Develop Bugs

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |

|Guide|How-To| Root & Install Custom Recovery for 4.3 / 4.4 Update |16 July 2014 |
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here.
If you have not updated to 4.4, go here.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Edit:
Here is some potentially useful info for root method #1 from ansonantonym.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery then flash SuperSu and the Knox Remover
4) Reboot
5) Download SuperSu from the Play Store
6) Open SuperSu and update the binary when prompted
7) Reboot
8) Enjoy rooted 4.3/4/4
Downloads:
Odin
TWRP (Odin flashable tar)
SuperSu (v1.65)
SuperSu (v2.01)
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
Please be sure to thank Chainfire, Dees_Troy, and Kaito95.
*****

Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

jeremyds45 said:
Noob here, first off I unrooted a while ago, then took the ota 4.3, is the bootloader locked? Cause according to the cf auto root site if your bootloader is locked you'll probably brick your phone if you flash the auto root? Also do these steps have to be in order? I tried rooting by other means and installing supersu first, wouldn't work so I removed knox with the script, and then updated supersu in the play store and still nothing, can I try to flash cf auto root now and then update supersu in the play store? Thanks a million, need this thing rooted
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.

upndwn4par said:
Well, I'm not bricked, so I think that answers your question about the bootloader.
Do you have a custom recovery installed? I assume so since you say you flashed the Knox remover script. If you do have a custom recovery installed, just flash the SuperSu zip, then update in the Play Store.
Click to expand...
Click to collapse
Ah it is so nice to have root again... Thank you so much for putting up with a noob.
Crazy events of a noob that lead me to root
Installed ota 4.3
Tried to root and install superuser by odin and then custom recovery to flash
Root didn't happen because of knox
Could only get to CWM custom recovery if it was right after odin and battery pull?...
Flashed the script to remove knox, which did remove knox
Tried the same root method as above and no root access
Tried supersu and then updating in play with no success
Changed security update settings etc nothing
Reset delvik, cache, permissions, etc nothing
Different root method and files for odin, and custom recovery stuck
Used files from this thread, went into custom recovery and flashed supersu
Installed supersu from play store...
Updated the binary using custom recovery
Rebooted...
ROOT access, all root applications work fine and root sticks even after reboots
I never messed with cf auto root method
THANK you guys for your time effort and sharing, helps noobs out like me a lot!

Sweet! I've missed root since I upgraded using the OTA file you provided. Looking forward to much other great things coming from you

Thank You
upndwn4par said:
Warning: Following any of these instructions will void your warranty, and could possibly cause irreparable harm to your device (i.e. bricked). If you do not understand these risks, stop here and do not proceed. If you do not know how to use Odin, stop here and do not proceed. I am not responsible for anything that happens to your device. YOU chose to follow this guide.
If you have not updated to 4.3, go here. Make sure you understand the risks and uncertainties described in the OP.
Finally, there is no guarantee that either method will work for you.
Root Method #1:
The first thing you should try is CF-Autoroot since this has worked for many users.
If you successfully root with this method, you can simply install Goo Manager or ROM Manager and install recovery.
This method failed for me after many attempts.
Root Method #2:
1) Reboot in to download mode
2) Flash TWRP with Odin via PDA
3) Reboot to recovery and flash SuperSu.
4) Flash the Knox Remover
5) Reboot
6) Download SuperSu from the Play Store
7) Update the binary when prompted
8) Reboot
8) Enjoy 4.3
Downloads:
Odin
TWRP (Odin flashable tar)
UpdateSuperSu
If you found another method that worked for you, please post here so that others may benefit.
If you are uncertain about any of the steps above, please ask your questions here before proceeding.
*****
Click to expand...
Click to collapse
Method two absolutely worked. Thank you so much. I was scared to flash TWRP but knowing you did it gave me the courage. Have full root and happy

questions about this root
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.

THANKS!!!! your a lifesaver didn't know how much longer i could take without root

Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??

bkong said:
Dunno where you guys got your 4.3 update from and how you got it working but I did the OTA and Root just does not want to stick. I used knox remover and Cf auto root but it loses root after a restart. SuperSu never opens and crashes as soon as you open it. I have a feeling Cf auto root is just not compatible for the ota 4.3 i747??
Click to expand...
Click to collapse
use the TWRP method worked perfected for me

Thanks

PimpMyPC said:
Hi, I'm a little nervous with this root but I need the root as the phone is useless without it.
I have the [email protected] galaxy s3 I747 will all these files work with it im just double checking.
Also do you flash the knox remover the same way as you flash other things with the pda button?
Will I still be able to do factory restores?
Also I saw that knox remover removes a lot of apps, Can you install these deleted apps from the market if you need too?
THanks please let me know asap.
Click to expand...
Click to collapse
The second method worked great. I believe (and the way that worked for me) that you use your custom recovery to flash the knox script, not using Odin and pda. I don't think it removed anything other than knox, there is a different script for removing knox and att bloatware. Should still be able to factory reset... But can't guarantee that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Root & Knox
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????

tailgunner9 said:
When you go to Settings/More tab/Security/Device Administrators, You have KNOX and Android Device Manage. Both are unchecked on mine. So does that mean Knox is not working if unchecked and safe to try to Root?????
Click to expand...
Click to collapse
Those settings are just for granting device administrator privileges. If unchecked, Knox is still doing it's thing, just not at an administrative level.
Yes, it is safe to try and root.
I have Android Device Manager as admin. That way if I ever lose my device I can just log in to the Play Store and locate and / or wipe the device.

To do this just flash the recovery.img file using odin and clicking the pda button correct?

Is there a way to freeze Knox instead of deleting it in the event I would want to go back to full stock?

After you are rooted, use an app like Titanium Backup(pro) or My Backup pro. Both will freeze it.

Root
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks

tailgunner9 said:
If some of you out there use Root Method #2 and it works well and No problems, Please post and let us all know. Thanks
Click to expand...
Click to collapse
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.

indymx said:
I tried method 1 and failed.
Then tried method 2, but using a CMW tar that was posted yesterday.
I seem to be rooted!
So far no issues.. Just need to get everything setup as I had it in the leak.
Click to expand...
Click to collapse
Thanks indymx, may get the nerve up to try it on my AT&T S3. Let me know if you run into any problems. Guess Rom Manager and other programs that require Root are working Ok and you have rebooted few times to be sure it keeps Root?? Have Happy Thanksgiving.

How to root a Samsung Galaxy S3 4.3 (SGH-I747)?

Hello everyone, so AT&T updated my phone and foxfi used to work just fine for hotspot but since Android 4.3 I can't so I need to root. I've seen a few threads in this site on some roots but don't get much info about them. How can I root my GS3 running 4.3? I've never rooted in my life so I'm making sure I do this right the first time . If anyone can please help me get the proper root for my GS3. I'm not wanting all these custom roms and stuff. I just want to be able to have free wifi hotspot and also a way to remove all that crap Bloatware.
Someone I'm another thread asked but I think it's for the Verizon version only? Link: http://forum.xda-developers.com/showthread.php?t=2565758
I just need some help finding a way to root. Thanks for reading!

Questions and Help issues go in Q&A and Help section
Thread moved
Thanks
FNSM

kennyglass123 said:
Questions and Help issues go in Q&A and Help section
Thread moved
Thanks
FNSM
Click to expand...
Click to collapse
My bad, using my phone to post this and got the wrong section. Thanks for moving it.

Same problem
Gotnitro said:
Hello everyone, so AT&T updated my phone and foxfi used to work just fine for hotspot but since Android 4.3 I can't so I need to root. I've seen a few threads in this site on some roots but don't get much info about them. How can I root my GS3 running 4.3? I've never rooted in my life so I'm making sure I do this right the first time . If anyone can please help me get the proper root for my GS3. I'm not wanting all these custom roms and stuff. I just want to be able to have free wifi hotspot and also a way to remove all that crap Bloatware.
Someone I'm another thread asked but I think it's for the Verizon version only? Link: http://forum.xda-developers.com/showthread.php?t=2565758
I just need some help finding a way to root. Thanks for reading!
Click to expand...
Click to collapse
- Has Anyone had an update to this yet? I am having the exact same issue where several things no longer allow me the permissions I once had. At&t sent out an update that kept popping up on my screen every five minutes for like 2 days so I Finally upgraded and I do not like the new version.
- I am especially ticked that they removed the option to hide Applications now. I use my phone for work and don't need clients and coworkers having easy access to personal apps and data since I collaborate on my phone quite a bit in meetings, plane rides etc.where my phone is passed around. So any new app I try to add also requires root access to do the trick and combined with not being able to use pdanet+ or foxfi to tether I have a big need to root now. I tried to root using GalaxyS3RootATT.zip - which did work on an earlier version of 4.2 but only ended up wiping my phone after the 4.3 update (i think this was the 2nd update for the same OS version 4.3) but it did install super user. However root test fail to show that it is properly rooted. Very Frustating and VERY nervous about Bricking my phone so I want to make sure its done right. Ive only rooted a handful of times every couple of years when I get a new phone and the process seems to change constantly due to so many codes and manufacturers and models and carriers etc.
Anyway please help ASAP. Thanks

http://forum.xda-developers.com/showthread.php?t=1963790
The instructions here worked like a charm after I upgraded to 4.3. Rest assured, CF auto root is compatible with the latest firmware. Just be very careful and follow the instructions meticulously.

First time rooter
Sorry if i don't understand whats going on this is the first time rooting for me.
I am trying to root my phone to be able to run 4.4 on it and have followed the steps to root it using odin3 and CF-Auto-Root but once i get back to my home page and try to use superSU I get an error message stating "Unfortunately, SuperSU has stopped." along with "Security information An application attempted to access system on your device without authorization. This attempt has been blocked".
Sorry if this is an easy fix or i left out important information but i would just like some help getting off the gound

woerner said:
Sorry if i don't understand whats going on this is the first time rooting for me.
I am trying to root my phone to be able to run 4.4 on it and have followed the steps to root it using odin3 and CF-Auto-Root but once i get back to my home page and try to use superSU I get an error message stating "Unfortunately, SuperSU has stopped." along with "Security information An application attempted to access system on your device without authorization. This attempt has been blocked".
Sorry if this is an easy fix or i left out important information but i would just like some help getting off the gound
Click to expand...
Click to collapse
You need to install a custom recovery in order to flash a custom ROM. You don't necessarily need root to load a custom ROM. Are you running a stock 4.3 ROM?

audit13 said:
You need to install a custom recovery in order to flash a custom ROM. You don't necessarily need root to load a custom ROM. Are you running a stock 4.3 ROM?
Click to expand...
Click to collapse
Right now it should be just stock 4.3 straight from At&t about 2 weeks ago
I tried following http://forum.xda-developers.com/showthread.php?t=1963790 and everything seamed to work during the process but now superSU doesn't work
Thank you for any help!

woerner said:
Right now it should be just stock 4.3 straight from At&t about 2 weeks ago
I tried following http://forum.xda-developers.com/showthread.php?t=1963790 and everything seamed to work during the process but now superSU doesn't work
Thank you for any help!
Click to expand...
Click to collapse
If you have knox installed, that could be interfering with root access.

audit13 said:
If you have knox installed, that could be interfering with root access.
Click to expand...
Click to collapse
I have not personally put Knox on the phone but when i go into settings/security/device administrators. It lists Knox as one with an unchecked box so dose that mean its on the phone? and if so how would i go about removing it.
also if i don't necessarily need to root to load a custom ROM where could i be directed to be able to load 4.4?
Thanks!
---------- Post added at 02:54 AM ---------- Previous post was at 02:35 AM ----------
audit13 said:
If you have knox installed, that could be interfering with root access.
Click to expand...
Click to collapse
The end result of what i want to accomplish is to load http://forum.xda-developers.com/showthread.php?t=2556839
again thank you for the help!

woerner said:
I have not personally put Knox on the phone but when i go into settings/security/device administrators. It lists Knox as one with an unchecked box so dose that mean its on the phone? and if so how would i go about removing it.
also if i don't necessarily need to root to load a custom ROM where could i be directed to be able to load 4.4?
Thanks!
---------- Post added at 02:54 AM ---------- Previous post was at 02:35 AM ----------
The end result of what i want to accomplish is to load http://forum.xda-developers.com/showthread.php?t=2556839
again thank you for the help!
Click to expand...
Click to collapse
so i think that my phone is rooted and i am trying to flash the ROM but the Error i am getting is...
set_metadata_recusive: some changes failed
E: Error executing updater binary in zip '.extern
Error flashing zip '/external_sd/Gummy-M. 1-02-27
Any Idea?

woerner said:
I have not personally put Knox on the phone...
Click to expand...
Click to collapse
The 4.3 OTA installs Knox without checking if you want it or not. Fortunately there are ways to remove it after the fact. Most suggestions I have seen recommend using CF-AutoRoot, updating SuperUser, and then going into SuperUser to disable Knox. You don't need root to install custom ROMs but as far as I know you need it to remove Knox. Removing Knox seems to be necessary in order to get the custom recovery required to flash custom ROMs.
|Guide|How-To| Root & Install Custom Recovery for 4.3 Update
[CWM][4.2.2/4.3/4.4] DE-SAMSUNGNIZER Script V5.0.0 - Clean all unneded Samsung Crap contains scripts to remove Samsung bloat and others that seem to just remove Knox.
I was about to offer no comment on the ROM to which you linked because it is in the Verizon forum, but then I noticed the d2lte in the description. My understanding is that d2lte is good for all US SGS3 variants. (Gummy says this in it's forum.) Maybe you can get around using a custom recovery with some ROMs, but the Gummy ROM comes as a recovery flashable zip. So, it looks like: root, remove knox, install custom recovery, flash rom.
---------- Post added at 10:26 PM ---------- Previous post was at 10:14 PM ----------
woerner said:
so i think that my phone is rooted and i am trying to flash the ROM but the Error i am getting is...
set_metadata_recusive: some changes failed
E: Error executing updater binary in zip '.extern
Error flashing zip '/external_sd/Gummy-M. 1-02-27
Any Idea?
Click to expand...
Click to collapse
From reading quite a few ROM threads I have learned that the updater scripts have code that indicates which devices they will work on and will cause the install to fail if you are trying to flash an incompatible ROM to a device. Sometimes these scripts have not been updated to reflect ROM compatibility with devices and editing the updater script will correct this. This is best verified in the ROM thread. Something to check for yourself before posting would be that you are using a compatible ROM version. The d2lte files should work with any of the US variants. If you downloaded one of the older files there is then the need to make sure it works with your device, unless you are confident about editing the script.
Other possible causes of your error:
1) it could be that the zip is on the external_sd and the installer expects it on the internal
2) you have a bad ROM download

From reading quite a few ROM threads I have learned that the updater scripts have code that indicates which devices they will work on and will cause the install to fail if you are trying to flash an incompatible ROM to a device. Sometimes these scripts have not been updated to reflect ROM compatibility with devices and editing the updater script will correct this. This is best verified in the ROM thread. Something to check for yourself before posting would be that you are using a compatible ROM version. The d2lte files should work with any of the US variants. If you downloaded one of the older files there is then the need to make sure it works with your device, unless you are confident about editing the script.
Other possible causes of your error:
1) it could be that the zip is on the external_sd and the installer expects it on the internal
2) you have a bad ROM download
Click to expand...
Click to collapse
Well i think i "Soft Bricked" my phone. currently stuck in a reboot loop but can still boot into recovery and download but nothing seams to be able to get me out of this loop

Look in the development thread for a way to flash back to stock 4.3.

Root problem solved
I have an AT&T S3 SGH-i747. The problems I had with rooting was all related to Knox, unfortunately I had no way to get rid of Knox.
Please follow the web link and follow all the steps in order. The short version of the steps is you install the TWRP recovery using Odin, then boot back into recovery , install SuperSU and then Knox removal script via recovery. After that enjoy whatever custom ROM you want. I'm running the KitKat 4.4 now :good:
As a note getting to the correct download link can be a pain due to the bait and switch of the "download now" button with other shareware apps but the links provided to lead you to the correct zip files.
** honai-android.blogspot.com/2014/02/how-to-root-galaxy-s3-at-sgh-i747-twrp.html **

SGHI-I747 4.3 root wifi tether
I have a SGHI-I747 4.3 I am wondering if I am able to root it with the instructions from http://forum.xda-developers.com/showthread.php?t=1963790&nocache=1 I do not see my phone listed.
I would like to disable knox also and enable wifi tether.
Any help would be much appreciated thanks.

CF-AutoRoot should work fine. But theres also Towelroot now, which is much, much, much easier!
After rooting with Towelroot, install SuperSU from the play store. Then open it and update the binary and disable knox.

DocHoliday77 said:
CF-AutoRoot should work fine. But theres also Towelroot now, which is much, much, much easier!
After rooting with Towelroot, install SuperSU from the play store. Then open it and update the binary and disable knox.
Click to expand...
Click to collapse
Sent from my LG-D851 using XDA Free mobile app

[Q] Pre & Post root questions

Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!

wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Currently I'm at v4.3 (touchwiz) and haven't done the latest OTA yet (presumably it's v4.4.2). It'd be best to do the OTA update and then root, right? Reading the earlier post, it
appears this method works for v4.4...
While posting, also is it possible to downgrade back to v4.3 from v4.4? Not that I'm planning on it, but have read both yes and no on doing it and just wondered.
Thanks in advance and do advise if there's anything I should watch out for while doing this!!
Click to expand...
Click to collapse
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?

wha2do said:
Planning on rooting my P600 and after reading Hahahalalala's earlier post, will follow BeansTown106's instructions (http://forum.xda-developers.com/showthread.php?t=2490805).
It appears I need to flash from p600Autoroot.7z for v4.3 and CF-Auto-Root-lt03wifi-lt03wifixx-smp600.zip for v4.4? Please correct me if I'm wrong?!
On step 4, it says to "...flash the stock mj4 recovery provided". Planning on installing TWRP v2.7.1.0 - can I just do it here? Or do I need to do this step and afterwards install
TWRP (and flash Super SU)? I'm curious about the reason for flashing the stock recover and whether it's version specific...
Click to expand...
Click to collapse
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.

buhohitr said:
1) If you flash twrp then you can't do OTA any more
2) The root instruction would work but will trip the Knox and void warranty.
3) Not possible to downgrade back to 4.3
4) if you not use twrp but reflash stock recovery image then OTA would work but will wipe out root if you take the OTA upgrade what ever that maybe 4.4.3?
Click to expand...
Click to collapse
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!

deV14nt said:
I used these full instructions for Kit-Kat: http://forum.xda-developers.com/showthread.php?t=2719750
One step in that is the CF-autoroot, but there are other steps as well. I just ignored the "To Flash New Update" part, but maybe you need it. I was already on the latest OTA before I started. Trips knox but I'm sure you knew that.
Click to expand...
Click to collapse
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!

wha2do said:
Thanks! Yep, not concerned about warranty at this point... And figure will do the OTA and then root...
Actually latest posts appear to show some issues with SU when using CF-autoroot (maybe due to them being on kitkat?). Appears flashing CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5 does the trick. Sounding like it's part
of the flash, and can then just flash twrp (figuring be safe with v2.6.x for now).
If not reading this right, anyone feel free to correct me before I "jump", lol!
Click to expand...
Click to collapse
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk

wha2do said:
1) That's why I figured best to do the OTA first - just had other devices that didn't have root methods for the newest update & wanted to thought best to ask first!
2) I'm out of warranty (due to drop and repaired screen) so warranty is of no issue...but thanks for the warning
3) Thought that to be the case, but again hearing it may be possible and also can't. Don't foresee doing it, but was curious...
4) Plan on flashing the latest (CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5) via odin, reboot, flash twrp v2.6.x as I hear 2.7.x may have a few issues. Only problems I've read are potential with Super SU - not sure if it's part of the root flash, needs to be flashed
separately, or just dl'd from Google Play Store? Guess will just flash root, see if app is there, if not try Play Store. If not, then go back and find the flashable SU dl.
Thanks!
Click to expand...
Click to collapse
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.

22sl22 said:
Su is fine with me after cf root.
In my signature is a guide to rooting with kitkat (second post)
Follow that and you'll be good : good:
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Thanks - that was the post had been reading through - appears after the kitkat OTA, latest posts mentioned problems with SU when running the original CF-AUTO Root method (flashing autorootp600mj4.tar.md5). Wondering if flashing the "newer" CF-Auto-Root-lt03wifi-lt03wifixx-smp600.tar.md5
would be best. At this point feel confident either way!
deV14nt said:
Yeah you want TWRP 2.6.3.3. It won't work right with 2.7.x. Might as well flash the SuperSU. Most of the root apps worked fine but Viper4Androod did not find Busybox even after using the installer. Need to go back a version of V4A too due to bugs but it still didn't work. Tried freezing Knox apps that might be interfering but eventually just installed that MagazineUX ROM and now it works. Everything else should work easier.
Click to expand...
Click to collapse
Yep, will be downloading TWRP v2.6.3.3 and flash it and SuperSU after rooting. After rooting, will be curious to see where I sit with superuser (sorry, reading the latest posts kind of muddy whether a SU app is already installed or not, lol)...
Thanks everyone for all the great input & help!!

[GUIDE] how to root Sph-L710/L710T S3 4.4.2 (updated as of 8/19/2015)

I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse

work on ND8 rom? sprint phone?

Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders

Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!

oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.

henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?

6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.

I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app

jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....

Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave

dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM

churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.

Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all

Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!

6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.

Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be

6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.

Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!

strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff

added two more t=root methods

SuperSU Error after cf-auto

Hi friendly xda android enthusiasts. I have, after many issues, finally rooted my gt-n5110 using odin and cf-auto. Workered without a hitch. Odin passed, tab rebooted, and BAM, "superSU has stopped working". I immediately navigated myself over to the playstore to reinstall SuperSU and for the first time i have ever seen it wouldnt allow me to. It only gave me a choice to open. No update no uninstall. Going into my apps list it was not present on downloads but was available on device list. Clucked it and no option to uninstall, only to force stop or turn off. So it is incorporated as a system with no access to it. This has me stumped. I have only seen old threads with answers to this and they are temp fixes. Need to know what i can do to fix this on a permanent basis and if someone could help me understand how and why this issue occured it would give me a better understanding and possibly prevent further issues. Thanks in advance guys.

Try the flashable version in this post after you install a custom recovery with odin.
ramjet73

ramjet73 said:
Try the flashable version in this post after you install a custom recovery with odin.
ramjet73
Click to expand...
Click to collapse
This may be a very stupid question but i have to be sure. As i stated the odin DID pass the auto root and tab rebooted. But along with the superSU error i ran root checker and was unable to obtain root. Im assuming its because supersu is not embedded. So with that said is it still ok to attempt to flash a recovery to the tab?

mattdiehl83 said:
This may be a very stupid question but i have to be sure. As i stated the odin DID pass the auto root and tab rebooted. But along with the superSU error i ran root checker and was unable to obtain root. Im assuming its because supersu is not embedded. So with that said is it still ok to attempt to flash a recovery to the tab?
Click to expand...
Click to collapse
Yes. Recovery is independent of whether or not you are rooted. You can install it from Android using tools like Flashify once you are properly rooted, but Odin works fine as long as you have a version of recovery in that format.
Flashing SuperSU from a custom recovery once it is installed should fix the superuser problems you are having.
ramjet73

ramjet73 said:
Yes. Recovery is independent of whether or not you are rooted. You can install it from Android using tools like Flashify once you are properly rooted, but Odin works fine as long as you have a version of recovery in that format.
Flashing SuperSU from a custom recovery once it is installed should fix the superuser problems you are having.
ramjet73
Click to expand...
Click to collapse
Doing now. Thankyou. Fingers crossed.

I had the same issue on my 5110. The flashable root only worked for me until I rebooted, then it would lose root. What ultimately worked for me was to unroot with Kingo. Then with USB debugging enabled, re-rooted with Kingo (which took around 10 min).
Sent from my AT&T Galaxy Note 3 using Tapatalk®

andygev35 said:
I had the same issue on my 5110. The flashable root only worked for me until I rebooted, then it would lose root. What ultimately worked for me was to unroot with Kingo. Then with USB debugging enabled, re-rooted with Kingo (which took around 10 min).
Click to expand...
Click to collapse
If flashing SuperSU from recovery doesn't result in a successful rooted system someone should let @Chainfire know. I've never had a problem rooting a stock ROM that way but let's see what @mattdiehl83 reports.
ramjet73

OS X
ramjet73 said:
If flashing SuperSU from recovery doesn't result in a successful rooted system someone should let @Chainfire know. I've never had a problem rooting a stock ROM that way but let's see what @mattdiehl83 reports.
ramjet73
Click to expand...
Click to collapse
Not near pc. Only have OS X available now. Can anybody walk me through using OS X to flash?

mattdiehl83 said:
Not near pc. Only have OS X available now. Can anybody walk me through using OS X to flash?
Click to expand...
Click to collapse
The recovery? I don't know if there is an OS X version of Odin.
ramjet73

ramjet73 said:
The recovery? I don't know if there is an OS X version of Odin.
ramjet73
Click to expand...
Click to collapse
I am wondering what flashing tool to use with OS X. Odin is for windows. I know of heimdall but that requires ALOT to flash anything. Wondering if there is another odin like tool for OS X

You could try this: http://forum.xda-developers.com/showthread.php?t=2598203
Sent from my AT&T Galaxy Note 3 using Tapatalk®

done.
Hi guys sorry for the delay in update. I ended up using VM ware and it allowed to operate as windows on OS X. I installed TWRP, went into the file manager in TWRP and removed the superSU, i then flashed superSU and rebooted. Once back to the tablet i went and restored services to superSU and went into the play store. And finally the playstore gave me the option the update the superSU. And then the rest was all normal installation of superSU. Hope this thread helps anybody dealing with these issues.

Glad you got it working. :good:
This post in the CF-Autoroot thread might be helpful as well.
ramjet73

there is a easy way to fix it!
download supersu 2.02 and install ta da and it works
2.01 does not work with n5110 well if you flash cf auto root

hmmmm.....
Bordo_Bereli51 said:
there is a easy way to fix it!
download supersu 2.02 and install ta da and it works
2.01 does not work with n5110 well if you flash cf auto root
Click to expand...
Click to collapse
Tada..your a genius. Oh wait i believe i stated it didnt have that option it was disabled. Yes i decided scarcasm would be fitting due to the fact it says ALL OVER xda to please read before you post.

mattdiehl83 said:
Tada..your a genius. Oh wait i believe i stated it didnt have that option it was disabled. Yes i decided scarcasm would be fitting due to the fact it says ALL OVER xda to please read before you post.
Click to expand...
Click to collapse
I read all the post and didnt found something
YOU DONT NEED TO DELETE SUPERSU 2.0.1
Install 2.02 apk and go to supersu, then to settings and push to /system
This is the easiest way. the one you found: go to recovery delete that and this. download supersu 2.0.2 apk and install it not the recovery zip i mean the APK! i didnt say the flashable supersu zip.
oh wait, yes you are a intelligent boy, you know everything.

mattdiehl83 said:
I am wondering what flashing tool to use with OS X. Odin is for windows. I know of heimdall but that requires ALOT to flash anything. Wondering if there is another odin like tool for OS X
Click to expand...
Click to collapse
That's a bit of a dilemma.
Unfortunately Samsung does not support using fastboot and bootloader mode (they call it download mode) so that standard SDK tool Google provides for Windows, Linux and MAC OS X isn't applicable. Your best bet would be to find a Windows PC that you can use to flash the recovery with Odin since that is the most common and best documented method.
Edit: NVM, somehow I responded to an old post of yours.
ramjet73