Hi,
I recently rooted an Ace 2 that came to my hands and flashed the CM11 found here.
After this wifi wasnt working so I tried some other MODEM drivers with no success.
Decided that I'd prefer having a WiFi enabled phone even with stock rom, I flashed the Stock one found on Sammobile for the phones' carrier.
Carrier is Bell Canada by the way.
After flashing the stock rom, phone refuses to get into recovery mode, and also refuses to open in generaly, staying in the GT-S7560 bootup screen for an eternity (or at least the 7 hours I left it open).
Phone works in Download mode however, except whatever I do there is like pointless, since nothing happens.
So a quick view is:
1) Bell Canada
2) S7560MVLBNA5
3) Recovery doesn't work
4) Download mode works
5) Phone won't start
If anyone can point me to something I would appreciate it, and as of searching before posting, I did search but found 0 similar problems, since everyone elses semi-bricked devices, worked like a charm after stock rom was installed.
Thanks in advance.
Related
Just got Samsung Nexus Korean maguro variant yakju with 4.1 installed and with Baseband: UGKL1 and my network is Warid Tel - Pakistan. I used my local sim in as well and it was working fine. Today I tried to use custom 4.3.1 in it and so I done these steps:
Downloaded Nexus Root Toolkit, Android SDK, Latest Nexus drivers and all pre-requisites before starting. Now I first started to unlock my Bootloader with matching requirements as the tool already do this. Then flashed cwm touch recovery and applied root. I tool backup of my stock rom via cwm and then wipe all and installed liquidsmooth 2.7 which is jb 4.3.1 and it worked like a charm. What i noticed afterwards that the rom is reading my carrier details correctly but also showing Emergency call only warning as well. I tried Edge as well and it was wokring normally but when i tried to dial a call and tried to send txt it showed me Mobile network not avaialable. Then I tried all latest radio basebands on it, tried all settings SMSC and normal troubleshoots but couldn't get complete carrier support. Then I restored my default stock rom via cmw and boom no issues like it should be. Now my question is did I missed something for it? or am I flashing wrong basebands? or somthing else? After too many hours i felt that I cannot go further from here. I am attaching my screenshots. Please if anyone can tell me or guide me I will be very thankful to him as I haven't tried my phone yet, just got it. I had HTC evo 3d and its setup of everything never got me stucked like this.
Anybody up for help kindly
Sent from my Galaxy Nexus ...
I'm at loss here. I recently purchased what I thought was a stock standard Note 2. It seems the unit is originally from Korea. It has supposingly worked here in Australia (where I am).
I have tried to flash any Rom, and so far I have tried at least 15 (currently have Speedwizz Cent 2.1). The only one that works is the one that I found for the Telecom provider the phone was with (Olleh in Korea). Is there a possibility I can't flash a new rom, I have no idea what version was there prior. The one that will flash has no modem, and has apk's in Korean. It's of little use if I can't get the sim to work.
I have tried a number of the suggestions here, including wiping dalvik, data and using the XDLL7 recovery.tar. Seems to make little difference. Either the unit boots and then sits in logo mode, or the screen goes blank after a while. So far, I have always been able to get to Recovery or Odin mode.
Any help most appreciated. I need to make adecision on whether to send it back/dispute in ebay, so I'll try a few more times.
Hello Everyone. I've searched XDA and the net high and low trying to figure out what is going on here, but it has come time to post. Hopefully someone can point me in the right direction.
Bought my S3 from T-Mobile a few years ago, have installed a number of roms on it, but most recently updated to CM 10.2. I started having boot issues (phone would stop booting after a couple of restarts, not a sudden death syndrome phone, BTW). After using ODIN to load on root66-UVUEMJC (tmobile 4.3), and running into more issues, I ended up loading Stock 4.3 from Kies (yes, I realize this is a horrible mistake now).
That got me on my feet again, I used ODIN to install clockworkmod rom manager, then re-installed CM10.2. It was at this point where I noticed that I no longer had cellular network connectivity anymore. I've tried another t-mobile SIM in my phone to make sure it wasn't that, and it had the same problems:
On startup, my phone will connect to the cellular network and fill in all the fields under Status (including IMEI), but after a minute or so, I loose that and the device goes to "No Service". Nothing I've tried has been able to get this fixed. I have attempted to flash the latest modem as well with no luck.
As mentioned, any help would be greatly appreciated on what to look for / do to get this thing working so I don't have to drop a load on a new phone.
Thank you!
Help! I rooted my Galaxy S3 about 3 months ago. I wanted to return it to stock without root so I could use the stock recovery and receive the new 4.4 OTA. I found a file online off a YouTube video that I thought was for my phone. I flashed it using mobile ODIN and when it powered back up, I had no mobile network and could not make or receive calls. I tried another file I downloaded and I installed from zip when I was in receovery and now the phone will not power up and does not have the light on when its connected to a charger. It seems to be dead.
I installed from zip because it kept failing when I tried to use ODIN on my computer.
How do I fix? Can it be fixed? I don't know anything about all the technical stuff such as modems, kernels, etc. I should have left it alone!
Any suggestions?
It's an AT&T Galaxy S3 SGH-1747
marshall7678 said:
Help! I rooted my Galaxy S3 about 3 months ago. I wanted to return it to stock without root so I could use the stock recovery and receive the new 4.4 OTA. I found a file online off a YouTube video that I thought was for my phone. I flashed it using mobile ODIN and when it powered back up, I had no mobile network and could not make or receive calls. I tried another file I downloaded and I installed from zip when I was in receovery and now the phone will not power up and does not have the light on when its connected to a charger. It seems to be dead.
I installed from zip because it kept failing when I tried to use ODIN on my computer.
How do I fix? Can it be fixed? I don't know anything about all the technical stuff such as modems, kernels, etc. I should have left it alone!
Any suggestions?
It's an AT&T Galaxy S3 SGH-1747
Click to expand...
Click to collapse
sound like you've hard bricked your phone
here's the fix: http://forum.xda-developers.com/showthread.php?t=2549068 BE SURE TO READ IT THOROUGHLY
if that doesn't work for you, JTAG is your way out
Hello, I used to own a GS3 and had it rooted and everything just fine, but I sold it when I broke the screen. I recently purchased a used one off Ebay and want to get back root and custom ROM. The seller had the firmware updated to 4.4.2 stock and of course it is bloated to hell. I managed to get the root installed, however I flashed a new rom and modem and now have no network connection. I have tried modems LK3, MJ2, and MJB and none have worked. Also, somewhere down the line I managed to break the wifi, as when I try to turn on wifi it instantly switches off.
I remember it being very easy to root back when the device first came out, I was on a Galaxy Nexus previously and everything. Another thing to note, once I got the root installed I made a backup in cwm and even restoring this backup I have broken modem and wifi. How ****ed is my phone?
EDIT: I managed to find the elusive NE4 modem that was not in the "all modems" thread. This fixed my issue. Feel free to close thread mods
Closed at OP request.