to flash a custom ROM such as cm, don't forget to download the Google apps. Boot into recovery and do a full wipe, flash ROM then flash Google apps then wipe cache and dalvik cache then reboot.
Sent from my SGH-T999 using XDA Premium 4 mobile app

Why not just read the thread for the T999L?? This and any other questions are already answered for you there. Just scroll down, or click the link in my Sig.
Sent from my SGH-T999L using XDA Premium 4 mobile app

Op probably didn't notice there was a dedicated thread for the T-999L.
Sent from my SGH-T999 using XDA Premium 4 mobile app

I have read it just doest really go into details
Sent from my SGH-T999L using XDA Premium 4 mobile app

xxtavarxx said:
I have read it just doest really go into details
Sent from my SGH-T999L using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ummm. Ok, can you go into detail??
Seriously though, this is what I created the thread for. This is the type of question you could just post there rather than starting another thread. And if there is something missing, or needs further explanation.....well, I kind of need people to let me know. What details exactly were you looking for? And just to show you, this is covered there, I am directly copying just a very small portion of what I have there. If something here is not detailed enough, please mention it in the thread. Thx!
Flashing ROM's To Your T999L
You CAN flash any of the ROM's which are built for the original T999. Pretty much any ROM you find in our Development Section should work on the T999L.
There are, however, just a few small things that you need to remain aware of.
TouchWiz ROM's
Touchwiz ROMs are those based on the Stock, Shipped firmware (The software that came on your device)
If the ROM you choose includes a kernel, everything should work and you have nothing else to worry about.
If it does NOT come with a kernel, you will most likely have to flash either the UVDMD5 kernel, or the UVAMB7 kernel + Modules. More information and both can be found in my Development thread.
Either kernel should work just fine. You are free to choose either one. If you run into issues with one, please share the information so everyone else can benefit, and also to confirm for you that it is a kernel problem.
CM / AOSP / AOKP
Some of these roms will not flash without editing the updater-script. As these roms progress, the devs should add the T999L making this more of a Non-Issue.
If you get a Status 7 error, you will most likely need to follow these steps to make it flashable.
Unzip the ROM.
Browse to and open the updater-script (use Notepad+++
At the top you will see the 'Asserts'
You have 2 options:
1. Remove all of the Assert lines.
2. Add another assert. If the current ones are using d2tmo, add d2ltetmo. If using UVDMD5, add UVAMB7.
Save and rezip the file. (delete the signatures if present)
Flash ROM.

[ROM][OFFICIAL] CyanogenMod 11 Nightly Builds for SGH-I747

CyanogenMod 11 is a free, community built distribution of Android 4.4.X (KitKat) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is the support thread for CM11 on the AT&T Galaxy S3. It's a major work in progress. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Known issues:
Recording video can sometimes result in strange things happening. This includes random reboots or discoloration of the video stream.
Install instructions:
1. Install TWRP Recovery for "d2att".
2. Download your correct; updated bootloader/modem from here, and here.
3. Get the nightly build here.
4. Reboot into recovery and install both.
d2lte is all inclusive. It works with all of the phones listed here.
Google Apps are not included in this ROM. You'll need to find those yourself if you want them. (Or just follow the link below.)
I prefer this.
Follow the changelog!
http://www.cmxlog.com/11/d2lte/

First. Awesome feeling
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Second
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Awesome. Thanks for the new thread. Questions:
For someone coming from CM10 or earlier, is there a special bootloader that one needs to flash prior to flashing CM11?
Has there been an "M" release for d2lte?

Aqua1ung said:
Awesome. Thanks for the new thread. Questions:
For someone coming from CM10 or earlier, is there a special bootloader that one needs to flash prior to flashing CM11?
Has there been an "M" release for d2lte?
Click to expand...
Click to collapse
Updated OP with information regarding updating of bootloader/modem.
d2lte is all inclusive. It works with all of the phones listed here.
Please correct me if I'm wrong.

Will it still work on cwm recovery or do we have to have twrp?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

SeXyStEpH87 said:
Will it still work on cwm recovery or do we have to have twrp?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It will still work with CWM, but TWRP was recently updated to support some more aspects of KitKat, and it's what I use personally, and since I can confirm it works, I wanted to list it as my recommended recovery.

Any compatible kernels with the nightlies? I tried KT747 (3/9/14) and BMS (3/5/14) and they don't seem to work as the com.phone.application stops responding after a reboot from installing the kernel. In particular, I want to know why BMS doesn't work with CM11 because it's based on the same CM kernel and they even have the same Linux kernel (3.4.x) so what went wrong? What makes BMS kernel incompatible with the CM11 ROM? I'm currently using a d2lte build on an SGH-i747M.

GlassRaven said:
Any compatible kernels with the nightlies? I tried KT747 (3/9/14) and BMS (3/5/14) and they don't seem to work as the com.phone.application stops responding after a reboot from installing the kernel. In particular, I want to know why BMS doesn't work with CM11 because it's based on the same CM kernel and they even have the same Linux kernel (3.4.x) so what went wrong? What makes BMS kernel incompatible with the CM11 ROM? I'm currently using a d2lte build on an SGH-i747M.
Click to expand...
Click to collapse
Have you tried the Quantum Kernel?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

GlassRaven said:
Any compatible kernels with the nightlies? I tried KT747 (3/9/14) and BMS (3/5/14) and they don't seem to work as the com.phone.application stops responding after a reboot from installing the kernel. In particular, I want to know why BMS doesn't work with CM11 because it's based on the same CM kernel and they even have the same Linux kernel (3.4.x) so what went wrong? What makes BMS kernel incompatible with the CM11 ROM? I'm currently using a d2lte build on an SGH-i747M.
Click to expand...
Click to collapse
Make sure you're using the latest d2lte nightly. I had the same issue a while ago. Apparently it had something to do with a ramdisk update.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

RJantu said:
Make sure you're using the latest d2lte nightly. I had the same issue a while ago. Apparently it had something to do with a ramdisk update.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
So after the 3-12-14 the incompatibility goes away? I haven't read the logs yet about the ramdisk update.
Sent from my SGH-I747M using Tapatalk

Not sure if you installed the Google Dialer, but that will cause issues with the latest CM builds, so it may not be kernel related but I'm guessing without more info. Check your System/add-on directory and see if you have a Google dialer entry. If yes, in the FAQ it walks you through the steps to take to clear out the dialer, which is basically wipe system, install ROM, install gapps, wipe caches, good to go.
GlassRaven said:
Any compatible kernels with the nightlies? I tried KT747 (3/9/14) and BMS (3/5/14) and they don't seem to work as the com.phone.application stops responding after a reboot from installing the kernel. In particular, I want to know why BMS doesn't work with CM11 because it's based on the same CM kernel and they even have the same Linux kernel (3.4.x) so what went wrong? What makes BMS kernel incompatible with the CM11 ROM? I'm currently using a d2lte build on an SGH-i747M.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

johnhazelwood said:
Not sure if you installed the Google Dialer, but that will cause issues with the latest CM builds, so it may not be kernel related but I'm guessing without more info. Check your System/add-on directory and see if you have a Google dialer entry. If yes, in the FAQ it walks you through the steps to take to clear out the dialer, which is basically wipe system, install ROM, install gapps, wipe caches, good to go.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
There's only the com.android. dialer entry that I've found so far. I've read the procedure that you suggested but I think that's the same thing as installing a new ROM and pushing out the GApps package again which might've included the Google dialer. AFAIK, CM intertwined the Dialer app with the Phone one so removing the Dialer one might not seem ideal..
Sent from my SGH-I747M using Tapatalk

To confirm it's in the add on folder, not the system folder. Meaning you shouldn't have a googledialer file in the add on folder.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Work on SGH-I747M of Telcel México? with 4.3 officialy, of course i need root.
Sent from my SGH-I747M using XDA Premium 4 mobile app

chivas1311 said:
Work on SGH-I747M of Telcel México? with 4.3 officialy, of course i need root.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Read the OP.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Tried to flash the bootloader but it didn't work
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Flashing the bootloader didn't work? How do you know? What did you do? What file did you flash?
SeXyStEpH87 said:
Tried to flash the bootloader but it didn't work
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

I flashed the one for my phone using twrp and it failed
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 09:05 PM ---------- Previous post was at 08:55 PM ----------
I flashed the one for my phone through twrp but it failed
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Anyone install 03/17 with any problems? Seems like a lot of changes were made.
Sent from my S3