[Q] Raise headphone volume - help needed - G3 Q&A, Help & Troubleshooting

[Q] Raise headphone volume - help needed - G3 Q&A, Help & Troubleshooting

anyone tried to make headphone out louder with mixer_paths.xml editing like in G2 days?
i tried to edit in mixer_paths.xml the following values but it did nothing:
Code:
...
<ctl name="HPHL Volume" value="20" />
<ctl name="HPHR Volume" value="20" />
<ctl name="RX1 Digital Volume" value="60" />
<ctl name="RX2 Digital Volume" value="60" />
...
there are also mixer_paths_auxpcm.xml and mixer_paths_qcwcn.xml in /system/etc so maybe there somewhere are the magic values to change.
all 3 files from D855 EUR on pastebin:
mixer_paths.xml
mixer_paths_auxpcm.xml
mixer_paths_qcwcn.xml
would be nice if a "pro" could have a look on it!

I would also appreciate someone looking into this. I am hearing impaired and think the volume for music is way too low with my high quality headphones on!
For some reason in-call volume is fine.

I went to system/etc then snd_soc_msm_2x folder and edited that on my lg g pad I assume it will be the same

snd_soc_msm_Taiko
maybe here?
Code:
...
SectionDevice
Name "Headphones"
Comment "Headset Rx device"
EnableSequence
'SLIM RX1 MUX':0:AIF1_PB
'SLIM RX2 MUX':0:AIF1_PB
'SLIM_0_RX Channels':0:Two
'RX1 MIX1 INP1':0:RX1
'RX2 MIX1 INP1':0:RX2
'CLASS_H_DSM MUX':0:DSM_HPHL_RX1
'HPHL DAC Switch':1:1
'COMP1 Switch':1:1
'HPHL Volume':1:100
'HPHR Volume':1:100
'RX1 Digital Volume':1:68
'RX2 Digital Volume':1:68
EndSequence
DisableSequence
'SLIM RX1 MUX':0:ZERO
'SLIM RX2 MUX':0:ZERO
'RX1 MIX1 INP1':0:ZERO
'RX2 MIX1 INP1':0:ZERO
'CLASS_H_DSM MUX':0:ZERO
'HPHL DAC Switch':1:0
'COMP1 Switch':1:0
'HPHL Volume':1:0
'HPHR Volume':1:0
'RX1 Digital Volume':1:0
'RX2 Digital Volume':1:0
EndSequence
ACDBID 10:1
EffectsMixerCTL "SRS TruMedia"
EC_REF_RXMixerCTL "SLIM_RX"
EndSection
...

paratox said:
snd_soc_msm_Taiko
maybe here?
Code:
...
SectionDevice
Name "Headphones"
Comment "Headset Rx device"
EnableSequence
'SLIM RX1 MUX':0:AIF1_PB
'SLIM RX2 MUX':0:AIF1_PB
'SLIM_0_RX Channels':0:Two
'RX1 MIX1 INP1':0:RX1
'RX2 MIX1 INP1':0:RX2
'CLASS_H_DSM MUX':0:DSM_HPHL_RX1
'HPHL DAC Switch':1:1
'COMP1 Switch':1:1
'HPHL Volume':1:100
'HPHR Volume':1:100
'RX1 Digital Volume':1:68
'RX2 Digital Volume':1:68
EndSequence
DisableSequence
'SLIM RX1 MUX':0:ZERO
'SLIM RX2 MUX':0:ZERO
'RX1 MIX1 INP1':0:ZERO
'RX2 MIX1 INP1':0:ZERO
'CLASS_H_DSM MUX':0:ZERO
'HPHL DAC Switch':1:0
'COMP1 Switch':1:0
'HPHL Volume':1:0
'HPHR Volume':1:0
'RX1 Digital Volume':1:0
'RX2 Digital Volume':1:0
EndSequence
ACDBID 10:1
EffectsMixerCTL "SRS TruMedia"
EC_REF_RXMixerCTL "SLIM_RX"
EndSection
...
Click to expand...
Click to collapse
dont edit that...
what you were editing is correct, but you dont change HPHL & HPHR, you only edit RX1 Digital Volume & RX2 Digital Volume.
the defualt value is 60, i find anything over 65 makes music distorted. make sure the permissions are still -rw-r--r-- after editing.
depending on your device model - D850/1/5 etc, etc, software - AOSP/stock, you may have to edit all 3 to make sure you edit the right files. CM only has mixer_paths.xml
SORRY FOR BUMPING, JUST REALISED POSTED DATE.

Related

[Q] Change camcorder maximum time limit - CM11

Running CM11 nightlies and using the packaged camera/camcorder.
All video recordings automatically cut off at exactly 10 minutes for both 1080 and 720 quality.
This is not a size issue, there are over 10Gb of space left after a 10 minute video records.
I've attempted recording to both the internal SD and an external SD with the same results.
Is there a way to change the maximum time limit for the CM11 camcorder?
I'm comfortable experimenting with Terminal Emulator or ES File Manager, I just don't really know how to go about doing it.

Some additional information:
The recorded files aren't close to 2Gb or 4Gb, so I don't think it's a partitioning issues.
And since it always cuts off at exactly 10 minutes, I don't think it's a heat issue, buffering issue, power issue, or any other hardware limitation.
If the CM11 camcorder is the android stock camcorder I came across the profile.
Google "android developer camcorder profile" and it's the first link. (I can't link URLs yet.)
There is a duration field in there that automatically cuts off the video after a certain time, I just don't know how to change it.

And this is my media_profiles.xml file in case it's helpful:
<!--
Copyright (C) 2010 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
apache dot org / licenses / LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!--
Copyright (c) 2012, The Linux Foundation. All rights reserved.
Not a Contribution, Apache license notifications and license are retained
for attribution purposes only.
-->
<!--
This file is used to declare the multimedia profiles and capabilities
on an android-powered device.
-->
<MediaSettings>
<!--
Each camcorder profile defines a set of predefined configuration parameters
-->
<!-- Back Camera -->
<CamcorderProfiles cameraId="0">
<EncoderProfile quality="low" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="high" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="17000000" width="1920" height="1080" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="qcif" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="qvga" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="767000" width="320" height="240" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="3078000" width="640" height="480" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="12000000" width="1280" height="720" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="1080p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="17000000" width="1920" height="1080" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="17000000" width="1920" height="1080" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="767000" width="320" height="240" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="3078000" width="640" height="480" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="12000000" width="1280" height="720" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapse1080p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="17000000" width="1920" height="1080" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<ImageEncoding quality="95"/>
<ImageEncoding quality="80"/>
<ImageEncoding quality="70"/>
<ImageDecoding memCap="20000000"/>
</CamcorderProfiles>
<!-- Front Camera -->
<CamcorderProfiles cameraId="1">
<EncoderProfile quality="low" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="high" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="12000000" width="1280" height="720" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="qcif" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="qvga" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="767000" width="320" height="240" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="480p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="3078000" width="640" height="480" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="720p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="12000000" width="1280" height="720" frameRate="30"/>
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="2"/>
</EncoderProfile>
<EncoderProfile quality="timelapselow" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapsehigh" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="17000000" width="1920" height="1080" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapseqcif" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="384000" width="176" height="144" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapseqvga" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="767000" width="320" height="240" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapse480p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="3078000" width="640" height="480" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<EncoderProfile quality="timelapse720p" fileFormat="mp4" duration="30">
<Video codec="h264" bitRate="12000000" width="1280" height="720" frameRate="30"/>
<!--
The Audio part of the profile will not be used since time lapse mode
does not capture audio
-->
<Audio codec="aac" bitRate="128000" sampleRate="48000" channels="1"/>
</EncoderProfile>
<ImageEncoding quality="95"/>
<ImageEncoding quality="80"/>
<ImageEncoding quality="70"/>
<ImageDecoding memCap="20000000"/>
</CamcorderProfiles>
<EncoderOutputFileFormat name="3gp"/>
<EncoderOutputFileFormat name="mp4"/>
<!--
If a codec is not enabled, it is invisible to the applications
In other words, the applications won't be able to use the codec
or query the capabilities of the codec at all if it is disabled
-->
<VideoEncoderCap name="h264" enabled="true" minBitRate="64000" maxBitRate="20000000" minFrameWidth="176" maxFrameWidth="1920" minFrameHeight="144" maxFrameHeight="1080" minFrameRate="1" maxFrameRate="30"/>
<VideoEncoderCap name="h263" enabled="true" minBitRate="64000" maxBitRate="1000000" minFrameWidth="176" maxFrameWidth="800" minFrameHeight="144" maxFrameHeight="480" minFrameRate="1" maxFrameRate="30"/>
<VideoEncoderCap name="m4v" enabled="true" minBitRate="64000" maxBitRate="20000000" minFrameWidth="176" maxFrameWidth="1920" minFrameHeight="144" maxFrameHeight="1080" minFrameRate="1" maxFrameRate="30"/>
<AudioEncoderCap name="aac" enabled="true" minBitRate="8192" maxBitRate="196000" minSampleRate="8000" maxSampleRate="48000" minChannels="1" maxChannels="2"/>
<!--
<AudioEncoderCap name="heaac" enabled="true"
minBitRate="8000" maxBitRate="64000"
minSampleRate="16000" maxSampleRate="48000"
minChannels="1" maxChannels="1" />
<AudioEncoderCap name="aaceld" enabled="true"
minBitRate="16000" maxBitRate="192000"
minSampleRate="16000" maxSampleRate="48000"
minChannels="1" maxChannels="1" />
<AudioEncoderCap name="amrwb" enabled="true"
minBitRate="6600" maxBitRate="23050"
minSampleRate="16000" maxSampleRate="16000"
minChannels="1" maxChannels="1" />
<AudioEncoderCap name="amrnb" enabled="true"
minBitRate="5525" maxBitRate="12200"
minSampleRate="8000" maxSampleRate="8000"
minChannels="1" maxChannels="1" />
<AudioEncoderCap name="lpcm" enabled="true"
minBitRate="768000" maxBitRate="4608000"
minSampleRate="48000" maxSampleRate="48000"
minChannels="1" maxChannels="6" />
-->
<!--
FIXME:
We do not check decoder capabilities at present
At present, we only check whether windows media is visible
for TEST applications. For other applications, we do
not perform any checks at all.
-->
<VideoDecoderCap name="wmv" enabled="false"/>
<AudioDecoderCap name="wma" enabled="false"/>
<!--
The VideoEditor Capability configuration:
- maxInputFrameWidth: maximum video width of imported video clip.
- maxInputFrameHeight: maximum video height of imported video clip.
- maxOutputFrameWidth: maximum video width of exported video clip.
- maxOutputFrameHeight: maximum video height of exported video clip.
- maxPrefetchYUVFrames: maximum prefetch YUV frames for encoder,
used to limit the amount of memory for prefetched YUV frames.
For this platform, it allows maximum 30MB(3MB per 1080p frame x 10
frames) memory.
-->
<VideoEditorCap maxInputFrameWidth="1920" maxInputFrameHeight="1088" maxOutputFrameWidth="1920" maxOutputFrameHeight="1080" maxPrefetchYUVFrames="10"/>
<!--
The VideoEditor Export codec profile and level values
correspond to the values in OMX_Video.h.
E.g. for h264, profile value 1 means OMX_VIDEO_AVCProfileBaseline
and level 4096 means OMX_VIDEO_AVCLevel41.
Please note that the values are in decimal.
These values are for video encoder.
-->
<!--
Codec = h.264, Baseline profile, level 4.0
-->
<ExportVideoProfile name="h264" profile="1" level="2048"/>
<!--
Codec = h.263, Baseline profile, level 70
-->
<ExportVideoProfile name="h263" profile="1" level="128"/>
<!--
Codec = mpeg4, Simple profile, level 5
-->
<ExportVideoProfile name="m4v" profile="1" level="128"/>
</MediaSettings>

HELP NEEDED modifying Mixer_path.xml for in-call volume

Hey guys... this question is for all the advanced android junkies out there. currently sporting the LG optimus G e973 on the SlimKat 4.4.4 build 6 rom. My in-call volume (the speaker pressed against your ear) is low and i would like to increase it. Some mixed_path files identify the device name as "ear" but mine doesnt. I need help isolating the device name and to increase it's value.
This is my xml file... can anyone help find the source ? slimforums havnt been much of help
<!-- These are the initial mixer settings -->
<!-- NOTE: For all the mixer controls added under usecases or sound devices -->
<!-- we should have an initial mixer setting (default value) -->
<ctl name="Voice Rx Device Mute" value="0" />
<ctl name="Voice Tx Mute" value="0" />
<ctl name="Voice Rx Volume" value="0" />
<ctl name="TTY Mode" value="Off" />
<ctl name="LINEOUT1 Volume" value="12" />
<ctl name="LINEOUT2 Volume" value="12" />
<ctl name="LINEOUT3 Volume" value="12" />
<ctl name="LINEOUT4 Volume" value="12" />
<ctl name="LINEOUT5 Volume" value="12" />
<ctl name="HPHL Volume" value="6" />
<ctl name="HPHR Volume" value="6" />
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="RX5 Digital Volume" value="84" />
<ctl name="RX6 Digital Volume" value="84" />
<ctl name="RX7 Digital Volume" value="84" />
<ctl name="ADC1 Volume" value="3" />
<ctl name="ADC2 Volume" value="3" />
<ctl name="ADC3 Volume" value="3" />
<ctl name="ADC4 Volume" value="3" />
<ctl name="ADC5 Volume" value="3" />
<ctl name="ADC6 Volume" value="3" />
<ctl name="DEC1 Volume" value="84" />
<ctl name="DEC2 Volume" value="84" />
<ctl name="DEC3 Volume" value="84" />
<ctl name="DEC4 Volume" value="84" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC6 Volume" value="84" />
<ctl name="DEC7 Volume" value="84" />
<ctl name="DEC8 Volume" value="84" />
<ctl name="DEC9 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />
<ctl name="MICBIAS1 CAPLESS Switch" value="1" />
<ctl name="MICBIAS2 CAPLESS Switch" value="0" />
<ctl name="MICBIAS3 CAPLESS Switch" value="0" />
<ctl name="SLIMBUS_3_RX Port Mixer INTERNAL_BT_SCO_RX" value="0" />
<ctl name="HDMI_RX Port Mixer SLIM_3_TX" value="0" />
<ctl name="INTERNAL_BT_SCO_RX Port Mixer SLIM_1_TX" value="0" />
<ctl name="SLIMBUS_1_RX Port Mixer INTERNAL_BT_SCO_TX" value="0" />
<ctl name="SLIMBUS_0_RX Port Mixer SLIM_0_TX" value="0" />
<ctl name="SLIMBUS_3_RX_Voice Mixer Voice Stub" value="0" />
<ctl name="SLIMBUS_1_RX Mixer Voice Stub" value="0" />
<ctl name="STUB_RX Mixer Voice Stub" value="0" />
<ctl name="Voice Stub Tx Mixer STUB_TX_HL" value="0" />
<ctl name="Voice Stub Tx Mixer INTERNAL_BT_SCO_TX" value="0" />
<ctl name="Voice Stub Tx Mixer SLIM_1_TX" value="0" />
<ctl name="Voice Stub Tx Mixer STUB_1_TX_HL" value="0" />
<ctl name="Voice Stub Tx Mixer SLIM_3_TX" value="0" />
<ctl name="INTERNAL_BT_SCO_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="INTERNAL_BT_SCO_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="INTERNAL_BT_SCO_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="HDMI_RX_Voice Mixer Voice Stub" value="0" />
<ctl name="INTERNAL_BT_SCO_RX_Voice Mixer Voice Stub" value="0" />
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="0" />
<ctl name="HDMI Mixer MultiMedia1" value="0" />
<ctl name="HDMI Mixer MultiMedia2" value="0" />
<ctl name="HDMI Mixer MultiMedia5" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="IIR1 INP1 MUX" value="ZERO" />
<ctl name="SLIM TX10 MUX" value="ZERO" />
<ctl name="SLIM TX9 MUX" value="ZERO" />
<ctl name="SLIM TX8 MUX" value="ZERO" />
<ctl name="SLIM TX7 MUX" value="ZERO" />
<ctl name="SLIM TX6 MUX" value="ZERO" />
<ctl name="SLIM TX5 MUX" value="ZERO" />
<ctl name="SLIM TX4 MUX" value="ZERO" />
<ctl name="SLIM TX3 MUX" value="ZERO" />
<ctl name="SLIM TX2 MUX" value="ZERO" />
<ctl name="SLIM TX1 MUX" value="ZERO" />
<ctl name="DEC10 MUX" value="ZERO" />
<ctl name="DEC9 MUX" value="ZERO" />
<ctl name="DEC8 MUX" value="ZERO" />
<ctl name="DEC7 MUX" value="ZERO" />
<ctl name="DEC6 MUX" value="ZERO" />
<ctl name="DEC5 MUX" value="ZERO" />
<ctl name="DEC4 MUX" value="ZERO" />
<ctl name="DEC3 MUX" value="ZERO" />
<ctl name="DEC2 MUX" value="ZERO" />
<ctl name="DEC1 MUX" value="ZERO" />
<ctl name="RX3 MIX2 INP2" value="ZERO" />
<ctl name="RX3 MIX2 INP1" value="ZERO" />
<ctl name="RX2 MIX2 INP2" value="ZERO" />
<ctl name="RX2 MIX2 INP1" value="ZERO" />
<ctl name="RX1 MIX2 INP2" value="ZERO" />
<ctl name="RX1 MIX2 INP1" value="ZERO" />
<ctl name="RX7 MIX1 INP2" value="ZERO" />
<ctl name="RX7 MIX1 INP1" value="ZERO" />
<ctl name="RX6 MIX1 INP2" value="ZERO" />
<ctl name="RX6 MIX1 INP1" value="ZERO" />
<ctl name="RX5 MIX1 INP2" value="ZERO" />
<ctl name="RX5 MIX1 INP1" value="ZERO" />
<ctl name="RX4 MIX1 INP2" value="ZERO" />
<ctl name="RX4 MIX1 INP1" value="ZERO" />
<ctl name="RX3 MIX1 INP2" value="ZERO" />
<ctl name="RX3 MIX1 INP1" value="ZERO" />
<ctl name="RX2 MIX1 INP2" value="ZERO" />
<ctl name="RX2 MIX1 INP1" value="ZERO" />
<ctl name="RX1 MIX1 INP3" value="ZERO" />
<ctl name="RX1 MIX1 INP2" value="ZERO" />
<ctl name="RX1 MIX1 INP1" value="ZERO" />
<ctl name="RX6 DSM MUX" value="CIC_OUT" />
<ctl name="RX4 DSM MUX" value="CIC_OUT" />
<ctl name="HPHL DAC Switch" value="0" />
<ctl name="DAC1 Switch" value="0" />
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM_3_RX Channels" value="One" />
<ctl name="HDMI_RX Channels" value="Two" />
<!-- These are audio route (FE to BE) specific mixer settings -->
<path name="deep-buffer-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback hdmi">
<ctl name="HDMI Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback speaker-and-hdmi">
<path name="deep-buffer-playback hdmi" />
<path name="deep-buffer-playback" />
</path>
<path name="deep-buffer-playback bt-sco">
<ctl name="INTERNAL_BT_SCO_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="low-latency-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback hdmi">
<ctl name="HDMI Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback bt-sco">
<ctl name="INTERNAL_BT_SCO_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback speaker-and-hdmi">
<ctl name="HDMI Mixer MultiMedia5" value="1" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="multi-channel-playback hdmi">
<ctl name="HDMI Mixer MultiMedia2" value="1" />
</path>
<path name="audio-record">
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="1" />
</path>
<path name="audio-record bt-sco">
<ctl name="MultiMedia1 Mixer INTERNAL_BT_SCO_TX" value="1" />
</path>
<path name="low-latency-record">
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="1" />
</path>
<path name="low-latency-record bt-sco">
<ctl name="MultiMedia5 Mixer INTERNAL_BT_SCO_TX" value="1" />
</path>
<path name="voice-call">
<ctl name="STUB_RX Mixer Voice Stub" value="1" />
<ctl name="Voice Stub Tx Mixer STUB_TX_HL" value="1" />
<ctl name="Voice Stub Tx Mixer STUB_1_TX_HL" value="1" />
</path>
<path name="voice-call hdmi">
<ctl name="Voice Stub Tx Mixer SLIM_3_TX" value="1" />
<ctl name="HDMI_RX_Voice Mixer Voice Stub" value="1" />
<ctl name="HDMI_RX Port Mixer SLIM_3_TX" value="1" />
<ctl name="Voice Stub Tx Mixer STUB_TX_HL" value="1" />
</path>
<path name="voice-call bt-sco">
<ctl name="Internal BTSCO SampleRate" value="8000" />
<ctl name="Voice Stub Tx Mixer INTERNAL_BT_SCO_TX" value="1" />
<ctl name="SLIMBUS_1_RX Mixer Voice Stub" value="1" />
<ctl name="Voice Stub Tx Mixer SLIM_1_TX" value="1" />
<ctl name="INTERNAL_BT_SCO_RX_Voice Mixer Voice Stub" value="1" />
<ctl name="SLIMBUS_1_RX Port Mixer INTERNAL_BT_SCO_TX" value="1" />
<ctl name="INTERNAL_BT_SCO_RX Port Mixer SLIM_1_TX" value="1" />
<ctl name="SLIM_3_RX Channels" value="One" />
<ctl name="SLIMBUS_3_RX_Voice Mixer Voice Stub" value="1" />
<ctl name="SLIMBUS_3_RX Port Mixer INTERNAL_BT_SCO_RX" value="1" />
</path>
<!-- These are actual sound device specific mixer settings -->
<path name="dmic1">
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC7" />
<ctl name="DEC7 MUX" value="DMIC1" />
</path>
<path name="adc1">
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC6" />
<ctl name="DEC6 MUX" value="ADC1" />
</path>
<path name="adc2">
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC8" />
<ctl name="DEC8 MUX" value="ADC2" />
</path>
<path name="adc3">
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC4" />
<ctl name="DEC4 MUX" value="ADC3" />
</path>
<path name="speaker">
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="RX3 MIX1 INP1" value="RX1" />
<ctl name="RX3 MIX1 INP2" value="RX6" />
<ctl name="RX4 DSM MUX" value="DSM_INV" />
<ctl name="SLIM TX3 MUX" value="RMIX3" />
</path>
<path name="speaker-reverse">
<!-- mono speaker, no channel swap here -->
<path name="speaker" />
</path>
<path name="speaker-mic">
<path name="adc3" />
<ctl name="DEC4 Volume" value="99" />
</path>
<path name="handset">
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RX1 MIX1 INP2" value="RX6" />
<ctl name="EAR PA Gain" value="POS_6_DB" />
<ctl name="DAC1 Switch" value="1" />
<ctl name="SLIM TX3 MUX" value="RMIX1" />
</path>
<path name="handset-mic">
<path name="adc1" />
<ctl name="DEC6 Volume" value="99" />
</path>
<path name="headphones">
<ctl name="SLIM_0_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RX1 MIX1 INP2" value="RX6" />
<ctl name="RX2 MIX1 INP1" value="RX2" />
<ctl name="RX2 MIX1 INP2" value="RX7" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="SLIM TX3 MUX" value="RMIX1" />
<ctl name="SLIM TX5 MUX" value="RMIX2" />
</path>
<path name="headset-mic">
<path name="adc2" />
<ctl name="ADC2 Volume" value="2" />
</path>
<path name="voice-handset-tmus">
<path name="handset" />
</path>
<path name="voice-speaker">
<path name="speaker" />
</path>
<path name="voice-speaker-mic">
<path name="adc3" />
<ctl name="DEC4 Volume" value="87" />
</path>
<path name="voice-headphones">
<path name="headphones" />
</path>
<path name="voice-headset-mic">
<path name="headset-mic" />
</path>
<path name="speaker-and-headphones">
<path name="headphones" />
<ctl name="RX3 MIX1 INP1" value="RX1" />
<ctl name="RX3 MIX1 INP2" value="RX6" />
<ctl name="RX5 MIX1 INP1" value="RX2" />
<ctl name="RX5 MIX1 INP2" value="RX7" />
<ctl name="RX4 DSM MUX" value="DSM_INV" />
<ctl name="RX6 DSM MUX" value="DSM_INV" />
</path>
<path name="hdmi">
</path>
<path name="speaker-and-hdmi">
<path name="speaker" />
<path name="hdmi" />
</path>
<path name="voice-rec-mic">
<path name="adc1" />
<ctl name="ADC1 Volume" value="2" />
</path>
<path name="camcorder-mic">
<path name="adc1" />
<ctl name="DEC6 Volume" value="89" />
</path>
<path name="hdmi-mic">
<path name="dmic1" />
</path>
<path name="bt-sco-headset">
</path>
<path name="bt-sco-mic">
</path>
<!-- Dual MIC devices -->
<path name="dmic-endfire">
<ctl name="SLIM TX7 MUX" value="DEC7" />
<ctl name="DEC7 MUX" value="ADC1" />
<ctl name="SLIM TX8 MUX" value="DEC9" />
<ctl name="DEC9 MUX" value="ADC3" />
<ctl name="SLIM_0_TX Channels" value="Two" />
<ctl name="RX1 MIX2 INP1" value="IIR1" />
<ctl name="RX2 MIX2 INP1" value="IIR1" />
<ctl name="IIR1 INP1 Volume" value="63" />
<ctl name="IIR1 INP1 MUX" value="DEC7" />
</path>
<path name="dmic-broadside">
<ctl name="SLIM TX7 MUX" value="DEC7" />
<ctl name="DEC7 MUX" value="DMIC1" />
<ctl name="SLIM TX8 MUX" value="DEC8" />
<ctl name="DEC8 MUX" value="DMIC2" />
<ctl name="SLIM_0_TX Channels" value="Two" />
<ctl name="IIR1 INP1 Volume" value="63" />
<ctl name="IIR1 INP1 MUX" value="DEC7" />
</path>
<path name="speaker-dmic-endfire">
<ctl name="SLIM TX7 MUX" value="DEC7" />
<ctl name="DEC7 MUX" value="ADC1" />
<ctl name="SLIM TX8 MUX" value="DEC9" />
<ctl name="DEC9 MUX" value="ADC3" />
<ctl name="SLIM_0_TX Channels" value="Two" />
</path>
<path name="speaker-dmic-broadside">
<ctl name="SLIM TX7 MUX" value="DEC7" />
<ctl name="DEC7 MUX" value="DMIC1" />
<ctl name="SLIM TX8 MUX" value="DEC8" />
<ctl name="DEC8 MUX" value="DMIC2" />
<ctl name="SLIM_0_TX Channels" value="Two" />
</path>
<path name="voice-dmic-ef-tmus">
<path name="dmic-endfire" />
</path>
<path name="voice-dmic-ef">
<path name="dmic-endfire" />
</path>
<path name="voice-dmic-bs">
<path name="dmic-broadside" />
</path>
<path name="voice-speaker-dmic-ef">
<path name="speaker-dmic-endfire" />
</path>
<path name="voice-speaker-dmic-bs">
<path name="speaker-dmic-broadside" />
</path>
<path name="voice-rec-dmic-ef">
<path name="dmic-endfire" />
</path>
<path name="voice-rec-dmic-bs">
<path name="dmic-broadside" />
</path>
<path name="voice-rec-dmic-ef-fluence">
<path name="dmic-endfire" />
</path>
<path name="voice-rec-dmic-bs-fluence">
<path name="dmic-broadside" />
</path>
<!-- TTY devices -->
<path name="tty-headphones">
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="RX1 MIX1 INP1" value="RX6" />
<ctl name="RX1 MIX1 INP2" value="RX6" />
<ctl name="HPHL DAC Switch" value="1" />
<ctl name="HPHL Volume" value="9" />
<ctl name="HPHR Volume" value="9" />
</path>
<path name="voice-tty-full-headphones">
<ctl name="TTY Mode" value="FULL" />
<path name="tty-headphones" />
</path>
<path name="voice-tty-vco-headphones">
<ctl name="TTY Mode" value="VCO" />
<path name="tty-headphones" />
</path>
<path name="voice-tty-hco-handset">
<ctl name="TTY Mode" value="HCO" />
<path name="handset" />
</path>
<path name="voice-tty-full-headset-mic">
<path name="adc2" />
</path>
<path name="voice-tty-hco-headset-mic">
<path name="adc2" />
</path>
<path name="voice-tty-vco-handset-mic">
<path name="adc1" />
</path>
</mixer>

If you still don't found solution for your problem.
open mixer-xml with text editor and tweak bellow mentioned values then save it. Then you can overwrite on exsting file.
For speaker tweak these values to any suitable number but don't exceed 95, Default is 84. Sometimes too high value may damage speakers. So be cautious.
[Bctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="RX5 Digital Volume" value="84" />
<ctl name="RX6 Digital Volume" value="84" />
<ctl name="RX7 Digital Volume" value="84" /> set values to > 84][/B] and check. Range between 89 & 92 is advisable.
For In-call volume, same principle applies simply change following values
[B<ctl name="DEC1 Volume" value="84" />
<ctl name="DEC2 Volume" value="84" />
<ctl name="DEC3 Volume" value="84" />
<ctl name="DEC4 Volume" value="84" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC6 Volume" value="84" />
<ctl name="DEC7 Volume" value="84" />
<ctl name="DEC8 Volume" value="84" />
<ctl name="DEC9 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />] set above 84
after making changes to your mixer_xml save it & set permission to rw-r-r
then reboot.
Now check yhe volume.
Hope this helps

And which line(s) regulates audio recording level? My Viewsonic v500 has low but very distorted volume on recorded tracks. On high picks, it knocks the speaker. It happens no meter what app I use for recording. It also happens while recording video. Audio record just sucks!

Hi, you can install a kernel with fauxsound support and just tweak the values there easily.
Alternatively I would advise you to disassemble your phone following the guidelines carefully and clean up the earpiece. You cannot imagine how much dirt gets stuck there and how it affects sound volume. I ended up scratching the earpiece grid from the back to remove dirt and the volume increased dramatically.

furkandeger said:
Hi, you can install a kernel with fauxsound support and just tweak the values there easily.
Alternatively I would advise you to disassemble your phone following the guidelines carefully and clean up the earpiece. You cannot imagine how much dirt gets stuck there and how it affects sound volume. I ended up scratching the earpiece grid from the back to remove dirt and the volume increased dramatically.
Click to expand...
Click to collapse
Is there a proper disassembly guideline available for this phone ?

hackenggr said:
Is there a proper disassembly guideline available for this phone ?
Click to expand...
Click to collapse
Check this video on youtube: https://www.youtube.com/watch?v=JotQxJUNFiM
There are other similar videos as well. Check those too before starting the procedure yourself.

drishd said:
If you still don't found solution for your problem.
open mixer-xml with text editor and tweak bellow mentioned values then save it. Then you can overwrite on exsting file.
For speaker tweak these values to any suitable number but don't exceed 95, Default is 84. Sometimes too high value may damage speakers. So be cautious.
[Bctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="RX5 Digital Volume" value="84" />
<ctl name="RX6 Digital Volume" value="84" />
<ctl name="RX7 Digital Volume" value="84" /> set values to > 84][/B] and check. Range between 89 & 92 is advisable.
For In-call volume, same principle applies simply change following values
[B<ctl name="DEC1 Volume" value="84" />
<ctl name="DEC2 Volume" value="84" />
<ctl name="DEC3 Volume" value="84" />
<ctl name="DEC4 Volume" value="84" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC6 Volume" value="84" />
<ctl name="DEC7 Volume" value="84" />
<ctl name="DEC8 Volume" value="84" />
<ctl name="DEC9 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />] set above 84
after making changes to your mixer_xml save it & set permission to rw-r-r
then reboot.
Now check yhe volume.
Hope this helps
Click to expand...
Click to collapse
Can I use this thing in stock KK rom rooted ? Stock KK not have mixer_xml file what other file these things will be if not in mixer ?
Thanks

hackenggr said:
Can I use this thing in stock KK rom rooted ? Stock KK not have mixer_xml file what other file these things will be if not in mixer ?
Thanks
Click to expand...
Click to collapse
Yes! Certainly. But b4 doing so pl backup existing mixer-xml so that always u can replace it, if something goes wrong.

[Q] Viper4android deactivates mic

hello everybody, please help me find the issue v4a caused in my mixers paths. My microphone is fully deactivated right now, I figured out because I am looking for the issue since 2Days, right now before I reflashed my OS via recovery so no data got lost and stock datas got resetted. after installing viper ( Installed as user App, after ask install flashed lollivipersurround for supporting Stereo Sound on my Z1c.. and the mic stopped working after driverinstalls reboot. now I'm really sure it's caused by v4a but I don't know how to fix it WITHOUT loosing my stereo Speaker sound (Earpiece is enabled for media)
I'll paste the mixer code here, so let's guess together what it might be, I'm really desperated right without call-ability
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="Voice Rx Device Mute" id="0" value="0" />
<ctl name="Voice Rx Device Mute" id="1" value="-1" />
<ctl name="Voice Rx Device Mute" id="2" value="20" />
<ctl name="Voice Tx Mute" id="0" value="0" />
<ctl name="Voice Tx Mute" id="1" value="-1" />
<ctl name="Voice Tx Mute" id="2" value="500" />
<ctl name="Voice Rx Gain" id="0" value="0" />
<ctl name="Voice Rx Gain" id="1" value="-1" />
<ctl name="Voice Rx Gain" id="2" value="20" />
<ctl name="TTY Mode" value="Off" />
<ctl name="LINEOUT1 Volume" value="12" />
<ctl name="LINEOUT2 Volume" value="12" />
<ctl name="LINEOUT3 Volume" value="12" />
<ctl name="LINEOUT4 Volume" value="12" />
<ctl name="HPHL Volume" value="16" />
<ctl name="HPHR Volume" value="16" />
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="RX5 Digital Volume" value="84" />
<ctl name="RX6 Digital Volume" value="84" />
<ctl name="RX7 Digital Volume" value="84" />
<ctl name="ADC1 Volume" value="13" />
<ctl name="ADC2 Volume" value="13" />
<ctl name="ADC3 Volume" value="13" />
<ctl name="ADC4 Volume" value="13" />
<ctl name="ADC5 Volume" value="13" />
<ctl name="ADC6 Volume" value="13" />
<ctl name="DEC1 Volume" value="84" />
<ctl name="DEC2 Volume" value="84" />
<ctl name="DEC3 Volume" value="84" />
<ctl name="DEC4 Volume" value="84" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC6 Volume" value="84" />
<ctl name="DEC7 Volume" value="84" />
<ctl name="DEC8 Volume" value="84" />
<ctl name="DEC9 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />
<ctl name="COMP0 Switch" value="0" />
<ctl name="COMP1 Switch" value="0" />
<ctl name="COMP2 Switch" value="0" />
<ctl name="SLIMBUS_3_RX Port Mixer MI2S_TX" value="0" />
<ctl name="HDMI_RX Port Mixer MI2S_TX" value="0" />
<ctl name="SLIMBUS_0_RX Port Mixer SLIM_0_TX" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia3" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="AUX_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SEC_AUX_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="0" />
<ctl name="Voice_Tx Mixer SEC_AUX_PCM_TX_Voice" value="0" />
<ctl name="HDMI_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SLIM_0_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia5 Mixer AFE_PCM_TX" value="0" />
<ctl name="MultiMedia4 Mixer MI2S_TX" value="0" />
<ctl name="MultiMedia1 Mixer MI2S_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_4_TX" value="0" />
<ctl name="MultiMedia1 Mixer SEC_AUX_PCM_UL_TX" value="0" />
<ctl name="HDMI Mixer MultiMedia1" value="0" />
<ctl name="HDMI Mixer MultiMedia2" value="0" />
<ctl name="HDMI Mixer MultiMedia3" value="0" />
<ctl name="HDMI Mixer MultiMedia4" value="0" />
<ctl name="HDMI Mixer MultiMedia5" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia3" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="IIR1 INP1 MUX" value="ZERO" />
<ctl name="SLIM TX10 MUX" value="ZERO" />
<ctl name="SLIM TX9 MUX" value="ZERO" />
<ctl name="SLIM TX8 MUX" value="ZERO" />
<ctl name="SLIM TX7 MUX" value="ZERO" />
<ctl name="SLIM TX6 MUX" value="ZERO" />
<ctl name="SLIM TX5 MUX" value="ZERO" />
<ctl name="SLIM TX4 MUX" value="ZERO" />
<ctl name="SLIM TX3 MUX" value="ZERO" />
<ctl name="SLIM TX2 MUX" value="ZERO" />
<ctl name="SLIM TX1 MUX" value="ZERO" />
<ctl name="DEC10 MUX" value="ZERO" />
<ctl name="DEC9 MUX" value="ZERO" />
<ctl name="DEC8 MUX" value="ZERO" />
<ctl name="DEC7 MUX" value="ZERO" />
<ctl name="DEC6 MUX" value="ZERO" />
<ctl name="DEC5 MUX" value="ZERO" />
<ctl name="DEC4 MUX" value="ZERO" />
<ctl name="DEC3 MUX" value="ZERO" />
<ctl name="DEC2 MUX" value="ZERO" />
<ctl name="DEC1 MUX" value="ZERO" />
<ctl name="RX2 MIX2 INP2" value="ZERO" />
<ctl name="RX2 MIX2 INP1" value="ZERO" />
<ctl name="RX1 MIX2 INP2" value="ZERO" />
<ctl name="RX1 MIX2 INP1" value="ZERO" />
<ctl name="RX7 MIX1 INP2" value="ZERO" />
<ctl name="RX7 MIX1 INP1" value="ZERO" />
<ctl name="RX6 MIX1 INP2" value="ZERO" />
<ctl name="RX6 MIX1 INP1" value="ZERO" />
<ctl name="RX5 MIX1 INP2" value="ZERO" />
<ctl name="RX5 MIX1 INP1" value="ZERO" />
<ctl name="RX4 MIX1 INP2" value="ZERO" />
<ctl name="RX4 MIX1 INP1" value="ZERO" />
<ctl name="RX3 MIX1 INP2" value="ZERO" />
<ctl name="RX3 MIX1 INP1" value="ZERO" />
<ctl name="RX2 MIX1 INP2" value="ZERO" />
<ctl name="RX2 MIX1 INP1" value="ZERO" />
<ctl name="RX1 MIX1 INP3" value="ZERO" />
<ctl name="RX1 MIX1 INP2" value="ZERO" />
<ctl name="RX1 MIX1 INP1" value="ZERO" />
<ctl name="HPHL DAC Switch" value="0" />
<ctl name="DAC1 Switch" value="0" />
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="EAR PA Gain" value="POS_6_DB" />
<ctl name="SLIM RX2 MUX" value="ZERO" />
<ctl name="SPK DRV Volume" value="7" />
<ctl name="AIF1_CAP Mixer SLIM TX7" value="0" />
<ctl name="AIF1_CAP Mixer SLIM TX8" value="0"/>
<ctl name="CLASS_H_DSM MUX" value="ZERO" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="AUX PCM SampleRate" value="8000" />
<!-- echo reference -->
<ctl name="EC_REF_RX" value="NONE" />
<!-- echo reference end -->
<ctl name="AFE_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="Voice_Tx Mixer AFE_PCM_TX_Voice" value="0" />
<!-- These are audio route (FE to BE) specific mixer settings -->
<path name="deep-buffer-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback hdmi">
<ctl name="HDMI Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback speaker-and-hdmi">
<path name="deep-buffer-playback hdmi" />
<path name="deep-buffer-playback" />
</path>
<path name="deep-buffer-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="deep-buffer-playback bt-sco" />
</path>
<path name="low-latency-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback hdmi">
<ctl name="HDMI Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="low-latency-playback bt-sco" />
</path>
<path name="low-latency-playback speaker-and-hdmi">
<path name="low-latency-playback hdmi" />
<path name="low-latency-playback" />
</path>
<path name="multi-channel-playback hdmi">
<ctl name="HDMI Mixer MultiMedia2" value="1" />
</path>
<path name="compress-offload-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback hdmi">
<ctl name="HDMI Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="compress-offload-playback bt-sco" />
</path>
<path name="compress-offload-playback speaker-and-hdmi">
<path name="compress-offload-playback hdmi" />
<path name="compress-offload-playback" />
</path>
<path name="audio-record">
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="1" />
</path>
<path name="audio-record bt-sco">
<ctl name="MultiMedia1 Mixer SEC_AUX_PCM_UL_TX" value="1" />
</path>
<path name="audio-record bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="audio-record bt-sco" />
</path>
<path name="low-latency-record">
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="1" />
</path>
<path name="voice-call">
<ctl name="SLIM_0_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="1" />
</path>
<path name="voice-call hdmi">
<ctl name="HDMI_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="1" />
</path>
<path name="voice-call bt-sco">
<ctl name="SEC_AUX_PCM_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SEC_AUX_PCM_TX_Voice" value="1" />
</path>
<path name="voice-call bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="voice-call bt-sco" />
</path>
<path name="voice-call afe-proxy">
<ctl name="AFE_PCM_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer AFE_PCM_TX_Voice" value="1" />
</path>
<path name="afe-proxy-playback afe-proxy">
</path>
<path name="afe-proxy-record afe-proxy">
</path>
<!-- These are actual sound device specific mixer settings -->
<path name="adc1">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC6" />
<ctl name="DEC6 MUX" value="ADC1" />
<ctl name="IIR1 INP1 MUX" value="DEC6" />
</path>
<path name="adc2">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC5" />
<ctl name="DEC5 MUX" value="ADC2" />
<ctl name="IIR1 INP1 MUX" value="DEC5" />
</path>
<path name="adc3">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC4" />
<ctl name="DEC4 MUX" value="ADC3" />
<ctl name="IIR1 INP1 MUX" value="DEC4" />
</path>
<path name="speaker">
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="SLIM RX2 MUX" value="AIF1_PB" />
<ctl name="SLIM_0_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RX7 MIX1 INP2" value="RX2" />
<ctl name="RX1 Digital Volume" value="90" />
<ctl name="RX7 Digital Volume" value="82" />
<ctl name="SPK DRV Volume" value="6" />
<ctl name="CLASS_H_DSM MUX" value="DSM_HPHL_RX1" />
<ctl name="DAC1 Switch" value="1" />
</path>
<path name="speaker-mic">
<path name="adc3" />
<ctl name="DEC4 Volume" value="99" />
</path>
<path name="handset">
<ctl name="SLIM RX1 MUX" value="AI

Flash this file with your recovery. It solved this problem for me.
WieserZ1C said:
hello everybody, please help me find the issue v4a caused in my mixers paths. My microphone is fully deactivated right now, I figured out because I am looking for the issue since 2Days, right now before I reflashed my OS via recovery so no data got lost and stock datas got resetted. after installing viper ( Installed as user App, after ask install flashed lollivipersurround for supporting Stereo Sound on my Z1c.. and the mic stopped working after driverinstalls reboot. now I'm really sure it's caused by v4a but I don't know how to fix it WITHOUT loosing my stereo Speaker sound (Earpiece is enabled for media)
I'll paste the mixer code here, so let's guess together what it might be, I'm really desperated right without call-ability
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="Voice Rx Device Mute" id="0" value="0" />
<ctl name="Voice Rx Device Mute" id="1" value="-1" />
<ctl name="Voice Rx Device Mute" id="2" value="20" />
<ctl name="Voice Tx Mute" id="0" value="0" />
<ctl name="Voice Tx Mute" id="1" value="-1" />
<ctl name="Voice Tx Mute" id="2" value="500" />
<ctl name="Voice Rx Gain" id="0" value="0" />
<ctl name="Voice Rx Gain" id="1" value="-1" />
<ctl name="Voice Rx Gain" id="2" value="20" />
<ctl name="TTY Mode" value="Off" />
<ctl name="LINEOUT1 Volume" value="12" />
<ctl name="LINEOUT2 Volume" value="12" />
<ctl name="LINEOUT3 Volume" value="12" />
<ctl name="LINEOUT4 Volume" value="12" />
<ctl name="HPHL Volume" value="16" />
<ctl name="HPHR Volume" value="16" />
<ctl name="RX1 Digital Volume" value="84" />
<ctl name="RX2 Digital Volume" value="84" />
<ctl name="RX3 Digital Volume" value="84" />
<ctl name="RX4 Digital Volume" value="84" />
<ctl name="RX5 Digital Volume" value="84" />
<ctl name="RX6 Digital Volume" value="84" />
<ctl name="RX7 Digital Volume" value="84" />
<ctl name="ADC1 Volume" value="13" />
<ctl name="ADC2 Volume" value="13" />
<ctl name="ADC3 Volume" value="13" />
<ctl name="ADC4 Volume" value="13" />
<ctl name="ADC5 Volume" value="13" />
<ctl name="ADC6 Volume" value="13" />
<ctl name="DEC1 Volume" value="84" />
<ctl name="DEC2 Volume" value="84" />
<ctl name="DEC3 Volume" value="84" />
<ctl name="DEC4 Volume" value="84" />
<ctl name="DEC5 Volume" value="84" />
<ctl name="DEC6 Volume" value="84" />
<ctl name="DEC7 Volume" value="84" />
<ctl name="DEC8 Volume" value="84" />
<ctl name="DEC9 Volume" value="84" />
<ctl name="DEC10 Volume" value="84" />
<ctl name="COMP0 Switch" value="0" />
<ctl name="COMP1 Switch" value="0" />
<ctl name="COMP2 Switch" value="0" />
<ctl name="SLIMBUS_3_RX Port Mixer MI2S_TX" value="0" />
<ctl name="HDMI_RX Port Mixer MI2S_TX" value="0" />
<ctl name="SLIMBUS_0_RX Port Mixer SLIM_0_TX" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia3" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="AUX_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SEC_AUX_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="0" />
<ctl name="Voice_Tx Mixer SEC_AUX_PCM_TX_Voice" value="0" />
<ctl name="HDMI_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SLIM_0_RX_Voice Mixer CSVoice" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia5 Mixer AFE_PCM_TX" value="0" />
<ctl name="MultiMedia4 Mixer MI2S_TX" value="0" />
<ctl name="MultiMedia1 Mixer MI2S_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_4_TX" value="0" />
<ctl name="MultiMedia1 Mixer SEC_AUX_PCM_UL_TX" value="0" />
<ctl name="HDMI Mixer MultiMedia1" value="0" />
<ctl name="HDMI Mixer MultiMedia2" value="0" />
<ctl name="HDMI Mixer MultiMedia3" value="0" />
<ctl name="HDMI Mixer MultiMedia4" value="0" />
<ctl name="HDMI Mixer MultiMedia5" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia3" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="IIR1 INP1 MUX" value="ZERO" />
<ctl name="SLIM TX10 MUX" value="ZERO" />
<ctl name="SLIM TX9 MUX" value="ZERO" />
<ctl name="SLIM TX8 MUX" value="ZERO" />
<ctl name="SLIM TX7 MUX" value="ZERO" />
<ctl name="SLIM TX6 MUX" value="ZERO" />
<ctl name="SLIM TX5 MUX" value="ZERO" />
<ctl name="SLIM TX4 MUX" value="ZERO" />
<ctl name="SLIM TX3 MUX" value="ZERO" />
<ctl name="SLIM TX2 MUX" value="ZERO" />
<ctl name="SLIM TX1 MUX" value="ZERO" />
<ctl name="DEC10 MUX" value="ZERO" />
<ctl name="DEC9 MUX" value="ZERO" />
<ctl name="DEC8 MUX" value="ZERO" />
<ctl name="DEC7 MUX" value="ZERO" />
<ctl name="DEC6 MUX" value="ZERO" />
<ctl name="DEC5 MUX" value="ZERO" />
<ctl name="DEC4 MUX" value="ZERO" />
<ctl name="DEC3 MUX" value="ZERO" />
<ctl name="DEC2 MUX" value="ZERO" />
<ctl name="DEC1 MUX" value="ZERO" />
<ctl name="RX2 MIX2 INP2" value="ZERO" />
<ctl name="RX2 MIX2 INP1" value="ZERO" />
<ctl name="RX1 MIX2 INP2" value="ZERO" />
<ctl name="RX1 MIX2 INP1" value="ZERO" />
<ctl name="RX7 MIX1 INP2" value="ZERO" />
<ctl name="RX7 MIX1 INP1" value="ZERO" />
<ctl name="RX6 MIX1 INP2" value="ZERO" />
<ctl name="RX6 MIX1 INP1" value="ZERO" />
<ctl name="RX5 MIX1 INP2" value="ZERO" />
<ctl name="RX5 MIX1 INP1" value="ZERO" />
<ctl name="RX4 MIX1 INP2" value="ZERO" />
<ctl name="RX4 MIX1 INP1" value="ZERO" />
<ctl name="RX3 MIX1 INP2" value="ZERO" />
<ctl name="RX3 MIX1 INP1" value="ZERO" />
<ctl name="RX2 MIX1 INP2" value="ZERO" />
<ctl name="RX2 MIX1 INP1" value="ZERO" />
<ctl name="RX1 MIX1 INP3" value="ZERO" />
<ctl name="RX1 MIX1 INP2" value="ZERO" />
<ctl name="RX1 MIX1 INP1" value="ZERO" />
<ctl name="HPHL DAC Switch" value="0" />
<ctl name="DAC1 Switch" value="0" />
<ctl name="SLIM_0_RX Channels" value="One" />
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="EAR PA Gain" value="POS_6_DB" />
<ctl name="SLIM RX2 MUX" value="ZERO" />
<ctl name="SPK DRV Volume" value="7" />
<ctl name="AIF1_CAP Mixer SLIM TX7" value="0" />
<ctl name="AIF1_CAP Mixer SLIM TX8" value="0"/>
<ctl name="CLASS_H_DSM MUX" value="ZERO" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="AUX PCM SampleRate" value="8000" />
<!-- echo reference -->
<ctl name="EC_REF_RX" value="NONE" />
<!-- echo reference end -->
<ctl name="AFE_PCM_RX_Voice Mixer CSVoice" value="0" />
<ctl name="Voice_Tx Mixer AFE_PCM_TX_Voice" value="0" />
<!-- These are audio route (FE to BE) specific mixer settings -->
<path name="deep-buffer-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback hdmi">
<ctl name="HDMI Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback speaker-and-hdmi">
<path name="deep-buffer-playback hdmi" />
<path name="deep-buffer-playback" />
</path>
<path name="deep-buffer-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia1" value="1" />
</path>
<path name="deep-buffer-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="deep-buffer-playback bt-sco" />
</path>
<path name="low-latency-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback hdmi">
<ctl name="HDMI Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia5" value="1" />
</path>
<path name="low-latency-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="low-latency-playback bt-sco" />
</path>
<path name="low-latency-playback speaker-and-hdmi">
<path name="low-latency-playback hdmi" />
<path name="low-latency-playback" />
</path>
<path name="multi-channel-playback hdmi">
<ctl name="HDMI Mixer MultiMedia2" value="1" />
</path>
<path name="compress-offload-playback">
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback hdmi">
<ctl name="HDMI Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback bt-sco">
<ctl name="SEC_AUX_PCM_RX Audio Mixer MultiMedia4" value="1" />
</path>
<path name="compress-offload-playback bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="compress-offload-playback bt-sco" />
</path>
<path name="compress-offload-playback speaker-and-hdmi">
<path name="compress-offload-playback hdmi" />
<path name="compress-offload-playback" />
</path>
<path name="audio-record">
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="1" />
</path>
<path name="audio-record bt-sco">
<ctl name="MultiMedia1 Mixer SEC_AUX_PCM_UL_TX" value="1" />
</path>
<path name="audio-record bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="audio-record bt-sco" />
</path>
<path name="low-latency-record">
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="1" />
</path>
<path name="voice-call">
<ctl name="SLIM_0_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="1" />
</path>
<path name="voice-call hdmi">
<ctl name="HDMI_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SLIM_0_TX_Voice" value="1" />
</path>
<path name="voice-call bt-sco">
<ctl name="SEC_AUX_PCM_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer SEC_AUX_PCM_TX_Voice" value="1" />
</path>
<path name="voice-call bt-sco-wb">
<ctl name="AUX PCM SampleRate" value="16000" />
<path name="voice-call bt-sco" />
</path>
<path name="voice-call afe-proxy">
<ctl name="AFE_PCM_RX_Voice Mixer CSVoice" value="1" />
<ctl name="Voice_Tx Mixer AFE_PCM_TX_Voice" value="1" />
</path>
<path name="afe-proxy-playback afe-proxy">
</path>
<path name="afe-proxy-record afe-proxy">
</path>
<!-- These are actual sound device specific mixer settings -->
<path name="adc1">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC6" />
<ctl name="DEC6 MUX" value="ADC1" />
<ctl name="IIR1 INP1 MUX" value="DEC6" />
</path>
<path name="adc2">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC5" />
<ctl name="DEC5 MUX" value="ADC2" />
<ctl name="IIR1 INP1 MUX" value="DEC5" />
</path>
<path name="adc3">
<ctl name="AIF1_CAP Mixer SLIM TX7" value="1"/>
<ctl name="SLIM_0_TX Channels" value="One" />
<ctl name="SLIM TX7 MUX" value="DEC4" />
<ctl name="DEC4 MUX" value="ADC3" />
<ctl name="IIR1 INP1 MUX" value="DEC4" />
</path>
<path name="speaker">
<ctl name="SLIM RX1 MUX" value="AIF1_PB" />
<ctl name="SLIM RX2 MUX" value="AIF1_PB" />
<ctl name="SLIM_0_RX Channels" value="Two" />
<ctl name="RX1 MIX1 INP1" value="RX1" />
<ctl name="RX7 MIX1 INP2" value="RX2" />
<ctl name="RX1 Digital Volume" value="90" />
<ctl name="RX7 Digital Volume" value="82" />
<ctl name="SPK DRV Volume" value="6" />
<ctl name="CLASS_H_DSM MUX" value="DSM_HPHL_RX1" />
<ctl name="DAC1 Switch" value="1" />
</path>
<path name="speaker-mic">
<path name="adc3" />
<ctl name="DEC4 Volume" value="99" />
</path>
<path name="handset">
<ctl name="SLIM RX1 MUX" value="AI
Click to expand...
Click to collapse

Samsung Galaxy Tab Pro 10.1 (picassowifi) volume problem - mixer_paths.xml

Hello everyone,
I have installed lineage-13.0-20170114-UNOFFICIAL-n2awifi of the tab pro 10.1 but having issues without volume when playing video.
I have found instructions online to modify the mixer_paths.xml file but It seems that some volume entries are missing. At the bottom of the post is the mixer_paths.xml content.
Does anyone know if something is missing from the file or what needs to be modified?
Thanks!
<mixer>
<!--
INOUT_MAP {
<ctl name="Earpiece", "Builtin Mic" />
<ctl name="Speaker", "Builtin Mic" />
<ctl name="Headset Out", "Headset In" />
<ctl name="Headphone", "Builtin Mic" />
<ctl name="SCO Headset Out", "SCO Headset In" />
<ctl name="SCO", "SCO Headset In" />
<ctl name="SCO Carkit", "SCO Headset In" />
}
INPUT_CHANNEL_MAP {
<ctl name="Builtin Mic", "Left" />
<ctl name="Back Mic", "Right" />
<ctl name="Headset In", "Left" />
<ctl name="Third Mic", "Left" />
<ctl name="SCO Headset In" value="None" />
}
-->
<!-- Initial mixer settings -->
<!-- Noise gate control -->
<ctl name="Noise Gate Switch" value="0" />,
<ctl name="HPOUT1L NG HPOUT1L Switch" value="0" />
<ctl name="HPOUT1R NG HPOUT1R Switch" value="0" />
<ctl name="HPOUT2L NG HPOUT2L Switch" value="0" />
<ctl name="HPOUT2R NG HPOUT2R Switch" value="0" />
<ctl name="EPOUT NG EPOUT Switch" value="0" />
<ctl name="SPKOUTL NG SPKOUTL Switch" value="0" />
<ctl name="SPKOUTR NG SPKOUTR Switch" value="0" />
<ctl name="SPKDAT1L NG SPKDAT1L Switch" value="0" />
<ctl name="SPKDAT1R NG SPKDAT1R Switch" value="0" />
<ctl name="Noise Gate Threshold Volume" value="0" />
<!-- Analog output AMP -->
<!-- AP Side is mixed to Input 1 of each out mixer -->
<!-- RCV(Mono) -->
<ctl name="EPOUT Input 1" value="AIF1RX1" />
<ctl name="EPOUT Input 2" value="AIF1RX2" />
<ctl name="EPOUT Digital Switch" value="1" />
<!-- SPK(Stereo) -->
<ctl name="SPKOUTL Input 1" value="AIF1RX1" />
<ctl name="SPKOUTR Input 1" value="AIF1RX2" />
<ctl name="Speaker Digital Switch" value="1" />
<!-- HP(stereo) -->
<ctl name="HPOUT1L Input 1" value="AIF1RX1" />
<ctl name="HPOUT1R Input 1" value="AIF1RX2" />
<ctl name="HPOUT1 Digital Switch" value="1" />
<!-- VPS(stereo) -->
<ctl name="HPOUT2L Input 1" value="AIF1RX1" />
<ctl name="HPOUT2R Input 1" value="AIF1RX2" />
<ctl name="OUT2 Digital Switch" value="1" />
<!-- BT <-AP(use input 1) -->
<!-- ASRC2(RX domain) -->
<ctl name="ASRC2L Input" value="AIF2RX1" />
<ctl name="ASRC2R Input" value="AIF2RX2" />
<!-- Currently use i2c dual mono(both L/R) -->
<!-- CP->RCV -->
<ctl name="EPOUT Input 3" value="None" />
<!-- CP->SPK -->
<ctl name="SPKOUTL Input 3" value="None" />
<ctl name="SPKOUTR Input 3" value="None" />
<!-- CP->HP -->
<ctl name="HPOUT1L Input 2" value="None" />
<ctl name="HPOUT1R Input 2" value="None" />
<!-- CP->BT -->
<ctl name="AIF3TX1 Input 2" value="AIF2RX1" />
<ctl name="AIF3TX2 Input 2" value="AIF2RX2" />
<!-- Route all mics via LHPF1 -->
<!-- need to move modifier field -->
<ctl name="LHPF1 Mode" value="High-pass" />
<ctl name="LHPF2 Mode" value="High-pass" />
<!-- BT mic->CP -->
<ctl name="AIF2TX1 Input 2" value="AIF3RX1" />
<ctl name="AIF2TX2 Input 2" value="AIF3RX2" />
<!-- Stereo recording from mics -->
<!-- need to move channeltype -->
<!-- Gain for main and headset mics -->
<ctl name="IN1L Volume" value="30" />
<ctl name="IN1R Volume" value="30" />
<!-- Gain for sub and 3rd mic -->
<ctl name="IN2L Volume" value="30" />
<ctl name="IN2R Volume" value="30" />
<!-- Mics to AIF2TX -->
<ctl name="ASRC1L Input" value="LHPF1" />
<ctl name="ASRC1R Input" value="LHPF2" />
<ctl name="AIF2TX1 Input 1" value="ASRC1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1R" />
<!-- BT<-CP(use input 2) -->
<ctl name="AIF1TX1 Input 2" value="ASRC2L" />
<ctl name="AIF1TX2 Input 2" value="ASRC2R" />
<!-- LHPF1 & 2 filter -->
<ctl name="LHPF1 COEFF FILTER" value="130Hz" />
<ctl name="LHPF2 COEFF FILTER" value="130Hz" />
<!-- common digital volume -->
<!-- don't change this common volume -->
<ctl name="AIF1TX1 Input 1 Volume" value="32" />
<ctl name="AIF1TX1 Input 2 Volume" value="32" />
<ctl name="AIF1TX1 Input 3 Volume" value="32" />
<ctl name="AIF1TX1 Input 4 Volume" value="32" />
<ctl name="AIF1TX2 Input 1 Volume" value="32" />
<ctl name="AIF1TX2 Input 2 Volume" value="32" />
<ctl name="AIF1TX2 Input 3 Volume" value="32" />
<ctl name="AIF1TX2 Input 4 Volume" value="32" />
<ctl name="AIF1TX3 Input 1 Volume" value="32" />
<ctl name="AIF1TX3 Input 2 Volume" value="32" />
<ctl name="AIF1TX3 Input 3 Volume" value="32" />
<ctl name="AIF1TX3 Input 4 Volume" value="32" />
<ctl name="AIF1TX4 Input 1 Volume" value="32" />
<ctl name="AIF1TX4 Input 2 Volume" value="32" />
<ctl name="AIF1TX4 Input 3 Volume" value="32" />
<ctl name="AIF1TX4 Input 4 Volume" value="32" />
<ctl name="AIF1TX5 Input 1 Volume" value="32" />
<ctl name="AIF1TX5 Input 2 Volume" value="32" />
<ctl name="AIF1TX5 Input 3 Volume" value="32" />
<ctl name="AIF1TX5 Input 4 Volume" value="32" />
<ctl name="AIF1TX6 Input 1 Volume" value="32" />
<ctl name="AIF1TX6 Input 2 Volume" value="32" />
<ctl name="AIF1TX6 Input 3 Volume" value="32" />
<ctl name="AIF1TX6 Input 4 Volume" value="32" />
<ctl name="AIF1TX7 Input 1 Volume" value="32" />
<ctl name="AIF1TX7 Input 2 Volume" value="32" />
<ctl name="AIF1TX7 Input 3 Volume" value="32" />
<ctl name="AIF1TX7 Input 4 Volume" value="32" />
<ctl name="AIF1TX8 Input 1 Volume" value="32" />
<ctl name="AIF1TX8 Input 2 Volume" value="32" />
<ctl name="AIF1TX8 Input 3 Volume" value="32" />
<ctl name="AIF1TX8 Input 4 Volume" value="32" />
<ctl name="AIF2TX1 Input 1 Volume" value="32" />
<ctl name="AIF2TX1 Input 2 Volume" value="32" />
<ctl name="AIF2TX1 Input 3 Volume" value="32" />
<ctl name="AIF2TX1 Input 4 Volume" value="32" />
<ctl name="AIF2TX2 Input 1 Volume" value="32" />
<ctl name="AIF2TX2 Input 2 Volume" value="32" />
<ctl name="AIF2TX2 Input 3 Volume" value="32" />
<ctl name="AIF2TX2 Input 4 Volume" value="32" />
<ctl name="AIF3TX1 Input 1 Volume" value="32" />
<ctl name="AIF3TX1 Input 2 Volume" value="32" />
<ctl name="AIF3TX1 Input 3 Volume" value="32" />
<ctl name="AIF3TX1 Input 4 Volume" value="32" />
<ctl name="AIF3TX2 Input 1 Volume" value="32" />
<ctl name="AIF3TX2 Input 2 Volume" value="32" />
<ctl name="AIF3TX2 Input 3 Volume" value="32" />
<ctl name="AIF3TX2 Input 4 Volume" value="32" />
<ctl name="Input Ramp Up" value="8ms/6dB" />
<ctl name="RCV Switch" value="0" />
<ctl name="SPK Switch" value="0" />
<ctl name="HP Switch" value="0" />
<ctl name="VPS Switch" value="0" />
<ctl name="HDMI Switch" value="0" />
<ctl name="Main Mic Switch" value="0" />
<ctl name="Sub Mic Switch" value="0" />
<ctl name="3rd Mic Switch" value="0" />
<ctl name="Headset Mic Switch" value="0" />
<ctl name="AIF2 Mode" value="Master" />
<!-- Channels -->
<path name="channel-left">
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF1" />
<ctl name="ASRC1L Input" value="LHPF1" />
<ctl name="ASRC1R Input" value="LHPF1" />
</path>
<path name="channel-right">
<ctl name="AIF1TX1 Input 1" value="LHPF2" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
<ctl name="ASRC1L Input" value="LHPF2" />
<ctl name="ASRC1R Input" value="LHPF2" />
</path>
<path name="channel-stereo">
<ctl name="AIF1TX1 Input 1" value="LHPF1" />
<ctl name="AIF1TX2 Input 1" value="LHPF2" />
<ctl name="ASRC1L Input" value="LHPF1" />
<ctl name="ASRC1R Input" value="LHPF2" />
</path>
<path name="channel-none">
<ctl name="AIF3TX1 Input 1" value="ASRC1L" />
<ctl name="AIF3TX2 Input 1" value="ASRC1R" />
<ctl name="ASRC1L Input" value="AIF1RX1" />
<ctl name="ASRC1R Input" value="AIF1RX2" />
</path>
<!-- Paths that roughly correspond to devices -->
<path name="speaker">
<ctl name="SPK Switch" value="1" />
</path>
<path name="earpiece">
<ctl name="RCV Switch" value="1" />
</path>
<path name="headphones">
<ctl name="HP Switch" value="1" />
</path>
<path name="sco-out">
<ctl name="AIF3TX1 Input 2" value="AIF2RX1" />
<ctl name="AIF3TX2 Input 2" value="AIF2RX2" />
</path>
<path name="dock">
<ctl name="VPS Switch" value="1" />
</path>
<path name="aux-digital">
<ctl name="HDMI Switch" value="1" />
</path>
<path name="aif2-stereo-mic">
<ctl name="AIF2TX1 Input 1" value="ASRC1L" />
<ctl name="AIF2TX2 Input 1" value="ASRC1R" />
</path>
<path name="builtin-mic">
<ctl name="Main Mic Switch" value="1" />
<ctl name="LHPF1 Input 1" value="IN1L" />
<ctl name="IN1L Volume" value="18" />
<ctl name="IN1L Digital Volume" value="150" />
</path>
<path name="back-mic">
<ctl name="Sub Mic Switch" value="1" />
<ctl name="LHPF2 Input 1" value="IN2L" />
<ctl name="IN2L Volume" value="17" />
<ctl name="IN2L Digital Volume" value="150" />
</path>
<path name="third-mic">
<ctl name="3rd Mic Switch" value="1" />
<ctl name="LHPF1 Input 1" value="IN2R" />
<ctl name="IN2R Volume" value="20" />
<ctl name="IN2R Digital Volume" value="150" />
</path>
<path name="headset-in">
<ctl name="Headset Mic Switch" value="1" />
<ctl name="HPOUT1L Input 3" value="None" />
<ctl name="HPOUT1R Input 3" value="None" />
<ctl name="LHPF1 Input 1" value="IN1R" />
<ctl name="IN1R Volume" value="30" />
<ctl name="IN1R Digital Volume" value="150" />
</path>
<path name="sco-in">
<ctl name="AIF2TX1 Input 2" value="AIF3RX1" />
<ctl name="AIF2TX2 Input 2" value="AIF3RX2" />
<ctl name="ASRC2L Input" value="AIF3RX1" />
<ctl name="ASRC2R Input" value="AIF3RX2" />
<ctl name="AIF2TX1 Input 1" value="None" />
<ctl name="AIF2TX2 Input 1" value="None" />
</path>
<!-- Paths used by HAL -->
<!-- Playback paths -->
<path name="voice-speaker">
<path name="speaker" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="SPKOUTL Input 3" value="ASRC2L" />
</path>
<path name="voice-earpiece">
<path name="earpiece" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="EPOUT Input 3" value="ASRC2L" />
</path>
<path name="voice-headphones">
<path name="headphones" />
<ctl name="AIF2 Mode" value="Slave" />
<ctl name="HPOUT1L Input 2" value="ASRC2L" />
<ctl name="HPOUT1R Input 2" value="ASRC2R" />
</path>
<path name="media-speaker">
<path name="speaker" />
</path>
<path name="media-earpiece">
<path name="earpiece" />
</path>
<path name="media-headphones">
<path name="headphones" />
</path>
<path name="voice-rec-speaker">
<path name="speaker" />
</path>
<path name="voice-rec-headphones">
<path name="headphones" />
</path>
<path name="communication-speaker">
<path name="speaker" />
</path>
<path name="communication-earpiece">
<path name="earpiece" />
</path>
<path name="communication-headphones">
<path name="headphones" />
</path>
<path name="speaker-and-headphones">
<path name="speaker" />
<path name="headphones" />
</path>
<path name="bt-sco-headset">
<path name="sco-out" />
<ctl name="AIF2 Mode" value="Slave" />
</path>
<!-- Capture paths -->
<path name="voice-main-mic">
<path name="channel-stereo" />
<path name="aif2-stereo-mic" />
<path name="builtin-mic" />
</path>
<path name="voice-headset-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="headset-in" />
</path>
<path name="media-main-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="builtin-mic" />
</path>
<path name="media-second-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="builtin-mic" />
<ctl name="IN1L Volume" value="25" />
</path>
<path name="media-headset-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="headset-in" />
</path>
<path name="voice-rec-main-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="builtin-mic" />
<ctl name="IN1L Volume" value="27" />
<ctl name="IN1L Digital Volume" value="152" />
</path>
<path name="communication-main-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="builtin-mic" />
</path>
<path name="bt-sco-mic">
<path name="channel-none" />
<path name="sco-in" />
</path>
<path name="voice-rec-headset-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="headset-in" />
</path>
<path name="communication-headset-mic">
<path name="channel-left" />
<path name="aif2-stereo-mic" />
<path name="headset-in" />
</path>
<path name="none">
<!-- Empty path -->
</path>
</mixer>

Leeco Le Max 2 Lineage OS microphone very low

Hi all,
i have Lex829 with Lineage OS 14.1 lastest nightly.
My microphone is very very low both in conversations and in whatsapp voice messages, i have tried with magisk and "android Mic Fix" but no improvement.
Now i'm trying to modify mixer_paths_letv.xml, but i can't find the right value to change.
Does anyone know how I can increase the volume of the microphone? there is another magisk module or xposed module?
This is my modified xml, do you know what values to change for the microphone of calls and recordings?
this is the first line, all file in the attachments:
<?xml version="1.0" encoding="ISO-8859-1"?>
<mixer>
<!-- These are the initial mixer settings -->
<ctl name="Voice Rx Device Mute" id="0" value="0" />
<ctl name="Voice Rx Device Mute" id="1" value="-1" />
<ctl name="Voice Rx Device Mute" id="2" value="20" />
<ctl name="Voice Tx Mute" id="0" value="0" />
<ctl name="Voice Tx Mute" id="1" value="-1" />
<ctl name="Voice Tx Mute" id="2" value="500" />
<ctl name="Voice Rx Gain" id="0" value="0" />
<ctl name="Voice Rx Gain" id="1" value="-1" />
<ctl name="Voice Rx Gain" id="2" value="20" />
<ctl name="Voip Tx Mute" id="0" value="0" />
<ctl name="Voip Tx Mute" id="1" value="500" />
<ctl name="Voip Rx Gain" id="0" value="0" />
<ctl name="Voip Rx Gain" id="1" value="20" />
<ctl name="Voip Mode Config" value="12" />
<ctl name="Voip Rate Config" value="0" />
<ctl name="Voip Evrc Min Max Rate Config" id="0" value="1" />
<ctl name="Voip Evrc Min Max Rate Config" id="1" value="4" />
<ctl name="Voip Dtx Mode" value="0" />
<ctl name="TTY Mode" value="OFF" />
<!--ctl name="LINEOUT1 Volume" value="13" /-->
<!--ctl name="LINEOUT2 Volume" value="13" /-->
<!--ctl name="LINEOUT3 Volume" value="13" /-->
<!--ctl name="LINEOUT4 Volume" value="13" /-->
<ctl name="HPHL Volume" value="20" />
<ctl name="HPHR Volume" value="20" />
<ctl name="RX0 Digital Volume" value="90" />
<ctl name="RX1 Digital Volume" value="90" />
<ctl name="RX2 Digital Volume" value="90" />
<ctl name="RX3 Digital Volume" value="90" />
<ctl name="RX4 Digital Volume" value="90" />
<ctl name="RX5 Digital Volume" value="90" />
<ctl name="RX6 Digital Volume" value="90" />
<ctl name="RX7 Digital Volume" value="90" />
<ctl name="RX8 Digital Volume" value="90" />
<ctl name="ADC1 Volume" value="13" />
<ctl name="ADC2 Volume" value="13" />
<ctl name="ADC3 Volume" value="13" />
<ctl name="ADC4 Volume" value="13" />
<ctl name="ADC5 Volume" value="13" />
<ctl name="ADC6 Volume" value="13" />
<ctl name="DEC0 Volume" value="95" />
<ctl name="DEC1 Volume" value="95" />
<ctl name="DEC2 Volume" value="95" />
<ctl name="DEC3 Volume" value="95" />
<ctl name="DEC4 Volume" value="95" />
<ctl name="DEC5 Volume" value="95" />
<ctl name="DEC6 Volume" value="95" />
<ctl name="DEC7 Volume" value="95" />
<ctl name="DEC8 Volume" value="95" />
<ctl name="COMP1 Switch" value="1" />
<ctl name="COMP2 Switch" value="1" />
<ctl name="COMP7 Switch" value="1" />
<ctl name="COMP8 Switch" value="1" />
<ctl name="RX HPH Mode" value="CLS_H_HIFI" />
<ctl name="SLIMBUS_3_RX Port Mixer MI2S_TX" value="0" />
<ctl name="HDMI_RX Port Mixer MI2S_TX" value="0" />
<ctl name="SLIMBUS_0_RX Port Mixer SLIM_0_TX" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia7" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia10" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia11" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia12" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia13" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia14" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia15" value="0" />
<ctl name="AUX_PCM_RX Audio Mixer MultiMedia16" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_4_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="MultiMedia5 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia5 Mixer AFE_PCM_TX" value="0" />
<ctl name="MultiMedia5 Mixer TERT_MI2S_TX" value="0" />
<!--ctl name="MultiMedia5 Mixer AUX_PCM_UL_TX" value="0" /-->
<!--ctl name="MultiMedia4 Mixer MI2S_TX" value="0" /-->
<ctl name="MultiMedia1 Mixer MI2S_TX" value="0" />
<!--ctl name="MultiMedia7 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia10 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia11 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia12 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia13 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia14 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia15 Mixer MI2S_TX" value="0" /-->
<!--ctl name="MultiMedia16 Mixer MI2S_TX" value="0" /-->
<ctl name="MultiMedia1 Mixer SLIM_0_TX" value="0" />
<ctl name="MultiMedia1 Mixer SLIM_4_TX" value="0" />
<ctl name="MultiMedia1 Mixer AUX_PCM_UL_TX" value="0" />
<ctl name="HDMI Mixer MultiMedia1" value="0" />
<ctl name="HDMI Mixer MultiMedia2" value="0" />
<ctl name="HDMI Mixer MultiMedia3" value="0" />
<ctl name="HDMI Mixer MultiMedia4" value="0" />
<ctl name="HDMI Mixer MultiMedia5" value="0" />
<ctl name="HDMI Mixer MultiMedia7" value="0" />
<ctl name="HDMI Mixer MultiMedia10" value="0" />
<ctl name="HDMI Mixer MultiMedia11" value="0" />
<ctl name="HDMI Mixer MultiMedia12" value="0" />
<ctl name="HDMI Mixer MultiMedia13" value="0" />
<ctl name="HDMI Mixer MultiMedia14" value="0" />
<ctl name="HDMI Mixer MultiMedia15" value="0" />
<ctl name="HDMI Mixer MultiMedia16" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia1" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia2" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia3" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia4" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia5" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia7" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia7" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia10" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia10" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia11" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia11" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia12" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia12" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia13" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia13" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia14" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia14" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia15" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia15" value="0" />
<ctl name="SLIMBUS_0_RX Audio Mixer MultiMedia16" value="0" />
<ctl name="SLIMBUS_5_RX Audio Mixer MultiMedia16" value="0" />
....

xmatrix83 said:
Hi all,
i have Lex829 with Lineage OS 14.1 lastest nightly. My microphone is very very low both in conversations and in whatsapp voice messages, i have tried with magisk and "android Mic Fix" but no improvement. Now i'm trying to modify mixer_paths_letv.xml, but i can't find the right value to change. Does anyone know how I can increase the volume of the microphone? there is another magisk module or xposed module? This is my modified xml, do you know what values to change for the microphone of calls and recordings?...
Click to expand...
Click to collapse
You should be posting these types of questions within the following Official LineageOS 14.1 thread for the LE Max 2:
Official LineageOS CM-14.1 (7.1.2) by cr3pt
I wish you the best of luck!
"Live Long and Prosper..."
~Ambassador S'chn T'gai Spock
Sent via Communicator [D2VZW] from the Bridge of the U.S.S. Enterprise

Develop Bugs

welcome

[Q] Raise headphone volume - help needed - G3 Q&A, Help & Troubleshooting

I would also appreciate someone looking into this. I am hearing impaired and think the volume for music is way too low with my high quality headphones on! For some reason in-call volume is fine.

I went to system/etc then snd_soc_msm_2x folder and edited that on my lg g pad I assume it will be the same

Related

[Q] Change camcorder maximum time limit - CM11

HELP NEEDED modifying Mixer_path.xml for in-call volume

[Q] Viper4android deactivates mic

Samsung Galaxy Tab Pro 10.1 (picassowifi) volume problem - mixer_paths.xml

Leeco Le Max 2 Lineage OS microphone very low

Categories

Resources