I am unable to flash either a recovery or boot. I get reply with devices , phone is unlocked.
Any idea how to overcome error?
C:\HTC>fastboot flash boot boot.img
sending 'boot' (5106 KB)... OKAY [ 0.618s]
writing 'boot'... INFOFormat partition LNX done
FAILED (remote: err = 0x30000)
finished. total time: 7.429s
C:\HTC>fastboot erase cache
erasing 'cache'... FAILED (remote: err = 0x19000008)
finished. total time: 0.080s
Thanks Fish
Hmm , tried on a different pc same error.
eventually wouldnt boot to recovery.
then bootloader said locked.
factory reset, now unlocked.
tried again still no flash.
left overnight, plugged into usb, flash erase worked and now flashed boot.img
fails on set up wizard stopped working.
will fully charge the try to install sebtinel rom from recovery.
Thread #3
Sent from my HTC One X using XDA Premium 4 mobile app
Hey guys, I've tried to hold off posting as long as possible and don't know what to search for to answer the question. I'll start from the beginning. I tried to flash a custom recovery after taking the OTA update to KK. I then rooted with IORoot and everything worked great. I used that Freegee app to try to flash TWRP 2.7 and it went into recovery, started flashing and then immediately rebooted. The Freegee app and other apps kept saying that I had the stock recovery even after multiple flash attemps. I then used the KK AutoRec tool because I thought that would allow for the custom recovery. After doing that, the phone was soft bricked and I was stuck in Fastboot. I used this: http://forum.xda-developers.com/showthread.php?t=2477595 to reflash everything except PrimaryGTP because I couldn't figure out how to do the PrimaryGTP portion. That worked great and my phone would reboot, but it rebooted into FTM mode with NO software buttons on it. After multiple reboots FTM mode will not exit. Here is the log of the adb terminal commands
C:\>fastboot erase recovery
erasing 'recovery'... OKAY
C:\>fastboot flash recovery recovery.img
sending 'recovery' (12288 KB)... OKAY
writing 'recovery'... OKAY
C:\>fastboot erase aboot
erasing 'aboot'... OKAY
C:\>fastboot flash aboot aboot.img
sending 'aboot' (1024 KB)... OKAY
writing 'aboot'... OKAY
C:\>fastboot reboot
rebooting...
C:\>fastboot erase modem
erasing 'modem'... OKAY
C:\>fastboot flash modem 1-modem
error: cannot load '1-modem'
C:\>fastboot flash modem modem.img
sending 'modem' (57856 KB)... OKAY
writing 'modem'... OKAY
C:\>fastboot erase boot
erasing 'boot'... OKAY
C:\>fastboot flash boot 6-boot.img
sending 'boot' (11264 KB)... OKAY
writing 'boot'... OKAY
C:\>fastboot erase PrimaryGPT
erasing 'PrimaryGPT'... FAILED (remote: Partition table doesn't exist
)
C:\>fastboot erase primarygpt
erasing 'primarygpt'... FAILED (remote: Partition table doesn't exist
)
C:\>fastboot erase sbl1
erasing 'sbl1'... OKAY
C:\>fastboot flash sbl1 2-sbl1.img
sending 'sbl1' (512 KB)... OKAY
writing 'sbl1'... OKAY
C:\>fastboot erase dbi
erasing 'dbi'... OKAY
C:\>fastboot flash dbi 3-dbi.img
sending 'dbi' (512 KB)... OKAY
writing 'dbi'... OKAY
C:\>fastboot erase aboot
erasing 'aboot'... OKAY
C:\>fastboot flash aboot aboot.img
sending 'aboot' (1024 KB)... OKAY
writing 'aboot'... OKAY
C:\>fastboot erase rpm
erasing 'rpm'... OKAY
C:\>fastboot flash rpm 5-rpm.img
sending 'rpm' (512 KB)... OKAY
writing 'rpm'... OKAY
C:\>fastboot erase boot
erasing 'boot'... OKAY
C:\>fastboot flash boot 6-boot.img
sending 'boot' (11264 KB)... OKAY
writing 'boot'... OKAY
C:\>fastboot erase tz
erasing 'tz'... OKAY
C:\>fastboot flash tz 7-tz.img
sending 'tz' (512 KB)... OKAY
writing 'tz'... OKAY
C:\>fastboot erase misc
erasing 'misc'... OKAY
C:\>fastboot flash misc 8-misc.img
sending 'misc' (8192 KB)... OKAY
writing 'misc'... OKAY
C:\>fastboot erase persist
erasing 'persist'... OKAY
C:\>fastboot flash persist persist.img
sending 'persist' (5120 KB)... OKAY
writing 'persist'... OKAY
C:\>fastboot reboot
rebooting...
C:\>adb devices
List of devices attached
C:\>^A
Click to expand...
Click to collapse
I then tried to flash stock TOT to start completely over because I thought that would work. This is the error I keep getting: (Picture below)
I then thought a factory reset would do the trick. I did that and it worked using the power button + Volume down method. It rebooted like normal as if it was completely stock yet the FTM mode is still on there. When I get into download mode and attach it into the LG Flash tool and that Firmware Update screen comes onto my phone, the box says:
910K S0.0 AS0.0 B99 UHS
S U LG-LS980 04.4.2 Hrev_10
LS980ZVC_12
ROOTED
Click to expand...
Click to collapse
I have no clue where to go from here. Please Help
Just an update if this helps. I can make calls with the "Q-Slide" feature, but I still don't have software buttons. The phone activated just like it should have and it shows everything great and I have LTE but after multiple restarts it still goes into FTM mode and I can't exit the mode when the phone is off. I just so happen to get lucky and get into the setting menu and hit update PRL and activate, which activated LTE. So thats one step forward I guess. Does anyone know whats going on?? In the LG flash tools both the PID and IMEI read: NULL.
I realize this has been discussed ad nauseam and after searching through all the posts on it I am a little confused about what my options are. My Nexus 7 2013 mobile is stuck on the Google logo. Here's what I have done..
First, I tried to simply wipe the cache partition to no avail.
Second, using the WugFresh Nexus toolkit I tried to unroot and flash stock to no avail. It would get to the point of flashing I would get remote failure error messages when trying to flash the radio etc,
Basically, all I have at this point, is the Google screen and access to fastboot and it's options and the Nexus is recognized by my computer through fastboot.
What are my options now?
Should I relock the bootloader and request Google repair it?
Or should I try to flash 4.4.4 manually through fastboot without a toolkit. If so, can you refresh my memory on how to do this?
I would appreciate any help you could provide. Thanks!
Try flashing 4.4.4 manually in fastboot. There are instructions on the page where you download the firmware. Did you flash 5.0 on a LTE model?
I did not flash 5.0. It froze during usage and I restarted it and then it suddenly would not boot past the Google logo. I did nothing to it.
I downloaded the factory image for 4.4.4 and followed instructions and ran the flash-all.bat and here is what the command prompt returns:
< waiting for device >
sending 'bootloader' (3911 KB)...
OKAY [ 0.152s]
writing 'bootloader'...
FAILED (remote: flash write failure)
finished. total time: 90.709s
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.006s
sending 'radio' (76038 KB)...
OKAY [ 3.034s]
writing 'radio'...
FAILED (remote: flash write failure)
finished. total time: 174.608s
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.006s
Is it time to relock the bootloader and hope Google will repair it?
Hey there,
as the title of the threat already indicates, my HTC One X got bricked.
As this usually happens when trying to flash some custom roms or recoverys, in my case it is the result of an official HTC update for android.
I can boot into Fastboot, and via cmd "fastboot devices" does show me the connected phone.
Now my approach for solving this matter was to flash the clockwork mod and then boot into recovery.
From there i wanted to pull data from the phone via adb commands.
The only problem is that my phone is locked. I cannot unlock it at the moment without wiping all data (which obviously would miss the whole data recovery point).
When i try tp flash the CWM in fastboot i get:
sending 'recovery' (8100 KB)...
FAILED (unknown status code)
finished. total time: 0.933s
I also tried to directly boot a recovery via fastboot boot recovery.img.
This resulted in
downloading 'boot.img'...
FAILED (unknown status code)
finished. total time: 0.933s
Well now I am seriously frustrated and dont know how to get my data.
Any help is very much appreciated.
Cheers
Josef
Update:
fastboot flash recovery recovery.img
target reported max download size of 1514139648 bytes
sending 'recovery' (8100 KB)...
OKAY [ 1.066s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.720s
fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.066s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.068s
fastboot boot recovery recovery.img
cannot load 'recovery': Permission denied
any help?
joe1000 said:
Update:
fastboot flash recovery recovery.img
target reported max download size of 1514139648 bytes
sending 'recovery' (8100 KB)...
OKAY [ 1.066s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.720s
fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 1.066s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.068s
fastboot boot recovery recovery.img
cannot load 'recovery': Permission denied
any help?
Click to expand...
Click to collapse
You must to unlock the device qith locked you can't do anything but if you unlock it is possible to wipe all data on the SD card
well but thats exactly the problem...
I was about to manually install the lineageOS update, but I accidentally swiped factory restore. Is there anyway I can get the update file online? I tried starting from the top by wiping everything and reinstalling the rom but it only boots me into TWRP. I also tried restoring backup files but is also boots me into TWRP. I am stuck.
PS: I tried the "fastboot continue" method but it boots me into TWRP.
reboot to fastboot mode. flash stock bootloader and recovery. reboot in stock recovery and then factory reset device and sideload firmware. alternatively you can flash raw firmware manually
sukhwant717 said:
reboot to fastboot mode. flash stock bootloader and recovery. reboot in stock recovery and then factory reset device and sideload firmware. alternatively you can flash raw firmware manually
Click to expand...
Click to collapse
Thank you for your response, Sir. I really appreciate it. Where do I get the stock bootloader and recovery, and how do I flash them? On the alternative method, do you mean I should install the stock rom? I'm sorry. I'm really not good at this; I'm just good at following tutorials. Is this what you're suggesting me to do? (XDA is now allowing me to write outside links. But here is the title of the tutorial from Asus Zentalk)
"[Experience Sharing] How to Relock Bootloader on ZenFone 2(ZE551ML ONLY)"
I have made a backup before I intalled the Lineage OS custom Rom. Can I use that instead of downloading new files, because the internet here is really bad. My problem is how I am going to install it. I tried restoring it but I keep on coming back to the TWRP.
Edit: I am now downloading the stock boot.img and recovery.img. I will be flashing them with ADB the ADB tool. Is this what you want to tell me? Then I will reboot in stock recovery, select factory reset and sideload firmware. I honestly don't get the "sideload firmware" part but can I use the one that I have backed up? How?
lemuelermita said:
Thank you for your response, Sir. I really appreciate it. Where do I get the stock bootloader and recovery, and how do I flash them? On the alternative method, do you mean I should install the stock rom? I'm sorry. I'm really not good at this; I'm just good at following tutorials. Is this what you're suggesting me to do? (XDA is now allowing me to write outside links. But here is the title of the tutorial from Asus Zentalk)
"[Experience Sharing] How to Relock Bootloader on ZenFone 2(ZE551ML ONLY)"
I have made a backup before I intalled the Lineage OS custom Rom. Can I use that instead of downloading new files, because the internet here is really bad. My problem is how I am going to install it. I tried restoring it but I keep on coming back to the TWRP.
Edit: I am now downloading the stock boot.img and recovery.img. I will be flashing them with ADB the ADB tool. Is this what you want to tell me? Then I will reboot in stock recovery, select factory reset and sideload firmware. I honestly don't get the "sideload firmware" part but can I use the one that I have backed up? How?
Click to expand...
Click to collapse
the backup you made you can flash only via twrp. if you have backup simply install it in twrp. but if still bootloops then you have to download firmware either from asus website or raw firmware from any other source. first try to flash backup in twrp. if you are unable to get into system them report back here. i will send you link to download raw firmware and instructions how to flash
sukhwant717 said:
the backup you made you can flash only via twrp. if you have backup simply install it in twrp. but if still bootloops then you have to download firmware either from asus website or raw firmware from any other source. first try to flash backup in twrp. if you are unable to get into system them report back here. i will send you link to download raw firmware and instructions how to flash
Click to expand...
Click to collapse
I tried to flash the backup but still no luck. Yes, please. Thank you very much!
I'm currently downloading the "CleanSTOCK-MM.223-v3.8[STABLE][Z00A]-6 May". I hope this will fix the problem. Do you think this will work 100%? I am afraid that it will boot again to TWRP after installing another rom. Which do you think is more efficient, installing a new rom or installing raw firmware?
lemuelermita said:
I tried to flash the backup but still no luck. Yes, please. Thank you very much!
I'm currently downloading the "CleanSTOCK-MM.223-v3.8[STABLE][Z00A]-6 May". I hope this will fix the problem. Do you think this will work 100%? I am afraid that it will boot again to TWRP after installing another rom. Which do you think is more efficient, installing a new rom or installing raw firmware?
Click to expand...
Click to collapse
raw is definitely best option. are you able to mount data and cache partition in TWRP
sukhwant717 said:
raw is definitely best option. are you able to mount data and cache partition in TWRP
Click to expand...
Click to collapse
I haven't tried that yet. How do I do that? Can you send me the links and instructions needed?
sukhwant717 said:
raw is definitely best option. are you able to mount data and cache partition in TWRP
Click to expand...
Click to collapse
Defensively smartest guy about phones in the world!!! ahaha <3
lemuelermita said:
I haven't tried that yet. How do I do that? Can you send me the links and instructions needed?
Click to expand...
Click to collapse
go to the following guide. see the section flash firmware without AFT and follow the instructions. keep in mind run each and every command even if any of them fails.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
go to the following guide. see the section flash firmware without AFT and follow the instructions. keep in mind run each and every command even if any of them fails.
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
Thank you very much, Sir! I will give you an update soon.
lemuelermita said:
Thank you very much, Sir! I will give you an update soon.
Click to expand...
Click to collapse
Followed the instructions on the link but my phone boots up on a blinking screen with an android saying "Error". The command prompt failed at steps 4,5, and 11.
C:\Users\Lemuel\Documents\RESTOCK>fastboot devices
F5AZFG14A156 fastboot
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem erase_osip_header
...
OKAY [ 0.217s]
finished. total time: 0.219s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem start_partitioning
...
(bootloader) Start partitioning
OKAY [ 0.228s]
finished. total time: 0.231s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash /tmp/partition.tbl partition.tbl
target reported max download size of 536870912 bytes
sending '/tmp/partition.tbl' (2 KB)...
OKAY [ 0.194s]
writing '/tmp/partition.tbl'...
FAILED (remote: not allowed to flash this partition)
finished. total time: 0.384s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash /tmp/partition.tbl partition.tbl
target reported max download size of 536870912 bytes
sending '/tmp/partition.tbl' (2 KB)...
OKAY [ 0.205s]
writing '/tmp/partition.tbl'...
FAILED (remote: not allowed to flash this partition)
finished. total time: 0.394s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem partition /tmp/partition.tbl
...
FAILED (remote: unknown OEM command)
finished. total time: 0.127s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase system
******** Did you mean to fastboot format this ext4 partition?
erasing 'system'...
OKAY [ 0.560s]
finished. total time: 0.561s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase cache
******** Did you mean to fastboot format this ext4 partition?
erasing 'cache'...
OKAY [ 0.232s]
finished. total time: 0.234s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase data
******** Did you mean to fastboot format this ext4 partition?
erasing 'data'...
OKAY [ 1.447s]
finished. total time: 1.448s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase APD
******** Did you mean to fastboot format this ext4 partition?
erasing 'APD'...
OKAY [ 0.290s]
finished. total time: 0.294s
C:\Users\Lemuel\Documents\RESTOCK>fastboot erase ADF
******** Did you mean to fastboot format this ext4 partition?
erasing 'ADF'...
OKAY [ 0.232s]
finished. total time: 0.234s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem wipe splashscreen
...
FAILED (remote: unknown OEM command)
finished. total time: 0.127s
C:\Users\Lemuel\Documents\RESTOCK>fastboot oem stop_partitioning
...
(bootloader) Stop partitioning
OKAY [ 0.210s]
finished. total time: 0.212s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash splashscreen splash_sign.bin
target reported max download size of 536870912 bytes
sending 'splashscreen' (270 KB)...
OKAY [ 0.192s]
writing 'splashscreen'...
OKAY [ 0.236s]
finished. total time: 0.431s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash token MFG_BOM_Full.bin
target reported max download size of 536870912 bytes
sending 'token' (3 KB)...
OKAY [ 0.194s]
writing 'token'...
OKAY [ 0.370s]
finished. total time: 0.566s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash ifwi ifwi-prod.bin
target reported max download size of 536870912 bytes
sending 'ifwi' (4096 KB)...
OKAY [ 0.294s]
writing 'ifwi'...
OKAY [ 1.027s]
finished. total time: 1.326s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash boot boot_sign.bin
target reported max download size of 536870912 bytes
sending 'boot' (11870 KB)...
OKAY [ 0.531s]
writing 'boot'...
OKAY [ 0.648s]
finished. total time: 1.182s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash recovery recovery_sign.bin
target reported max download size of 536870912 bytes
sending 'recovery' (11882 KB)...
OKAY [ 0.520s]
writing 'recovery'...
OKAY [ 0.636s]
finished. total time: 1.163s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash fastboot droidboot_sign.bin
target reported max download size of 536870912 bytes
sending 'fastboot' (14824 KB)...
OKAY [ 0.558s]
writing 'fastboot'...
OKAY [ 0.739s]
finished. total time: 1.302s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash APD APD.img
target reported max download size of 536870912 bytes
erasing 'APD'...
OKAY [ 0.204s]
sending 'APD' (183963 KB)...
OKAY [ 4.927s]
writing 'APD'...
OKAY [ 0.912s]
finished. total time: 6.049s
C:\Users\Lemuel\Documents\RESTOCK>fastboot flash system system.img
target reported max download size of 536870912 bytes
erasing 'system'...
OKAY [ 0.233s]
sending sparse 'system' 1/5 (518551 KB)...
OKAY [ 27.274s]
writing 'system' 1/5...
OKAY [ 5.563s]
sending sparse 'system' 2/5 (523662 KB)...
OKAY [ 22.886s]
writing 'system' 2/5...
OKAY [ 6.964s]
sending sparse 'system' 3/5 (520607 KB)...
OKAY [ 24.630s]
writing 'system' 3/5...
OKAY [ 8.077s]
sending sparse 'system' 4/5 (500735 KB)...
OKAY [ 23.704s]
writing 'system' 4/5...
OKAY [ 7.983s]
sending sparse 'system' 5/5 (188368 KB)...
OKAY [ 8.849s]
writing 'system' 5/5...
OKAY [ 1.187s]
finished. total time: 137.827s
C:\Users\Lemuel\Documents\RESTOCK>
C:\Users\Lemuel\Documents\RESTOCK>
C:\Users\Lemuel\Documents\RESTOCK>fastboot reboot
rebooting...
finished. total time: 0.126s
lemuelermita said:
Thank you very much, Sir! I will give you an update soon.
Click to expand...
Click to collapse
The command prompt failed at steps 4,5, and 11. It only boots in a blinking screen with an android saying, "Error". Tried it again for the second time but still boots in same screen. I tried to manually boot up the phone without the commands and worked. Thank you very much!
lemuelermita said:
The command prompt failed at steps 4,5, and 11. It only boots in a blinking screen with an android saying, "Error". Tried it again for the second time but still boots in same screen. I tried to manually boot up the phone without the commands and worked. Thank you very much!
Click to expand...
Click to collapse
hmm good to know device working again. strongly recommend you to perform a factory reset even device working perfectly.