Hello. I've got desire, stuck on htc without recovery. I find ruu wich flash succesfully but nothing happen. Fastboot works. I've got this log from phone and i've got:
--- AlphaRev ---
s-off
hboot - 6.93.1002
microp 051d
radio 4.06.00.02_2
what can i do?
C:\fastboot-win>fastboot oem gencheckpt
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::HTC__622
(bootloader) serial number: HT05PPL02709
(bootloader) commandline from head: no_console_suspend=1 msmsdcc_sdioirq=
(bootloader) 1 wire.search_count=5
(bootloader) command line length =467
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
(bootloader) =HTC__622 androidboot.carrier=Asia-HK-CHT androidboot.mid=PB
(bootloader) 9920000 androidboot.keycaps=qwerty androidboot.mode=recovery
(bootloader) androidboot.serialno=HT05PPL02709 androidboot.bootloader=6.
(bootloader) 93.1002 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_c
(bootloader) ount=5
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:106364 msec
czajnik said:
Hello. I've got desire, stuck on htc without recovery. I find ruu wich flash succesfully but nothing happen. Fastboot works. I've got this log from phone and i've got:
--- AlphaRev ---
s-off
hboot - 6.93.1002
microp 051d
radio 4.06.00.02_2
what can i do?
C:\fastboot-win>fastboot oem gencheckpt
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::HTC__622
(bootloader) serial number: HT05PPL02709
(bootloader) commandline from head: no_console_suspend=1 msmsdcc_sdioirq=
(bootloader) 1 wire.search_count=5
(bootloader) command line length =467
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
(bootloader) =HTC__622 androidboot.carrier=Asia-HK-CHT androidboot.mid=PB
(bootloader) 9920000 androidboot.keycaps=qwerty androidboot.mode=recovery
(bootloader) androidboot.serialno=HT05PPL02709 androidboot.bootloader=6.
(bootloader) 93.1002 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_c
(bootloader) ount=5
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:106364 msec
Click to expand...
Click to collapse
Try installing 4ext recovery from the fastboot way?
Sent from my HTC Desire using XDA Free mobile app
lilsafbig said:
Try installing 4ext recovery from the fastboot way?
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
sure, i try twrp, 4ext and cwm, nothing happen, i can try again, do You suggest any version of 4ext recovery?
czajnik said:
sure, i try twrp, 4ext and cwm, nothing happen, i can try again, do You suggest any version of 4ext recovery?
Click to expand...
Click to collapse
So u can't get into recovery?
Sent from my HTC Desire using XDA Free mobile app
Yes, even if i flash it it won't boot
czajnik said:
Yes, even if i flash it it won't boot
Click to expand...
Click to collapse
Maybe is u do usb unbrick it might work. In 4ext
Sent from my HTC Desire using XDA Free mobile app
czajnik said:
sure, i try twrp, 4ext and cwm, nothing happen, i can try again, do You suggest any version of 4ext recovery?
Click to expand...
Click to collapse
czajnik said:
Yes, even if i flash it it won't boot
Click to expand...
Click to collapse
- How are you flashing the recovery? Should be done by flashing the recovery.img using fastboot commands. Does it give a successful message?
- When you say "it won't boot", do you mean the phone or recovery? What happens when you select recovery from the bootloader?
- If you can't get into any recovery, try the 2.3.3 GB RUU, no other RUU. Refer to bortak's troubleshooting guide at the top of Q&A
eddiehk6 said:
- How are you flashing the recovery? Should be done by flashing the recovery.img using fastboot commands. Does it give a successful message?
Click to expand...
Click to collapse
Yes. Writing succesfull
eddiehk6 said:
- When you say "it won't boot", do you mean the phone or recovery? What happens when you select recovery from the bootloader?
Click to expand...
Click to collapse
Phone and recovery
eddiehk6 said:
- If you can't get into any recovery, try the 2.3.3 GB RUU, no other RUU. Refer to bortak's troubleshooting guide at the top of Q&A
Click to expand...
Click to collapse
i downloading it now. i check it
After update 2.3.3 official RUU it loop in restarts on htc logo
Strange that recovery doesn't even boot
What does it now say in bootloader?
S-ON / S-OFF?
Has radio version upgraded? Noticed in your first post 4.06.00.02_2 is an ancient eclair version I believe.
I would try:
- Flash latest radio.img using fastboot from here
- Flash downgrader.img from alpharev.nl
- Flash 2.3.3 RUU using the PB99IMG.zip method, Step 7 in bortak's guide
Just want to get everything completely stock, s-on and up to date, hopefully it will boot. Output any error messages when the RUU is flashing.
Now i've got 5.17.05.23 radio
S-OFF.
fastboot flash radio radio.img ?
from alpharev i must download bravo_downgrade.img ?
okay, i've doing borak's [7] and
[P1/STEP2]- Download the Alpharev Downgrader PB99IMG (MD5: 6c482ccfa6b7093de4ee1a5804ccbdfc - check MD5 matches with MD5 checker, link below)
PB99IMG and it won't flash from sd. I flaash bravo_downgrade.img from fastboot but i've got s-off still. hboot changes at 6.93.9999
i've try now flash rom.zip from ruu renamed to PB99IMG and that also won't flash
ok i'm again run ruu. now i'm s-on
hboot - 1.02.0001
radio 5.17.05.23
but still not booting nothing, recovery and phone
czajnik said:
Now i've got 5.17.05.23 radio
S-OFF.
fastboot flash radio radio.img ?
from alpharev i must download bravo_downgrade.img ?
okay, i've doing borak's [7] and
[P1/STEP2]- Download the Alpharev Downgrader PB99IMG (MD5: 6c482ccfa6b7093de4ee1a5804ccbdfc - check MD5 matches with MD5 checker, link below)
PB99IMG and it won't flash from sd. I flaash bravo_downgrade.img from fastboot but i've got s-off still. hboot changes at 6.93.9999
i've try now flash rom.zip from ruu renamed to PB99IMG and that also won't flash
Click to expand...
Click to collapse
- You don't need to flash another radio.img as you now already have the latest.
- Flashing the downgrader.img does not make it S-ON, it just allows it to become S-ON after you flash an RUU.
- If you flashed the downgrader.img from fastboot successfully, I believe it should say 'Alpharev Unlock' at the top of the bootloader screen.
- You definitely extracted the ROM.zip from the RUU, not simply renamed the RUU? Exactly as in Step 7 of the guide?
- Make sure the file is renamed exactly to "PB99IMG.zip", and not "PB99IMG.zip.zip"
- When you say won't flash, be specific. Is the PB99IMG.zip detected in bootloader at all? Or does it try to flash but with error messages? Can you try with a different sdcard if it doesn't detect it?
eddiehk6 said:
- If you flashed the downgrader.img from fastboot successfully, I believe it should say 'Alpharev Unlock' at the top of the bootloader screen.
Click to expand...
Click to collapse
after ruu from pc alpharev dissapear, i've got s-on
eddiehk6 said:
- You definitely extracted the ROM.zip from the RUU, not simply renamed the RUU? Exactly as in Step 7 of the guide?
Click to expand...
Click to collapse
yes
eddiehk6 said:
- Make sure the file is renamed exactly to "PB99IMG.zip", and not "PB99IMG.zip.zip"
Click to expand...
Click to collapse
i'm sure
eddiehk6 said:
- When you say won't flash, be specific. Is the PB99IMG.zip detected in bootloader at all? Or does it try to flash but with error messages? Can you try with a different sdcard if it doesn't detect it?
Click to expand...
Click to collapse
No image or wrong file at all. Yes i can check it on other sd card.
czajnik said:
after ruu from pc alpharev dissapear, i've got s-on
yes
i'm sure
No image or wrong file at all. Yes i can check it on other sd card.
Click to expand...
Click to collapse
Did u put the pb99img.zip in the root of your sd card?
Sent from my HTC Desire using XDA Free mobile app
sure, i'm not so lame as you think
czajnik said:
sure, i'm not so lame as you think
Click to expand...
Click to collapse
Just to be sure:
http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
czajnik said:
sure, i'm not so lame as you think
Click to expand...
Click to collapse
Haha we just have to make sure.
Been around here long enough, and seen both errors several times.
I'm certain you can rescue your phone somehow though. Let us know what you try, and write out any error messages exactly
eddiehk6 said:
Haha we just have to make sure.
Been around here long enough, and seen both errors several times.
I'm certain you can rescue your phone somehow though. Let us know what you try, and write out any error messages exactly
Click to expand...
Click to collapse
haha ;d you can trust me, i know a android basics
in attachment picture of errors. other sd tried and still the same,
I try flash couple of recoveries, 2-3 ruu and at last 2.3.3 ruu gb. And things in this topic, lastest radio, hboot, downgrader etc
czajnik said:
haha ;d you can trust me, i know a android basics
in attachment picture of errors. other sd tried and still the same,
I try flash couple of recoveries, 2-3 ruu and at last 2.3.3 ruu gb. And things in this topic, lastest radio, hboot, downgrader etc
Click to expand...
Click to collapse
Looks like you've gone back to stock but its searching for that pb99img file to change hboot? You can flash 4ext recovery that way too.
Sent from my HTC Desire using XDA Free mobile app
i try flash 4ext now from fastboot but signature veryfication fails
czajnik said:
i try flash 4ext now from fastboot but signature veryfication fails
Click to expand...
Click to collapse
Cos ur s on that wont work until ur s off but idk what to do?
Sent from my HTC Desire using XDA Free mobile app
Related
After flashing RUU fails with
Hi,
I'm just trying to get my Desire back to stock so I can sell it but the RUU that I have used in the past has failed. I've run the downgrader and flashed the stock ROM from Alpharev but now when I try to re-apply the RUU I get the black HTC screen with 4 warning triangles in the corners of the screen. If remove the USB an dreconnect then I get this....
---Alpharev----
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
RUU
1 Bootloader - Bypassed
2 Radio V2 - FAIL-PU
3 RADIO CUST - OK
4 BOOT - OK
5 RECOVERY - OK
6 SYSTEM - OK
7 USERDATA - OK
8 SPLASH1 - OK
9 SPLASH2 - OK
Partition update fail!
Update fail!
If I run fastboot oem boot then I get this...
C:\AndroidSDK\tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x26A0D
(bootloader) TAG:hero panel = 0x3
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is ORANG001
(bootloader) setting->cid::ORANG001
(bootloader) serial number: SH09DPL01345
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =423
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=O
(bootloader) RANG001 androidboot.carrier=ORANGE-UK androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=SH09DPL01345 androidboot.bootloader=6.93.100
(bootloader) 2 no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:423443 msec
FAILED (status read failed (Too many links))
finished. total time: 99.905s
I've got a gold card in. I'm not sure if I'm missing a partition or if my goldcard needs recreating. Oh, and I have tried various RUU's but no luck with any of them.
Does anyone have any ideas? Let me know if you need any more info.
Many thanks,
Baz
Did you flashed Stock Hboot partition table before downgrader?
I did bravo_downgrade.img followed by bravo_alphaspl.img and then the RUU.
Is there another one I have to do?
have you tried to run the RUU again while on the four-triangle-screen? that solved it for me.
Sent from my HTC Desire using xda premium
Don't open two threads about the same problem.
SwiftKeyed from CyanogenMod with Transparent XDA App
@Tillus - I had tried re-running the RUU but with no luck. I've also tried various other RUU's but can't get anything.
@MatDrOiD - Sorry, I think that's a forum screw-up because I was safely tucked up in bed at 12:48am. In response to your post on the other thread, I have flashed bravo_downgrade.img As far s I know that's the hboot downgrader, no?
Looks like a radio brick to me. You can try a,few things but you may end up contacting HTC
Sent from my HTC Desire using XDA App
I did bravo_downgrade.img followed by bravo_alphaspl.img and then the RUU.
Is there another one I have to do?
Click to expand...
Click to collapse
Why did you flash the stock after the downgrader?
First Flash the stock, then the downgrader.
That's why the bootloader is bypassed and radio can not be updated.
Exactly.
First you have to flash the partition table image, and then run the downgrader... if you do it backwards results might be unpredictable.
You do not have to flash stock, downgrader is enough. After downgrader run RUU and it will succeed.
Thanks Dave, I'll give that a go as soon as I've had a cup of tea. I did things that way round because I had an issue once before and someone said that was the way to fix it and it worked so this time I just did the same again. I'll get back to you and let you know how things went.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
OK, I flashed stock followed by the downgrader and then ran the RUU. My fault has changed to something that strikes me as being rather more serious. I have a feeling I was lead to the wrong RUU (RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704) as after I ran this my screen went off and hasn't come back on at all so I'm thinking this might be a RUU for the led version of the Desire. Also I no longer have Super CID which seems to be preventing me from doing any further flashing. I'm just looking into reflashing misc to see if that might help.
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
RockyGothyBaz said:
OK, I flashed stock followed by the downgrader and then ran the RUU. My fault has changed to something that strikes me as being rather more serious. I have a feeling I was lead to the wrong RUU (RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704) as after I ran this my screen went off and hasn't come back on at all so I'm thinking this might be a RUU for the led version of the Desire. Also I no longer have Super CID which seems to be preventing me from doing any further flashing. I'm just looking into reflashing misc to see if that might help.
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
Click to expand...
Click to collapse
why if you have dozen of ruu available, newbie always choice the damn old one??? U have to choice the damn last one! What wrong with the latest? How you can flash a such old ruu?
The next time, ask a confirmation before flash an ruu.
RockyGothyBaz said:
Current problems: No Super CID, No display, only boots into fastboot.
...oh bugger :-/
Click to expand...
Click to collapse
IF it boots into fastboot, you can flash a newer RUU, try the latest one, not one of the oldest
Hey guys,
I've also got a device from a mate who completely screwed it up. I also tried to flash the latest RUU but it failed.
My understanding is that with the device blocked at the HTC with 4 triangles boot, my only option is to use a Goldcard because of S-ON.
However my understanding is that to create a Goldcard you need to do this from your device whilst its working. Is it possible to create a goldcard without the device?
Thanks.
makcrellon said:
Hey guys,
I've also got a device from a mate who completely screwed it up. I also tried to flash the latest RUU but it failed.
My understanding is that with the device blocked at the HTC with 4 triangles boot, my only option is to use a Goldcard because of S-ON.
However my understanding is that to create a Goldcard you need to do this from your device whilst its working. Is it possible to create a goldcard without the device?
Thanks.
Click to expand...
Click to collapse
Read my thread.
Hello.
So I have a bricked(?) Desire. S-ON. And it got stuck in the RUU mode. RUU can't be installed because of Radio_V2 update fail and the phone runs with 4 triangles in the corners and htc on the black background. I'm not able to flash anything via fastboot because of signatures checking.
What can I do to get this phone working?
That RUU was 2.3 update.
HBoot 1.02.0001
Radio 5.17.05.23
I have still access to the phone but only via fastboot.
wojtal said:
Hello.
So I have a bricked(?) Desire. S-ON. And it got stuck in the RUU mode. RUU can't be installed because of Radio_V2 update fail and the phone runs with 4 triangles in the corners and htc on the black background. I'm not able to flash anything via fastboot because of signatures checking.
What can I do to get this phone working?
That RUU was 2.3 update.
HBoot 1.02.0001
Radio 5.17.05.23
I have still access to the phone but only via fastboot.
Click to expand...
Click to collapse
Write me complete text from phone's bootloader.
So here is what I get after unplugging the USB cable out of the phone:
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCh PANEL-SYNT0101
RADIO-5.17.05.21
Jul 22 2011,16:19:16
RUU
Click to expand...
Click to collapse
And here goes everything that's written out of the "fastboot oem boot":
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E0800C4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: [here goes my phone's serial number]
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =460
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.17.05.23 androidboot.cid=H
(bootloader) TC__032 androidboot.carrier=HTC-EastEurope androidboot.mid=P
(bootloader) B9920000 androidboot.keycaps=qwerty androidboot.mode=normal
(bootloader) androidboot.serialno=HT03NPL01513 androidboot.bootloader=1.0
(bootloader) 2.0001 zygote_oneshot=off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:132630 msec
FAILED (status read failed (Too many links))
finished. total time: 20.502s
Click to expand...
Click to collapse
Edit: I forgot to mention that the phone vibrates 7 times (with green htc logo on the white background) and goes back to black htc logo (with exclamation marks in corners) after "fastboot oem boot".
wojtal said:
So here is what I get after unplugging the USB cable out of the phone:
And here goes everything that's written out of the "fastboot oem boot":
Edit: I forgot to mention that the phone vibrates 7 times (with green htc logo on the white background) and goes back to black htc logo (with exclamation marks in corners) after "fastboot oem boot".
Click to expand...
Click to collapse
Put the phone in the freezer for about 20-30 minutes (I'M SERIOUS), take it out and try again,
I don't understand...
1. How could it help?
2. Without battery?
wojtal said:
I don't understand...
1. How could it help?
2. Without battery?
Click to expand...
Click to collapse
It's the known issue with PVT1 motherboard (some kind of overheating). Several people managed to restore their phones using freezer.
It doesn't matter how you will put it cause point is cooling of motherboard, just put in some freezer bag or something.
And take a look here:
http://forum.xda-developers.com/showthread.php?t=1774330&page=2
I've just put the phone into my freezer. 30 minutes and I'll try to update with the RUU.
Edit: How long should I wait after taking the phone out of the freezer?
wojtal said:
I've just put the phone into my freezer. 30 minutes and I'll try to update with the RUU.
Edit: How long should I wait after taking the phone out of the freezer?
Click to expand...
Click to collapse
Don't wait try immediately.
I tried and it failed to update Radio_V2 again (Fail-PU).
What should I do now?
wojtal said:
I tried and it failed to update Radio_V2 again (Fail-PU).
What should I do now?
Click to expand...
Click to collapse
try and try again
Sent from my HTC Desire
wojtal said:
I tried and it failed to update Radio_V2 again (Fail-PU).
What should I do now?
Click to expand...
Click to collapse
Try with Bortak's guide, creating PB99IMG.zip and running from sd-card.
nlooooo said:
Try with Bortak's guide, creating PB99IMG.zip and running from sd-card.
Click to expand...
Click to collapse
But it's in RUU mode, how could it read this file from sd card? It doesn't go into hboot/fastboot mode...
I tried "fastboot flash zip PB99IMG.zip" and... Radio part:
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,7
(bootloader) [RUU]UZ,radio,15
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,31
(bootloader) [RUU]UZ,radio,39
(bootloader) [RUU]UZ,radio,47
(bootloader) [RUU]UZ,radio,54
(bootloader) [RUU]UZ,radio,59
(bootloader) [RUU]UZ,radio,66
(bootloader) [RUU]UZ,radio,74
(bootloader) [RUU]UZ,radio,82
(bootloader) [RUU]UZ,radio,90
(bootloader) [RUU]UZ,radio,97
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,6
(bootloader) [RUU]WP,radio,14
(bootloader) [RUU]WP,radio,22
(bootloader) [RUU]WP,radio,30
(bootloader) [RUU]WP,radio,38
(bootloader) [RUU]WP,radio,100
Click to expand...
Click to collapse
And it failed because of:
FAILED (remote: 51 partition update fail)
finished. total time: 161.183s
Click to expand...
Click to collapse
wojtal said:
But it's in RUU mode, how could it read this file from sd card? It doesn't go into hboot/fastboot mode...
Click to expand...
Click to collapse
Just put the whole rom.zip as PB99IMG.zip on sd-card and reboot to bootloader with power+vol down. Try several times, many users succeeded after many tries. If you have no luck at the end it's definitely a full radio brick.
nlooooo said:
Just put the whole rom.zip as PB99IMG.zip on sd-card and reboot to bootloader with power+vol down. Try several times, many users succeeded after many tries. If you have no luck at the end it's definitely a full radio brick.
Click to expand...
Click to collapse
Just do "fastboot reboot" while holding vol-down+power? If yes, it doesn't work. (However, it still executes fastboot commands.)
And one more question - is it important to have a goldcard when trying to do all these things (and if it's S-ON)?
wojtal said:
And one more question - is it important to have a goldcard when trying to do all these things (and if it's S-ON)?
Click to expand...
Click to collapse
the goldcard is for bypassing the cid check of the ruu
Sent from my HTC Desire
jmcclue said:
the goldcard is for bypassing the cid check of the ruu
Sent from my HTC Desire
Click to expand...
Click to collapse
So it's not required?
Radio_V2 doesn't update no matter how I try...
wojtal said:
So it's not required?
Radio_V2 doesn't update no matter how I try...
Click to expand...
Click to collapse
Try with freezer again.
If this is a radio brick, freezer wont help at all.
Unfortunately there is only 1 solution for radio bricks: service.
hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks
kammy6000 said:
hello, this desire is kicking my ass, 4 days not fixed? of trying and searching, can some one please help
was on orange,uk,htc branded dont know if was orange branded
tried several roms some they give error or just gets to black htc screen (waited) 30 min nothing
reboot loop after s-off ?
can flash this from gold card, shipped-roms.com/download.php?category=android&model=Bravo&file=OTA_Bravo_Froyrange_CH_2.22.71.4-2.22.71.2_releasevrnkzrd85wxshyvx.zip
but then just reboots continously
here is info i have
READING INFO: OK!
10:50:33 > MODEL: BRAVO / bravo
10:50:33 > VERSION: 0.5/None/0.93.0001
10:50:33 > FIRMWARE: 2.29.405.2/5.11.05.27
10:50:33 > HARDWARE: HBOOT-8x50
10:50:33 > HTC DESIRE READ INFO: END!
-----------------------------------------------------------------
C:\Users\POWERTECH 6000\AppData\Local\Android\android-sdk\platform-tools>fastboo
t oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is empty
(bootloader) setting->cid::11111111
(bootloader) serial number: HT03PPL06282
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =417
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.27 androidboot.cid=1
(bootloader) 1111111 androidboot.carrier=ALL androidboot.mid=PB992**** an
(bootloader) droidboot.keycaps=qwerty androidboot.mode=normal androidboot
(bootloader) .serialno=HT03PPL06282 androidboot.bootloader=0.93.0001 no_c
(bootloader) onsole_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:56610 msec
FAILED (status read failed (Too many links))
finished. total time: 6.879s
which ruu can i use just want to factory or get going in anyway i also noticed bottom end of phone gets really warm sometimes ?
thanks
Click to expand...
Click to collapse
2.3 RUU.
desire
nlooooo said:
2.3 RUU.
Click to expand...
Click to collapse
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks
kammy6000 said:
hi thanks for help , i get error 155 ,please use correct update?
i am putting in fastboot to bypass battery low error!
is this incorrect?
i have s-off
hboot 0.93.001
thanks
Click to expand...
Click to collapse
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe
desire
race55 said:
You cannot ruu while s-off is there. Make it S-ON and try aggain, but before making s-on flash a custom recovery. Just to be safe
Click to expand...
Click to collapse
thank you for telling me s must be on that why not work!
i tried to put recovery image bravo from clockwork from fastboot but no work cos i dont have eng boot i think,android flasher need eng boot aswell and i am not rooted
can you please tell me how to put s-off again please so i just factory
thanks
I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders
desire
nlooooo said:
I'm not sure what are you talking about, what custom recovery before you do s-on?
The proper way to do that is to flash downgrade hboot from alpharev via fastboot and then run ruu.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks
kammy6000 said:
ok sorry, phone was unlocked/ s off by, xtc clip
so no recovery installed!
i tried to write the image from alpharev website with fastboot commands i get starting recovery, then remote not allowed
C:\Users\ kammy\AppData\Local\Android\android-sdk\platform-tools>fastboo
t flash recovery bravo.img.img
sending 'recovery' (3256 KB)...
OKAY [ 0.485s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.502s
C:\Users\kammy\AppData\Local\Android\android-sdk\platform-tools>^A
how can i write the new img please, i am not very good with htc
thanks
Click to expand...
Click to collapse
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire
desire
jmcclue said:
nlooooo ment flash Alpharev downgrader.img then run 2.3 ruu
Sent from my HTC Desire
Click to expand...
Click to collapse
can you tell me how to do that i thought it was through the run fastboot commands (i get errors) is there another way from sd card or something
or is there a exe file? sorry for noob q's
ok do i burn the alpharev iso to disk then boot from it then install new img to phone from the program?
thanks
As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).
desire
nlooooo said:
As I understood you got s-off via htc site?
Then you don't have access to radio and hboot partitions only to recovery, system and data so it's not allowed to flash hboot via fastboot.
You can flash recovery from here:
http://www.clockworkmod.com/rommanager/
download proper recovery.img and flash it via fastboot. You have to type the path correctly to the space where you stored it, ie:
fastboot flash recovery c:\recovery.img
Then go here:
http://forum.xda-developers.com/showthread.php?t=809328
find and flash a rom of your choice. These are custom roms and are flashable from recovery (install zip from sd card command).
Click to expand...
Click to collapse
ok thats straight forward, and i followed it but why does it keep saying ,remote not allowed failed!
i have phone in usb displaying fastboot usb is highlighted!
users\kammy\appdata\local\android\android-sdk\platform-tools\fastboot
i dont get it,why the error
thanks very much
I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...
desire
nlooooo said:
I didn't know what's xtc clip, now I found out and I'm sure that something failed in that process cause have s-off on your device but you actually don't have it cause you can't run fastboot commands. Sorry...
Click to expand...
Click to collapse
ok thanks everyone for help, but i will be back with results
kammy6000 said:
ok thanks everyone for help, but i will be back with results
Click to expand...
Click to collapse
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks
kammy6000 said:
ok so now i have recovery clockwork installed i think ,i am able to install a custom rom , cyanogen , then it just crashes at the
load screen the screen goes all fuzzy or it looks like its loading but not going through the whole process
is this lcd,amoled issue?
or something else i am really close but what is stopping it loading
thanks
Click to expand...
Click to collapse
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me
kammy6000 said:
ok now i have alpharev hboot cm7, but all roms just crash is there specific roms only please help me
Click to expand...
Click to collapse
Here you go, just search the thread, for every rom it is written if it's cm7 hboot compatible.
http://forum.xda-developers.com/showthread.php?t=809328
My daughter gave me her HTC Desire & told me she thought 'something wasn't right' with it
The handset is locked to Three, & as far as I know was running fine until this problem.
Apparently, she had 'just deleted some apps' & it sounds like somehow it ended up in a boot loop. She passed it to a 'friend' who 'knows about phones & stuff' & now it goes to a black screen with a triangle in each corner at switch on. She says she thinks her 'friend' tried to reinstall Android, but I'm guessing it didn't go to plan I've had a trawl through google, & the only thing I've found which gives me any sort of output is
C:\Android>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x26A12
(bootloader) TAG:hero panel = 0x3
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is H3G__001
(bootloader) setting->cid::H3G__001
(bootloader) serial number: SH0BAPL06571
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =420
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.11.05.14 androidboot.cid=H
(bootloader) 3G__001 androidboot.carrier=COMMON androidboot.mid=PB9920000
(bootloader) androidboot.keycaps=qwerty androidboot.mode=normal androidb
(bootloader) oot.serialno=SH0BAPL06571 androidboot.bootloader=6.93.1002 n
(bootloader) o_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:576595 msec
FAILED (status read failed (Too many links))
finished. total time: 6.727s
Click to expand...
Click to collapse
Any help greatly appreciated.
check bortaks troubleshooting guide in my sig, answers for u problem is there
Sent from my HTC Desire
problems
3c3adu said:
problems
Click to expand...
Click to collapse
wtf?
jmcclue said:
check bortaks troubleshooting guide in my sig, answers for u problem is there
Sent from my HTC Desire
Click to expand...
Click to collapse
Thanks for the reply jmcclue. I had a good read through all the links in your sig.
I'm not sure exactly what you were suggesting may be the solution to the problem, but I tried extracting rom.zip from RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed.exe, renaming it to PB99IMG.zip & then tried updating via fastboot, but I got the following
C:\Android>fastboot update PB99IMG.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
error: failed to access zipdata in '╣ü┼02ıa6åfïlAþQ=┘qµ┘mìl♣2
çn►5╗ÿM█l(M,ÐøXó7▒Do÷XuþÜ¢¿IG♦ÃB¯òÇ[Öù☺Rò░wNy/Ó▓└⌂↔úÐKá↔■Ä▒8þo├¬ÊAÈXö7iF ê┌'³EQ^Ó/¸¼ðï0║å║Î☺ÞP×WWôìªçB
ƒþf╚û©ÜÞàõ»åÞ_‗*‗↓ȯ┘µÇU*+¥!Ûe↑q(ä⌂╬¾┴PyÁ3ML¨═◄R:
àı├XЦ▼N'
Click to expand...
Click to collapse
Is this what you where suggesting I do? If so, what have I done wrong?
Just download and run 2.3 ruu.
Sent from my HTC Desire using Flashes and Thunders
dreamonn said:
androidboot.bootloader=6.93.1002
Click to expand...
Click to collapse
Thats a alpharev hboot. You will have to downgrade hboot first before running 2.3 RUU. Only run 2.3 RUU.
Chapter 4 of Bortaks troubleshooting thread is relevant for you. Before the RUU do downgrade hboot. Its in my signature.Go there
handy5876 said:
Thats a alpharev hboot. You will have to downgrade hboot first before running 2.3 RUU. Only run 2.3 RUU.
Chapter 4 of Bortaks troubleshooting thread is relevant for you. Before the RUU do downgrade hboot. Its in my signature.Go there
Click to expand...
Click to collapse
Thanks handy5876
If I pull the usb lead after I hear the phone connect, it goes from the black screen with a triangle in each corner to what looks like a fastboot screen with the following info
Code:
AlphaRev Unlock
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.9999
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Aug 10 2010, 17:52:18
RUU
I had a read through [4] of Bortaks guide. As you said to downgrade hboot I downloaded the bravo_downgrade.img from AlphaRev & also Android Flasher 2.2.0.5. When I run Android flasher with the phone showing the black screen with triangles, I click the 'Bootloader' button & browse to the bravo_downgrade.img, but when I click 'Flash' I get an error that says
Code:
error: device not found
& a pop up window which says
Code:
Error, your phone is not plugged in or drivers aren't installed
. If I check the 'I'm already in fastboot' box & repeat the above, Android Flasher just says 'Please wait while your phone is flashed.' but nothing happens.
I can issue a
Code:
fastboot oem boot
from a command window & get a response from the phone so I'm guessing there are drivers installed, & the fact that it replies to a fastboot command means I'm in fastboot so I'm a little confused.
Any ideas what I'm doing wrong?
Run 2.3 ruu from bootloader/fastboot.
Sent from my HTC Desire using Flashes and Thunders
dreamonn said:
Code:
AlphaRev Unlock
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.9999
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Aug 10 2010, 17:52:18
RUU
Click to expand...
Click to collapse
Do as nlooooo says. Your bootloader is saying Alpharev Unlock. That means it has been downgraded and safe to run the 2.3 RUU.
nlooooo said:
Run 2.3 ruu from bootloader/fastboot.
Sent from my HTC Desire using Flashes and Thunders
Click to expand...
Click to collapse
Hi nlooooo
Can you just confirm what you mean - do you mean to run the ruu.exe or push the ruu from fastboot? If you mean to push the ruu from fastboot, what commands do I issue?
Just run it from PC, you can do that with phone in both bootloader or fastboot.
Sent from my HTC Desire using Flashes and Thunders
Success!!
Successfully flashed & now back up & running.
Thanks for all you help
:thumbup:
Sent from my HTC Desire using Flashes and Thunders
nj!
Hello,
I have Desire Z. My cousin gave me to fix it. When I start to power on phone stucks on HTC Logo. When I try to run recovery I got phone with green arrows on display (some kind of download mode) and after 10 secs screen goes black and phone vibrates 5 times. How can I fix it?
http://forum.xda-developers.com/showthread.php?p=44244909
In here you will find necessary links and instruction on how to post in this forum to get appropriate help, once you read through the appropriate threads you will know how to fix it or know how/where best to post, let me know if you're still confused
Sent from my Nexus 7 using Tapatalk 2
I didn't find anything for me. I tried to update via .img file but it stucks on BOOTLOADER - Updating.
In particular I meant to give as much information as possible about your phone, there is clear instruction on how/where/what to post. I'm not trying to be a jerk here but without getting as much info as possible I or anyone else can't help much.
So if you can write down all info from bootloader, describe what you have tried in detail, read a few of the many many threads about bricked phones and post question in a relevant thread rather than creating yet another, when all solar questions are in similar threads there is far less for others to sift through to find answers to their dilemmas
There is a thread specifically devoted to bricked phones in that link, how to troubleshoot and how to ask for help
I don't mind helping at all, rather enjoy it, but I need info and you also should show you are researching and trying rather than just saying help
Sent from my Nexus 4 using Tapatalk 2
I see your point. I searched for solution but most of guides shows how to unbrick ROOTed phone. Mine is S-ON so it's not rooted.
Bootloader:
VISION PVT SHIP S-ON
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.03_M
eMMC-BOOT
Apr 11 2011, 23:36:27
HBOOT
Unfortunately your not finding these guides because there is very little you can do at this point with an unrooted phone. You'll need to go to HTCs website and download the latest ruu, there is full instructions there how to run it. You will also need to get fastboot installed on your pc
Sent from my Nexus 4 using Tapatalk 2
But on Polish HTC website I can't download any RUU. HTC has stopped to publish RUU's for HTC's. I download this RUU: RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.3_Radio_12.56.60.25_26.10.04.03_M_release_224299_signed . I think it's lastest - I couldn't find anything newer.
Try here
http://www.androidruu.com/index.php?developer=Vision
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
Try here
http://www.androidruu.com/index.php?developer=Vision
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
As I said before - I got the newest RUU: RUU_Vision_Gingerbread_S_HTC_WWE_2.42.405.3_Radio_ 12.56.60.25_26.10.04.03_M_release_224299_signed . I extracted rom.zip , changed name into PC10IMG and copied it to root of my SDCARD. Update stucks on Bootloader - updating.
Try booting into ruu mode and flashing it that way
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
Try booting into ruu mode and flashing it that way
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
How can I boot into ruu mode? I tried to update via ruu when phone is in fastboot mode. Installation stucks on wait for bootloader.
Also I found something strange:
RUU is 2.42.405.3
and currently on phone I have 2.42.405.4 . I can't find this RUU.
When I'm trying to do "fastboot oem boot" I got:
C:\Android\Tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D0878FC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25202
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: SH19PRT01523
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =504
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.10.04.03_M androidboot
(bootloader) .cid=HTC__032 androidboot.batt_poweron=good_battery androidb
(bootloader) oot.carrier=HTC-EastEurope androidboot.mid=PC1011000 android
(bootloader) boot.keycaps=qwerty androidboot.mode=normal androidboot.seri
(bootloader) alno=SH19PRT01523 androidboot.bootloader=0.85.0013 zygote_on
(bootloader) eshot=off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:517509 msec
FAILED (status read failed (Too many links))
finished. total time: 8.148s
The .04 is the newest, see the link I sent. Being your not rooted and have all security flags on there is little you can do.
the command is
fastboot oem rebootRUU
fastboot flash update nameofupdate.zip
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
The .04 is the newest, see the link I sent. Being your not rooted and have all security flags on there is little you can do.
the command is
fastboot oem rebootRUU
fastboot flash update nameofupdate.zip
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I can't find .04 . I tried to search before I posted but my search wasn't successful. I found zip based od .04 but it is CustomROM. If I checked corrently .04 is OTA. So how should I update via RUU when there is no such file?
Let my ask one more question: is there is any way to use ADB on my phone? Reboot in ADB Mode or sth?
It looks like you're right there, that was never released as an ruu, but if my memory serves me correctly, without super CID you can only flash newer RUUs anyway, your phone won't take an update unless its newer, not older or even the same.
This means there is no newer ruu and less likely a chance to resurrect your phone.
adb is a bridge between phone and PC and is to be used when booted to os, or custom recovery. Being you can't do either you can't use adb.
Try going to freenode irc #G2ROOT to get some real time help but I'm thinking this phone is helpless
Sent from my Nexus 4 using Tapatalk 2
Auto-information on this irc said that perm-root is achieved and the channel will be closed. U sure I will get help there?
BTW: Do u think that XTC-Clip can help me?
Fried mmc maybe, i had the same probleem with an unrooted Desire Z, if the phone is not older as 2 years contact HTC they will replace the Phone by a new one.
I have tried many things but nothing worked, I phoned to HTC and after 2 weeks i got a new Desire Z.