Develop Bugs

Huawei Ascend P1/U9200 Root

This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!

Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:

Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful

I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....

Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC

Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo

Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.

Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.

Build B218
Hi,
i have the Build B218.
Has anyone rooting?

B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps

The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!

Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!

arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema

b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror

jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor

Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=

WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.

JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?

Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse

Did not work on my Wind pentaband P1, the firmware version on mine is B105.

[Guide]How To Root,Install Custom Recovery And Flash Custom ROM On Motorola XPRT

Hello,
To All Motorola XPRT Users,
Motorola XPRT Is An Old Phone From Motorola Still With Android 2.2 Froyo. Due To It Is An Old Phone It Does Not Have Any Good Developer Support Or Choice Of Customizing With Custom Roms.
So Here I'll Be Instructing You On How To Root , Install CWM - Clock Work Mode Recovery And Flash A Few Custom Rom.
Let's Get Started Then !
Click to expand...
Click to collapse
Official Disclaimer
1. I Am Not Responsible For Any Damage To Your Phone Please Proceed At Your Own Risk.
2. The Methods Given Here Are Tested And If You Follow The To The Word It Sure Won't Brick Your Phone.
3. Even If You Somehow Brick Your Phone Or Get Stuck On Anything Please Let Me Know.
Click to expand...
Click to collapse
Pre-Requites :
1. It Is Recommended To Fully Charge Your Phone Or At Least Keep 80% Charge Just To Be Safe.
2. Keep A Backup Of Everything . It Will Help You To Get Your Data If You Do Something Wrong.
3. Go To Your Phone's Settings > Applications > Check The Box With Unknown Sources Written .
Go To The Development Options > Check USB Debugging
Click to expand...
Click to collapse
Root Your Device :
Download These File(s)
1. Super One Click
Follow As Written :
1. Download and place the SuperOneClick archive onto your Desktop.
2. Unzip files from the archive to your Desktop.
3. Turn ON the USB debugging option on your device by going to Menu>>Settings>>Applications>>Development>>USB debugging.
4. Once enabled, connect your device to your PC using the USB cable.
5. Double-click on the SuperOneClick executable file and it’ll launch.
6. Click on Root button in the app and it’ll start rooting your device.
7. Once your device’s rooted, reboot it.
8. And you’re all done!
Excellent! Your device has been successfully rooted and is equipped with the Superuser app for managing root permissions.
Click to expand...
Click to collapse
Install Clock Work Mode Recovery [CWMR]
Download These File(s):
1.Droid 2 Recovery Bootstrap
Follow As Written :
1. Download and install the Droid 2 Bootstrap app on your device using the link given above.
2. Once installed, launch it from your App Drawer.
3. Tap on Bootstrap Recovery button in the app.
4. Follow the on-screen instructions.
5. And you’re done!
Great! The recovery’s been successfully installed on your XPRT and you should be able to boot into the same by choosing Reboot Recovery option in the app!
Click to expand...
Click to collapse
Flash Custom Roms,
[Note : Please Make A Backup Using The CWMR To Revert back If Something May Go Wrong]
Rom Links For Your Phone :
1. Cyanogenmod 7 (Unofficial) for the Motorola XPRT
2. CyanogenMod 9 for Motorola XPRT
I'll Update If I Get Something More
Instructions To Install
1. After you download the .zip to your computer, plug in your device via USB cable.[Choose Any Rom For Your Device]
2. Copy the .zip file to the SD Card (do NOT extract it, just copy the whole zip file).
3. Unplug your device.
4. Now, open Droid 2 Bootstrap app .
5. Select Reboot into Recovery and wait for the device to reboot.
6. Once in recovery mode, use the volume buttons to navigate and power button to select Backup and Recovery.
7. Then select Backup and hit yes to confirm. Wait for it to finish backing up your current system (this will save you if something goes wrong).
8. Select Wipe Data / Factory Reset.
9. Select Flash zip from sdcard.
10. Select Choose zip from sdcard.
11. Find the ROM we copied to the sdcard in .zip format and select it. Then select yes to confirm. Wait for it to finish flashing.
12. Select Reboot System Now. Once it reboots (which will take a while the first time), you’ll be running the new ROM
Click to expand...
Click to collapse
So,
Enjoy.
Credits
1. Short fuse
2. Rom Authors
Click to expand...
Click to collapse
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse
Post Your Experience.

Reserved
Reserved For Future

[ROOT] Oppo Recovery + Root method for Find 7 X9076

***
All thanks go to our awesome XDA-Developers, the developers at Oppo, and also to scumpicule for this working root method.
It doesn't require any alterations to the recovery system, just stick with the one that Oppo has provided.
This has only been tested on the X9076, it should theoretically work for other versions of the Find 7 as well, but please do this under your own discretion.
**Update: It has been reported that the newest Rom release of 1.2.2i or 1.2.3i and onward might not work with this root method! If this is the case, you will need to use these instructions from this post: http://forum.xda-developers.com/showpost.php?p=53902937&postcount=10
________________________________________________________________________________
CONTINUE with these instructions if you have Rom Version: 1.2.1i, otherwise if you have updated, click on the above link ^
INSTRUCTIONS:
Download the "Find7_ROOT4.3_bbs.oppo.cn.zip" file.
** It is also available at:
http://forum.xda-developers.com/showthread.php?t=2739102&highlight=find+7 **
Then Copy/Paste it in your phone on your root folder
Turn Off your phone
Simultaneously press the buttons ' power ' and 'volume down ' until you feel a vibration.
Your phone will reboot into recovery mode. ( Should be the OPPO recovery ! )
Select ' Choose English ' & Install zip file
Then choose the zip file that you have downloaded in step 1 & click "YES" to install.
Hit "Reboot" once everything is completed.
Go into app drawer and select the SuperSU app. Update the binary by selecting the "NORMAL" method.
Reopen SuperSU and make sure binary is okay.
Try downloading "Root Checker" or a app that requires root.
Congratulations, your device is now Rooted!!
________________________________________________________________________________
If you run into any errors, try updating the SuperSU binary again, or check under "NOTES" on the link above that scumpicule has posted.
________________________________________________________________________________
HIT THE THANKS BUTTON IF THIS HAS HELPED YOU.
Credits & Thanks
@karben @kedro @tk @Jimmy McGee
@scumpicule

installation failed unfortunately
i followed your steps and my device number is X9076

crackjas said:
installation failed unfortunately
i followed your steps and my device number is X9076
Click to expand...
Click to collapse
I'm pretty sure I used the same .zip file earlier today with the stock recovery, installation failed here too. (X9076).
Fortunately this worked perfectly: Click Here

binaryfalcon said:
I'm pretty sure I used the same .zip file earlier today with the stock recovery, installation failed here too. (X9076).
Fortunately this worked perfectly: Click Here
Click to expand...
Click to collapse
Thanks. It works!:good:

crackjas said:
installation failed unfortunately
i followed your steps and my device number is X9076
Click to expand...
Click to collapse
Were you able to get to SuperSU in the app drawer? Make sure that the binary was installed properly.
It's interesting because I was able to get it to work perfectly.
See attached photos of Root Checker.

Does not work on ColorOS 1.2.2i
I just got my Find 7 phone and after the OTA upgraded the system to 1.2.2i, when I tried to install the root file and it failed to install.

Installation Failed
No luck. Failed at the zip file installation part. Please let me know if you have any solution. Thanks. Cheers.:cyclops:

KoTP said:
No luck. Failed at the zip file installation part. Please let me know if you have any solution. Thanks. Cheers.:cyclops:
Click to expand...
Click to collapse
I'm having the same problem. When installing the zip from Oppo Recovery, it fails immediately every time. Tried both the Find7_ROOT4.3 and the Find7_GSM4.3 files. Any suggestions?

I think that after the update to 1.2.2i, the root might not work anymore. For all those that don't have it working, can you confirm if you have the 1.2.2i Rom version?
Sent from my X9076 using XDA Free mobile app

Good news!
I have found the Rooting method and instructions for Rom version 1.2.2i
It should work for every Oppo Find 7 and 7a (not confirmed) with any system (till 1.2.2i at least).
In the end system, bootloader and recovery will be intact - > stock rooted.
WORKING ON: x9077, x9076, x9006 (confirmed by #Oiler)
(NOTE):
Android SDK is required (which gives ADB and FASTBOOT files), if you have these files already on your computer, then you can just download TWRP, STOCK RECOVERY (oppo), and SUPERSU.
All the files are located below:
Preparation:
1. Phone with at least 30% battery.
2. Install Oppo drivers from "OPPO Driver" phone partition.
3. Download and unzip: AndroidSDKSlim - https://mega.co.nz/#!SEhFXbzL!Xy4PrX_NKFnAZvPaggQL-1Vw1PESzRCyqXiPrMlvWVM
4. Download: TWRP - https://mega.co.nz/#!gF0GhBzT!HGaWCcQfqr_ns2z7ZEIeeF-0KvXFliEOAFZ_Z-wHcdw and put it in "platform-tools" folder wich u get from zip above. (img file)
5. Download: Stock Recovery - https://mega.co.nz/#!rVQWXKhD!Ljy9pw_sy0VlKzxqJwuD4UoZGMwF_dOmOYWgR1mMRc4 Mod or Stock Recoveryhttp://ge.tt/2EQ5h2m1/v/0?c *2 and put it in "platform-tools" folder. (img file)
6. Download: SuperSU - http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1 and put it on phone internal storage. (do not unpack)
Changing Recovery Menu:
1. Turn Off phone.
2. Press Volume UP + Power
3. Now u should see small discription on screen: fastboot
5. Plug the phone to PC.
4. Open command prompt inside "platform-tools" folder -> press SHIFT + Right Mouse Click, pick open command prompt here.
5. Write:
Code:
fastboot devices
6. You should see:
Code:
"your phone product code" Dartmoor
7. If you don't see your device listed, make sure drivers are installed properly. Next, write:
Code:
fastboot flash recovery twrp-x9077.img
after few second you should see OKAY. (No need to turn off phone) *1
Rooting the phone:
1. Power off the phone.
2. Hold volume DOWN and the POWER button to get into the TWRP Recovery.
3. Pick install and find the SuperSU zip file, confirm the flash.
4. Reboot the phone. (cash and davlik wipe not nessesary)
5. Phone is now rooted. (Check if there is working SuperSU app. Update binary if needed.)
Restoring stock Recovery Menu:
1. Power off the phone.
2. Press Volume UP + Power
3. Open command prompt on your PC inside "platform-tools" folder -> press SHIFT + Right Mouse Click, pick open command prompt here.
4. Write:
Code:
fastboot flash recovery x9077-official-recovery-mod.img
after few second you should see OKAY.
5. REBOOT, or turn off phone by pressing POWER for 3 sec.
6. Check Recovery Menu (Volume DOWN + Power)
____________________________________________________________________
NOTES:
*1 turning off after installing Recovery Mod is unnecessary, this is because the phone won't startup automatically into the installed Recovery Mod.
*2 Stock Recovery is provided as genuine by #Zeus (Oppo Official Staff). The other one - Stock Recovery Mod is provided by #Kedros which have removed checking of Oppo system (provides possibility to install custom files like roms or SuperSU etc.). #Kedros confirmed that OTA update is still available on it.
____________________________________________________________________
Give a Like if it helped
SOURCE: Jach0o from OPPO forums

JiraffeLeung said:
I think that after the update to 1.2.2i, the root might not work anymore. For all those that don't have it working, can you confirm if you have the 1.2.2i Rom version?
Sent from my X9076 using XDA Free mobile app
Click to expand...
Click to collapse
Yes. Mine is 1.2.2i

Same for me on the version number. 1.2.2I I was hoping the process would be easier. Oh well.

The link to the TWRP recovery is down. I tried to download it in every possible way, but I always get an error. WHen I click download once I get to MEGA, it is saying "temporary error, retrying". Please fix, thanks.
Edit - NM working now, thanks just in case you fixed it.
Edit - Rooted phone, left TWRP on if I ever go to CM11s. Had to do a few things diffrent than what you said, but got it to work. Thanks
JiraffeLeung said:
Good news!
I have found the Rooting method and instructions for Rom version 1.2.2i
It should work for every Oppo Find 7 and 7a (not confirmed) with any system (till 1.2.2i at least).
In the end system, bootloader and recovery will be intact - > stock rooted.
WORKING ON: x9077, x9076, x9006 (confirmed by #Oiler)
(NOTE):
Android SDK is required (which gives ADB and FASTBOOT files), if you have these files already on your computer, then you can just download TWRP, STOCK RECOVERY (oppo), and SUPERSU.
All the files are located below:
Preparation:
1. Phone with at least 30% battery.
2. Install Oppo drivers from "OPPO Driver" phone partition.
3. Download and unzip: AndroidSDKSlim - https://mega.co.nz/#!SEhFXbzL!Xy4PrX_NKFnAZvPaggQL-1Vw1PESzRCyqXiPrMlvWVM
4. Download: TWRP - https://mega.co.nz/#!gF0GhBzT!HGaWCcQfqr_ns2z7ZEIeeF-0KvXFliEOAFZ_Z-wHcdw and put it in "platform-tools" folder wich u get from zip above. (img file)
5. Download: Stock Recovery - https://mega.co.nz/#!rVQWXKhD!Ljy9pw_sy0VlKzxqJwuD4UoZGMwF_dOmOYWgR1mMRc4 Mod or Stock Recoveryhttp://ge.tt/2EQ5h2m1/v/0?c *2 and put it in "platform-tools" folder. (img file)
6. Download: SuperSU - http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1 and put it on phone internal storage. (do not unpack)
Click to expand...
Click to collapse

Great stuff.
Feel free to share how you got it Rooted and which steps you took. It will help others here as well.
Sent from my X9076 using XDA Free mobile app

JiraffeLeung said:
Great stuff.
Feel free to share how you got it Rooted and which steps you took. It will help others here as well.
Sent from my X9076 using XDA Free mobile app
Click to expand...
Click to collapse
Total newbie. Could you explain preparation step 2 to me? (2. Install Oppo drivers from "OPPO Driver" phone partition.)
Will this method work with version 1.2.3i?
Many thanks.

Hey, yes the method should work for the most recent version as well. When you plug in your phone to you pc, it prompts you install the drivers from OPPO, just continue and install them.
If you don't see "Developer Options" in your settings ( in "More" ) then go into "About Phone" and click on "Build number" 5 times until you receive a message indicating that developer options is enabled.
Then plug in your phone and see if the drivers get updated. This process has been tested to work on Windows 7.
Sent from my X9076

I'm eager to try
JiraffeLeung said:
Hey, yes the method should work for the most recent version as well. When you plug in your phone to you pc, it prompts you install the drivers from OPPO, just continue and install them.
If you don't see "Developer Options" in your settings ( in "More" ) then go into "About Phone" and click on "Build number" 5 times until you receive a message indicating that developer options is enabled.
Then plug in your phone and see if the drivers get updated. This process has been tested to work on Windows 7.
Sent from my X9076
Click to expand...
Click to collapse
Thanks. Just waiting to find the time to try. I'll post the result.
Thanks again.

One more thing, you'll have to enable "USB Debugging" in developer options, then try plugging the phone in again.

Failed
JiraffeLeung said:
One more thing, you'll have to enable "USB Debugging" in developer options, then try plugging the phone in again.
Click to expand...
Click to collapse
Hi,
Thanks a lot for your help.
Though I'm pretty sure I've followed your instructions to the letter the phone would fail to install the update.SuperUser file so I can't get to get it rooted.
Any idea, suggestion, tip etc, will be much appreciated.
Thanks

How far were you able to get to? Any errors or freezing? What version of Rom are you on?

problem in rooting GT i9082(5.1.1)

I am using custom rom cyanognMod version-12.1-20150711-unofficial-i9082 and I am having problem with rooting my device.
custom rom gives develepment option in which i have option of root access but after doing this root cheker does not show root access.
I also tried method using update-superSU V1.25.zip then also root access is not sucessfully done.

barish3200 said:
I am using custom rom cyanognMod version-12.1-20150711-unofficial-i9082 and I am having problem with rooting my device.
custom rom gives develepment option in which i have option of root access but after doing this root cheker does not show root access.
I also tried method using update-superSU V1.25.zip then also root access is not sucessfully done.
Click to expand...
Click to collapse
Try this steps:
1. Goto pawitp's basketbuild all release here
2. Scroll down and look for cm-12.1-20160219-UNOFFICIAL-i9082.zip (Link) and cm-12.1-20160219_from_20160108_delta-UNOFFICIAL-i9082.zip (Link)
3. Download super SU 2.65 stable build Here
4. Download Open Gapps Here (Select Arm then 5.1 and Gapps you want)
5. After Downloading those 4 files Boot into Recovery
5. Wipe Data, Cache and Partition
6. Flash the cm-12.1-20160219-UNOFFICIAL-i9082.zip
7. Flash the update named cm-12.1-20160219_from_20160108_delta-UNOFFICIAL-i9082.zip
8. Flash your Gapps
9. Flash super SU
10. Reboot
DONE!
or
try to read this
I hope it helps.

Rooting 5.1.1 by very easiest method
You can root cm 12.1 by these simple steps...
1. Enable developer options by clicking build number 5 times
2. Then choose root access as apps and adb in developer option
3. Enable local terminal in developer option
4. Then download super user app from play store(DON'T OPEN IT)
5. Now goto terminal and type "su"
6. Goto super user app and click on " Normal installation method"
Hurrraaaayyyy rooting is done... hit on the thanks meter if it works for you... (it will definitely work for all cm12.1 )

[GUIDE] How To Flash TWRP And Root Xiaomi Mi Max

EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html

RESERVED

The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION

Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.

StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.

Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.

noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...

That's what I told you. Then please do.

noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !

Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing

Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!

So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.

Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?

So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.

Is there anyway to root the phone without connecting it to pc?

noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?