Hi,
I installed the TWRP recovery version 2.6.3.0 onto my phone just now after trying CWM with no success. The CWM recovery could not read my SD card while the TWRP has another error. When I try to install the ROM, I get an error message : Error executing updater binary in zip..........
Is there any way to fix this? Thanks!
What rom ? What version of CWM ?
Mr Hofs said:
What rom ? What version of CWM ?
Click to expand...
Click to collapse
I tried CWM 6.0.4.8 both with touch and without. Both failed to mount the SD card so switched to twrp 2.6.3.0 and I got updater binary errors with twrp
Flash Philz 5.15.9 and copy the rom. Then switch to twrp from audahadi, it's in the original dev section.
Didn't work either
Mr Hofs said:
Flash Philz 5.15.9 and copy the rom. Then switch to twrp from audahadi, it's in the original dev section.
Click to expand...
Click to collapse
Didn't work either anything else I can do?
Thanks a lot for your help, really appreciate it
Ah i mean flash philz 5.15, mount the sdcard and wait a few minutes. Then copy a rom to it. And flash the appropriate recovery.
Maybe a broken rom.zip file, which rom ?
Archives
Mr Hofs said:
Ah i mean flash philz 5.15, mount the sdcard and wait a few minutes. Then copy a rom to it. And flash the appropriate recovery.
Maybe a broken rom.zip file, which rom ?
Click to expand...
Click to collapse
Does it have to be version 5.15?
Right now, i can only see versions 6. something .something
Do you have any archives?
Depends....what rom ???
At least here you have 5.15
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img
Ah so stupid of me. Cyanogenmod Stable ROM, however I tried the Viper one as well. Was able to flash it, but probably was unable to boot due to outdated bootloader
Related
Hi Guys,
I got into a bit trouble with my Hongkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, when I was trying to copy the zip file using the adb push YOURROMZIP.zip /sdcard/ command, I got the no device found error. And my phone is stuck at HTC logo.
With the guidance of Thant, I have tried Clockworkmod 5.8.2.7 recovery and Philz recovery, but I got the same error when I tried to ADB side load rom in both recoverys.
Now I am totaly stuck. Does anyone know the boot.img in cyanogenmod stable rom contain, Kernal I assume? Is there anyway that I can flash the kernal of my old rom so I can at least get in Android?
My Hboot Screen
https://drive.google.com/file/d/0BwqQHN9e6x81bnBQTEQ0aUUyWFk/edit?usp=sharing
-----------------------
Problem solved, all the thanks go to Thant.
Flashed philz recovery 5.15.9, mount sd card, copy rom to sd card, flash again latest Philz and flash the rom.
---------------------
The photos are not available...also try in fastboot fastboot erase cache and try again to boot into recovery...just hold power button and volume -
And if command writing failed try another recovery and which hboot do you have?
Gesendet von meinem HTC One_M8 mit Tapatalk
mmp7 said:
Hi Guys,
I got into a bit trouble with my honkong version one x and hope someone can point me to the right direction.
I was trying to flash the cyanogenmod stable rom by following instructions provided on their website. I have unlocked my phone and have found that it's actually an s-off version as well.
The first step I took is to extract the boot.img from the installer zip and run fastboot flash boot boot.img from fastboot mode. This all went well. However, there is no way to get into recovery mode so now I have a phone that stuck in a screen with only HTC logo. Is there any way I can rectify this?
Many thanks In advance,
Ian
my fastboot screen
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to enter recovery from fastboot
https://drive.google.com/file/d/0Bwq...it?usp=sharing
when I try to flash clockworkmod, I got an error, command write failed, unknown error.
Click to expand...
Click to collapse
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Thant said:
You must to flash custom recovery TWRP 2.7 or from CM11 one x forum inside have recovery and then to go in recovery and flash the rom
Second when you connect the phon try command fastboot devices and see if your phone is attachen if you dont see your phone install the google drivers from one thread from @and313 again here in the thread and then try again many people report problem with fastboot after flashing the boot.img from CM11 and on all of them is problem with the drivers
Click to expand...
Click to collapse
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
mmp7 said:
I have managed to flashed CM 11 recovery. tried TWRP 2.7 but touch screen doesn't work.
Now the problem that I am facing is to copy the zip file to SD card.
Tried using the fastboot push command but return the error device is not found. My Hboot version is 1.73.
Do you mind posing a link to the driver? I am using the latest driver in HTC sync manager.
Click to expand...
Click to collapse
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Thant said:
Try to flash latest Philz recovery it is for kitkat rom and tuch work and maybe in your case the SD card mounting. If not try to flash 5.15.9 there sd card mounting work 100% copy the rom and flash again latest fil and flash the CM11 rom
Click to expand...
Click to collapse
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
mmp7 said:
Hi Thant, will you be able to point me to the Google driver? I have flashed the latest Philz recovery but still couldn't side load ROM. When I check the device manager, the android phone is not recognized.
Click to expand...
Click to collapse
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Thant said:
you flash the recovery with command fastboot flash recovery recovery.img? and this finish with success? What you see when you write fastboot devices?
This is the thread
Click to expand...
Click to collapse
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
mmp7 said:
The flash was successful and I have entered the PhilZ recovery. Very nice interface.
Now back to fastboot, the screen shows FASTBOOT USB, which means it connected but when I run fastboot devices I got nothing, yet I can still flash any recovery I like. I am wondering if I can download the HongKong rom recovery anywhere so I can get into android and repeat the whole process.
Click to expand...
Click to collapse
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Thant said:
download philz recovery 5.15.9 and flash it after this mount sd card copy your rom to sd card after this flash again latest Philz and flash the rom
Click to expand...
Click to collapse
Thanks a bunch. It worked!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I'm having some trouble with installing a new recovery. I want to have TWRP because I want to install a ROM that requires it. At the moment I have some old CWM but when I flash TWRP and reboot into recovery I still get into CWM.
So how do I replace CWM or at least boot into TWRP?
elementzero23 said:
I'm having some trouble with installing a new recovery. I want to have TWRP because I want to install a ROM that requires it. At the moment I have some old CWM but when I flash TWRP and reboot into recovery I still get into CWM.
So how do I replace CWM or at least boot into TWRP?
Click to expand...
Click to collapse
What rom requires u to have twrp recovery? How r you trying to flash it?
jmcclue said:
What rom requires u to have twrp recovery? How r you trying to flash it?
Click to expand...
Click to collapse
This one
I tried flashing it via fastboot and via my old recovery ("flash zip from sd card")
elementzero23 said:
This one
I tried flashing it via fastboot and via my old recovery ("flash zip from sd card")
Click to expand...
Click to collapse
Try 4ext recovery, in my opinion i think its better. Also u cant flash recovery "flash zip from sdcard" u have to either use fastboot command
fastboot flash recovery recovery.img
Or via PB99IMG method or using the 4ext app but u can only use the app once ur phone is booted.
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
eslamhassan said:
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
Click to expand...
Click to collapse
Are you using the recovery from the CM12 Lollipop thread? Try flashing a different recovery.
FoxyDrew
FoxyDrew said:
Are you using the recovery from the CM12 Lollipop thread? Try flashing a different recovery.
Click to expand...
Click to collapse
im try all recovery found in xda dev but no one can install another rom im tired about this proplem please solve my proplem you can upload any rom work and i can install it thanks
Do these… just install the CWM recovery… ..then find the backup on some threads which is the same as your phone variant then restore it..
eslamhassan said:
hy guys im insall lolipop yasterday on my device then i want back to backup india or anther cm 11 but all recovery cant insall any rom and write (error executing updater binary in zip ) please any one help me thanks all
Click to expand...
Click to collapse
Did you factory restore / Wipe data/cache
before restoring?
-If you have not I recommend doing so now.
-Now try flashing a different recovery in Fastboot USB mode; such as Philz CWM.
-Then try to install CM11.
-Now put your backup back where it needs to be:
Philz CWM: /data/media/0/clockworkmod/backup
Original CWM 6.0.5.1: /data/media/clockworkmod/backup/
If that didnt work then try from step one with factory restore in recovery mode again but now instead of flashing any recovery flash the one specifically from the CM11 Official thread then continue with your restore.
This is because it is different from the one in the actual CWM 6.0.4.8 thread.
The one from CM11 official thread is 6.0.5.1 and fixes the black recovery screen issue people have when using the one from the 6.0.4.8 thread or when flashing Philz / TWRP for the first time.
After flashing the one from CM11 Official it (allows?) the device to flash other recoveries properly.
Weird bug, I know.
Sent from my 710C using XDA Free mobile app
Redmi 1s.. v45 rooted.
I have TWRP 2.8.0 recovery. I can enter in the recovery. But...
1) can't install any zip(tried to install zip of stock recovery and cwm. It shows successful but again boots in twrp recovery)
2) can't backup(it shows backup is successful but no folder or file is created as a backup)
3)tried fixing root permission... But it takes forever to complete the process)
If this can be fixed plz help...... Other thing i did is...
I tried to flash rom in fastboot...
Using Miflash.... An error is displayed.... Can't flash the rom too.
Thanks
There's some problem with the recovery i guess. Try using fastboot recovery to flash the latest version and an rom
Sent from my XT1033 using XDA Free mobile app
dtechgeek said:
Redmi 1s.. v45 rooted.
I have TWRP 2.8.0 recovery. I can enter in the recovery. But...
why dont u try with this tool http://forum.xda-developers.com/redmi-1s/orig-development/win-xiaomitool-t2924789
to flash recovery or rom
Q. what error did u get from miflash when u try to flash from flashboot?
Click to expand...
Click to collapse
Solved
I installed CWM recovery via fastboot. Now everything is fine.:angel:
But in TWRP I used to see "simulating actions" while performing backup or installing zips.
Didn't get that.
Cwm touch recovery
Everytime im tryig to backup rom , via cwm , it says cant mount backup path.. I installed stock recovery updating via updater then formatted my internal sd , flashed cwm again,, tried back up again didnt work.. Any help?
I had problems with Custom Roms in CWM but for me TWRP worked well. But you can try Philz recovery.
http://forum.xda-developers.com/redmi-1s/orig-development/recovery-cwm-philz-touch-t2845710
Hope this will solve your problem.
Solution
I had exactly the same problem.
It turned out that the problem is in the TWRP settings. Uncheck the Simulate bla...bla...bla...
I'm currently using cm12.1 ROM but the rom has some bugs and now i want to install miui 6. So i download the rom and try to flash it and do all the required procedure but while flashing its showing no md5 file is found and the installation process failed. I tried i t using twrp recovery 2,3 times but every time it failed. Need some help please
asadhsn93 said:
I'm currently using cm12.1 ROM but the rom has some bugs and now i want to install miui 6. So i download the rom and try to flash it and do all the required procedure but while flashing its showing no md5 file is found and the installation process failed. I tried i t using twrp recovery 2,3 times but every time it failed. Need some help please
Click to expand...
Click to collapse
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
khairulez said:
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
Click to expand...
Click to collapse
Is it necessary to use philz recovery. Can't it be possible through twrp?
asadhsn93 said:
Is it necessary to use philz recovery. Can't it be possible through twrp?
Click to expand...
Click to collapse
Yep..i'm facing this situation,use twrp but it's not working then after i use philz it work.
khairulez said:
First,put rom .zip into internal storage.use philz recovery v6.55.0 and do clean install before flash rom.
Click to expand...
Click to collapse
khairulez said:
Yep..i'm facing this situation,use twrp but it's not working then after i use philz it work.
Click to expand...
Click to collapse
I have been using twrp recovery so now how will i switch to twrp recovery. Whats the procedure
asadhsn93 said:
I have been using twrp recovery so now how will i switch to twrp recovery. Whats the procedure
Click to expand...
Click to collapse
you can flash twrp .img via fastboot or Rashr flash tool app (free download at playstore).