First person to help gets paid for your time...
Problem: I have a s3 i747 from att.
it has 4.3 stock.
I use srs to unlock all my phones.
well when I went to unlock this one it said it had new security.
Usually when this happens I odin this file that downgrades the modem.
well I did it and now I have null imei and unknown baseband
I tried restoring to stock, didn't help. Through kies and odin.
I need to put it back the way it was... can someone please help..... ill paypal you as soon as its working again...thanks
So you're currently at stock, unlocked? Does the phone boot at all?
These threads may help:
http://forum.xda-developers.com/showthread.php?t=2658486
http://forum.xda-developers.com/showthread.php?t=2722660
yes it is still stock 4.3. no its not unlocked. everything works and boots fine. just no signal because of null imei and unknown baseband.
I think I need to just flash a modem via odin....I just don't know which one
http://forum.xda-developers.com/showthread.php?t=1831898
There's seems to be a rash of this happening in the past month. You'll probably find that link helpful but first check and see if others found a better solution.
Yes. Flash the 4.3 modem.
As of 4.3, flashing any older modem will no longer work, resulting in an unknown imei and baseband version. Flashing back to the correct modem nearly always solves this issue.
It will be like this from now on btw. You cannot use any modem except the one which matches your current firmware build.
This means our free unlock method no longer works unfortunately. But you can get unlocked for just a few bucks using one of the many services online. I know some are on ebay, but google will find others as well.
I installed cwm and downloaded the modem but im lost from there.
do I rename it update.zip?
Nope, just flash like you would any other rom.
Because you asked about renaming it to update.zip though, I have to ask if you are certain you are in cwm? If you had previously updated via ota it may restore the stock recovery every time you reboot. If this is happening, reflash cwm in Odin, but uncheck auto reboot. Wait until it says PASS, then unplug and pull the battery.
Next put the battery back in and boot to recovery. (Volume up, home, power. Release power only after it vibrates)
If you are sure you are in cwm though, just flash the modem normally.
Yes im sure its cmw. when I open recovery and look for the zip its nowhere to be found. that's why I was asking if I should change the name.
I did try it by changing the name but the file still doesn't show up.
It's an IMEI problem. If you haven't made a backup of the IMEI folder you can't do anything.
Sent from my SM-G900H using XDA Free mobile app
daddydv said:
Yes im sure its cmw. when I open recovery and look for the zip its nowhere to be found. that's why I was asking if I should change the name.
I did try it by changing the name but the file still doesn't show up.
Click to expand...
Click to collapse
Make sure the sdcard is mounted. Have you tried getting to it on both internal and external cards?
Thin_Bezel said:
It's an IMEI problem. If you haven't made a backup of the IMEI folder you can't do anything.
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
Not true. 90% of unknown baseband and imei problems ive helped people with lately just needed the correct modem. And even if it were the imei, I can still help with that. Im convinced in this case its just the modem though.
Thanks doc... that was the problem...imei and baseband are back. donation has been sent....thanks again.
Hey thanks man! I do appreciate it, but I am just glad I could help! I will definitely put it to good use though! (Broke the lcd on my S3 a while back and haven't had the disposable funds to fix it. Something always comes up...lol!) Will be adding it to my savings for this purpose!
Anyway, since we were slightly on the IMEI topic, there is a backup you should do if you haven't already. (Root is required for this to work though.)
Its super simple and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
DocHoliday77 said:
Hey thanks man! I do appreciate it, but I am just glad I could help! I will definitely put it to good use though! (Broke the lcd on my S3 a while back and haven't had the disposable funds to fix it. Something always comes up...lol!) Will be adding it to my savings for this purpose!
Anyway, since we were slightly on the IMEI topic, there is a backup you should do if you haven't already. (Root is required for this to work though.)
Its super simple and will create an on device backup of your nv data. The backup will be stored on a couple of partitions we never touch, not even with firmware flashes. This essentially makes it a permanent backup. The cool thing about it is every time you reboot, the system checks for any corruption, and if detected, it will automatically restore from this backup. So if it were to ever happen, you probably wouldn't ever even notice it!
Install the Terminal Emulator from the play store. Open and enter this:
su
reboot nvbackup
Thats it! Device will reboot and create your backup. This should prevent you from ever suffering from a lost IMEI!
Click to expand...
Click to collapse
You can also use qpst to backup imei. Windows app. Free. Lots of walkthroughs around for those less comfortable with cli.
Nvm. 10char
azuziel said:
You can also use qpst to backup imei. Windows app. Free. Lots of walkthroughs around for those less comfortable with cli.
Click to expand...
Click to collapse
I know, I already have it and have used it and other tools to help fix at least 700-800 S3's, probably more! (No, i do not charge for my help either.) I dont tell about it or give it out unless its absolutely needed for a legitimate imei restore though. Too many people try to use it illegally and Im not willing to take the chance. Its the main reason most of the info has been deleted from everywhere. Only a few threads here and there get by the mods it seems.
Anyway, to my knowledge, no one who has run this backup has ever lost their IMEI. It even seems to help for those occasions after flashing a cm rom where the imei displays "unknown". (Apparently, at least on the T999, cm sometimes has problems reading the nv data. If rebooting several times doesnt solve, stock firmware does).
At this point I believe if you run this backup, you will have no need for a .qcn or .txt file backup, which is why I just dont mention it anymore. And if it does happen, people can pm me and ill be happy to help fix it.
Because of how I understand this backup to function, I do believe if it had been run during first boot, we would've never seen so many imei problems to begin with! I just dont understand why Samsung refuses to do this!
Anyway, that's why I dont mention those tools anymore. If you have any questions about any of it, please feel free to PM me and ill try to explain better.
Related
Okay, I have spent hours upon hours searching the subject and it becomes a bit hard to find a correct procedure as there are tons of hearsay and perhaps singular examples because no one really seems to fully grasp the concept of the issue. So I guess different fixes work for different people.
But here is my issue:
I have a Wind T889V. Was working fine, done lots of ROM ranges, big geek, ETC.
Well, I made a mistake and I flashed T889UVBMD1 Radio. For whatever reason I flashed it since thanks to so many ROMs flashed I forgot that I have a T889V and not a T889.
So that killed my radio. No 3G, no data, IMEI and Baseband, Mobile Network type say "unknown." I tried flashing proper radio immediately after and my phone WOULD bootup but then would reboot about 3-5 minutes into it. The reboot cycle was so short it would hardly let me do anything with it.
Then I read that booting up to an early version of stock might bring IMEI info back. Did not work. In fact, my phone boots up minutes after being being turn on unless I flash the T889UVBMD1 Radio. So I think I am stuck with it. T889V radios I have tried boots the phone up sometimes and sometimes it does not, or it cycles right at the Samsung screen.
Yes, I did a EFS backup when I first rooted. However the process only g=created a IMG file which I kept safe. Which is 20 megs in size. However, when I try to open it with a 7.Zip to look inside it appears to be empty!! I have done a restore multiple times and nothing happens. Even though the process seems to go without errors.
I check the EFS folder on my phone as it is still in there. However I do not see any .bin files. And under IMEI, there is only one file:
mps_cod.dat which when open only has the words GLW in it. That is it. So needless to say, that is not the way it should be.
I have tried to install T889VVLALJ4 (which is the original ROM through CWM) and it soft loops, even though members have said that it has magically saved their phone it sounds to me like perhaps in those cases the EFS folder still had the data and the flashing of the rom simply just rediscovered the info.
I have been reading about a member who was able to inject the IMEI info the folder but I have not been able to get in touch with him or find the exact procedure how it was done.
My last resort would be to try to restore to original, soft looping and all and take it back to the service provider see what they say.
Thoughts? And Thank you.
Try restoring via kies.
http://forum.xda-developers.com/showthread.php?p=46164552
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
Try restoring via kies.
http://forum.xda-developers.com/showthread.php?p=46164552
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Okay.
For those in the same issue as me, the problem with trying to solve it KIES is that it will look to see if your phone is factory everything. If you are like me, and you go the FACTORY ROM/RESET route then your phone will reboot every 30 seconds to every 2 minutes. So KIES will never have time to recognize your phone, assuming that your phone boots at all.
Then if you go back to the issue I had... which was to put the T889 Modem which stops your phone from rooting, then KIES will tell you the phone is not suitable for an update. So there goes your option.
The best way for the time being is to use the AWS QCN (Google this) route. Which enables the AWS on your phone and allows you to at least to connect to your provider. As of this writing and three days of doing work, I have found a fix, that sort of fixes the phone. I have tested with a few people and they hear some background noise on Wind. So it is not a full fix, but it is a round about way to have your phone sort of back.
The biggest issue I have found after doing in-depth search on this issue and most so-called fixes is that most users have no bloody clue what the issue is so for some it is easier to fix than for others and as such you get a lot of false negative fixes.
The fact is I have found so far is that there is no 100% that I have found.
You first need to know if the issue is with the Modem, your IMEI getting fudged, your EFS folder messing up and whether once it got fudged whether your EFS info still remains on your phone. Different fixes fix different issues.
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?
Hi folks, long time reader, first time noob answer seeker.
I'm no stranger to rooting, flashing, hacking about and such - I even spend most of my day as a software engineer, and I've finally given up on this one - so here I am (rock me like a hurricane), please be kind.
SM-900T - It was rocking pretty darn well on Jedi Elite which I had flashed over rooted stock 4.3 MI7 - then (probably after one too many XPosed modules) it just kept rebooting randomly. Thinking it was no biggie, I thought I could just reflash to stock and call it a day. Thirteen or so flashes later, I gave up on 4.3 and figured I'd just take the thing up to 4.4.2 NB4 by upgrading everything to 4.4.2 via Kies.
That's when I first ran into the bootloop issue, read a lot about it, and managed to get it up(ish) on stock, rooted, with Philz 6.X... Couldn't flash a ROM to save myself and wound up with another soft brick.
Flash forward to Friday - decided to start from scratch again - attempted to flash stock 4.4.2 from Kies, from Odin, From Heimdall... Nothing seems to be able to get me out of the current state it's in:
Only boots to download mode. Flashes seem to work fine, but on that first reboot where it tries to go to stock recovery to finish up on the device itself, it never gets there - boot loops trying to load recovery no matter how it wants to get there. If I pull the battery and start up (either straight to system or by cancelling out of download mode), it boot loops trying to load system. Boots fine to download mode, where I attempt to flash again with the same results.
Yes, I've tried Odin 3.0.9, 3.0.7, 1.8.5, Heimdall on Mac, Heimdall on Windows, Kies on Mac, Kies on Windows - repartition via PIT and not. Installed, uninstalled, and reinstalled all software and drivers multiple times, tried multiple cables on multiple USB ports.... Most of the time it looks like it's going to be fine (sometimes the flash fails, usually through Kies), but never surivives that first reboot after the flash.
Every answer I've seen says to do the things I've already done or cannot do (flash stock via Odin, pull the battery and boot to stock recovery and do a factory reset - which I'd LOVE to do, but can't). No problem recognizing the sucker on the PC/Mac
Next step: try flashing a N9005 ROM...
Any other thoughts? I do have another N900T that's working but has a blacklisted IMEI, and I've been tempted to swap the IMEIs a last resort (although either I'm too dumb to make it stick, EFS pro says it succeeds in writing the IMEI after I do a EFS format, but it doesn't stick.... Either I'm missing something, or I need a UART cable) - is there a way of swapping just the radio hardware or just the internal storage? OR, is there a way of taking a full system image of my working phone and making an Odin-flashable tar from that?
Failing any of these options, perhaps I'll wait for an Odin-flashable 4.4.3 if such a thing exists - or, hope to get lucky and swap it out at a store praying they don't see I've tripped Knox.
Looks like you've tried almost everything. Take it in and have them swap it.
Sent from my SM-G900T using Tapatalk
Coming from you...
noobtoob said:
Looks like you've tried almost everything. Take it in and have them swap it.
Click to expand...
Click to collapse
Coming from you (I have read, and am quite thankful for, many of your posts), sounds like that might be the best option, however disconcerting.
bondidave said:
Coming from you (I have read, and am quite thankful for, many of your posts), sounds like that might be the best option, however disconcerting.
Click to expand...
Click to collapse
Well, I do have a few ideas... Got done questions though.
1. Do you have an external SD card?
2. It goes all the way through flash on 4.4 even with heimdall?
3. Is there anything you have left out? Even the smallest detail can help, and by the op you are detail oriented, so I just need to know.
Sent from my SM-G900T using Tapatalk
... is there a way of taking a full system image of my working phone and making an Odin-flashable tar from that?
Click to expand...
Click to collapse
Yes, but I don't have the details handy.
All your attempts suggest to me that you might have some damaged hardware which is causing data corruption during transfer. Open the back and take a good look at the USB port. Tighten the screws and try a transfer while firmly holding the cable in place -- don't move it while transferring.
If that doesn't work then let 'noobtoob' walk you through booting with the removable sdcard. Your second N900T will be needed to write the data to the sdcard. If this works then you can 'dd' write stock partitions to an sd card with #2 then 'dd' write them in #1.
If either of those works then unroot and take it in for warrenty exchange.
Frank
bondidave said:
... then (probably after one too many XPosed modules) it just kept rebooting randomly.
Click to expand...
Click to collapse
This also indicates data corruption, and this is what started it all. Since you have tried various cables and computers that leaves the device, probably the USB port.
Frank
probably the USB port.
Click to expand...
Click to collapse
Swapped the main board with the working phone to rule out the USB port - still no luck.
Definitely interested in trying the boot from external SD, I'll do my own search for it, unless you can quickly provide me with a link - but if it's as easy as it sounds (booting off of an SD in order to be able to send ADB commands to dd copy the partitions from the good phone to SD then from the booted SD back to internal) - I'm happy to give it a shot.
Tempted just to swing by TMO just to see if they'll swap it "under warranty" (despite picking it up from a private sale) - the only way they would notice it's been "tampered" with would be to check the knox counter by attempting to run download mode.
Oh, and yes, it does go all the way through with the flash (at least in Odin - I haven't tried a full flash through heimdall, just boot and recovery, Kies occasionally goes through to the end, but sometimes craps out at the same 57% point at which point the emergency restore screen shows up)
Thanks again guys
bondidave said:
Swapped the main board with the working phone to rule out the USB port - still no luck.
Click to expand...
Click to collapse
OK, but I still think the problem was initially caused by corruption. Maybe the files you have been flashing are corrupt.
Definitely interested in trying the boot from external SD, I'll do my own search for it, unless you can quickly provide me with a link - but if it's as easy as it sounds (booting off of an SD in order to be able to send ADB commands to dd copy the partitions from the good phone to SD then from the booted SD back to internal) - I'm happy to give it a shot.
Click to expand...
Click to collapse
This is the thread, it would be good to read the whole thing but if you need to save time begin at this message: http://forum.xda-developers.com/showpost.php?p=48685247&postcount=158
I have not tried this procedure yet but @noobtoob was actively involved in it.
Tempted just to swing by TMO just to see if they'll swap it "under warranty" (despite picking it up from a private sale) - the only way they would notice it's been "tampered" with would be to check the knox counter by attempting to run download mode.
Click to expand...
Click to collapse
Please try the SD-boot first so that we can add that experience to this newly developed procedure.
Oh, and yes, it does go all the way through with the flash (at least in Odin - I haven't tried a full flash through heimdall, just boot and recovery, Kies occasionally goes through to the end, but sometimes craps out at the same 57% point at which point the emergency restore screen shows up)
Click to expand...
Click to collapse
You have probably tried it, but if not, download fresh copies of everything and check the MD5 values.
Frank
Frank Westlake said:
OK, but I still think the problem was initially caused by corruption. Maybe the files you have been flashing are corrupt.
This is the thread, it would be good to read the whole thing but if you need to save time begin at this message: http://forum.xda-developers.com/showpost.php?p=48685247&postcount=158
I have not tried this procedure yet but @noobtoob was actively involved in it.
Please try the SD-boot first so that we can add that experience to this newly developed procedure.
You have probably tried it, but if not, download fresh copies of everything and check the MD5 values.
Frank
Click to expand...
Click to collapse
This was for hard brick method and no one has verified it works on 4.4 KK yet. There is an image in there though. My mediafire shows it was downloaded 11 times, but yet not a single "this works on KitKat" response. Located here you will find the kkunbrick.img. There is still a problem flashing anything through heimdall after updating to the 4.4 bootloader, so there is no way to tell if the phone actually took the recovery. I have had to switch to Odin for everything afterwards, and in personal experience 3.07 works best with my phone.
@bondidave I was thinking skipping the sd-card trick for now, and trying just a few other things first. Do you have a nandroid of any 4.4 ROMS saved anywhere? I was going to say try and flash the stock image. After it gets through flash and tries to boot into recovery, go back directly to download mode. Flash philz or twrp, whatever you need to. Try and perform a recovery boot, wipe everything, and nandroid restore of a 4.4 if you have one.
Also if you have an external find the efs fix zip and have handy on an sd-card, do the same steps above except the nandroid restore. Basically if we can get into a recovery we should be ok. I had a similar issue when it was just booting over and over into download mode and this was how I fixed it. I have never used the efs fix zip, but many others swear by it. I was able to recover fortunately enough.
Last resort try the sd-card boot. I don't necessarily think it will work with this particular case as you do not have the dreaded QHUSB_MODE and your phone is still recognized by the computer(s) you have been using.
As far as making a complete system backup of your current phone, I highly recommend against it, unless you just want to extract information from it and not re-write it. This could definitely cause some system corruption on a new device.
If none of these methods work, then try and have them swap it under warranty.
Frank Westlake said:
You have probably tried it, but if not, download fresh copies of everything and check the MD5 values
Click to expand...
Click to collapse
Yessirreeebobbyjimmy, tried several copies from several different places - that and Kies is a moron and redownloads it every time anyways.
noobtoob said:
My mediafire shows it was downloaded 11 times, but yet not a single "this works on KitKat" response.
Click to expand...
Click to collapse
I download these things just to have them handy if something fails.
Do you have a nandroid of any 4.4 ROMS saved anywhere? I was going to say try and flash the stock image. After it gets through flash and tries to boot into recovery, go back directly to download mode. Flash philz or twrp, whatever you need to. Try and perform a recovery boot, wipe everything, and nandroid restore of a 4.4 if you have one.
Click to expand...
Click to collapse
I don't think he got that far into installing 4.4, but I recommend not using anything that was saved after this problem began. If the problem was caused by corruption then the restore will reinstall the corruption.
Last resort try the sd-card boot. I don't necessarily think it will work with this particular case as you do not have the dreaded QHUSB_MODE and your phone is still recognized by the computer(s) you have been using.
Click to expand...
Click to collapse
If the problem is bad USB or other bad hardware causing corruption during transfer then the SD-card boot will get past that, then transferring the rest of the partitions by SD-card will continue to be corruption-free. He could then trade-in the phone.
But you are right -- he should try everything else before the SD-card boot. Because if something else succeeds then maybe the hardware is fine, and if he went immediately to SD-card boot he wouldn't know that.
Frank
Thanks for the advice guys - I'm going to try the backup from my other phone, then the efs fix, then the sd-card boot... I'll report back, wish me luck.
A nandroid previous failure, or a ROM install from external SD card was all I meant.
Sent from my SM-G900T using Tapatalk
I got some answers I was looking for here. Glad I read this thread.
Lorettaa said:
I got some answers I was looking for here. Glad I read this thread.
Click to expand...
Click to collapse
Glad something good came out of my frustration!
Here's a quick update: I've done everything but the boot from SD card with no luck (and actually thought I had hard(er?) bricked it for a while after trying to copy over a few images from the other phone - turns out it needed to stay with the battery out for at least 20 minutes).
Good news - walked into a TMO brick-and-mortar last night, showed the guy my endless bootloop, and a replacement is on its way to my house for an affordable $20 warranty service fee.
At this point, I'm thinking the internal flash memory is just bad - as a software engineer, I'm ok with chalking this one up to a hardware issue (as much as I was hoping that my first post on XDA would result in some new profound solution to a longstanding issue common to a few folks).
Oh well - new Note 3 on it's way, and a new S5 shortly behind it (didn't hold out much hope on TMO hooking me up, so I ordered an S5)... let the battle of the Samsungs begin!
Thanks again to you guys who helped out - and the whole XDA community in general, I am very grateful.
Finally you made it fix and enjoy the battle between your phones
Well, sucks it couldn't be fixed, but glad you got a replacement on the way. It pretty much sounded like the partitions were well over written before we attempted anything, but always worth a shot.
Sent from my SM-G900T using Tapatalk
Yes, but I don't have the details handy.
All your attempts suggest to me that you might have some damaged hardware which is causing data corruption during transfer. Open the back and take a good look at the USB port. Tighten the screws and try a transfer while firmly holding the cable in place -- don't move it while transferring. :good:
Hi, Yes you're probably right I shouldn't have messed around without knowing exactly what I'm doing, but any help would be greatly appreciated, I have tried to search for answers on here, but the forum is running so slowly for me at the moment that searches just time out for me.
Anyway, heres what I did - I rooted via ODIN, (CF-Root) and installed CM12.1 - First though, having read about the EFS risks I thought I was covering my ass by downloading EFS Backup from the Play Store - I then backed up my EFS Partition, there were three options, and I assumed the safest option was to leave as default (tar.gz)
So when I saw I'd lost my IMEI after flashing CM, I reinstalled the app, tried to restore - which directed me to an app "Partition back up", which turned its nose up at my tar.gz files! (thanks for that EFS Back up!)
Can anyone tell me what I need to do with the tar.gz files? and do I need all of them?
Thanks in advance.
Partition backup?
Just use the restore options in EFS PRO. What's inside the archive, images or files?
I've just got a file of tar.gz's Radio, CDMA Radio, EFS, and three named M9kefs1 ,2, & 3
I copied them onto my Mac and managed to open them, which gave me .img files too, Which I've tried restoring on the tablet (using Partitions backup app) It reported success but didn't work.
I'll try this EFS Pro, I had seen it mentioned wasn't sure if thats the way to go, thanks!
I've got to ask, why through all of this you didn't use the one tool that would have solved your problem in minutes. TWRP?
ashyx said:
I've got to ask, why through all of this you didn't use the one tool that would have solved your problem in minutes. TWRP?
Click to expand...
Click to collapse
To back up EFS you mean? Quite simply I didn't think I needed to, I thought I'd done it with the EFS Back up app
zoidster said:
To back up EFS you mean? Quite simply I didn't think I needed to, I thought I'd done it with the EFS Back up app
Click to expand...
Click to collapse
There's nothing better than making a full backup in recovery.
It's your one and all get out clause if your device ever doesn't boot or something goes wrong.
Backup apps rely on a Bootable system.
In fact I would suggest you do it before going any further.
I suppose I wasn't too bothered, as coming from an "empty" tablet with no data loss to worry about, I had in my mind that if all went tits up I could simply flash the stock firmware with Odin. (Which I've now done anyway as EFS Pro wouldn't play ball)
Thanks for you help! Lesson learned on Backups.
zoidster said:
I suppose I wasn't too bothered, as coming from an "empty" tablet with no data loss to worry about, I had in my mind that if all went tits up I could simply flash the stock firmware with Odin. (Which I've now done anyway as EFS Pro wouldn't play ball)
Thanks for you help! Lesson learned on Backups.
Click to expand...
Click to collapse
Stock Firmware does not flash the EFS partition.
If it gets wiped or corrupted it's gone and not recoverable.
You have been lucky.
Well flashing the stock firmware back cured the problem, Must be a CM12.1 issue. That would explain why restoring the EFS .imgs didn't work either then.
Hi, I have a similiar issue with my SM-T705. I have the stock rom installed. My IMEI number seems to be broken. It's a generic imei 00499 number. However, I still have my box laying around which it came in. Is there any way to restore it from that?
haimann95 said:
Hi, I have a similiar issue with my SM-T705. I have the stock rom installed. My IMEI number seems to be broken. It's a generic imei 00499 number. However, I still have my box laying around which it came in. Is there any way to restore it from that?
Click to expand...
Click to collapse
Have you been able to resolve it? I am in the same boat as you
einsteino said:
Have you been able to resolve it? I am in the same boat as you
Click to expand...
Click to collapse
There are dozens of us, DOZENS! Seriously though, if you get a method please share.
Hey guys, been reading through the threads and not really finding a clear answer or solution to this problem. This is a completely stock sprint sph-l710. I started getting this box with yellow lettering overshadowing the primary display of which I've learned indicates the phone is in 'factory mode'. I thought performing a factory reset would fix this but it did not. I noticed when you boot the phone in recovery mode I see the efs error. I am thinking the underlying issue is with fixing the efs problem. Now that I have reset the phone I no longer have data network access, im guessing because of this factory mode. I am new to this and not real understanding of the lingo everyone uses. From what I've read Im worried im going down a rabbit hole if i start tinkering. I am looking for clear instructions to repair what I think is corrupted software (I'm guessing the operating system software). The instructions I've seen seem to skip steps that are probably rudimentary to everyone else but leaves me without a starting place. I have downloaded oden but i am not certain again without precise instructions that I am not going to permanently mess up my phone.. there appear to be a number of variations of this device and i want to make sure the instructions I get will work on mine. I will take any advise on getting this resolved. I am not opposed to rooting the phone either if that fixes the problem (no idea how to do this, never tried, but some threads on here I think I can follow to do it safely). With that said, different threads also seem to indicate (emphasize 'seem to') that team win recovery can fix this but there are no clear responses regarding my issue of a solid fix. Thank you for any help
timbow4 said:
Hey guys, been reading through the threads and not really finding a clear answer or solution to this problem. This is a completely stock sprint sph-l710. I started getting this box with yellow lettering overshadowing the primary display of which I've learned indicates the phone is in 'factory mode'. I thought performing a factory reset would fix this but it did not. I noticed when you boot the phone in recovery mode I see the efs error. I am thinking the underlying issue is with fixing the efs problem. Now that I have reset the phone I no longer have data network access, im guessing because of this factory mode. I am new to this and not real understanding of the lingo everyone uses. From what I've read Im worried im going down a rabbit hole if i start tinkering. I am looking for clear instructions to repair what I think is corrupted software (I'm guessing the operating system software). The instructions I've seen seem to skip steps that are probably rudimentary to everyone else but leaves me without a starting place. I have downloaded oden but i am not certain again without precise instructions that I am not going to permanently mess up my phone.. there appear to be a number of variations of this device and i want to make sure the instructions I get will work on mine. I will take any advise on getting this resolved. I am not opposed to rooting the phone either if that fixes the problem (no idea how to do this, never tried, but some threads on here I think I can follow to do it safely). With that said, different threads also seem to indicate (emphasize 'seem to') that team win recovery can fix this but there are no clear responses regarding my issue of a solid fix. Thank you for any help
Click to expand...
Click to collapse
Odin will flash the factory firmware for you. Get firmware from sammobile. Look for sph L710 device, and firmware with NJ2 in the name. Put phone in download mode, (power off then hold power+home+volume down) plug in phone to pc. Wait till Odin says added. Click AP in odin, select firmware you downloaded, click start. When it's done, unplug phone, remove battery, put it back in and reboot.
This may not fix your efs partition, but it's the first thing to try.
Odin
I found the thread for nj2 firmware here
issue still persists
Hey Madbat, thank you so much for reaching out to me and giving me the advise. Installing the firmware through odin was really easy. Thank you for that! However, it did not fix the issue. When the phone came back up it still has the exact same problem. I am going to attach a couple pictures to show you what i am seeing... Really appreciate your time and help!
hell, sorry it says im a new user and wont let me post the pictures...
timbow4 said:
Hey Madbat, thank you so much for reaching out to me and giving me the advise. Installing the firmware through odin was really easy. Thank you for that! However, it did not fix the issue. When the phone came back up it still has the exact same problem. I am going to attach a couple pictures to show you what i am seeing... Really appreciate your time and help!
hell, sorry it says im a new user and wont let me post the pictures...
Click to expand...
Click to collapse
Sorry, I never had that issue. Maybe someone else will chime in with experience on the efs partition. That's not a triband s3 is it? (Sph l710t?) T at the end means triband. Second thought, I don't think the firmware would have flashed if it was triband.
How did you wipe your efs?
Its not a tri band. Just SPH-L710. Wish this forum would let me post the pictures of what my phone is doing.. Since the firmware doesnt correct the issue I would think then its a problem with the operating system itself. I have been scouring the web and have found various threads specifically about efs repairs but they entail doing things that seem awful complicated. And i dont know if those things work on my model phone. Maybe rooting the phone gets deep enough to over write or repair the issue. Is there not a way to restore the operating system itself maybe or is that what a replacement ROM does? I am thinking of trying my hand at rooting the phone and seeing what happens. One thread indicated TWRP would backup and restore the EFS file. Im thinking if it backs up a corrupt efs file what good is that, maybe it fixes it too. Found an excellent video on XDA for rooting the S3. Hopefully it or I dont make it worse. Love to get this one fixed but i guess the reality is the phone is old. Thank you for the input
timbow4 said:
Its not a tri band. Just SPH-L710. Wish this forum would let me post the pictures of what my phone is doing.. Since the firmware doesnt correct the issue I would think then its a problem with the operating system itself. I have been scouring the web and have found various threads specifically about efs repairs but they entail doing things that seem awful complicated. And i dont know if those things work on my model phone. Maybe rooting the phone gets deep enough to over write or repair the issue. Is there not a way to restore the operating system itself maybe or is that what a replacement ROM does? I am thinking of trying my hand at rooting the phone and seeing what happens. One thread indicated TWRP would backup and restore the EFS file. Im thinking if it backs up a corrupt efs file what good is that, maybe it fixes it too. Found an excellent video on XDA for rooting the S3. Hopefully it or I dont make it worse. Love to get this one fixed but i guess the reality is the phone is old. Thank you for the input
Click to expand...
Click to collapse
Backing up and restoring it won't help. You already installed a new operating system ( that's what the firmware is).the efs is part of your radios. If I remember correctly it contains your imei and other important things specific to your phone.
You may be out of luck there dude. Don't know how you wiped your efs.
Rooting this phone is simple. Just flash TWRP with Odin. Download the Twrp image from their site. Same as flashing the firmware, only you select recovery instead of AP in odin and select the Twrp image.tar instead of the firmware tar.
https://dl.twrp.me/d2spr/
Use the top on the page. (Newest)
And then use twrp to flash either SuperSU, or Magisk.
Done.
Flashing a custom rom will not fix your issue. You need a working efs. Flashing any operating system will not fix it (you already flashed the whole operating system).
Twrp can restore an efs, but only if you have a working one to backup first. You were right about backing up yours now and restoring will do nothing.
Has it ever been activated?
Prior to this, every once in awhile when i changed a battery out and turned the phone on it would have a pop-up screen tell me something was bad and the phone needed to be reset (something along those lines) and i always just turned the phone back off and on and it booted up fine each time. That may have been an indicator that something, file or system file maybe was corrupted. Then a few week ago when it booted up it started doing this whole thing. Prior to me factory restoring the phone here recently it was completely functional but since the restoration it will no longer connect me to the network. If you goto settings and click on some system features it will turn the network on for that specific function (temporarily) but does not give me any other access. It tells me that the network works but it being blocked (maybe because of the factory mode issue). The wifi works and i can make and receive calls. Still manageable but very annoying. Im going to try your instructions with installing TWRP. If i am successful then maybe i can also get into the system files and possibly restore the broken one.. Thanks again
update
So I have successfully rooted the phone by intstalling TWRP ver 3.2.1 and using TWRP to flash SuperSU ver 2.82. I also installed root explorer to get access to system files. I gained access to the EFS folder and it is empty. So now I'm not understanding if the folder is completely empty how does the phone still work at all? More research led me to a XDA developer that put together a program called EFS Professional which is supposed to backup and restore efs or imei data. Really slick program, basically takes the complication out of locating and backing up the EFS information yourself. (I would include a link but I still cant..) It includes an ADB shell and the ability to make some changes to the phone including directly turning off factory mode . It also had me install an application called BusyBox Pro which is also a very handy tool for getting access to system files. What I don't understand is that the EFS Professional program seems to locate the efs information on my phone and backups it up and then restores it from said backup however when I look at the efs folder its empty. Perhaps not all the efs information is located in the efs folder. And of course since that folder is empty the function of turning factory mode off fails because it cant find the files. I have found a few threads that has very simple instructions once you have super user access you can go right into the efs folder to factory mode and simply turn it off. Mine is empty.. So again the problem continues. Possibly with access to the ADB shell and more help from folks on here I can figure out a way to restore my efs information. I don't know if the efs information can be used from a another same model phone, I'm guessing not if it has a specific imei identification. Im working hard on this but still unsolved. I know way more at this point then I did but I think I still know just enough to be dangerous. Thankfully my phone is still functional at this point..