[Q] New to custom roms, running PA rom - Oppo Find 7 and 7a

New to running custom roms on phone, usually I just stick to stock but after a week of running COS I was about ready to return my phone. Found paranoid android, read the thread and got it running on my phone. I have to say it completely changed my opinion on the phone and I am loving the experience so far. 2 things though
1) Proximity sensor not working when in a call, not THAT big of a deal but I didn't know if it had already been reported for this rom yet as I read some of the other roms were experiencing a similar issue.
2) This maybe just me not being able to find stuff but is there a way to keep the notification/status bar from going into auto-hide? Although having full screen is nice, I am so used to seeing the status bar that I would like the option to display it.
Other than those two issues, I am loving this rom, even donated to the dev just because it turned a mediocre/almost bad experience into a positive one.
Running pa_find7-4.4-20140626 with micro mod gapps
Thanks for the help!

On PA, there are multiple settings to change notification and what not. As far as proximity sensor, it may be wise to wipe and reflash. I've installed PA on mine and don't remember having an issue with it at all.
One hint, most these apps automatically turn gesture while screen off. If you carry phone in pocket, it will turn torch on and start music without you ever touching the phone. This goes for most of the roms though!
best of luck
lambda231 said:
New to running custom roms on phone, usually I just stick to stock but after a week of running COS I was about ready to return my phone. Found paranoid android, read the thread and got it running on my phone. I have to say it completely changed my opinion on the phone and I am loving the experience so far. 2 things though
1) Proximity sensor not working when in a call, not THAT big of a deal but I didn't know if it had already been reported for this rom yet as I read some of the other roms were experiencing a similar issue.
2) This maybe just me not being able to find stuff but is there a way to keep the notification/status bar from going into auto-hide? Although having full screen is nice, I am so used to seeing the status bar that I would like the option to display it.
Other than those two issues, I am loving this rom, even donated to the dev just because it turned a mediocre/almost bad experience into a positive one.
Running pa_find7-4.4-20140626 with micro mod gapps
Thanks for the help!
Click to expand...
Click to collapse

Related

HELP! Phone doesn't wake up

My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
rossle12 said:
My phone goes to sleep
and does NOT wake up, the bottom row of buttons and keyboard both light up if I open them or press them.
Help please!
Click to expand...
Click to collapse
Stock ROM or custom? Any overclocking?
The phone powers up if you soft reset, correct?
Well, I found out it was a small problem with the rom.
It was a custom rom, and I just installed a different one and it works flawlessly.
With the other one, the light sensor did not work either.
Also, I dropped my phone the other day, and a really small spring fell out.
And the back plain on my screen is loose and opens up easily..
Which ROM?
I hate to hijack this thread but i am having the exact same problem. Basically when i put my phone to sleep its hit or mess as to if it will wake. It seems to have started when i flashed Energy ROM. It was terrible after that, so I switched back to the stock ROM available from the HTC website and all seemed well at first. Now its back to hit or miss.
I cant really rule out a hardware issue such as a broken sensor or something because I'm not sure how the mechanics of it work. When i push the power button on top the phone wakes but not the screen I know this because the 4 lights on the bottom light up and the keyboard as well. I can hit the button repeatedly but it doesnt help. At other times it works flawlessly, but usually does not.
Can anyone give me a suggestion as to what it could be, or a way to rule out a hardware issue?
Exactly my problem!
It was perfectly fine for the first day or so before it started crapping out again..
Can someone please help us with this problem?
It's mind consuming and it's making me worry.
Until TP3 is out, I won't get a new phone ):
Well, the problem is discussed in great detail on the internet, but no one can give a definitive answer. ..
I've been a touch pro 2 user for exactly 3 days... My new HD2 from T-Mobile is in the mail... This is a un acceptable flaw with no real solutiion... Good Luck TP2 users....
Good luck to you.
I've had mine for over two years and it was flawless
Just one recent drop determined everything
Although I Must say, it was one hell of a durable phone
Yea, dont get me wrong. I really like the phone. Thats why I'm getting the HD2. Great OS and big beautiful screen. I'm gonna miss the slide out keyboard but I think thats what breaks these phones.
I'm excited that there's the possibility of running Windows Mobile 7 on it.
rossle12 said:
Can someone please help us with this problem?
Click to expand...
Click to collapse
I'd like to try to help. But you never answered my question of what ROM you are on (and which one you tried previously).
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
djowen6565 said:
I've determined my problem is 100% hardware related. If I open my keyboard and then grab the screen and tweak it while pressing the power button it comes onn 100% of the time. Sux, but at least I know the cause now
Click to expand...
Click to collapse
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
HELP: Same problem Phone not waking up
Hi saw this thread and was wondering if anyone can help me.
I have an HTC Touch Pro 2 for some month now...
Using the following details:
OS Version: 5.2.21887 (21887.5.0.86)
ROM Version: 2.07..401.1 (80303) WWE
ROM date: 02/04/10
Radio ver: 4.49.25.91
stock ROM basically...
THe issue is that the phone doesn't wake or when using it just freezes/hangs.
Not much software/apps installed... and memory is good as well.
I just don't know what's going on...
Help please.
Thanks
rossle12 said:
Every once in a while my phone would turn on and I wouldn't know why
But yeah, I think it is hardware related.
I previously used Energy then went to Jacko's.
Both were perfectly fine, just the upsetting sleep function and light sensor would keep the phone off.
Click to expand...
Click to collapse
I'd agree with the notion that its likely hardware related. I've flashed maybe 10 different builds of Energy over the last 7 months or so, and never once had and issue with the SOD (sleep of death) that I can recall. A bad flash can sometimes happen. But since you flashed another reputable ROM (Jackos), that somewhat eliminates the possibility that a bad flash is the culprit.
You can start from scratch, by running Task29 to format the ROM area of the phone's memory, and reflash the ROM. But this would be just to eliminate the possibility of a bad ROM flash. My gut says that you won't see any different results.
Running the phone "clean" for a while (to see if you still have the SOD) without any software installed or any other modifications will eliminate the possibility that any software or mods are responsible for the issue.
are you sure its hardware related? because my phone started doing this yesterday too...I had an energy rom from october, and it was really buggy. I am only able to keep my phone from sleeping when it is plugged in to some power, so i flashed the newest energy rom and still having the same problem...wont wake up from sleep
EDIT:
I dont see how this can be hardware related because everytime i soft-reset, the screen works again. this problem only happens when the device goes to sleep...
Any overclocking?
As I already mentioned, I never had any SODs on Energy that I can recall, except when using OCT (OverClocking Tool).
I have done no overclocking...I just flashed the newest energy rom like 15min ago...is there anything else I can do or check? it looks like the phone works still, just no backlight...
After flashing the ROM, maybe try running it "clean" for a day or two, don't install any software or do any mods, reg edits, etc. If you still have problems with the phone waking up with a new ROM, and no other software or other mods, than it may indicate a hardware problem.
And be sure to run Task29 before you flash the new ROM, if you don't already do that.
You guys should read the following thread:
http://forum.xda-developers.com/showthread.php?t=648134
You're not the only ones (by any means) with the SOD issue. But it isn't at all clear what causes the issue. Lots of different theories in that thread about various software or ROMs, with no clear solution.
Lots of conflicting info, but some comments on the thread suggest (as I mentioned) that Task29 may help (certainly can't hurt).
moto2000 said:
are you sure its hardware related?
Click to expand...
Click to collapse
Nope, definitely not sure, especially after reading the thread linked above. But as I suggested before, Task 29, try a different ROM, and run it clean with no software or mods, and start eliminating the variables.

[Q] Vibrate/Haptic Feedback Randomly Stops Working (Evo 4G)

I am having a problem where all vibration/haptic feedback will just randomly stop working completely. Then a few hours (and sometimes days) later it will randomly start working again. It will keep working again for a few hours or maybe days, and then randomly stop again. There seems to be no pattern to it.
I have no idea what is causing this. Has anyone else experienced this, or does anyone have any idea how to fix it?
This is extremely frustrating as I am someone who never uses the ringer; I just always have my phone on vibrate.
I'm running the latest stable release of CM 7.1 for the Evo 4G, but I had this happen before on stock Sense as well.
mredmond2012 said:
I am having a problem where all vibration/haptic feedback will just randomly stop working completely. Then a few hours (and sometimes days) later it will randomly start working again. It will keep working again for a few hours or maybe days, and then randomly stop again. There seems to be no pattern to it.
I have no idea what is causing this. Has anyone else experienced this, or does anyone have any idea how to fix it?
This is extremely frustrating as I am someone who never uses the ringer; I just always have my phone on vibrate.
I'm running the latest stable release of CM 7.1 for the Evo 4G, but I had this happen before on stock Sense as well.
Click to expand...
Click to collapse
I am having this same issue as well. It must be software related because the vibrate function works just fine when the phone rings. I am running CM 7.1 stable on an Evo 4G. I noticed the issue as well on CM 7.0.3.1 or whatever the latest stable build was on CM.
Does the phone ever always (or never) vibrate under a certain circumstance? i.e. incoming text, email, incoming/outgoing call, typing, etc.? Also, do you have any toggle widgets that could affect vibrate/ringer status?
I ask this because, and this may sound silly, it may be that you are modifying settings unknowingly. I've had that happen where I have my hands in my pockets and next thing I know I've accidentally got my Facebook up and running and typed half a book in the status field.
Again, I know that sounds silly but I ask because it's happened to me before.
Concordium said:
Does the phone ever always (or never) vibrate under a certain circumstance? i.e. incoming text, email, incoming/outgoing call, typing, etc.? Also, do you have any toggle widgets that could affect vibrate/ringer status?
I ask this because, and this may sound silly, it may be that you are modifying settings unknowingly.
Click to expand...
Click to collapse
That's fine, its an important clarification to make. But no, I am absolutely sure I have not changed any of the options unknowingly. As I said in the OP, ALL vibration/haptic feedback will cease to function entirely. I've often had it happen that in the middle of typing something, the haptic feedback for the keyboard will just go away. Immediately after this if I check the soft key buttons or test the vibration for notifications, none of these will produce any sort of vibration response either. Then randomly a few minutes, hours, or days later, all haptic feedback will just return. Its been an extremely strange and frustrating issue.
4nth0ny said:
It must be software related because the vibrate function works just fine when the phone rings. I am running CM 7.1 stable on an Evo 4G. I noticed the issue as well on CM 7.0.3.1 or whatever the latest stable build was on CM.
Click to expand...
Click to collapse
For me, when the vibration stops working, it stops working for everything, even when the phone rings. But that's what I can't figure out: if it is a software or hardware related issue. I was having this problem on stock Sense, and I figured if it was software related, perhaps flashing a new ROM (in my case, CM7), would fix it. However it hasn't, so I'm beginning to think if it is indeed a software issue, it must be a bug somewhere very deep within the code, otherwise it has to be a hardware issue. But if its a hardware issue, I can't figure out why it would randomly stop/start working like it does, and the thing is, most (75%) of the time, it is working. Its just the other 25% that annoys the hell out of me. That's why I thought I'd ask and see if anyone else had experienced it or found any solutions.
Its a CM7 thing I've noticed it on Xplod, Decks, and CM7 I don't really mind it cuz my ringers are loud as hell but yeah its pretty weird :shrugs:
Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
infamousteeboy said:
Its a CM7 thing...Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
Click to expand...
Click to collapse
Well like I said before, I was having this problem on my stock Sense ROM.....
infamousteeboy said:
Its a CM7 thing I've noticed it on Xplod, Decks, and CM7 I don't really mind it cuz my ringers are loud as hell but yeah its pretty weird :shrugs:
Usually AOSP ROMs for some reason have that problem cuz on sense ROMs it never happens
Click to expand...
Click to collapse
I've never had that problem on CM and I've been using many different versions of it for a long time. I don't know if I am lucky or what but people complain about a lot of issues that are claimed to be CM issues....yet I've never had a single one of them.
Concordium said:
I've never had that problem on CM and I've been using many different versions of it for a long time. I don't know if I am lucky or what but people complain about a lot of issues that are claimed to be CM issues....yet I've never had a single one of them.
Click to expand...
Click to collapse
Well I kinda had the same problem that he's run into on CM but I figured it out but I figured since he's had the problem on a sense ROM also then maybe its not the ROM but I jus went into everything that had the option to vibrate and turned them all on cuz I've flashed a couple ROMs and the vibration would be off I try not complain about anything about any ROM its a person hard work they've done for free I try to figure things out on my own as much as possible before I create a thread not bad talkin the OP but jus sayin you know?
I don't think that it's rom related. I've been having issues with my haptic feedback since I got the phone, even before rooting it. I think it's just a crappy vibrator. (If there's a better name than "vibrator", please someone tell me.)
I had vibration problems on my first Evo as well, it was never rooted. My second Evo was a HW004 and the haptic feedback was perfect - it was softer instead of the shock-like haptic feedback I've experienced with my 003s. My current and third Evo is also a 003, so I assumed it had something to do with the motor used in 003s.
I've just turned haptic feedback off. I thought I'd miss it, but I've gotten used to it. I still use have my phone set to vibrate for notifications and calls and I've seen fewer issues.
If you think you can go without, I'd suggest turning haptic feedback off. Otherwise, unroot and take it into Sprint. You may have more luck calling, because if you can't replicate the issue in front of them then they can't do much.
Sent from my Evo + MIUI using Tapatalk!
plainjane said:
I don't think that it's rom related. I've been having issues with my haptic feedback since I got the phone, even before rooting it...
...Otherwise, unroot and take it into Sprint. You may have more luck calling, because if you can't replicate the issue in front of them then they can't do much.
Click to expand...
Click to collapse
Yeah, its definitely not ROM related...I don't know if people aren't reading the posts, but I've said several times that this occasionally happened on stock Sense, both before and after rooting.
Dang. I didn't want to have to bring it in to get it fixed, but I guess that's what I'm gonna have to do if its a hardware problem...I was really hoping it was software related or if someone would know of a way to fix it so that I could avoid dealing with warranty services...I got suckered into the Best Buy warranty, and it turns out that even though they either give you a new or refurbished model, they make you turn yours in and wait 5-7 days for the replacement to come in instead of ordering the replacement and then doing a trade with you when it comes in. I already experienced it once before when my USB port broke... :/
Not being able to replicate the issue is my main concern since sometimes it works and sometimes it doesn't. Trying to get it to stop working at a time when I can actually run out to the store is gonna be a pain...And I really don't want to waste a trip to the Best Buy store only to have it start working again with me trying to tell the GeekSquad Agent, "I promise, I promise! It was broken just 5 minutes ago!!" I can't imagine how many of those they have to deal with....

[Q] "Phantom Touch Input"

PLEASE SEE BOTTOM OF OP FOR UPDATES
-----
Greetings all,
[Backstory]
I've been flashing ROMs for about a year now. I started off with Virtuous Team Gingerbread and the Sense 3.x ROMS. I had no issues.
Then I moved to CM7, and MIUI, also on Gingerbread. No problems.
I've been using the CM9/CM10 ROMs since they appeared for the Incredible 2, from AOKP and Aeroevan, respectively.
Here is where the problems start.
[Problem]
On ICS and JB ROMs, I get what I have dubbed (there is probably a better name for it) "Phantom Touch Input".
At first I thought this was caused by normal bugs and glitches in the ROM. I did my best to deal with it. Usually a simple lock/unlock would solve the issue, temporarily.
So what would happen? Without touching the screen, I would get the long press menu to show up, and then the screen and capacitive buttons would freeze. Or the screen would start to slowly half scroll to the side, and again, freeze.
The most annoying part is when I am typing on the phone. I have tried other keyboards, be it from the MIUIv4, or the default keyboards of 4.0.x, 4.1, or 4.2. All the sudden random keys are pressed, and continue to be pressed, even when my fingers are nowhere near the screen.
However, no one else seems to have this issue, so it looks like I am the lone wolf here with this problem.
Can anyone provide insight? A possible fix? Or am I forced to deal with this on all 4.x ROMs?
---
UPDATE 1: Issues also occurred on CM7.2, so I may be facing a hardware issue.
UPDATE 2: Issues occurred in 4ext Touch. Looking around on YouTube, others (Incredible S users) have similar issues.
Nearly confirmed as a hardware issue.
Check Page 2 for video links.
[::AP::] said:
Greetings all,
[Backstory]
I've been flashing ROMs for about a year now. I started off with Virtuous Team Gingerbread and the Sense 3.x ROMS. I had no issues.
Then I moved to CM7, and MIUI, also on Gingerbread. No problems.
I've been using the CM9/CM10 ROMs since they appeared for the Incredible 2, from AOKP and Aeroevan, respectively.
Here is where the problems start.
[Problem]
On ICS and JB ROMs, I get what I have dubbed (there is probably a better name for it) "Phantom Touch Input".
At first I thought this was caused by normal bugs and glitches in the ROM. I did my best to deal with it. Usually a simple lock/unlock would solve the issue, temporarily.
So what would happen? Without touching the screen, I would get the long press menu to show up, and then the screen and capacitive buttons would freeze. Or the screen would start to slowly half scroll to the side, and again, freeze.
The most annoying part is when I am typing on the phone. I have tried other keyboards, be it from the MIUIv4, or the default keyboards of 4.0.x, 4.1, or 4.2. All the sudden random keys are pressed, and continue to be pressed, even when my fingers are nowhere near the screen.
However, no one else seems to have this issue, so it looks like I am the lone wolf here with this problem.
Can anyone provide insight? A possible fix? Or am I forced to deal with this on all 4.x ROMs?
Click to expand...
Click to collapse
Not exactly sure, I would say its hardware if it happens on all the roms. Have you went back to CM7 or MIUI since this problem started? I would revert back to one of them and test for a couple of days to see if the problem continues. If the problem is only active in ICS or JB then someone else will have to give you a hand on a resolution.
ThePhantom97 said:
Not exactly sure, I would say its hardware if it happens on all the roms. Have you went back to CM7 or MIUI since this problem started? I would revert back to one of them and test for a couple of days to see if the problem continues. If the problem is only active in ICS or JB then someone else will have to give you a hand on a resolution.
Click to expand...
Click to collapse
Ok will do when I have the chance.
Thanks for the speedy reply.
But let's say it is a hardware issue...
Do I unroot/restore/whatever and bring it back to Verizon?
Thanks.
[::AP::] said:
Ok will do when I have the chance.
Thanks for the speedy reply.
But let's say it is a hardware issue...
Do I unroot/restore/whatever and bring it back to Verizon?
Thanks.
Click to expand...
Click to collapse
Yes if the phone is still under warranty
I'm so fresh you can suck my nits...
Flashed CM 7.2
My home button didn't work, but that doesn't really matter.
I still experienced the same issues.
On a side note, wow CM7.2/Gingerbread is smooth....damn kernel. But stock 2.3.x is so ugly
Anyways, it seems like I should just "start clean".
I'm not sure what that entails - not just a full wipe...something more...tips?
[::AP::] said:
Flashed CM 7.2
My home button didn't work, but that doesn't really matter.
I still experienced the same issues.
On a side note, wow CM7.2/Gingerbread is smooth....damn kernel. But stock 2.3.x is so ugly
Anyways, it seems like I should just "start clean".
I'm not sure what that entails - not just a full wipe...something more...tips?
Click to expand...
Click to collapse
I use 4ext recovery myself, and I do a "full wipe" by format all partitions/factory data reset, then I see a lot of people also say wipe cache and dalvik so I throw that in as well, it don't take long but just in case a factory reset don't get them I just do it...lol. Hope that helps, and that may clear up some bugs with ICS and JB roms if you weren't doing that before. Just make sure you do a backup before wiping everything. Wouldn't want you to be without a phone if some process hiccups.
Thanks for the info.
Should I do anything with my SD card? It shouldn't affect ROM performance, but a wipe wouldn't be a bad idea, yes?
[::AP::] said:
Thanks for the info.
Should I do anything with my SD card? It shouldn't affect ROM performance, but a wipe wouldn't be a bad idea, yes?
Click to expand...
Click to collapse
I doubt that the SD card would affect the performance, but as long as you have backups of everything you can do as you please, backup backup backup. You don't want to lose everything, trust me I have seen bad things happen to guys that don't backup, and I have learned from experience as well.
Right right I know.
I'll try 4ext on a fresh ROM and see how things go.
Not a good idea to flash the touch version of 4ext in light of my issues.
Did a Nandroid, hit back, then screen input froze. The on-screen time is updating, but are the capacitive buttons are lit up but do not respond/give haptic feedback, let alone the touch screen itself. Power button just moves to the power menu, where I again cannot select anything.
Pulling battery :/
This is why I will never (want to) purchase a phone without a removable battery.
So looks like my issue isn't software related. (This issue can in no way be software related [or even caused by], right?)
I've had the phone for over a year...but I guess I'll try with Verizon.
*sigh*
What a pain.
Looks like I am certainly not alone.
(Better video) http://www.youtube.com/watch?v=25CaiveQoQg
(Similar) http://www.youtube.com/watch?v=kANVkc-Sk74&feature=related
I'm just really pissed off. And there isn't a phone in the market that I want.
That looks like possibly a bad digitizer, you can replace that fairly cheaply if you are out of warranty. That would be my best guess, and keep in mind I am no expert. Here is a link so you can see the process:
http://www.youtube.com/watch?v=LQL9gakQyuI
ThePhantom97 said:
That looks like possibly a bad digitizer, you can replace that fairly cheaply if you are out of warranty. That would be my best guess, and keep in mind I am no expert. Here is a link so you can see the process:
http://www.youtube.com/watch?v=LQL9gakQyuI
Click to expand...
Click to collapse
That is what I was thinking.
I'll also see if I can milk anything out of Verizon. I'm already an unhappy customer, given the lack of ICS, especially when promised.
Yep, digitizer.
http://forum.xda-developers.com/showthread.php?t=1399085
Good luck with Big Red, and let us know if you get it resolved.
ThePhantom97 said:
Good luck with Big Red, and let us know if you get it resolved.
Click to expand...
Click to collapse
Thanks, I'll keep everyone updated.
I'm sure I'm not the only one who has had issues. Hopefully word spreads, especially to those still under warranty who are suffering from a faulty digitizer.

[Q] Graphic glitches and other problems

So I've been having a bit of trouble with my t989 lately, when I try unlocking the phone I will either get a black screen (the lock screen will appear for a split second before going blank if I hit the lock button again) or it won't track my finger movements on the screen. If I manage to unlock the device I end up seeing numerous graphic glitches ranging from the bar at the top w/ the clock/battery meter just gone and the keyboard not working.
I'm runing CM9.0.0 because I had issues with 10.2 (battery wouldn't charge) and 10.1.3 (similar to my lock screen issues but not as severe, still agitating) and also 9.1 which had the same exact issues as I'm having now. I've tried installing with different gapps but the same thing happens. The phone will work for a day or two, then the glitches come. After resetting, everything is normal for a day or so, then it's normal a few hours, etc. The time is getting narrower between reboots and it's a bit frustrating.
Does anyone know what I could be doing wrong, if anything? I flash via twrp and wipe, then install the rom, then install gapps, then reboot, wait 20min, reboot, and go about my business w/ the setup and such. I would be fine going back to 10.1.3 but jellybean roms and snapchat don't really like to work together on this phone for some reason. It's really the only app I use because it seems like the only way my friends want to communicate nowadays, so I'd prefer to stay on ics if possible...
If anyone can give any insight I'd really appreciate it
greenghoul said:
If anyone can give any insight I'd really appreciate it
Click to expand...
Click to collapse
Have you tried using Odin to flash back to stock? That is usually the recommended step if you are having problems with custom ROMs.
And the newest stock is 4.1.2, so at least you wouldn't have to be on ICS.
meekrawb said:
Have you tried using Odin to flash back to stock? That is usually the recommended step if you are having problems with custom ROMs.
And the newest stock is 4.1.2, so at least you wouldn't have to be on ICS.
Click to expand...
Click to collapse
I'll give that a try. Odin is just the program used to root originally, correct? Also, I want to stay on ICS if possible. So after doing that I'm going to try CM9 again and see how that works.
Anyway, the past few days I've been using AOKP mr2 milestone 1 and it's been okay. For some reason the battery life is bad even with juice defender and a task killer taking care of things. In a matter of minutes after clearing tasks I'm down from ~350mb of ram free to 60. Is that normal with that rom?
I'm not sure what to do at this point. I'm not the best with technology but i figured i was smart enough to figure this out...
bump.
I still haven't tried flashing w/ odin yet. Does anyone know where I can find a gingerbread stock rom? I've been looking for a while and can only find the jellybean one. Since I want to stay on ICS what I want to do is go from gingerbread and up to that rather than downgrading from the jellybean stock rom if that makes sense.

Display wakeup issues after screen replacement

Hey guys,
About 1 month ago the screen of my OP3 broke and I bought a replacement on eBay.
After the replacement I encountered problems, which only occured from time to time. Sometimes when waking up my device the screen stayed black.(Like on every 20th attempt it happened once). After pressing the power button some more times, the device finally unlocked. I am 100% sure that the device always unlocked on uneven attempts which means that the device at least woke up software-side.
I was totally sure that my replacement screen was kinda flawed and it is a not fixable hardware problem.
Then one week ago I switched from official LOS15.1 to the unofficial LOS16 rom and encountered big differences. The problem got noticebly worse. Waking up the device was a pain in the a**, it never worked on the first attempt on this rom. It's not unusual that it takes between 11 and up to 60 tries to wake up the device which makes it nearly impossible to use the phone. As before, the screen at least turns on software-side after every attempt. I can see this because the hardware buttons always light up.
Now after one week I switched back to official LOS15.1 and voilà, out of 20 attempts, the device instantly unlocked 19 times.
I know it is hard to understand and even to analyze such kind of problems, but there must be some solid solution for my problem.
Atm my clue is that original screens always offer more functions (e.g. gestures) than replacement lcd screens. Those functions are always connected to the software(rom). Is it possible that there is any other function (e.g. anything related to tap2wake or deepsleep) which is able to prevent my screen from turning on?
To deliver some more infos:
- I used standard system settings on both roms to test this out.
- "prevent" accitential wake up is turned off
- tried to disable gestures
- I tested my proximity sensor via an app, it seems to work flawless
- waking up screen in twrp is also very difficult and needs around 15-20 tries. Does anyone see any pattern?
gt-kingz said:
Hey guys,
About 1 month ago the screen of my OP3 broke and I bought a replacement on eBay.
After the replacement I encountered problems, which only occured from time to time. Sometimes when waking up my device the screen stayed black.(Like on every 20th attempt it happened once). After pressing the power button some more times, the device finally unlocked. I am 100% sure that the device always unlocked on uneven attempts which means that the device at least woke up software-side.
I was totally sure that my replacement screen was kinda flawed and it is a not fixable hardware problem.
Then one week ago I switched from official LOS15.1 to the unofficial LOS16 rom and encountered big differences. The problem got noticebly worse. Waking up the device was a pain in the a**, it never worked on the first attempt on this rom. It's not unusual that it takes between 11 and up to 60 tries to wake up the device which makes it nearly impossible to use the phone. As before, the screen at least turns on software-side after every attempt. I can see this because the hardware buttons always light up.
Now after one week I switched back to official LOS15.1 and voilà, out of 20 attempts, the device instantly unlocked 19 times.
I know it is hard to understand and even to analyze such kind of problems, but there must be some solid solution for my problem.
Atm my clue is that original screens always offer more functions (e.g. gestures) than replacement lcd screens. Those functions are always connected to the software(rom). Is it possible that there is any other function (e.g. anything related to tap2wake or deepsleep) which is able to prevent my screen from turning on?
To deliver some more infos:
- I used standard system settings on both roms to test this out.
- "prevent" accitential wake up is turned off
- tried to disable gestures
- I tested my proximity sensor via an app, it seems to work flawless
- waking up screen in twrp is also very difficult and needs around 15-20 tries. Does anyone see any pattern?
Click to expand...
Click to collapse
You most likely got a bad part. OEM like One plus and xioami are known for using something called product binning. Which means their parts have a higher failure rate then other oems. They also dont make extra parts really so what you got was most likely just a generic screen like you can buy at any shop in China.
Nothing you can really do about it except try a different screen but to be honest I would get a different device and this time dont skip on the price. You get what you pay for and when a good device is cheap there is always a reason. (why do you think most of the owners and mods of XDA run Iphones as their daily drivers and leave android for a hobby)
gt-kingz said:
Hey guys,
About 1 month ago the screen of my OP3 broke and I bought a replacement on eBay.
After the replacement I encountered problems, which only occured from time to time. Sometimes when waking up my device the screen stayed black.(Like on every 20th attempt it happened once). After pressing the power button some more times, the device finally unlocked. I am 100% sure that the device always unlocked on uneven attempts which means that the device at least woke up software-side.
I was totally sure that my replacement screen was kinda flawed and it is a not fixable hardware problem.
Then one week ago I switched from official LOS15.1 to the unofficial LOS16 rom and encountered big differences. The problem got noticebly worse. Waking up the device was a pain in the a**, it never worked on the first attempt on this rom. It's not unusual that it takes between 11 and up to 60 tries to wake up the device which makes it nearly impossible to use the phone. As before, the screen at least turns on software-side after every attempt. I can see this because the hardware buttons always light up.
Now after one week I switched back to official LOS15.1 and voilà, out of 20 attempts, the device instantly unlocked 19 times.
I know it is hard to understand and even to analyze such kind of problems, but there must be some solid solution for my problem.
Atm my clue is that original screens always offer more functions (e.g. gestures) than replacement lcd screens. Those functions are always connected to the software(rom). Is it possible that there is any other function (e.g. anything related to tap2wake or deepsleep) which is able to prevent my screen from turning on?
To deliver some more infos:
- I used standard system settings on both roms to test this out.
- "prevent" accitential wake up is turned off
- tried to disable gestures
- I tested my proximity sensor via an app, it seems to work flawless
- waking up screen in twrp is also very difficult and needs around 15-20 tries. Does anyone see any pattern?
Click to expand...
Click to collapse
As an experiment, try stock OOS and see whether the issue goes away.
i too have this problem cant find any solution anywhere been trying for about a week now arrggghh
ireaper4592 said:
i too have this problem cant find any solution anywhere been trying for about a week now arrggghh
Click to expand...
Click to collapse
tnsmani said:
As an experiment, try stock OOS and see whether the issue goes away.
Click to expand...
Click to collapse
Hey there again. I know my answer is kinda late but I wanted to share my experience. So I tried like 10 different custom ROMs with different Android version. The problem got even worse sometimes.
Anyway a few days ago I installed stock OOS and the problem is fixed now. I could not believe at first, but after excessive testing I am 100% sure now.
Anyone can tell why? Is the stock display driver proprietary?
TBH I always used to use custom ROMs (mostly CyanogenMod and now Lineage. Now on stock rom O feel like everything is better than ever before. Battery life, performance. Some features even offer more customization than custom ROMs.
I always thought the opposite is the case since custom roms advertise things like this. I will definitely stick with stock rom for now!
gt-kingz said:
Hey there again. I know my answer is kinda late but I wanted to share my experience. So I tried like 10 different custom ROMs with different Android version. The problem got even worse sometimes.
Anyway a few days ago I installed stock OOS and the problem is fixed now. I could not believe at first, but after excessive testing I am 100% sure now.
Anyone can tell why? Is the stock display driver proprietary?
TBH I always used to use custom ROMs (mostly CyanogenMod and now Lineage. Now on stock rom O feel like everything is better than ever before. Battery life, performance. Some features even offer more customization than custom ROMs.
I always thought the opposite is the case since custom roms advertise things like this. I will definitely stick with stock rom for now!
Click to expand...
Click to collapse
Thanks for the confirmation. The cheaper screens seem to have an issue which is not faced by the costlier ones. I have found while roaming the threads that sometimes flashing OOS helps. May be a driver issue.
My understanding from what I've read, third party displays needed kernel support.
I paid OP to replace mine - no problems.
Hi!
I'm having a similar issue with my Oneplus 5. Had my screen replaced (new one: OEM) and now it doesn't wake up most of the time either using power button or double tap or fingerprint scanner. I tried everything that I read on forums but nothing worked. Now I seem to have found a solution that I haven't read anywhere yet: I turned off night mode and now it's working as it should. Actually, whenever I want to use any screen adjustment feature like night mode, reading mode etc the screen doesn't wake up. But if I keep the default settings, there is no problem. The issue is definitely the new screen because before that I used night mode all the time (I mean after dark). Now I'm still thinking if I should return the phone to the repair shop and ask for another screen (they offer one year warranty after the repair) or just deal with it... I mean these OEM screen are cheap for a reason (as someone had written here before) and there is no guarantee that the next one will be good, and I don't feel like waiting weeks again for an uncertain outcome, also I can live without said features (gonna miss night mode tho'). Any suggestion? Should I give it a try? Maybe the repair shop made a mistake during assembly? Anyway, I hope this comment will be helpful for those lurking for a solution for a similar problem.
csabatoro said:
Hi!
I'm having a similar issue with my Oneplus 5. Had my screen replaced (new one: OEM) and now it doesn't wake up most of the time either using power button or double tap or fingerprint scanner. I tried everything that I read on forums but nothing worked. Now I seem to have found a solution that I haven't read anywhere yet: I turned off night mode and now it's working as it should. Actually, whenever I want to use any screen adjustment feature like night mode, reading mode etc the screen doesn't wake up. But if I keep the default settings, there is no problem. The issue is definitely the new screen because before that I used night mode all the time (I mean after dark). Now I'm still thinking if I should return the phone to the repair shop and ask for another screen (they offer one year warranty after the repair) or just deal with it... I mean these OEM screen are cheap for a reason (as someone had written here before) and there is no guarantee that the next one will be good, and I don't feel like waiting weeks again for an uncertain outcome, also I can live without said features (gonna miss night mode tho'). Any suggestion? Should I give it a try? Maybe the repair shop made a mistake during assembly? Anyway, I hope this comment will be helpful for those lurking for a solution for a similar problem.
Click to expand...
Click to collapse
Did you try OOS?
OEM screen is not cheap (atleast compared to what is offerred online).
May be you are better off with what you have since you have found a work around. Who knows what you will get next time?
Yea I have same problem it works totally fine on oos but on custom roms it is ****ed up
skymera said:
My understanding from what I've read, third party displays needed kernel support.
I paid OP to replace mine - no problems.
Click to expand...
Click to collapse
How much plz?
Shreeram02 said:
Yea I have same problem it works totally fine on oos but on custom roms it is ****ed up
Click to expand...
Click to collapse
Thank you also for confirming that on OOS there is no issue. Looks like the cheaper of the online replacements have this issue while the costlier ones don't.
Funniest thing is I have a slim ROM backup on 7.1. and that works fine so like what the f--- any ideas people?
gt-kingz said:
Hey guys,
About 1 month ago the screen of my OP3 broke and I bought a replacement on eBay.
After the replacement I encountered problems, which only occured from time to time. Sometimes when waking up my device the screen stayed black.(Like on every 20th attempt it happened once). After pressing the power button some more times, the device finally unlocked. I am 100% sure that the device always unlocked on uneven attempts which means that the device at least woke up software-side.
I was totally sure that my replacement screen was kinda flawed and it is a not fixable hardware problem.
Then one week ago I switched from official LOS15.1 to the unofficial LOS16 rom and encountered big differences. The problem got noticebly worse. Waking up the device was a pain in the a**, it never worked on the first attempt on this rom. It's not unusual that it takes between 11 and up to 60 tries to wake up the device which makes it nearly impossible to use the phone. As before, the screen at least turns on software-side after every attempt. I can see this because the hardware buttons always light up.
Now after one week I switched back to official LOS15.1 and voilà, out of 20 attempts, the device instantly unlocked 19 times.
I know it is hard to understand and even to analyze such kind of problems, but there must be some solid solution for my problem.
Atm my clue is that original screens always offer more functions (e.g. gestures) than replacement lcd screens. Those functions are always connected to the software(rom). Is it possible that there is any other function (e.g. anything related to tap2wake or deepsleep) which is able to prevent my screen from turning on?
To deliver some more infos:
- I used standard system settings on both roms to test this out.
- "prevent" accitential wake up is turned off
- tried to disable gestures
- I tested my proximity sensor via an app, it seems to work flawless
- waking up screen in twrp is also very difficult and needs around 15-20 tries. Does anyone see any pattern?
Click to expand...
Click to collapse
Yes, I have the same issue and I wanted to revert back to Stock OOS, but I just tried Caesium latest kernel, and the display wakeup issue seems to have gone. I'm using Havoc OS 2.3 based on Android Pie.
Guys the latest mad kernal reborn it wakes up all the time
At least for my screen
It used to be worse on all the other kernals
Finally found a solution
I had same problem on custom roms after replacement of display of my oneplus3...i was on oos 5.0.8 i had no issues in that but am a custom rom user and now the solution is flash any rom clean flash not dirty flash and flash gapps then flash any module if you want like magisk and then reboot setup the device and after first boot flash mcd custom kernel and yippeee enjoy... Present am on havoc os with no issues... Try and let me know...
Mohammed Raihan said:
I had same problem on custom roms after replacement of display of my oneplus3...i was on oos 5.0.8 i had no issues in that but am a custom rom user and now the solution is flash any rom clean flash not dirty flash and flash gapps then flash any module if you want like magisk and then reboot setup the device and after first boot flash mcd custom kernel and yippeee enjoy... Present am on havoc os with no issues... Try and let me know...
Click to expand...
Click to collapse
post link to one u have plz
Mail me i have that file..
[email protected]
There is issue while sending here
Mohammed Raihan said:
[email protected]
There is issue while sending here
Click to expand...
Click to collapse
got anyway working fine cheers dude
Even i have the same problem as mentioned above..even i changed my oneplus 3 display
I always prefer custom roms..but screen wakeup issue had made my phone worse...then i tried oos 5.0.8 and it works like a charm...yeah i know its very old android version but no other option though...
Others who have same problem and have no issues going back to oos oreo then go for it...your problem is solved..
---------- Post added at 01:47 PM ---------- Previous post was at 01:43 PM ----------
ireaper4592 said:
got anyway working fine cheers dude
Click to expand...
Click to collapse
Is this kernel working for you!??

Categories

Resources