Galaxy Trend GT-S7560M Latin America WiFi on CustomROM - Galaxy Ace II Q&A, Help & Troubleshooting

Galaxy Trend GT-S7560M Latin America WiFi on CustomROM - Galaxy Ace II Q&A, Help & Troubleshooting

So it seems that the LA version of the GT-S7560M has a different WiFi module than other GT-S7560M editions (or is it just South America?).
I wonder if there is a way to the developers of this device out there know what exactly is the WiFi module in our devices so they can figure out what to include in their builds to make this work.
Personally I have no idea about Android Hacking, so I wouldn't know what to do, but I know my way around the commandline in OS X and Linux and at work I have access to Windows 7 too, so I could feed you with the specs of my device.
I'm currently running StockROM with Sadman's Kernel (3.0.8 [email protected]) ) #5 PREEMPT Tue Mar 11.....
I tried to run CyanogenMod with Sadman's Kernel, but that just won't boot.
So how could we users post what exactly, to help you developers to figure out what is different with our devices, so maybe together we could make our devices work with your ROMs?
Personally I have a Samsung Trend GT-S7560M from Tigo Bolivia.
Thanks

I support
In america central not working wifi and tried diferents options to make it work the wifi and not working. And it's good that we do see that here ay people around the world and we should look for ways to solve our problems.
Saludos desde Costa Rica.

hhpss said:
So it seems that the LA version of the GT-S7560M has a different WiFi module than other GT-S7560M editions (or is it just South America?).
I wonder if there is a way to the developers of this device out there know what exactly is the WiFi module in our devices so they can figure out what to include in their builds to make this work.
Personally I have no idea about Android Hacking, so I wouldn't know what to do, but I know my way around the commandline in OS X and Linux and at work I have access to Windows 7 too, so I could feed you with the specs of my device.
I'm currently running StockROM with Sadman's Kernel (3.0.8 [email protected]) ) #5 PREEMPT Tue Mar 11.....
I tried to run CyanogenMod with Sadman's Kernel, but that just won't boot.
So how could we users post what exactly, to help you developers to figure out what is different with our devices, so maybe together we could make our devices work with your ROMs?
Personally I have a Samsung Trend GT-S7560M from Tigo Bolivia.
Thanks
Click to expand...
Click to collapse
Youre very lucky that you didn't hard-brick your phone
sadmans kernels are for STOCK and seriously not meant for cm
Sent from my GT-S7560M using XDA Premium 4 mobile app
---------- Post added at 01:57 AM ---------- Previous post was at 01:52 AM ----------
hhpss said:
So it seems that the LA version of the GT-S7560M has a different WiFi module than other GT-S7560M editions (or is it just South America?).
I wonder if there is a way to the developers of this device out there know what exactly is the WiFi module in our devices so they can figure out what to include in their builds to make this work.
Personally I have no idea about Android Hacking, so I wouldn't know what to do, but I know my way around the commandline in OS X and Linux and at work I have access to Windows 7 too, so I could feed you with the specs of my device.
I'm currently running StockROM with Sadman's Kernel (3.0.8 [email protected]) ) #5 PREEMPT Tue Mar 11.....
I tried to run CyanogenMod with Sadman's Kernel, but that just won't boot.
So how could we users post what exactly, to help you developers to figure out what is different with our devices, so maybe together we could make our devices work with your ROMs?
Personally I have a Samsung Trend GT-S7560M from Tigo Bolivia.
Thanks
Click to expand...
Click to collapse
If the wifi problem hardware related is why is the wifi working on my Galaxy Trend (and also some other users).
thats not logic
i have a (maybe) a fix:
my wifi is working, so i can make (after vacation) a nandroid backup (twrp 2.7) of cm10.2, cm11 and PAC 4.4.4 and upload them i hope that it would fix it
Sent from my GT-S7560M using XDA Premium 4 mobile app

Anas Karbila said:
If the wifi problem hardware related is why is the wifi working on my Galaxy Trend (and also some other users).
thats not logic
i have a (maybe) a fix:
my wifi is working, so i can make (after vacation) a nandroid backup (twrp 2.7) of cm10.2, cm11 and PAC 4.4.4 and upload them i hope that it would fix it
Click to expand...
Click to collapse
my question:
How could we read the poper hardware specs of the WiFi module to compare it?
I found this on StackExchange to get NIC id with dmesg, but I can't figure out what could be my wifi module maybe you can:
Code:
[email protected]:/ # dmesg | grep -i lan
<4>[ 2.160213] wlan_status entered
<4>[ 2.160226] (wlan_status) entered GPIO_RESET_VAL=0
<4>[ 2.160678] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c0095620>] (wlan_suspend_gpio_config+0x34/0x7c)
<4>[ 2.160713] [<c0095620>] (wlan_suspend_gpio_config+0x34/0x7c) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.160748] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.161354] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c009562c>] (wlan_suspend_gpio_config+0x40/0x7c)
<4>[ 2.161388] [<c009562c>] (wlan_suspend_gpio_config+0x40/0x7c) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.161421] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.161971] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c0095638>] (wlan_suspend_gpio_config+0x4c/0x7c)
<4>[ 2.162004] [<c0095638>] (wlan_suspend_gpio_config+0x4c/0x7c) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.162036] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.162588] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c0095644>] (wlan_suspend_gpio_config+0x58/0x7c)
<4>[ 2.162621] [<c0095644>] (wlan_suspend_gpio_config+0x58/0x7c) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.162653] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.163204] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c0095650>] (wlan_suspend_gpio_config+0x64/0x7c)
<4>[ 2.163238] [<c0095650>] (wlan_suspend_gpio_config+0x64/0x7c) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.163271] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.163819] [<c022d160>] (gpio_direction_output+0x84/0x154) from [<c00956a4>] (wlan_status+0x3c/0x50)
<4>[ 2.163851] [<c00956a4>] (wlan_status+0x3c/0x50) from [<c0397760>] (msmsdcc_probe+0xaa0/0x120c)
<4>[ 2.164188] register_wlan_status_notify --enter<4>[ 5.785766] ebi_grp_3d_clk is unbalanced
<6>[ 7.709036] SDCC CH 2 : msmsdcc_runtime_suspend WLAN SKIP Suspend
<6>[ 26.796343] wlan_setup_ldo_33v - set by BT : on<6>[ 26.796349] wlan_setup_ldo_33v - old wlan_33v_flag : 0
<6>[ 26.796356] wlan_setup_ldo_33v - new wlan_33v_flag : 2
<4>[ 26.796364] wlan_set_gpio - 109 : on
<6>[ 26.796376] wlan_set_gpio: before (1) :: gpio_get_value = 0
<6>[ 26.796393] wlan_set_gpio: after (1) :: gpio_get_value = 1
<6>[ 28.849579] wlan_setup_ldo_33v - set by BT : off
<6>[ 28.849588] wlan_setup_ldo_33v - old wlan_33v_flag : 2
<6>[ 28.849594] wlan_setup_ldo_33v - new wlan_33v_flag : 0
<4>[ 28.849603] wlan_set_gpio - 109 : off
<6>[ 28.849614] wlan_set_gpio: before (0) :: gpio_get_value = 1
<6>[ 28.849631] wlan_set_gpio: after (0) :: gpio_get_value = 0
<4>[ 34.540856] ath6kl_pm_probe()wlan_setup_power on --enter
<6>[ 34.540869] wlan_setup_ldo_33v - set by Wifi : on
<6>[ 34.540876] wlan_setup_ldo_33v - old wlan_33v_flag : 0
<6>[ 34.540883] wlan_setup_ldo_33v - new wlan_33v_flag : 1
<4>[ 34.540891] wlan_set_gpio - 109 : on
<6>[ 34.540904] wlan_set_gpio: before (1) :: gpio_get_value = 0
<6>[ 34.540919] wlan_set_gpio: after (1) :: gpio_get_value = 1wlan_set_gpio - 33 : on
<6>[ 34.541169] wlan_set_gpio: before (1) :: gpio_get_value = 0
<6>[ 34.541181] wlan_set_gpio: after (1) :: gpio_get_value = 1
<6>[ 34.541273] WLAN: wake lock timeout 0.5 sec...
<4>[ 34.669293] wlan_status entered
<4>[ 34.669314] (wlan_status) entered GPIO_RESET_VAL=1
<6>[ 34.669366] SDCC CH 2 : msmsdcc_runtime_resume WLAN SKIP Resume
<7>[ 34.856439] ath6kl: ath6kl_core_init: name=wlan0 dev=0xd0c35000, ar=0xca0c8ae0
<7>[ 35.600853] ath6kl: ath6kl_target_config_wlan_params() vif_index=1 is not yet added
<3>[ 35.768514] init: cannot find '/system/bin/wlan_tool', disabling 'wlan_tool'
<6>[ 36.329033] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 37.606724] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[ 47.724691] wlan0: no IPv6 routers present
hhpss

Related

Working android linux from Fbettag for our BA's

Screenshot here , it shows the android's UI displayd on a BA
http://picpaste.de/IMG_0093.JPG note:this is from hes phone not mine
he wrote on google groups:
fbetag "Altogether i've put up two tbz2:
- http://evil-packet.org/android/vfat-bootloader-kernel.tbz2
Just copy this to the vfat partition (first partition) on your SD-
Card.
Android will autoboot as soon you plug the card into your BA.
- http://evil-packet.org/android/ext2-android-htc-blueangel-arm.tbz2
Copy it to the ext2 partition (second partition) on your SD-Card.
/bin contains busybox with the according symlinks.
I moved /init (android loader) to /sbin/android.
And i also cross compiled strace and dropbear (which doesn't work
yet).
My /sbin/init is to be customized with your own start-stop stuff.
If you boot Android while your BlueAngel is in it's USB Cradle and
your Linux Computer on the other end got USBnet (so that usb0 appears
on both devices), then my /sbin/init will configure usb0 with
192.168.1.201/24 and start telnetd. The default root password is
"android".
I think this is a fairly good base to start of hacking for this
device Let's do it.
Finally i got some questions google.com couldn't answer me:
- What ANDROID_ environment-variables are there?
- What does it take to make my TS Input Device (tsc2200) available?
Here are several outputs:
--- dmesg ---
<5>Linux version 2.6.21-hh20-omap1 ([email protected]) (gcc version
4.2.3 (Sourcery G++ Lite 2008q1-126)) #5 PREEMPT Sun Aug 3 21:26:21
CEST 2008
<4>CPU: XScale-PXA255 [69052d06] revision 6 (ARMv5TE), cr=0000397f
<4>Machine: HTC Blueangel
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7> DMA zone: 256 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 32512 pages, LIFO batch:7
<7> Normal zone: 0 pages used for memmap
<6>Memory clock: 99.53MHz (*27)
<6>Run Mode clock: 398.13MHz (*4)
<6>Turbo Mode clock: 398.13MHz (*1.0, inactive)
<4>CKEN=0x10a71 CKEN11_USB=0x800
<4>CKEN=0x10a71
<4>CPU0: D VIVT undefined 5 cache
<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
<4>Built 1 zonelists. Total pages: 32512
<5>Kernel command line: root=/dev/mmcblk0p2 rootdelay=10
console=ttyS0,115200n8 console=tty0
<4>PID hash table entries: 512 (order: 9, 2048 bytes)
<4>Console: colour dummy device 80x30
<4>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB = 128MB total
<5>Memory: 126336KB available (2868K code, 502K data, 104K init)
<7>Calibrating delay loop... 397.31 BogoMIPS (lpj=1986560)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<4>android_power_init
<4>android_power_init done
<6>NET: Registered protocol family 16
<6>[ 0.420000] asic3: using irq 108-177 on irq 26
<4>[ 0.430000] Initializing blueangel tsc2200 ssp... done
<4>[ 0.440000] tsc2200_probe: SPI: cr0 0000138f cr1 60000010 sr:
0000f024 it: 00000000 to: 00000000 ps: 00000000
<6>[ 0.470000] Bluetooth: Core ver 2.11
<6>[ 0.470000] NET: Registered protocol family 31
<6>[ 0.480000] Bluetooth: HCI device and connection manager
initialized
<6>[ 0.490000] Bluetooth: HCI socket layer initialized
<6>[ 0.510000] Time: pxa_timer clocksource has been installed.
<4>[ 0.520000] pxa2xx-udc-gpio: Generic driver for GPIO-controlled
PXA2xx UDC
<6>[ 0.530000] NET: Registered protocol family 2
<4>[ 0.640000] IP route cache hash table entries: 1024 (order: 0,
4096 bytes)
<4>[ 0.650000] TCP established hash table entries: 4096 (order: 3,
32768 bytes)
<4>[ 0.660000] TCP bind hash table entries: 4096 (order: 2, 16384
bytes)
<6>[ 0.670000] TCP: Hash tables configured (established 4096 bind
4096)
<6>[ 0.680000] TCP reno registered
<4>[ 0.720000] blueangel_lcd_init
<4>[ 0.720000] Blue Angel Board ID 0x6
<4>[ 0.730000] in blueangel_lcd_probe
<4>[ 0.740000] HTC Blueangel DS1WM driver
<4>[ 0.740000] blueangel_pcmcia_socket_init
<4>[ 0.750000] blueangel_pcmcia_configure_socket
<4>[ 0.760000] Reset:0 ,Vcc:0 ,Flags:0
<4>[ 1.030000] blueangel_pm_init
<4>[ 1.030000] retval=0
<6>[ 1.040000] input: blueangelkb as /class/input/input0
<5>[ 1.050000] Probing PXA Flash 1 at physical address 0x00000000
(32-bit bankwidth)
<4>[ 1.060000] mymtd=00000000
<6>[ 1.070000] ttyS8 at MMIO 0x10800000 (irq = 91) is a DPRAM
<4>[ 1.080000] dpram hwident: 'HTC-DPRAM ASIC P/N:30H80037-00-L'
<5>[ 1.090000] HTC Blueangel Phone Modem Driver
<6>[ 1.090000] PXA CPU frequency change support initialized
<4>[ 1.110000] NetWinder Floating Point Emulator V0.97 (double
precision)
<6>[ 1.120000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat,
Inc.
<6>[ 1.140000] io scheduler noop registered
<6>[ 1.140000] io scheduler anticipatory registered (default)
<6>[ 1.150000] io scheduler deadline registered
<4>[ 1.160000] Corgi Backlight Driver Initialized.
<4>[ 1.170000] Found w3200 at 0x08000000.
<4>[ 1.210000] blueangel_pcmcia_configure_socket
<4>[ 1.220000] Reset:0 ,Vcc:50 ,Flags:0
<4>[ 1.230000] Console: switching to colour frame buffer device
60x53
<6>[ 1.250000] fb0: w100fb frame buffer device
<6>[ 1.400000] TI Calypso / HTC firmware GSM UART line discipline
ver 0.1<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a
FFUART
<6>[ 1.420000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14)
is a BTUART
<6>[ 1.440000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13)
is a STUART
<6>[ 1.450000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is
a HWUART
<6>[ 1.470000] pxa2xx-ir-serial: Initialized
<4>[ 1.480000] RAMDISK driver initialized: 4 RAM disks of 8192K
size 1024 blocksize
<6>[ 1.500000] loop: loaded (max 8 devices)
<6>[ 1.510000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 1.520000] tun: (C) 1999-2004 Max Krasnyansky
<[email protected]>
<4>[ 1.530000] acx: this driver is still EXPERIMENTAL
<4>[ 1.530000] acx: reading README file and/or Craig's HOWTO is
recommended, visit http://acx100.sf.net in case of further questions/
discussion
<7>[ 1.560000] acxcs_init()
<6>[ 1.570000] I2C: i2c-0: PXA I2C adapter
<6>[ 1.580000] pxa2xx_udc: version 4-May-2005
<7>[ 1.600000] DPM: pda_udc: Turning off port
<4>[ 1.600000] ether gadget: using random self ethernet address
<4>[ 1.630000] ether gadget: using random host ethernet address
<4>[ 1.650000] blueangel_pcmcia_configure_socket
<4>[ 1.670000] Reset:1 ,Vcc:50 ,Flags:240
<4>[ 1.680000] blueangel_pcmcia_configure_socket
<4>[ 1.700000] Reset:0 ,Vcc:50 ,Flags:200
<6>[ 1.710000] usb0: Ethernet Gadget, version: May Day 2005
<6>[ 1.730000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-
bulk
<6>[ 1.750000] usb0: MAC 1e:bf:a5:a0:28:2d
<7>[ 1.770000] DPM: pda_udc: Turning on port
<6>[ 1.780000] input: gpio-keys as /class/input/input1
<4>[ 1.780000] pxa_gpiodev_get_value(8)
<4>[ 1.810000] Registering tsc2200 buttons driver
<5>[ 1.820000] pccard: PCMCIA card inserted into slot 0
<5>[ 1.840000] pcmcia: registering new device pcmcia0.0
<7>[ 1.860000] acx_attach()
<7>[ 1.860000] acx_cs_config(0xc0622600)
<6>[ 1.870000] MEMORY WINDOW FOUND!!!
<6>[ 1.880000] requesting Irq...
<4>[ 1.890000] pcmcia: request for exclusive IRQ could not be
fulfilled.
<4>[ 1.920000] pcmcia: the driver needs updating to supported
shared IRQ lines.
<4>[ 1.950000] blueangel_pcmcia_configure_socket
<4>[ 1.960000] Reset:0 ,Vcc:50 ,Flags:200
<4>[ 1.980000] blueangel_pcmcia_configure_socket
<4>[ 1.990000] Reset:0 ,Vcc:50 ,Flags:220
<7>[ 2.050000] RequestConfiguration OK
<4>[ 2.050000] acx: found ACX100-based wireless network card
<7>[ 2.070000] initial debug setting is 0x000A
<6>[ 2.070000] memwinbase=2c000000 memwinsize=4096
<7>[ 2.080000] using IRQ 40
<4>[ 2.110000] ACX radio type 0x0d
<7>[ 2.120000] requesting firmware image 'WLANGEN.BIN'
<4>[ 2.120000] 9<6>input: tsc2200-keys as /class/input/input2
<4>[ 2.150000] tsc2200_ts_probe IRQ: 39
<6>[ 2.170000] input: tsc2200-ts as /class/input/input3
<7>[ 2.190000] sa1100-rtc sa1100-rtc: rtc intf: sysfs
<7>[ 2.190000] sa1100-rtc sa1100-rtc: rtc intf: proc
<7>[ 2.200000] sa1100-rtc sa1100-rtc: rtc intf: dev (254:0)
<6>[ 2.200000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-
rtc as rtc0
<6>[ 2.230000] Driver for 1-wire Dallas network protocol.
<4>[ 2.250000] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
<4>[ 2.280000] blueangel_ds1wm: OWM_EN Low (active)
<6>[ 2.310000] 1-Wire driver for the DS2760 battery monitor chip
- (c) 2004-2005, Szabolcs ..."

can you post the image of Android? ("initrd-android" etc)

its alrdy there mate use the second link to download it , it says "ext2-android-htc-blueangel-arm.tbz2" 32mb file

thanks, i'll try it someday

Tryed, the touch screen doesnt work.

root said:
Tryed, the touch screen doesnt work.
Click to expand...
Click to collapse
Hi,
I'm one of the maintenair of this kernel, last time i look to android, it seem you have to patch the kernel to get the touchscreen working with android.
They do something special. maybe you can try with datas from latest SDK.

Very interested things!
I'm very interesting with this! So, are you working on this? I'll try to make something better but don't known where to start.
Anybody know about extract android's image file in emulator to SD card?
What the android distro it is folllowing? I mean: debian, redhat or anything else.

so what are the cons and pros of using Android instead of WinMo?

The biggest pro here is that you can get away from M$oft and try something new and have a new experiance.

[Q] ad hov network on HTC one v

Hello all.
i got my new HTC One V now and are not able to connect to my "ad hoc network" here.
Even my cheap (previous) mobile was able to do that - the more expensive and more modern "HTC one v" not ?
can't believe what's happening here.
has somebody a solution for me ?
the mobile is already rooted.
Thanks & greetings,
snoopy

Most Android devices can't connect to ad-hoc networks, so your stuck. It's something to do with Android I'm pretty sure. What you can try is programs like virtual router which worked for me, or you can connect it to your pc to get inter while tethered.

Twner said:
Most Android devices can't connect to ad-hoc networks, so your stuck. It's something to do with Android I'm pretty sure. What you can try is programs like virtual router which worked for me, or you can connect it to your pc to get inter while tethered.
Click to expand...
Click to collapse
Thanks for your answer. I don't want to use extra hard-/software for a absolutely normal technology and this ad-hoc network is build up from an "ar.drone v2" - so extra software on a pc wouldn't help me.
i found out, that the "wpa_supplicant" file has to be replaced. now i'm looking for those file for my "HTC one V" with WLAN ad-hoc support.
while connecting to the ad-hoc network the "dmesg" recorded - maybe somebody with more experiance can read this and help me ?
Code:
<6>[ 9503.339416] [WLAN] wl_bss_connect_done succeeded
<6>[ 9503.373565] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 9503.374023] [WLAN] enter dhd_set_multicast_list
<6>[ 9503.397766] [WLAN] STA connect received 1
<6>[ 9503.398162] [WLAN] wl_bss_connect_done succeeded
<4>[ 9503.400238] [WLAN][WRN] wl_android_priv_cmd: Unknown PRIVATE command OK
<4>[ 9503.400238] I=-57
<4>[ 9503.400238] LINKSPEED=65
<4>[ 9503.400238] NOISE=9999
<4>[ 9503.400238] FREQUENCY=0
<4>[ 9503.400238] - ignored
<6>[ 9503.401458] [WLAN] enter dhd_set_multicast_list
<6>[ 9503.669311] [WLAN] power active. ctrl_mask: 0x1
<4>[ 9503.682495] [WLAN][WRN] wl_iw_ioctl: error in cmd=8b1b : not supported
<3>[ 9505.444519] binder: 15942: binder_alloc_buf, no vma
<6>[ 9505.444946] binder: 1601:1779 transaction failed 29201, size 1628-0
<7>[ 9513.597625] wlan0: no IPv6 routers present
<6>[ 9534.143280] [WLAN] <3>CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
<6>[ 9534.148956] [WLAN] DISASSOC received, 90:03:B7:2C:13:A1!, reason:8
<6>[ 9534.150054] [WLAN] <6>[ATS][disconnect][complete]
<6>[ 9534.150482] [WLAN] [wl_iw_event] Link Down,16
<4>[ 9534.151275] link down, call cfg80211_disconnected
<6>[ 9534.184783] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 9534.199981] cfg80211: Calling CRDA for country: US
<6>[ 9534.212738] [WLAN] enter dhd_set_multicast_list
<6>[ 9534.212890] [WLAN] enter dhd_set_multicast_list
<4>[ 9534.244018] [WLAN][WRN] wl_android_priv_cmd: Unknown PRIVATE command OK
<4>[ 9534.244018] L-BUSY
<4>[ 9534.244049] - ignored
<6>[ 9535.358703] [WLAN] <3>CFG80211-ERROR) wl_enable_wapi_auth : wl_enable_wap
i_auth
<4>[ 9535.469421] [WLAN][WRN] wl_android_priv_cmd: Unknown PRIVATE command OK
<4>[ 9535.469421] - ignored

just a question can anyone temme what's this ad hoc network.....
Sent from my One V using xda premium

handryg555 said:
just a question can anyone temme what's this ad hoc network.....
Sent from my One V using xda premium
Click to expand...
Click to collapse
Don't know what "temme" is, but i think this is what you are looking for: "en.wikipedia.org/wiki/Wireless_ad-hoc_network"
Sorry for not writing a link, but this forum is blocking ("After approximately 10 posts, you will be able to post outside links. Thank you for understanding!")

Moved to Q&A. Please ask all questions there.

TeeJay3800 said:
Moved to Q&A. Please ask all questions there.
Click to expand...
Click to collapse
OK. Thread can be closed. Problem solved. Ad hoc network is working now.

Hi
I'm trying to do the same thing with my HTC one v. Can you post have you fixed the problem?
Thanks in advance

snoopy73 said:
OK. Thread can be closed. Problem solved. Ad hoc network is working now.
Click to expand...
Click to collapse
NO! Share the knowledge bro! We're working on getting some of these set up as ad-hoc mesh nodes.
Did you replace/patch wpa supplicant? Has anyone else accomplished this on primoc?

E400-Kernel 3.x

Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx

fergy said:
Regarding http://forum.xda-developers.com/showthread.php?t=2229798&page=8 is OP back?
I was wondering how is possible to make an working kernel from that sources as there is totally wrong setup for L3-E400 board.
Can someone provide dmesg log here? I can bet that 2x2 cannot work here, same as why is problem with registering other devices.
So, let Me explain this (from config)
#1 CONFIG_SENSORS_BMA2X2
is wrong option as E400 have BMA250 triaxial low-g acceleration sensor.
#2 **** with APDS9190 will not work... as E400 have BMC050 6-axis digital e-compass (it is enabled from config, but will not work as addresses is wrong).
#3 CONFIG_BACKLIGHT_RT9396
will not work as E400 have backlight control over BU61800.
#4 vee3 board is not compatible with E0 (E400) board but with M4 (L5) so, 'almost same' configuration will not work on E400 (E0) board without tuning or porting code.
Once again, please, someone who have that Kernel working, please provide dmesg.
Thx
Click to expand...
Click to collapse
So, to reply to Myself:
#1 BMA2x2
<6>[ 1.992438] bma2x2_probe
<6>[ 2.243759] Bosch Sensortec Device not foundi2c error 8063
<4>[ 2.244029] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 2.244374] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 2.244629]
<4>[ 2.244636] <6><><bmm_probe><1174>function entrance
<4>[ 2.245148]
<4>[ 2.245153] <6><><bmm_wakeup><193>waking up the chip...
<4>[ 4.020973]
<4>[ 4.020979] <6><><bmm_wakeup><209>wake up result: fail, tried times: 6
Click to expand...
Click to collapse
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
<4>[ 4.021373] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 4.021903] bmm050: probe of 4-0012 failed with error -5
Click to expand...
Click to collapse
#2 APDS9190:
<6>[ 4.075116] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 4.075329] proximity_apds9190 5-0039: probe error
Click to expand...
Click to collapse
#3 RT9396:
4>[ 0.513224] rt9396 init start
<6>[ 0.513616] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.514189] Registered led device: lcd-backlight
<3>[ 0.514208] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.514679] Registered led device: button-backlight
<3>[ 0.514696] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.515536] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.515883] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.516679] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.517026] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.517964] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.518169] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
Click to expand...
Click to collapse
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx

fergy said:
So, to reply to Myself:
#1 BMA2x2
+BMC050 (as is is BMC http://www.bosch-sensortec.com/en/homepage/products_3/6_axis_sensors_2/ecompass/bmc050_1/bmc050, NOT bmm) :
#2 APDS9190:
#3 RT9396:
Register, but cannot write registers...fail (as actual device is BU61800 and msm's pmic)
.. sooo, please, someone who have that Kernel 'REAL' working with registering all devices (without sensors as OP say's) please provide dmesg from that WORKING Kernel.
Thx
Click to expand...
Click to collapse
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.

tudorsirb said:
try looking at lproj 3.4 kernel on teamhacklg github. it has a e400 defconfig. maybe it's a good starting point for you. http://github.com/teamhacklg. sorry spoke to soon, there's no defconfig.
Click to expand...
Click to collapse
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4

fergy said:
I have right config for board, but as I say above, there is wrong pin configuration, wrong registers, so that must to be fixed if one expect to get sensors working.
Hacklg have config for 2.6 kernel, not for 3.x
In attach is My config for 3.4
Click to expand...
Click to collapse
thank you fergy, just getting back to compiling

hecatae said:
thank you fergy, just getting back to compiling
Click to expand...
Click to collapse
BTW, right registers for L3:
Touch GPIO:
Code:
I2C_SDA 10
I2C_SCL 9
IRQ 39
I2C_SLAVE_ADDR 0x48
Sensor GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
Accel GPIO:
Code:
GPIO_INT 94
GPIO_I2C_SCL 49
GPIO_I2C_SDA 48
I2C_ADDRESS 0x48
Compas GPIO:
Code:
I2C_SCL 49
I2C_SDA 48
GPIO_INT 35
I2C_ADDRESS 0x10
Proxi GPIO:
Code:
I2C_SCL 16
I2C_SDA 30
GPIO_DOUT 17
I2C_ADDRESS 0x44
LDO_NO_VCC 1
Note that You must rearrange voltage @Board-msm7x27a-regulator:
Code:
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n),
EDIT:
As from technical specs, power module must to give right power voltage for specific part of hardware so it can run.
Also, the rest of power registers:
Code:
PCOM_VREG_SMP(smps1, 3, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps2, 4, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps3, 2, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_SMP(smps4, 24, NULL, 2100000, 2100000, 0, -1, 0, 0, 0, 0, s),
PCOM_VREG_LDO(ldo01, 12, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* fergy(from shematics) : <lcd operating at 1.8v: VREG_MSME_1.8V, lcd firmware loader need 3.3v and other functions need 2.8v: VREG_LCD_2.8V> so ldo01 need this change here */
PCOM_VREG_LDO(ldo02, 13, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo04, 50, NULL, 800000, 2850000, 0, -1, 0, 0, 0, 0, n), /* min (800000 -> 2850000) */
PCOM_VREG_LDO(ldo05, 45, NULL, 1200000, 3300000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo06, 51, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0, n), /* min (1200000 -> 3300000) */
PCOM_VREG_LDO(ldo07, 0, NULL, 2600000, 2600000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo08, 9, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo09, 44, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo10, 52, NULL, 2800000, 3000000, 0, -1, 0, 0, 0, 0, p), /* min (2800000 -> 3000000) */
PCOM_VREG_LDO(ldo11, 53, NULL, 1800000, 1800000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo12, 21, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo13, 18, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo14, 16, NULL, 3300000, 3300000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo15, 54, NULL, 1800000, 2850000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo16, 19, NULL, 3000000, 3000000, 0, -1, 0, 0, 0, 0, p), /* NFC 3.0 V */
PCOM_VREG_LDO(ldo17, 56, NULL, 3000000, 3300000, 0, -1, 0, 0, 0, 0, p), /* min (3000000 -> 3300000) */
PCOM_VREG_LDO(ldo18, 11, NULL, 2700000, 2700000, 0, -1, 0, 0, 0, 0, p),
PCOM_VREG_LDO(ldo19, 57, NULL, 1200000, 1800000, 0, -1, 0, 0, 0, 0, p), /* min (1200000 -> 1800000) */
/* not used vreg_ncp */
PCOM_VREG_NCP(ncp, 31, NULL, -1800000, -1800000, 0, 0, 0, 0, 0),
as per old regulato code:
Code:
RT8053_VREG_INIT(LDO1, 1200000, 3300000),
RT8053_VREG_INIT(LDO2, 1200000, 3300000),
RT8053_VREG_INIT(LDO3, 1200000, 3300000),
RT8053_VREG_INIT(LDO4, 800000, 2850000),
RT8053_VREG_INIT(LDO5, 1200000, 3300000),
RT8053_VREG_INIT(DCDC1, 800000, 2300000),

In attachments 7225A pinouts and LCD pinouts....
Enjoy in research.
PS, if You need any help, PM or em[email protected]
Cheers
PS2:
LOG from My Kernel:
Code:
<6>[-----------------------][ 0.000000] Booting Linux on physical CPU 0
<6>[-----------------------][ 0.000000] Initializing cgroup subsys cpu
<5>[-----------------------][ 0.000000] Linux version 3.4.0 ([email protected]) (gcc version 4.4.3 (GCC) ) #48 PREEMPT Wed Oct 23 00:39:38 CEST 2013
<4>[-----------------------][ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d
<4>[-----------------------][ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[-----------------------][ 0.000000] Machine: LG MSM7225AB
<6>[-----------------------][ 0.000000] memory pool 3 (start 26600000 size 1a00000) initialized
<4>[-----------------------][ 0.000000] Memory policy: ECC disabled, Data cache writeback
<1>[-----------------------][ 0.000000] Initialized strongly ordered page successfully
<3>[-----------------------][ 0.000000] smem_find(137, 80): wrong size 64
<3>[-----------------------][ 0.000000] smem_find(137, 72): wrong size 64
<6>[-----------------------][ 0.000000] socinfo_init: v4, id=99, ver=1.1, raw_id=1540, raw_ver=1, hw_plat=2, hw_plat_ver=65536
<6>[-----------------------][ 0.000000] L310 cache controller enabled
<6>[-----------------------][ 0.000000] l2x0: 8 ways, CACHE_ID 0x410054c7, AUX_CTRL 0x00540000, Cache size: 262144 B
<7>[-----------------------][ 0.000000] On node 0 totalpages: 78592
<7>[-----------------------][ 0.000000] free_area_init_node: node 0, pgdat c092474c, node_mem_map c1055800
<7>[-----------------------][ 0.000000] Normal zone: 1436 pages used for memmap
<7>[-----------------------][ 0.000000] Normal zone: 0 pages reserved
<7>[-----------------------][ 0.000000] Normal zone: 77156 pages, LIFO batch:15
<6>[-----------------------][ 0.000000] allocating 1843200 bytes at c15f8000 (17f8000 physical) for fb
<6>[-----------------------][ 0.000000] Initialized persistent memory from 0ff00000-0ff3dffe
<7>[-----------------------][ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[-----------------------][ 0.000000] pcpu-alloc: [0] 0
<4>[-----------------------][ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 77156
<5>[-----------------------][ 0.000000] Kernel command line: androidboot.hardware=e0 lge.rev=rev_12 lge.reboot=reboot uart_console=disable lge.frst=flag3 kcal=000000000000000000 androidboot.emmc=true androidboot.serialno=1e2bf5 androidboot.baseband=msm
<6>[-----------------------][ 0.000000] BOARD: LGE rev_12
<6>[-----------------------][ 0.000000] rebootmode_setup , reboot_mode = 0
<6>[-----------------------][ 0.000000] UART CONSOLE : disable
<6>[-----------------------][ 0.000000] FRST MODE : flag3
<6>[-----------------------][ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[-----------------------][ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[-----------------------][ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.000000] Memory: 205MB 102MB = 307MB total
<5>[-----------------------][ 0.000000] Memory: 297260k/297260k available, 43732k reserved, 0K highmem
<5>[-----------------------][ 0.000000] Virtual kernel memory layout:
<5>[-----------------------][ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[-----------------------][ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[-----------------------][ 0.000000] vmalloc : 0xd5000000 - 0xff000000 ( 672 MB)
<5>[-----------------------][ 0.000000] lowmem : 0xc0000000 - 0xd4d00000 ( 333 MB)
<5>[-----------------------][ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[-----------------------][ 0.000000] .text : 0xc0008000 - 0xc0847368 (8445 kB)
<5>[-----------------------][ 0.000000] .init : 0xc0848000 - 0xc087a000 ( 200 kB)
<5>[-----------------------][ 0.000000] .data : 0xc087a000 - 0xc0940fb0 ( 796 kB)
<5>[-----------------------][ 0.000000] .bss : 0xc0940fd4 - 0xc0b32100 (1989 kB)
<6>[-----------------------][ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[-----------------------][ 0.000000] NR_IRQS:645
<6>[-----------------------][ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
<6>[-----------------------][ 0.000000] Console: colour dummy device 80x30
<6>[-----------------------][ 0.000000] console [tty0] enabled
<6>[-----------------------][ 0.001876] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992)
<6>[-----------------------][ 0.070119] pid_max: default: 32768 minimum: 301
<6>[-----------------------][ 0.070631] Mount-cache hash table entries: 512
<6>[-----------------------][ 0.071753] Initializing cgroup subsys cpuacct
<6>[-----------------------][ 0.071818] Initializing cgroup subsys devices
<6>[-----------------------][ 0.071871] Initializing cgroup subsys freezer
<6>[-----------------------][ 0.071919] Initializing cgroup subsys net_cls
<6>[-----------------------][ 0.072024] CPU: Testing write buffer coherency: ok
<6>[-----------------------][ 0.072586] hw perfevents: enabled with ARMv7 Cortex-A5 PMU driver, 3 counters available
<6>[-----------------------][ 0.072834] Setting up static identity map for 0x7d3118 - 0x7d317c
<6>[-----------------------][ 0.083881] dummy:
<6>[-----------------------][ 0.084523] NET: Registered protocol family 16
<6>[-----------------------][ 0.086551] gpiochip_add: registered GPIOs 0 to 15 on device: generic
<6>[-----------------------][ 0.086748] gpiochip_add: registered GPIOs 16 to 42 on device: generic
<6>[-----------------------][ 0.086933] gpiochip_add: registered GPIOs 43 to 67 on device: generic
<6>[-----------------------][ 0.087176] gpiochip_add: registered GPIOs 68 to 94 on device: generic
<6>[-----------------------][ 0.087364] gpiochip_add: registered GPIOs 95 to 106 on device: generic
<6>[-----------------------][ 0.087549] gpiochip_add: registered GPIOs 107 to 132 on device: generic
<6>[-----------------------][ 0.088831] Shared PLL control available.
<6>[-----------------------][ 0.092576] acpuclk_7627_probe()
<6>[-----------------------][ 0.093818] ACPU running at 600000 KHz
<6>[-----------------------][ 0.093869] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 D4 U0 U1 U2 U4
<6>[-----------------------][ 0.093949] 0 19200 5 1 2400 4 30720 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094026] 1 61440 1 4 7680 4 61440 -1 -1 -1 -1 5 3 4 6
<6>[-----------------------][ 0.094101] 2 122880 1 2 15360 4 61440 -1 1 -1 -1 7 3 4 6
<6>[-----------------------][ 0.094178] 3 245760 1 1 30720 4 61440 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094254] 4 300000 2 4 37500 4 122880 -1 1 -1 -1 7 -1 8 6
<6>[-----------------------][ 0.094331] 5 320000 0 3 40000 4 122880 -1 1 4 -1 7 -1 8 6
<6>[-----------------------][ 0.094408] 6 400000 4 2 50000 4 122880 5 1 4 -1 7 -1 8 9
<6>[-----------------------][ 0.094483] 7 480000 0 2 60000 4 122880 5 2 4 6 -1 -1 8 9
<6>[-----------------------][ 0.094559] 8 600000 2 2 75000 4 160000 5 3 4 6 -1 -1 -1 9
<6>[-----------------------][ 0.094636] 9 800000 4 1 100000 4 200000 7 -1 8 6 -1 -1 -1 -1
<6>[-----------------------][ 0.094703] CPU0: 6 scaling frequencies supported.
<6>[-----------------------][ 0.095214] smps1: 1100 mV normal
<6>[-----------------------][ 0.095743] smps2: 1100 mV normal
<6>[-----------------------][ 0.096164] smps3: 1800 mV normal
<6>[-----------------------][ 0.096599] smps4: 2100 mV normal
<6>[-----------------------][ 0.097064] ldo01: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097509] ldo02: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.097953] ldo03: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.098393] ldo04: 800 <--> 2850 mV normal
<6>[-----------------------][ 0.098834] ldo05: 1200 <--> 3300 mV normal
<6>[-----------------------][ 0.099313] ldo06: 1200 mV normal
<6>[-----------------------][ 0.099759] ldo07: 2600 mV normal
<6>[-----------------------][ 0.100199] ldo08: 2850 mV normal
<6>[-----------------------][ 0.100731] ldo09: 1800 mV normal
<6>[-----------------------][ 0.101181] ldo10: 2800 <--> 3000 mV normal
<6>[-----------------------][ 0.101678] ldo11: 1800 mV normal
<6>[-----------------------][ 0.102103] ldo12: 2850 mV normal
<6>[-----------------------][ 0.102574] ldo13: 2850 mV normal
<6>[-----------------------][ 0.103053] ldo14: 3300 mV normal
<6>[-----------------------][ 0.103509] ldo15: 1800 <--> 2850 mV normal
<6>[-----------------------][ 0.103969] ldo16: 3000 mV normal
<6>[-----------------------][ 0.104403] ldo17: 3000 <--> 3300 mV normal
<6>[-----------------------][ 0.104868] ldo18: 2700 mV normal
<6>[-----------------------][ 0.105323] ldo19: 1200 <--> 1800 mV normal
<6>[-----------------------][ 0.105784] ncp: 1800 mV normal
<6>[-----------------------][ 0.108236] persistent_ram: uncorrectable error in header
<6>[-----------------------][ 0.108313] persistent_ram: no valid data in buffer (sig = 0x00000000)
<6>[-----------------------][ 0.134009] console [ram-1] enabled
<4>[-----------------------][ 0.135923] smps3: Failed to create debugfs directory
<6>[-----------------------][ 0.136394] ebi2_tovis_power_save: on=1
<5>[-----------------------][ 0.141893] Boot Reason = 0x01
<6>[-----------------------][ 0.142263] CRASH LOG START ADDR : 0xcf3e000
<6>[-----------------------][ 0.142609] CRASH LOG END ADDR : 0xcf3efff
<6>[-----------------------][ 0.148831] fs_gfx3d: normal
<6>[-----------------------][ 0.189384] bio: create slab <bio-0> at 0
<6>[-----------------------][ 0.190898] ION heap vmalloc created
<6>[-----------------------][ 0.191329] ION heap camera_preview created at 26600000 with size 1000000
<6>[-----------------------][ 0.191736] ION heap audio created at 27600000 with size 22e000
<6>[-----------------------][ 0.192001] ION heap sf created at 2782e000 with size 7a0000
<5>[-----------------------][ 0.193088] SCSI subsystem initialized
<6>[-----------------------][ 0.193954] usbcore: registered new interface driver usbfs
<6>[-----------------------][ 0.194446] usbcore: registered new interface driver hub
<6>[-----------------------][ 0.195166] usbcore: registered new device driver usb
<6>[-----------------------][ 0.196259] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[-----------------------][ 0.196898] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[-----------------------][ 0.197789] i2c-gpio i2c-gpio.4: using pins 48 (SDA) and 49 (SCL)
<6>[-----------------------][ 0.198544] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[-----------------------][ 0.198966] Linux media interface: v0.10
<6>[-----------------------][ 0.199259] Linux video capture interface: v2.00
<6>[-----------------------][ 0.200178] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[-----------------------][ 0.201623] Bluetooth: Core ver 2.16
<6>[-----------------------][ 0.201926] NET: Registered protocol family 31
<6>[-----------------------][ 0.202276] Bluetooth: HCI device and connection manager initialized
<6>[-----------------------][ 0.202509] Bluetooth: HCI socket layer initialized
<6>[-----------------------][ 0.202861] Bluetooth: L2CAP socket layer initialized
<6>[-----------------------][ 0.203661] Bluetooth: SCO socket layer initialized
<6>[-----------------------][ 0.204669] cfg80211: Calling CRDA to update world regulatory domain
<6>[-----------------------][ 0.206219] Switching to clocksource dg_timer
<6>[-----------------------][ 0.256563] NET: Registered protocol family 2
<6>[-----------------------][ 0.257419] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[-----------------------][ 0.259088] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[-----------------------][ 0.261809] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
<6>[-----------------------][ 0.263358] TCP: Hash tables configured (established 16384 bind 16384)
<6>[-----------------------][ 0.263611] TCP: reno registered
<6>[-----------------------][ 0.264063] UDP hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.264561] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
<6>[-----------------------][ 0.265464] NET: Registered protocol family 1
<6>[-----------------------][ 0.266373] Unpacking initramfs...
<6>[-----------------------][ 0.306193] Freeing initrd memory: 320K
<3>[-----------------------][ 0.313148] Notify: smsm init
<4>[-----------------------][ 0.313904] get_nand_partitions: no flash partition table in shared memory
<6>[-----------------------][ 0.321429] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[-----------------------][ 0.325761] rpcrouter: Server create rejected, version = 0, program = 3000003b
<6>[-----------------------][ 0.330666] [adsp.c:adsp_init] rs00000000 -- 0
<6>[-----------------------][ 0.332506] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[-----------------------][ 0.332884] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[-----------------------][ 0.333251] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[-----------------------][ 0.333473] [audpp.c:audpp_probe] queueid:13
<6>[-----------------------][ 0.333819] [audpp.c:audpp_probe] decid:0
<6>[-----------------------][ 0.334166] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.334383] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[-----------------------][ 0.334739] [audpp.c:audpp_probe] queueid:14
<6>[-----------------------][ 0.334944] [audpp.c:audpp_probe] decid:1
<6>[-----------------------][ 0.335288] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.335643] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[-----------------------][ 0.335863] [audpp.c:audpp_probe] queueid:15
<6>[-----------------------][ 0.336209] [audpp.c:audpp_probe] decid:2
<6>[-----------------------][ 0.336414] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.350538] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[-----------------------][ 0.350906] [audpp.c:audpp_probe] queueid:16
<6>[-----------------------][ 0.351254] [audpp.c:audpp_probe] decid:3
<6>[-----------------------][ 0.351459] [audpp.c:audpp_probe] nr_codec_support:11
<6>[-----------------------][ 0.351814] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[-----------------------][ 0.352173] [audpp.c:audpp_probe] queueid:17
<6>[-----------------------][ 0.352379] [audpp.c:audpp_probe] decid:4
<6>[-----------------------][ 0.352724] [audpp.c:audpp_probe] nr_codec_support:1
*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** CUT *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
<4>[-----------------------][ 0.612901] BU61800 init start
<7>[-----------------------][ 0.613764] Registered led device: lcd-backlight
<3>[-----------------------][ 0.613788] bu61800bl:bu61800_probe: Registering led class dev successfully.
<7>[-----------------------][ 0.614201] Registered led device: button-backlight
<3>[-----------------------][ 0.614221] bu61800bl:bu61800_probe: Registering led class dev successfully.
<3>[-----------------------][ 0.618993] bu61800bl:bu61800_probe: done
<6>[-----------------------][ 0.622471] setting pdata->panel_info.fb_num to 3. type: 2
<6>[-----------------------][ 0.624686] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<4>[-----------------------][ 0.625536] Read GPIO LCD port 1
<6>[-----------------------][ 0.909313] input: touch_mcs8000 as /devices/virtual/input/input0
<7>[-----------------------][ 0.909939] evbug: Connected device: input0 (touch_mcs8000 at unknown)
<6>[-----------------------][ 0.910596] ts_set_veg : 0
<6>[-----------------------][ 0.936828] ts_set_veg : 1
<6>[-----------------------][ 0.976683] Touchscreen is connected to the board
<4>[-----------------------][ 1.049021] <MELFAS> CORE_VERSION : 0x D
<4>[-----------------------][ 1.050483] GPIO Matrix Keypad Driver: Start keypad matrix for e0_keypad in interrupt mode
<6>[-----------------------][ 1.051456] input: e0_keypad as /devices/virtual/input/input1
<7>[-----------------------][ 1.052071] evbug: Connected device: input1 (e0_keypad at unknown)
<6>[-----------------------][ 1.053309] Bosch Sensortec Device detected!
<6>[-----------------------][ 1.053323] BMA250 registered I2C driver!
<6>[-----------------------][ 1.054269] input: bma250 as /devices/virtual/input/input2
<7>[-----------------------][ 1.054696] evbug: Connected device: input2 (bma250 at unknown)
<4>[-----------------------][ 1.056076]
<4>[-----------------------][ 1.056084] [I]<6><><bmm_probe><1174>function entrance
<4>[-----------------------][ 1.056689]
<4>[-----------------------][ 1.056698] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[-----------------------][ 1.061524]
<4>[-----------------------][ 1.061533] [I]<6><><bmm_wakeup><209>wake up result: succeed, tried times: 2
<4>[-----------------------][ 1.062076]
<4>[-----------------------][ 1.062083] [I]<6><><bmm_probe><1198>register dump after waking up
<7>[-----------------------][ 1.062641] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.062653]
<7>[-----------------------][ 1.071508] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.071519] 00 00 00 ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.071531] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.071541] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.071553]
<4>[-----------------------][ 1.072181]
<4>[-----------------------][ 1.072188] [I]<6><><bmm_check_chip_id><144>read chip id result: 0x32
<4>[-----------------------][ 1.072874]
<4>[-----------------------][ 1.072881] [N]<5><><bmm_probe><1203>Bosch Sensortec Device bmm050 detected
<6>[-----------------------][ 1.073799] input: bmm050 as /devices/virtual/input/input3
<7>[-----------------------][ 1.074198] evbug: Connected device: input3 (bmm050 at unknown)
<7>[-----------------------][ 1.087289] 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
<7>[-----------------------][ 1.087303]
<7>[-----------------------][ 1.096151] 32 01 01 00 01 00 01 00 00 00 00 01 06 3f 07 00
<7>[-----------------------][ 1.096163] 00 04 0f ff 00 1c a5 42 00 a0 36 63 1a ff 0b 00
<7>[-----------------------][ 1.096174] 46 28 28 00 fd fd 0c 00 00 03 39 54 07 1a 35 fe
<7>[-----------------------][ 1.096184] fe 1c ff ff ff ff ff ff ff ff ff ff ff ff ff ff
<7>[-----------------------][ 1.096196]
<4>[-----------------------][ 1.097356]
<4>[-----------------------][ 1.097364] [N]<5><><bmm_probe><1295>sensor bmm050 probed successfully
From CM:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
I/cm ( 113): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
I/cm ( 114): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/cm ( 117): Welcome to Android 4.3 / CyanogenMod-10.2-20131009-UNOFFICIAL-e400

Nobody? Nothing? Why?

fergy said:
Nobody? Nothing? Why?
Click to expand...
Click to collapse
I dont think there are some other devs from l3 who can help u! But u've done a rly good work, yet! So we are pleased to see a first build of cm10/1/2/3 or even 11
The whole l3 comunity will apprecate your work!

All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.

thank you for your progress till now, waiting to see more progress and a bootable cm10.1/2 port !

Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk

cybojenix said:
Anyone developing this kernel, please linger on freenode, channel #teamhacklg. I will normally be on, and I will assist where I can.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj

hecatae said:
finally in a position to start some development, on #teamhacklg too.
if anyone wants to look a tthe experimental 3.4 kernel, it's here: https://github.com/TeamHackLG/lge-kernel-lproj
Click to expand...
Click to collapse
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1

cybojenix said:
https://github.com/TeamHackLG/lge-kernel-lproj/tree/l3/3.4/4.1
Click to expand...
Click to collapse
Code:
--------- beginning of /dev/log/main
I/cm ( 116): Welcome to Android 4.1.2 / CyanogenMod-10-20131116-UNOFFICIAL-e400
I/cm ( 117): _
I/cm ( 118): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 119): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 120): )) _))
I/cm ( 121):
I/DEBUG ( 126): debuggerd: Nov 16 2013 15:02:12

and??
Post more

cr3pt said:
and??
Post more
Click to expand...
Click to collapse
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C

DeathArrow said:
All drivers are there in the LG E600 kernel, you just have to make a proper config file, compile and boot. You may have to debug using ADB a few times but if you have enough spare time, in few hours, one day at most, you should be able to boot it.
Don't try to boot the kernel with an Android 2.3 or 4.0 image because it won't work. Use CM10 or, better yet, CM10.1.
Click to expand...
Click to collapse
OK, let's make this transparent.
Did You make working Kernel with E600 sources (for working, I mean that Android is booted)?
To answer on that: no.
Why: drivers for E400 touch (and some other things) are not compatible with E600, nor E410, nor anything except E400/E405.
Now when this is clear, can We continue with make it "workable"?
You notice that I say "workable" instead "bootable" as don't need any introduction 'how-to'.... instead of that, was ask (and was asked) if anybody want to work on this. Apreciate Your knowledge, but wasn't see that anyone is interesting on this 'bump-up'.
Anyway, I am not here to discuss about 'how to' make something (there are lot's of forums about help) but to help to someone and get help if needed regarding specific thing, so can We cooperate on project or not?

hecatae said:
Code:
<6>[ 0.293793] ION heap camera_preview created at 26600000 with size 1000000
<6>[ 0.294124] ION heap audio created at 27600000 with size 22e000
<6>[ 0.294333] ION heap sf created at 2782e000 with size 7a0000
<5>[ 0.295201] SCSI subsystem initialized
<6>[ 0.295699] usbcore: registered new interface driver usbfs
<6>[ 0.295979] usbcore: registered new interface driver hub
<6>[ 0.296479] usbcore: registered new device driver usb
<6>[ 0.297118] i2c-gpio i2c-gpio.2: using pins 112 (SDA) and 111 (SCL)
<6>[ 0.297673] i2c-gpio i2c-gpio.3: using pins 10 (SDA) and 9 (SCL)
<6>[ 0.298198] i2c-gpio i2c-gpio.4: using pins 35 (SDA) and 13 (SCL)
<6>[ 0.298759] i2c-gpio i2c-gpio.5: using pins 30 (SDA) and 16 (SCL)
<6>[ 0.299314] i2c-gpio i2c-gpio.6: using pins 80 (SDA) and 77 (SCL)
<6>[ 0.299546] Linux media interface: v0.10
<6>[ 0.299778] Linux video capture interface: v2.00
<6>[ 0.300451] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.301404] Bluetooth: Core ver 2.16
<6>[ 0.301778] NET: Registered protocol family 31
<6>[ 0.301954] Bluetooth: HCI device and connection manager initialized
<6>[ 0.302261] Bluetooth: HCI socket layer initialized
<6>[ 0.302434] Bluetooth: L2CAP socket layer initialized
<6>[ 0.303024] Bluetooth: SCO socket layer initialized
<6>[ 0.304196] Switching to clocksource dg_timer
<6>[ 0.330859] NET: Registered protocol family 2
<6>[ 0.331598] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.332368] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.333163] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.333748] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.333938] TCP: reno registered
<6>[ 0.334114] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.334531] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.335374] NET: Registered protocol family 1
<6>[ 0.335908] Unpacking initramfs...
<6>[ 0.371669] Freeing initrd memory: 320K
<3>[ 0.376664] Notify: smsm init
<4>[ 0.377214] get_nand_partitions: no flash partition table in shared memory
<6>[ 0.381979] rpcrouter_smd_remote_notify: smd opened 0x (null)
<3>[ 0.385018] rpcrouter: Server create rejected, version = 0, program = 3000003b
<3>[ 0.386558] rpcrouter: Server create rejected, version = 0, program = 30000051
<6>[ 0.398306] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 0.399738] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 0.399929] [audpp.c:audpp_probe] Number of concurrency supported 8
<6>[ 0.400233] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 0.400411] [audpp.c:audpp_probe] queueid:13
<6>[ 0.400581] [audpp.c:audpp_probe] decid:0
<6>[ 0.400749] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.400924] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 0.401224] [audpp.c:audpp_probe] queueid:14
<6>[ 0.401403] [audpp.c:audpp_probe] decid:1
<6>[ 0.401694] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.401871] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 0.402048] [audpp.c:audpp_probe] queueid:15
<6>[ 0.402339] [audpp.c:audpp_probe] decid:2
<6>[ 0.402511] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.402804] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 0.402981] [audpp.c:audpp_probe] queueid:16
<6>[ 0.403153] [audpp.c:audpp_probe] decid:3
<6>[ 0.403443] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 0.403618] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 0.403913] [audpp.c:audpp_probe] queueid:17
<6>[ 0.404084] [audpp.c:audpp_probe] decid:4
<6>[ 0.404253] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 0.405756] __msm_rpc_connect: server not found 30000002:20001
<1>[ 0.407821] dma_test_init, minor number 35
<6>[ 0.408194] lge_panic_handler: got buffer at cf3e000, size 1000
<6>[ 0.408574] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0d0c0000, size = 0x00300000
<6>[ 0.408898] rmt_storage_get_ramfs: RAMFS entry: addr = 0x0cfc0000, size = 0x00100000
<6>[ 0.409426] rmt_storage_probe: Remote storage RPC client (0x300000a7)initialized
<6>[ 0.414814] rmt_storage_set_client_status Entered
<4>[ 0.415849] diagcmd_probe:lg_fw_diagcmd
<6>[ 0.416374] lge_emmc_direct_access_init: started
<6>[ 0.416668] lge_emmc_direct_access_init: finished
<6>[ 0.616374] fuse init (API version 7.18)
<6>[ 0.617114] msgmni has been set to 582
<4>[ 0.617829] cryptomgr_test used greatest stack depth: 7136 bytes left
<6>[ 0.620109] io scheduler noop registered
<6>[ 0.620363] io scheduler cfq registered (default)
<4>[ 0.620878] rt9396 init start
<6>[ 0.621111] rt9396bl:rt9396_probe: start, client addr=0x54
<7>[ 0.621769] Registered led device: lcd-backlight
<3>[ 0.621786] rt9396bl:rt9396_probe: Registering led class dev successfully.
<7>[ 0.622088] Registered led device: button-backlight
<3>[ 0.622103] rt9396bl:rt9396_probe: Registering led class dev successfully.
<3>[ 0.623034] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x34)
<6>[ 0.623219] rt9396bl:rt9396_set_table: i2c failed addr:131, value:52
<3>[ 0.624116] rt9396bl:rt9396_write: fail to write(reg=0x93,val=0x5)
<6>[ 0.624601] rt9396bl:rt9396_set_table: i2c failed addr:147, value:5
<3>[ 0.625386] rt9396bl:rt9396_write: fail to write(reg=0x83,val=0x14)
<4>[ 0.625688] [rt9396_send_intensity] LCD-backlight ON !!!!! val:20
<3>[ 0.625869] rt9396bl:rt9396_probe: done
<6>[ 0.628228] setting pdata->panel_info.fb_num to 3. type: 2
<4>[ 0.628949] ### call the initial lut update routine
<4>[ 0.629133] mdp_lut_init_update_lcdc start ..
<4>[ 0.629426] ### mdp_lut_init_update_lcdc mdp_lut_init_update_lcdc++: mdp_lut_i = 0
<4>[ 0.629619] ### mdp_lut_hw_updae++: mdp_lut_i = 0
<4>[ 0.629793] #### Sign is not Matched#### Cal value R=255 G=255 B=255
<4>[ 0.630303] mdp_lut_init_update_lcdc end.........
<6>[ 0.631391] FrameBuffer[0] 240x320 size=491520 bytes is registered successfully!
<6>[ 0.632286] msm_serial: detected port #0
<6>[ 0.632564] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 9) is a MSM
<6>[ 0.633293] msm_serial: driver initialized
<6>[ 0.634191] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 0.634934] msm_serial_hs module loaded
<6>[ 0.637033] LG_FW : diagchar_open succeed
<7>[ 0.637294] LG_FW : CreateWaitThread, diagchar_read 10004 byte
<7>[ 0.637316] LG_FW : CreateWaitThread, diagchar_read 1004 byte
<7>[ 0.637356] LG_FW : CreateWaitThread, diagchar_read 8004 byte
<6>[ 0.637383] diagchar initialized now
<6>[ 0.637551] MTS_TTY: mtsk_tty_init
<6>[ 0.638034] mtsk_tty_init SUCESS MTS_TTY_REGISTERED
<4>[ 0.640509] dalrpc_rcv_DAL0 used greatest stack depth: 7056 bytes left
<6>[ 0.641459] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
<6>[ 0.646673] loop: module loaded
<6>[ 0.647171] lge_tty_atcmd_init: initialize atcmd-ttys
<6>[ 0.647608] lge_kcal_init: finished
<6>[ 0.865471] SCSI Media Changer driver v0.25
<6>[ 0.866386] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.866573] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 0.866994] rmnet_init: SMD devices[8]
<6>[ 0.873634] PPP generic driver version 2.4.2
<4>[ 0.874633] kworker/u:1 used greatest stack depth: 6748 bytes left
<4>[ 0.874941] kworker/u:1 used greatest stack depth: 6652 bytes left
<6>[ 0.875961] PPP MPPE Compression module registered
<6>[ 0.876154] NET: Registered protocol family 24
<7>[ 0.876494] gpio_request: gpio-141 (i2c_host_vbus_en) status -22
<3>[ 0.876511] failed to request 141 GPIO
<6>[ 0.877761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.878114] host driver registered w/ tranceiver
<6>[ 0.878616] usbcore: registered new interface driver usb_ehset_test
<6>[ 0.879364] peripheral driver registered w/ tranceiver
<6>[ 0.880416] mbim_init: initialize 1 instances
<6>[ 0.880738] mbim_init: Initialized 1 ports
<6>[ 0.883354] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.883558] android_usb gadget: Number of LUNs=1
<6>[ 0.883858] lun0: LUN: removable file: (no medium)
<6>[ 0.885774] android_set_factory_mode : Using Normal Cable (11)
<6>[ 0.886099] android_usb gadget: android_usb ready
<6>[ 0.887154] input: touch_mcs8000 as /devices/virtual/input/input0
<6>[ 1.104546] msm_hsusb_set_vbus_state USB Connection
<6>[ 1.104861] msm_hsusb_set_vbus_state irq conunt is false
<4>[ 1.176676] Touch PRODUCT = LE0, comp_ver = 0
<6>[ 1.176974] Firmware ver : [0],HW ver : [0]
<6>[ 1.177146] .......MFS_ISC_SINGLE update.........
<4>[ 1.177441] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.177634] ldo01: Failed to create debugfs directory
<4>[ 1.284431] ldo01: Failed to create debugfs directory
<4>[ 1.394414] <MELFAS> mass erase start
<4>[ 1.394423]
<6>[ 1.415223] android_set_factory_mode : Using Normal Cable (11)
<6>[ 1.644588] android_work: android_work: did not send uevent (0 0 (null))
<4>[ 1.874409] <MELFAS> TOUCH IC REBOOT!!!
<4>[ 1.874759] ldo01: Failed to create debugfs directory
<4>[ 1.984429] ldo01: Failed to create debugfs directory
<4>[ 2.095278] GPIO Matrix Keypad Driver: Start keypad matrix for vee3_keypad in interrupt mode
<6>[ 2.095903] input: vee3_keypad as /devices/virtual/input/input1
<6>[ 2.096653] bma2x2_probe
<6>[ 2.381861] Bosch Sensortec Device not found retry_chipid = 0
<6>[ 2.382169] i2c_smbus_read_word_data retry_chipid = 0, tempvalue = 8063
<6>[ 2.668391] Bosch Sensortec Device not found retry_chipid = 1
<6>[ 2.668699] i2c_smbus_read_word_data retry_chipid = 1, tempvalue = 8063
<6>[ 2.954909] Bosch Sensortec Device not found retry_chipid = 2
<6>[ 2.955219] i2c_smbus_read_word_data retry_chipid = 2, tempvalue = 8063
<6>[ 3.241456] Bosch Sensortec Device not found retry_chipid = 3
<6>[ 3.241759] i2c_smbus_read_word_data retry_chipid = 3, tempvalue = 8063
<6>[ 3.528893] Bosch Sensortec Device not found retry_chipid = 4
<6>[ 3.529079] i2c_smbus_read_word_data retry_chipid = 4, tempvalue = 8063
<6>[ 3.817149] Bosch Sensortec Device not found retry_chipid = 5
<6>[ 3.817329] i2c_smbus_read_word_data retry_chipid = 5, tempvalue = 8063
<6>[ 3.817631] Bosch Sensortec Device not foundi2c error 8063
<3>[ 4.330169] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.446624] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.795363] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 4.966901] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.083609] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.432946] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.604953] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 5.721701] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.071626] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.243809] i2c i2c-4: sendbytes: NAK bailout.
<3>[ 6.360683] i2c i2c-4: sendbytes: NAK bailout.
<6>[ 6.367518] input: bma2x2 as /devices/virtual/input/input2
<4>[ 6.368141] i2c-core: driver [bma2x2] using legacy suspend method
<4>[ 6.368449] i2c-core: driver [bma2x2] using legacy resume method
<4>[ 6.368679]
<4>[ 6.368686] [I]<6><><bmm_probe><1174>function entrance
<4>[ 6.369134]
<4>[ 6.369139] [I]<6><><bmm_wakeup><193>waking up the chip...
<4>[ 8.401534]
<4>[ 8.401541] [I]<6><><bmm_wakeup><209>wake up result: fail, tried times: 6
<4>[ 8.401999]
<4>[ 8.402004] [E]<3><><bmm_probe><1193>Cannot wake up bmm050, I2C xfer error
<4>[ 8.402474] bmm050: probe of 4-0012 failed with error -5
<6>[ 8.403186] input: proximity as /devices/virtual/input/input3
<6>[ 8.403619] proximity_apds9190 5-0039: enable = 0
<3>[ 8.404439] rt9396bl:rt9396_write: fail to write(reg=0x23,val=0xc)
<6>[ 8.404744] prox_power_set,***********Proximity probe enter when power on*****
<6>[ 8.455571] apds9190_probe,Proximity apds9190_init_client Fail in Probe
<6>[ 8.455876] proximity_apds9190 5-0039: probe error
<6>[ 8.458443] RPC CALL -- TOD TIME UPDATE: ttick = 507498
<6>[ 8.458453] stamp=53795234181578752, freq = 1217159378
<3>[ 8.458959] ../../../../../../kernel/lge/msm7x27a-common/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 8.460618] using rtc device, msm_rtc, for alarms
<6>[ 8.460954] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<6>[ 8.462061] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 8.462566] i2c /dev entries driver
<4>[ 8.464779] hi351
<4>[ 8.465009] hi351_sensor_power_up: E 915
<3>[ 8.465308] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en enable
<3>[ 8.466116] rt9396bl:rt9396_write: fail to write(reg=0x31,val=0x4)
<3>[ 8.466416] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) failed
<3>[ 8.467189] rt9396bl:rt9396_write: fail to write(reg=0x25,val=0xb)
<3>[ 8.467491] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) failed
<3>[ 8.468383] rt9396bl:rt9396_write: fail to write(reg=0x29,val=0x1)
<3>[ 8.468563] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) failed
<3>[ 8.524404] MCLK set
<4>[ 8.564411] hi351_sensor_power_up: X 979
<3>[ 8.824426] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 8.824729] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 8.824906] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 8.825201] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.084424] qup_i2c qup_i2c.0: Transaction timed out, SL-AD = 0x20
<3>[ 9.084609] qup_i2c qup_i2c.0: I2C Status: 132100
<3>[ 9.084903] qup_i2c qup_i2c.0: QUP Status: 0
<3>[ 9.085076] qup_i2c qup_i2c.0: OP Flags: 10
<3>[ 9.085374] hi351_match_id: hi351: read id failed
<3>[ 9.085549] msm_sensor_i2c_probe hi351_i2c_probe failed
<4>[ 9.085726] hi351_sensor_power_down: E 995
<3>[ 9.164513] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable start
<3>[ 9.165431] rt9396bl:rt9396_write: fail to write(reg=0x28,val=0x1)
<3>[ 9.165609] msm_camera_vreg_config: rt9396_ldo_enable(ldo3) OFF failed
<3>[ 9.166501] rt9396bl:rt9396_write: fail to write(reg=0x24,val=0xb)
<3>[ 9.166679] msm_camera_vreg_config: rt9396_ldo_enable(ldo2) OFF failed
<3>[ 9.167571] rt9396bl:rt9396_write: fail to write(reg=0x30,val=0x4)
<3>[ 9.167749] msm_camera_vreg_config: rt9396_ldo_enable(ldo4) OFF failed
<3>[ 9.168049] msm_camera_vreg_config: msm_camera_vreg_config power on vreg_en disable end
<4>[ 9.168364] hi351_sensor_power_down: X 1029
<4>[ 9.168554] hi351: probe of 0-0040 failed with error -110
<6>[ 9.170173] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
<6>[ 9.170481] tavarua_radio: tavarua_probe: probe called
<7>[ 9.171161] msm_batt_init: enter
<7>[ 9.173439] msm_batt_enable_filter: enable vbatt filter: OK
<7>[ 9.173463] msm_batt_update_psy_status: enter
<6>[ 9.174184] BATT:FULL Soc
<7>[ 9.174368] msm_batt_update_psy_status: exit
<6>[ 9.174563] msm_batt_init: Charger/Battery = 0x00040001/0x00050001 (RPC version)
<6>[ 9.176108] msm_adc successfully registered
<6>[ 9.176411] msm_adc successfully registered
<6>[ 9.177459] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[ 9.177958] Bluetooth: HCI UART driver ver 2.2
<6>[ 9.178134] Bluetooth: HCI H4 protocol initialized
<6>[ 9.178428] Bluetooth: HCI_IBS protocol initialized
<6>[ 9.180023] mmc0: SDCC Version: 0x00000000
<3>[ 9.180493] mmc0: No card detect facilities available
<6>[ 9.182466] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0600000 irq 48,0 dma 7 dmacrcri 12
<6>[ 9.182791] mmc0: Controller capabilities: 0x00000001
<6>[ 9.182966] mmc0: 8 bit data mode enabled
<6>[ 9.183256] mmc0: 4 bit data mode disabled
<6>[ 9.183426] mmc0: polling status mode disabled
<6>[ 9.183601] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.183901] mmc0: Slot eject status = 0
<6>[ 9.184069] mmc0: Power save feature enable = 1
<6>[ 9.184366] mmc0: DM non-cached buffer at ffdc0000, dma_addr 0x25960000
<6>[ 9.184614] mmc0: DM cmd busaddr 0x25960000, cmdptr busaddr 0x25977f40
<6>[ 9.185541] mmc1: SDCC Version: 0x00000000
<6>[ 9.187714] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 24,296 dma 8 dmacrcri 6
<6>[ 9.188046] mmc1: Controller capabilities: 0x00000001
<6>[ 9.188223] mmc1: 8 bit data mode disabled
<6>[ 9.188514] mmc1: 4 bit data mode enabled
<6>[ 9.188684] mmc1: polling status mode disabled
<6>[ 9.188859] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.189159] mmc1: Slot eject status = 0
<6>[ 9.189328] mmc1: Power save feature enable = 1
<6>[ 9.189623] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x25980000
<6>[ 9.189808] mmc1: DM cmd busaddr 0x25980000, cmdptr busaddr 0x25997f40
<6>[ 9.190719] mmc2: SDCC Version: 0x00000000
<3>[ 9.191116] mmc2: No card detect facilities available
<6>[ 9.192781] mmc2: Qualcomm MSM SDCC-core at 0x00000000a0500000 irq 26,0 dma 8 dmacrcri 7
<6>[ 9.192984] mmc2: Controller capabilities: 0x00000001
<6>[ 9.193281] mmc2: 8 bit data mode disabled
<6>[ 9.193601] mmc2: 4 bit data mode enabled
<6>[ 9.193894] mmc2: polling status mode disabled
<6>[ 9.194069] mmc2: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 9.194246] mmc2: Slot eject status = 0
<6>[ 9.194578] mmc2: Power save feature enable = 1
<6>[ 9.194758] mmc2: DM non-cached buffer at ffd40000, dma_addr 0x259a0000
<6>[ 9.195059] mmc2: DM cmd busaddr 0x259a0000, cmdptr busaddr 0x259b7f40
<6>[ 9.195501] LP5521: probe startlp5521_enable
<4>[ 9.195791]
<6>[ 9.196164] lp5521_disable_set
<6>[ 9.198374] lp5521_enable_set
<3>[ 9.219924] lp5521 6-0032: error in resetting chip
<6>[ 9.220233] lp5521_disable_set
<4>[ 9.220428] lp5521: probe of 6-0032 failed with error -5
<4>[ 9.225863] i2c-core: driver [lp5521] using legacy suspend method
<4>[ 9.226046] i2c-core: driver [lp5521] using legacy resume method
<6>[ 9.232328] usbcore: registered new interface driver usbhid
<6>[ 9.237609] usbhid: USB HID core driver
<6>[ 9.243784] ashmem: initialized
<6>[ 9.244194] logger: created 256K log 'log_main'
<6>[ 9.249606] logger: created 256K log 'log_events'
<6>[ 9.250018] logger: created 256K log 'log_radio'
<6>[ 9.255386] logger: created 256K log 'log_system'
<6>[ 9.261643] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
<3>[ 9.267979] msm_soc: ALSA MSM Mixer Setting
<6>[ 9.273719] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
<6>[ 9.278421] __msm_rpc_connect: server not found 30000002:20001
<7>[ 9.278614] msm_snd_rpc_connect failed (compatible VERS = 131073) trying again with another API
<6>[ 9.279091] oprofile: using arm/armv7
<6>[ 9.279531] GACT probability on
<6>[ 9.279716] Mirror/redirect action on
<6>[ 9.279888] Simple TC action Loaded
<6>[ 9.280961] netem: version 1.3
<6>[ 9.281149] u32 classifier
<6>[ 9.281313] Performance counters on
<6>[ 9.281599] input device check on
<6>[ 9.281764] Actions configured
<6>[ 9.281946] Netfilter messages via NETLINK v0.30.
<6>[ 9.282351] nf_conntrack version 0.5.0 (4659 buckets, 18636 max)
<6>[ 9.283494] ctnetlink v0.93: registering with nfnetlink.
<6>[ 9.283868] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 9.284053] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 9.284806] xt_time: kernel timezone is -0000
<6>[ 9.285674] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.286281] arp_tables: (C) 2002 David S. Miller
<6>[ 9.286546] TCP: cubic registered
<6>[ 9.286716] Initializing XFRM netlink socket
<6>[ 9.287979] NET: Registered protocol family 10
<6>[ 9.291278] Mobile IPv6
<6>[ 9.291526] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 9.292104] IPv6 over IPv4 tunneling driver
<6>[ 9.294181] NET: Registered protocol family 17
<6>[ 9.294504] NET: Registered protocol family 15
<6>[ 9.295089] Bluetooth: RFCOMM TTY layer initialized
<6>[ 9.295288] Bluetooth: RFCOMM socket layer initialized
<6>[ 9.295654] Bluetooth: RFCOMM ver 1.11
<6>[ 9.295828] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 9.296003] Bluetooth: BNEP filters: protocol
<6>[ 9.296176] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 9.296581] L2TP core driver, V2.0
<6>[ 9.296914] PPPoL2TP kernel driver, V2.0
<6>[ 9.297973] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
<6>[ 9.298469] ThumbEE CPU extension supported.
<6>[ 9.301926] clock_late_init: Removing enables held for handed-off clocks
<3>[ 9.305659] [audio_acdb.c:initialize_rpc] ACDB=> Device Attach failed
<6>[ 9.306091] input: 7k_handset as /devices/virtual/input/input4
<6>[ 9.307826] [BootMode] apps_boot_mode = 0x00000000
<6>[ 9.308694] [FTM] check manual mode [0]
<3>[ 9.308969] lge_get_nv_charging_bypass_boot: msm_proc_comm(PCOM_CUSTOMER_CMD2) failed. cmd(22)
<6>[ 9.309118] All above check routines are passed.
<6>[ 9.309339] [BootMode] boot_mode = unknown
<6>[ 9.309864] input: ats_input as /devices/virtual/input/input5
<6>[ 9.311379] rs30000048 rs30000048.262144: setting system clock to 2012-07-11 17:25:09 UTC (1342027509)
<4>[ 9.311728] Rmt Wait Info Success
<6>[ 9.312121] HSD.fsa8008[lge_hsd_init : 1038]lge_hsd_init
<6>[ 9.312258] HSD.fsa8008[lge_hsd_init : 1041]wake lock init
<6>[ 9.312808] HSD.fsa8008[lge_hsd_probe : 757]lge_hsd_probe
<6>[ 9.313088] HSD.fsa8008[lge_hsd_probe : 850]hi->irq_detect = 297
<6>[ 9.313643] HSD.fsa8008[lge_hsd_probe : 875]hi->irq_key = 285
<6>[ 9.313788] HSD.fsa8008[lge_hsd_probe : 883]initialized irq of gpio_key
<6>[ 9.314021] HSD.fsa8008[lge_hsd_probe : 890]name : h2w state : c03f7a70 : c03f7e08
<6>[ 9.314553] HSD.fsa8008[lge_hsd_probe : 896]request_threaded_irq
<6>[ 9.314969] HSD.fsa8008[lge_hsd_probe : 907]irq_set_irq_wake(hi->irq_key, 1)
<6>[ 9.315323] HSD.fsa8008[lge_hsd_probe : 913]initialize input device
<6>[ 9.315869] input: ffa-keypad as /devices/virtual/input/input6
<6>[ 9.316356] ALSA device list:
<6>[ 9.316493] #0: msm-audio
<6>[ 9.317268] Freeing init memory: 188K
<4>[ 9.322649] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<7>[ 9.323718] msm_batt_update_psy_status: enter
<7>[ 9.324376] BATT: same event count = 1
<6>[ 9.343758] mmc0: new high speed MMC card at address 0001
<4>[ 9.344248] mmc_can_discard : mmc0 disabled
<6>[ 9.344721] mmcblk0: mmc0:0001 HYNIX 3.60 GiB
<6>[ 9.349249] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 >
<3>[ 9.513584] init: cannot open '/initlogo.rle'
<3>[ 9.516688] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 9.531874] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.549661] EXT4-fs (mmcblk0p14): re-mounted. Opts: data=ordered,barrier=1
<4>[ 9.565381] init used greatest stack depth: 6028 bytes left
<4>[ 9.668986] e2fsck used greatest stack depth: 5540 bytes left
<3>[ 9.669286] init: exec: pid 102 exited with return code 4: Unknown error: 1024
<6>[ 9.711771] EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: data=ordered,barrier=1
<6>[ 9.732763] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc,errors=continue
<3>[ 9.734829] init: cannot find '/system/bin/rmt_storage', disabling 'rmt_storage'
<4>[ 9.907963] run-parts used greatest stack depth: 5380 bytes left
<4>[ 9.908974] sysinit used greatest stack depth: 5332 bytes left
<3>[ 9.941396] enable_store: android_usb: already disabled
<3>[ 9.941613] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
<3>[ 9.941953] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
<4>[ 9.962129] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 9.965781] functions_store: functions_store: request function list: mtp,adb
<3>[ 9.966391] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 9.969261] mmc1: new high speed SDHC card at address 1234
<4>[ 9.971121] mmc_can_discard : mmc1 disabled
<6>[ 9.971449] mmcblk1: mmc1:1234 SA04G 3.69 GiB
<6>[ 9.978444] mmcblk1: p1
<6>[ 9.994788] adb_open
<6>[ 9.994956] mtp_bind_config
<6>[ 9.995144] adb_bind_config
<6>[ 10.326401] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[ 10.457591] android_usb gadget: high-speed config #1: android
<6>[ 10.514559] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 10.934524]
<6>[ 10.934536] Charger Type: STD DOWNSTREAM PORT
<4>[ 11.511039] Unsupported request to MDP META IOCTL.
<4>[ 11.534664] ilitek_qvga_disp_on: display on...
<4>[ 11.534684] ilitek_qvga_disp_on: display on...Skip!!!!!! and back light off charger logo mode
<6>[ 11.825173] __msm_rpc_connect: server not found 30000002:20001
<6>[ 11.825656] [snd.c:snd_ioctl] snd_avc_ctl 0
<6>[ 11.828486] [snd.c:snd_ioctl] snd_agc_ctl 0
<6>[ 11.906548] [snd.c:snd_ioctl] snd_set_volume 0 0 7
<6>[ 11.907554] [snd.c:snd_ioctl] snd_set_volume 6 0 7
<6>[ 11.908388] [snd.c:snd_ioctl] snd_set_volume 12 0 7
<6>[ 11.909379] [snd.c:snd_ioctl] snd_set_volume 3 0 7
<6>[ 11.910246] [snd.c:snd_ioctl] snd_set_volume 16 0 7
<6>[ 11.911044] [snd.c:snd_ioctl] snd_set_volume 25 0 7
<6>[ 11.911968] [snd.c:snd_ioctl] snd_set_volume 8 0 1
<6>[ 11.912703] [snd.c:snd_ioctl] snd_set_volume 9 0 1
<6>[ 11.914114] [snd.c:snd_ioctl] snd_set_device 6 1 1
<6>[ 11.915129] [snd.c:snd_ioctl] snd_set_volume 2147483646 0 2
<6>[ 12.094651] ebi2_tovis_power_save: on=0
<4>[ 12.095333] ldo10: Failed to create debugfs directory
<6>[ 12.116198] request_suspend_state: wakeup (3->0) at 12101743335 (2012-07-11 17:25:12.292058335 UTC)
<7>[ 12.326218] msm_batt_update_psy_status: enter
<7>[ 12.326798] msm_batt_update_psy_status: exit
<3>[ 12.930053] init: untracked pid 264 exited
<7>[ 13.271251] msm_batt_update_psy_status: enter
<7>[ 13.273504] msm_batt_update_psy_status: exit
<3>[ 14.984799] gpio_tlmm_config(0x000e4381, GPIO_CFG_DISABLE) <sdc1_clk> failed: 0
<3>[ 14.984979] pin 56 func 1 dir 1 pull 0 drvstr 7
<3>[ 14.985246] gpio_tlmm_config(0x000fc371, GPIO_CFG_DISABLE) <sdc1_cmd> failed: -5
<3>[ 14.985393] pin 55 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.985654] gpio_tlmm_config(0x000fc361, GPIO_CFG_DISABLE) <sdc1_dat_0> failed: -5
<3>[ 14.985801] pin 54 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986059] gpio_tlmm_config(0x000fc351, GPIO_CFG_DISABLE) <sdc1_dat_1> failed: -5
<3>[ 14.986206] pin 53 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986466] gpio_tlmm_config(0x000fc341, GPIO_CFG_DISABLE) <sdc1_dat_2> failed: -5
<3>[ 14.986616] pin 52 func 1 dir 1 pull 3 drvstr 7
<3>[ 14.986896] gpio_tlmm_config(0x000fc331, GPIO_CFG_DISABLE) <sdc1_dat_3> failed: -5
<3>[ 14.987136] pin 51 func 1 dir 1 pull 3 drvstr 7
<7>[ 15.392186] msm_batt_update_psy_status: enter
<7>[ 15.392776] msm_batt_update_psy_status: exit
<4>[ 15.821689] Unsupported request to MDP META IOCTL.
<6>[ 15.971654] request_suspend_state: wakeup (0->0) at 15957251668 (2012-07-11 17:25:16.147576668 UTC)
<3>[ 15.973188] init: untracked pid 391 exited
<7>[ 18.255924] msm_batt_update_psy_status: enter
<7>[ 18.257633] msm_batt_update_psy_status: exit
<7>[ 18.338273] msm_batt_update_psy_status: enter
<7>[ 18.339929] msm_batt_update_psy_status: exit
<4>[ 20.845571] Unsupported request to MDP META IOCTL.
<6>[ 20.947123] request_suspend_state: wakeup (0->0) at 20932720002 (2012-07-11 17:25:21.123046668 UTC)
<3>[ 20.949051] init: untracked pid 480 exited
<7>[ 21.343681] msm_batt_update_psy_status: enter
<7>[ 21.345559] BATT: same event count = 1
^C
Click to expand...
Click to collapse
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.

fergy said:
And?
rt9396bl is not present in device
Firmware ver : [0],HW ver : [0] - touch driver is wrong
ldo01: Failed to create debugfs directory - ldo01 is responsed to give power to touch... failed
Bosch Sensortec Device not found retry_chipid = 0 - wrong pin's, i2c and so on
hi351: probe of 0-0040 failed with error -110 - wrong pin's
lp5521: probe of 6-0032 failed with error -5 - not present in device
So, as I say, vee3 or M4 or U7 or V1 or whatever of Kernel configurations will NOT WORK with E400 device!!!
Why anyone want to make totally other hardware to work with something what not pass in it?
Guys, please, first check-out hardware in device and after that give suggestions....
PS, I was see somewhere here that one is get Kernel working.... (sure, 3.4) so, wondering where is that Kernel where was wrotten here "in a big mouths" and also was link to it for download? OP was ill, ok, but where is working Kernel?
I was find only 'try's' for it but noone work... it boot but, nobody was fix touch driver.
Is anyone try that famous 3.4 what was work on L3? If yes, please send (or attach) me an link so I can try it.
Thank You.
Click to expand...
Click to collapse
hi fergy,
do you want a source, or a kernel, or a boot.img or?

[Q] Random power offs

Hi, I have xperia zl and yesterday accidentally magnet touched my zl...screen turned off and after that it powered on and worked but there were some errors in dmesg. Now it is randomly(or not, I think only when it is a bit overloaded) powering off but if I connect it to to pc it is not rebooting but some strange stuff appears in dmesg ( http://pastebin.com/pckHxMZF ). Any suggestions? Thanks
Also i`m using cm11.0
UPD: Connected with adb over network and waited untill it reboots, here are last lines of dmesg
Code:
<3>[ 400.473968] wlan: [4146:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
<3>[ 426.057586] wlan: [4162:E :SME] sme_FTUpdateKey: Unhandled state=0
<3>[ 440.554016] wlan: [4146:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
<6>[ 453.081512] mdm_status_change: unexpected reset external modem id 0
<6>[ 453.086883] mdm_start_ssr: Resetting mdm id 0 due to mdm error
<6>[ 453.092590] subsys-restart: subsystem_restart_dev(): Restart sequence requested for external_modem, restart_level = 3.
<6>[ 453.103515] subsys-restart: subsystem_shutdown(): [e9fc3480]: Shutting down external_modem
And looks like my wlan0 mac address changed
Found something here - http://forum.xda-developers.com/xperia-z/help/xperia-zbricked-wi-fi-t2409804/page3
It is wifi related, maybe that`s why my mac changed
Now this is dmesg before shutting down:
Code:
<4>[ 229.088745] CPU1 didn't collape within 1ms
<4>[ 229.092071] Modules linked in: wlan(C)
<4>[ 229.096557] [<c010c470>] (unwind_backtrace+0x0/0x11c) from [<c017d1ac>] (warn_slowpath_common+0x4c/0x64)
<4>[ 229.105804] [<c017d1ac>] (warn_slowpath_common+0x4c/0x64) from [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 229.116027] [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4)
<4>[ 229.126922] [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4) from [<c011e8dc>] (platform_cpu_kill+0x20/0x30)
<4>[ 229.136749] [<c011e8dc>] (platform_cpu_kill+0x20/0x30) from [<c010b214>] (__cpu_die+0x4c/0x78)
<4>[ 229.145019] [<c010b214>] (__cpu_die+0x4c/0x78) from [<c08a2e24>] (_cpu_down+0x118/0x214)
<4>[ 229.152648] [<c08a2e24>] (_cpu_down+0x118/0x214) from [<c08a2f44>] (cpu_down+0x24/0x40)
<4>[ 229.160644] [<c08a2f44>] (cpu_down+0x24/0x40) from [<c08a46b4>] (store_online+0x2c/0x78)
<4>[ 229.168914] [<c08a46b4>] (store_online+0x2c/0x78) from [<c049fa78>] (dev_attr_store+0x18/0x24)
<4>[ 229.177307] [<c049fa78>] (dev_attr_store+0x18/0x24) from [<c028a3f4>] (sysfs_write_file+0x100/0x148)
<4>[ 229.186981] [<c028a3f4>] (sysfs_write_file+0x100/0x148) from [<c023a0f8>] (vfs_write+0xa8/0x180)
<4>[ 229.195220] [<c023a0f8>] (vfs_write+0xa8/0x180) from [<c023a3e8>] (sys_write+0x34/0x68)
<4>[ 229.203155] [<c023a3e8>] (sys_write+0x34/0x68) from [<c0106120>] (ret_fast_syscall+0x0/0x30)
<4>[ 229.212249] ---[ end trace da227214a82491c7 ]---
<4>[ 237.840850] ------------[ cut here ]------------
<4>[ 237.844879] WARNING: at ../../../../../../kernel/sony/apq8064/arch/arm/mach-msm/pm-8x60.c:995 msm_pm_wait_cpu_shutdown+0xa8/0xc4()
<4>[ 237.857116] CPU1 didn't collape within 1ms
<4>[ 237.860595] Modules linked in: wlan(C)
<4>[ 237.864349] [<c010c470>] (unwind_backtrace+0x0/0x11c) from [<c017d1ac>] (warn_slowpath_common+0x4c/0x64)
<4>[ 237.873840] [<c017d1ac>] (warn_slowpath_common+0x4c/0x64) from [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 237.883880] [<c017d244>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4)
<4>[ 237.893402] [<c0150f28>] (msm_pm_wait_cpu_shutdown+0xa8/0xc4) from [<c011e8dc>] (platform_cpu_kill+0x20/0x30)
<4>[ 237.906341] [<c011e8dc>] (platform_cpu_kill+0x20/0x30) from [<c010b214>] (__cpu_die+0x4c/0x78)
<4>[ 237.914611] [<c010b214>] (__cpu_die+0x4c/0x78) from [<c08a2e24>] (_cpu_down+0x118/0x214)
<4>[ 237.922973] [<c08a2e24>] (_cpu_down+0x118/0x214) from [<c08a2f44>] (cpu_down+0x24/0x40)
<4>[ 237.930145] [<c08a2f44>] (cpu_down+0x24/0x40) from [<c08a46b4>] (store_online+0x2c/0x78)
<4>[ 237.938812] [<c08a46b4>] (store_online+0x2c/0x78) from [<c049fa78>] (dev_attr_store+0x18/0x24)
<4>[ 237.946838] [<c049fa78>] (dev_attr_store+0x18/0x24) from [<c028a3f4>] (sysfs_write_file+0x100/0x148)
<4>[ 237.956481] [<c028a3f4>] (sysfs_write_file+0x100/0x148) from [<c023a0f8>] (vfs_write+0xa8/0x180)
<4>[ 237.964721] [<c023a0f8>] (vfs_write+0xa8/0x180) from [<c023a3e8>] (sys_write+0x34/0x68)
<4>[ 237.972595] [<c023a3e8>] (sys_write+0x34/0x68) from [<c0106120>] (ret_fast_syscall+0x0/0x30)
<4>[ 237.982147] ---[ end trace da227214a82491c8 ]---
<3>[ 245.350189] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 245.356719] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 245.362152] afe_send_hw_delay: config cmd failed
<6>[ 250.620727] SLIM_CL: skip reconfig sequence
<3>[ 250.700622] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 250.707305] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 250.712829] afe_send_hw_delay: config cmd failed
<6>[ 254.915313] SLIM_CL: skip reconfig sequence
<3>[ 258.102020] ACDB=> get_hw_delay: Path = 0 samplerate = 48000 usec = 0 status 0
<3>[ 258.109100] afe_callback: cmd = 0x100dc returned error = 0x3
<3>[ 258.114227] afe_send_hw_delay: config cmd failed
<6>[ 275.903686] msm_vidc_dec: Inside vid_dec_open()
<4>[ 275.907257]
<4>[ 275.907257] res_trk_download_firmware(): Request firmware download
<4>[ 275.949737]
<4>[ 275.949737] VIDC: vidc_freq = 266670000, req_perf_lvl = 244801, set_perf_lvl = 244801
<3>[ 275.965454] Rate 266670000 for vcodec_clk is greater than highest Fmax
<6>[ 275.984374] fw_version 8:30:2013
<4>[ 276.108154]
<4>[ 276.108154] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
<6>[ 276.118316] WARNING: H264MaxLevelExceeded : 51
<6>[ 276.121643] profile 4 level 0 progressive 1
<4>[ 276.125823]
<4>[ 276.125854] VIDC: vidc_freq = 200000000, req_perf_lvl = 244800, set_perf_lvl = 244800
<4>[ 276.135559]
<4>[ 276.135589] VIDC: vidc_freq = 200000000, req_perf_lvl = 187680, set_perf_lvl = 244800

Do your have any installs or changes last time?
If yes - first method it is facotury defaults, or backup. Maybe you can only remove last installs..
Second - it hardware problem... power controller, maybe, or usb block

freask5 said:
Do your have any installs or changes last time?
If yes - first method it is facotury defaults, or backup. Maybe you can only remove last installs..
Second - it hardware problem... power controller, maybe, or usb block
Click to expand...
Click to collapse
Replacing battery helped

suleymanovemil8 said:
Replacing battery helped
Click to expand...
Click to collapse
Great)) Congratulations))

Samsung Galaxy A5 (2017) suddenly reboots

Hello everyone,
I successfully installed lineage-14.1 and twrp-3.1.1-0-a5y17lte 3 on my new Samsung Galaxy A5 (2017) a couple of weeks ago. First everything was fine, but recently it started to reboot sporadically and often hung in a boot loop. Once it gave strange sounds through the loud speakers when i pressed a button or other strange things (at that time logcat showed a lot of debug messages related to audio). I tried to remove most of the apps I had installed, removed the sdcard, the SIM, wiped normal cache and dalvik cache and reflashed it with 3 different nightly builds of LineageOs. Nothing helped. Often I had to interrupt the boot loop by pressing the <power>+<volume down> keys. Whenever I was able to enter TRWP recovery and reboot it seemed to be fine for some time but the same procedure started again after an hour or so.
Since this problem at the very beginning of the boot process a small red text is shown just before the boot logo - the problem is that it is so fast that I cannot read the (error?) message.
Does anybody know a way how to find out what this boot message could be ?
I have backed up the boot log (dmesg.log) and there some warnings with a call trace are shown.
It says something like "Attribute error_cnt: write permission without 'store'". Does anybody got a clue what that could mean and how I can solve the problem ?
There are also some minor error messages in the log that I did not consider so important - but I am really a newbie in that kind of devices and cant really judge it.
If somebody is interested I can provide the dmesg.log, recovery.log and a bugreport.zip of my device.
Here is are some of the error messages I found in the dmesg.log:
<4>[ 1.046739] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.046764] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.046780] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.046795] [0: swapper/0: 1] Modules linked in:
<4>[ 1.046813] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.14-g3d77bc46b82 #1
<4>[ 1.046828] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.046844] [0: swapper/0: 1] Call trace:
<4>[ 1.046865] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.046884] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.046904] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.046924] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.046944] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.046961] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.046978] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.046997] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047017] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047035] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047052] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047070] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047087] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047104] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.047121] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.047139] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.047157] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.047175] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.047194] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.047212] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.047241] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741e ]---
<6>[ 1.047442] [0: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 455, base_baud = 0) is a S3C6400/10
<4>[ 1.047640] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.047661] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.047676] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.047690] [0: swapper/0: 1] Modules linked in:
<4>[ 1.047708] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.14-g3d77bc46b82 #1
<4>[ 1.047722] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.047736] [0: swapper/0: 1] Call trace:
<4>[ 1.047755] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.047773] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.047792] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.047810] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.047829] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.047846] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.047862] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.047881] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047901] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047918] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047935] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047952] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047969] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047986] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.048003] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.048020] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.048039] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.048056] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.048075] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.048091] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.048106] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741f ]---
<4>[ 1.048985] [0: swapper/0: 1] [ExyRNG] passed the start-up test
<4>[ 1.050183] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.050207] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/include/linux/kref.h:47 set_current_rng+0x60/0x7c()
<4>[ 1.050222] [0: swapper/0: 1] Modules linked in:
<4>[ 1.050239] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.14-g3d77bc46b82 #1
<4>[ 1.050254] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.050268] [0: swapper/0: 1] Call trace:
<4>[ 1.050287] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.050304] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.050323] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.050341] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.050360] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.050377] [0: swapper/0: 1] [<ffffffc00001beac>] warn_slowpath_null+0x14/0x20
<4>[ 1.050395] [0: swapper/0: 1] [<ffffffc00032aee4>] set_current_rng+0x5c/0x7c
<4>[ 1.050412] [0: swapper/0: 1] [<ffffffc00032b498>] hwrng_register+0x1c0/0x23c
<4>[ 1.050430] [0: swapper/0: 1] [<ffffffc00032ba04>] exyswd_rng_probe+0x48/0x70
<4>[ 1.050448] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.050466] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.050483] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.050500] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.050517] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.050534] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.050551] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.050569] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.050586] [0: swapper/0: 1] [<ffffffc000cedd08>] exyswd_rng_init+0x34/0x70
<4>[ 1.050604] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.050623] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.050640] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.050654] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af7420 ]---
<6>[ 1.050813] [0: swapper/0: 1] ExyRNG: hwrng registered
<6>[ 1.050866] [0: swapper/0: 1] ExyRNG driver, (c) 2014 Samsung Electronics
<4>[ 1.046739] [0: swapper/0: 1] ------------[ cut here ]------------
<4>[ 1.046764] [0: swapper/0: 1] WARNING: CPU: 0 PID: 1 at ../../../../../../kernel/samsung/universal7880/drivers/base/core.c:558 device_create_file+0x80/0xb0()
<4>[ 1.046780] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
<4>[ 1.046795] [0: swapper/0: 1] Modules linked in:
<4>[ 1.046813] [0: swapper/0: 1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.14-g3d77bc46b82 #1
<4>[ 1.046828] [0: swapper/0: 1] Hardware name: Samsung A5Y17 LTE EUR HWID08 board based on Exynos 7880 (DT)
<0>[ 1.046844] [0: swapper/0: 1] Call trace:
<4>[ 1.046865] [0: swapper/0: 1] [<ffffffc000009404>] dump_backtrace+0x0/0x10c
<4>[ 1.046884] [0: swapper/0: 1] [<ffffffc000009520>] show_stack+0x10/0x1c
<4>[ 1.046904] [0: swapper/0: 1] [<ffffffc0002930f4>] _dump_stack+0x80/0xc4
<4>[ 1.046924] [0: swapper/0: 1] [<ffffffc00086de9c>] dump_stack+0xc/0x18
<4>[ 1.046944] [0: swapper/0: 1] [<ffffffc00001bdc0>] warn_slowpath_common+0x88/0xb0
<4>[ 1.046961] [0: swapper/0: 1] [<ffffffc00001be34>] warn_slowpath_fmt+0x4c/0x58
<4>[ 1.046978] [0: swapper/0: 1] [<ffffffc00036fbe0>] device_create_file+0x7c/0xb0
<4>[ 1.046997] [0: swapper/0: 1] [<ffffffc000326554>] s3c24xx_serial_probe+0x828/0x8dc
<4>[ 1.047017] [0: swapper/0: 1] [<ffffffc000375698>] platform_drv_probe+0x4c/0x9c
<4>[ 1.047035] [0: swapper/0: 1] [<ffffffc000373c20>] driver_probe_device+0xd4/0x238
<4>[ 1.047052] [0: swapper/0: 1] [<ffffffc000373e30>] __driver_attach+0x60/0x90
<4>[ 1.047070] [0: swapper/0: 1] [<ffffffc000372da4>] bus_for_each_dev+0x70/0x90
<4>[ 1.047087] [0: swapper/0: 1] [<ffffffc000373730>] driver_attach+0x1c/0x28
<4>[ 1.047104] [0: swapper/0: 1] [<ffffffc0003733fc>] bus_add_driver+0xf8/0x1cc
<4>[ 1.047121] [0: swapper/0: 1] [<ffffffc00037472c>] driver_register+0x90/0xe0
<4>[ 1.047139] [0: swapper/0: 1] [<ffffffc0003755c8>] __platform_driver_register+0x5c/0x68
<4>[ 1.047157] [0: swapper/0: 1] [<ffffffc000ced428>] s3c24xx_serial_modinit+0x48/0x58
<4>[ 1.047175] [0: swapper/0: 1] [<ffffffc0000026bc>] do_one_initcall+0xf4/0x188
<4>[ 1.047194] [0: swapper/0: 1] [<ffffffc000cc4afc>] kernel_init_freeable+0x144/0x1f4
<4>[ 1.047212] [0: swapper/0: 1] [<ffffffc00086ad78>] kernel_init+0x10/0xd0
<4>[ 1.047241] [0: swapper/0: 1] ---[ end trace 1bbce8ded3af741e ]---
<6>[ 1.047442] [0: swapper/0: 1] 13820000.uart: ttySAC2 at MMIO 0x13820000 (irq = 455, base_baud = 0) is a S3C6400/10
<4>[ 1.047640] [0: swapper/0: 1] ------------[ cut here ]------------

@quirxi, are you using a ram swapper? I don't know much about logs so i'm probably wrong.
Code:
<4>[ 1.047676] [0: swapper/0: 1] Attribute error_cnt: write permission without 'store'
It looks like to me a file has the wrong permissions.
Sent from my Samsung SM-A520W using XDA Labs

@iloveoreos
no - I dont use a ram swapper as far as I know. Not sure what this is really . For me it also looks like it has wrong permissions - I just wonder why ? Only used the standard procedure for installing lineageos and TWRP.
Now I restored the backup from the original image with TWRP and the strange thing is that the error occured again. So I reckon that its not the fault of lineageos or some software installed on it but the fault of either TWRP or a hardware problem. That is the only thing that is left after I changed anything else. Today I reflashed the stock rom with odin and till now the problem did not occur again. If it is going to happen again I reckon that it is a hardware problem else I my best guess is TWRP failure.

Would it work to change permissions manually?
Sent from my Samsung SM-A520W using XDA Labs

iloveoreos said:
Would it work to change permissions manually?
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
I dont really know how to do that. I wonder why a system app at boot time has problems with permissions since it should be running with the highest permissions anyway as far as I know ?

quirxi said:
I dont really know how to do that. I wonder why a system app at boot time has problems with permissions since it should be running with the highest permissions anyway as far as I know ?
Click to expand...
Click to collapse
Every file has certain permissions. You can change them with a root browser.(if you are rooted) You can also do it with twrp IF you know the commands good enough. (I do NOT)
Sent from my Samsung SM-A520W using XDA Labs

iloveoreos said:
Every file has certain permissions. You can change them with a root browser.(if you are rooted) You can also do it with twrp IF you know the commands good enough. (I do NOT)
Sent from my Samsung SM-A520W using XDA Labs
Click to expand...
Click to collapse
Not sure, but i guess that are normal unix/linux permissions that the files usually have, or am I mistaken ? That would be easy to change - just wonder why they are wrong ??

quirxi said:
Not sure, but i guess that are normal unix/linux permissions that the files usually have, or am I mistaken ? That would be easy to change - just wonder why they are wrong ??
Click to expand...
Click to collapse
I couldn't have one idea why, lol. You said you tried flashing a few times?
Sent from my Samsung SM-A520W using XDA Labs

Disable any modification related to entropy/random (magisk modules, initd, apps, etc).
Those permissions are sysfs attributes that can't be changed without compiling. I could be wrong!
Probably less relevant:
Try disabling CPU hotplugging and using only 1 clock for testing: /sys/devices/system/cpu/*
Selinux (and its audit logs)
Linux permissions chmod and chown.
Linux 'permissions' chattr.
Samsung uses vnswap by default to compress ram, probably not relevant.

I'm porting KVM for Samsung Galaxy S8 and got the same kernel panic like this. The kernel traceback suggest that `s3c24xx_serial_probe` might be the problem. Any ideas?

Develop Bugs

welcome