Quick question on flashing ROM's... - T-Mobile, Samsung Galaxy SIII

So I have decided to finally root my Galaxy S III, and I haven't installed a custom ROM since my Galaxy S days a few years back, so I am a little iffy on certain things. I was successfully able to root it and everything, I just have a quick question about backing up. When installing a custom ROM and wiping everything, I will lose everything on my phone currently correct? This includes music, photos, etc? I have backed up my phone using Titanium Backup Pro, but I am assuming since that is just for data and apps, that won't include my music and photos on my internal storage, correct? So, will I need to manually back those up? Thank you for help. Also any suggestions ROM's would be helpful; I was thinking of flashing Masterpiece V7 since that is based off of Cyanogen 11 with KitKat 4.4.4. Thanks once again!

Internal sdcard wont be wiped unless you factory reset while stock recovery is installed. Still, you should always have a backup of ALL your important data. Things can always go wrong. You are never guaranteed anything.

Ah, so my internal storage won't be wiped when I perform a factory data/reset using CWM Recovery? That's mandatory since this will be my first ROM install, correct?

BigWorldJust said:
Ah, so my internal storage won't be wiped when I perform a factory data/reset using CWM Recovery? That's mandatory since this will be my first ROM install, correct?
Click to expand...
Click to collapse
Yeah it won't wipe your internal SD and yup, its mandatory!

Thanks for all of the help! What exactly is erased when performing those functions?

Everything on the /data partition except internal sd.

Ah, alright. Are there any specific ROM's you guys recommend? I am trying to have the most stable version of 4.4.4, essentially.

BigWorldJust said:
Ah, alright. Are there any specific ROM's you guys recommend? I am trying to have the most stable version of 4.4.4, essentially.
Click to expand...
Click to collapse
We cannot "recommend" any specific ROMS here since everybody's needs and usability requirements are different and we don't want to take away from other developers who have worked hard on their ROMS. I can however suggest not to go with 4.4.4 because it can make rooting and modding more difficult and it adds absolutely nothing to the 4.4.2 usability. It just adds some security features. If you like stock and TW, go with a stock based ROM. if you don't like all that bloatware and want a more "pure android" experience, go with a AOSP based ROM. But I would suggest just trying a few out until you find one that you like.
Ah, so my internal storage won't be wiped when I perform a factory data/reset using CWM Recovery? That's mandatory since this will be my first ROM install, correct?
Click to expand...
Click to collapse
From my experience, you don't have to do a factory reset if you are going from a TW based ROM to TW or AOSP to AOSP of the same or new version of android (4.3 -> 4.3 or 4.2 -> 4.3), although it is generally recommended. But you do have to factory reset when switching between AOSP, AOKP and TW or downgrading versions.

Related

A few questions regarding install custom ROMs

hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
PUTALE said:
hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
Click to expand...
Click to collapse
1. No you do not need to run triangle away usually only have to run it if you are going back to stock and may want to return the phone.
2.Nope it has a Rom you are rooted !
3.That is what I do when installing a new rom factory reset wipe davlik and cache and install you may have to fix permissions with some installs as well after installing.
4.From the bit I played with the new Clean rom it is very stable with minimum if any grief Jedi 9 is also a awesome ROM and my current fave.
5.Just read up lots before you do it follow every step they tell you to take your time it is easy just make sure ya know what you are doing before you start.
6.Enjoy they are a awesome phone !!
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
PUTALE said:
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
do a backup in twrp before flashing a new one, you can always come back
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
DoctorQMM said:
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
Click to expand...
Click to collapse
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
[email protected] said:
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
Click to expand...
Click to collapse
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
PUTALE said:
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
Click to expand...
Click to collapse
Think of your Nandroid (TWRP) backup as a roll back to what you are comfortable with (check everything off so you do not lose a thing if you want) in case you find that the new thing you flashed isn't all that it was cracked up to be for you or something messes up. The Nandroid backup is EVERYONE's friend.
As for flashing a new ROM and having to start all over, I will use this as an example: I have two backups; one for Paranoid Android (4.2.1 AOSPA) and Clean 4.2.5 (4.1.2). When I originally flashed my stock to Clean, I must've gotten lucky by just wiping the system (ROM only and not a factory reset) and all my data transferred over just fine with no issues... but when flashing to PA, I had to do a full wipe then start from scratch (which was not bad if you sync your apps and contacts thru Google). Also, you might want to get another backup system such as Super Backup to back up your contacts and SMS messages (be careful with backing up call logs if you go to 4.2.1 ROMs because for some reason, things went wacky for me). Titanium is a good system to use for power users but sometimes, to keep it as simple as possible, count on Google at first for your app syncing (and if you get Amazon App Store, you will have to get that APK to download the apps from that store).
Anyway, from there (if you want to play with multiple ROMs) you now have a foundation. Dirty flashing (flashing a new version of a ROM you currently have without doing a full wipe... just in case you didn't know... for me, I just wipe System [no factory reset] then flash the upgrade) should be fine... again, I'm typing from experience because there are some people who do run into issues dirty flashing and is usually not supported by the devs unless you do a full wipe and flash. I have not had any issues whatsoever dirty flashing both PA and Clean versions.
As for methods of wiping, honestly they're all right... I just posted what I usually do when I want to do a full wipe. Only if you want to do a dirty flash, you won't have to wipe or do a partial wipe (I partial wipe e.g. Clean 4.0.5 to 4.2.5: Delete last Clean Rom backup through the Restore menu, Nandroid Back Up current working Clean Rom 4.0.5, Wipe System, Install the new 4.2.5, wipe Davlik and Cache (again, I do this just in case but some devs say it's unnecessary), then reboot and wait for the apps to reset... all was where it was when I left 4.0.5.
PUTALE said:
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
Click to expand...
Click to collapse
Yes... if you're retaining your current modem and recovery... to restore a rom just as it was when you backed it up, restore boot (which has the kernel), system and data. One your second question, when restoring a different rom , it's best to always restore system/data/boot together. You can use TiBu to restore your user app DATA, and individual apps usually have their own backup files you can restore (like Nova/Apex launchers [which can restore your widgets], calendar, etc).
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
I have never used that rom so I can't say for sure. Try it out and see what happens. If you don't like it, restore your backup.
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
That rom is one of the most recent 7105 (note2 international) samsung firmware releases... supposedly better battery life than LL7 or LL4. It's the stock MA6 pre rooted (i.e., has SuperSU app and binaries included). No other features added like you would find with CleanROM 4.2.5 for example. It includes rom and kernel... so it will write to your system, data, and boot partitions. Whatever custom recovery you have now and flash this with will not be touched.
thanks again.

[Q] Switching Between TWizz and AOSP

I have been looking in Q&A and all other subforums but I cant find a straight answer or a sticky.
What is the procedure for going from TWizz to AOSP and vise versa? Isn't there an internal SDCard issue going back to TW from AOSP? Can I not just do an Nandroid from TWRP back to my TWizz ROM?
spotopolis said:
I have been looking in Q&A and all other subforums but I cant find a straight answer or a sticky.
What is the procedure for going from TWizz to AOSP and vise versa? Isn't there an internal SDCard issue going back to TW from AOSP? Can I not just do an Nandroid from TWRP back to my TWizz ROM?
Click to expand...
Click to collapse
Thats what I did. The only problem I had with aosp was the internal sd, but I went back to touchwiz via nandroid and everything seems to be working fine. I only tried aisp for about a day and then went back. Hopefully I helped.
Somewhere, in some thread (at work, can't find it for you ATM) there is a flashable zip to fix the internal partitioning (?) issue going from 4.1 to 4.2... Hold on....
http://forum.xda-developers.com/showthread.php?p=37008568
Sent from my calculator watch.
Also, is CWM required for some reason? Can I still just use TWRP? Or is there some scripting issues or something? All the AOSP threads say use/flash CWM. Maybe they are just saying CWM as in a generic term for recovery?
spotopolis said:
Also, is CWM required for some reason? Can I still just use TWRP? Or is there some scripting issues or something? All the AOSP threads say use/flash CWM. Maybe they are just saying CWM as in a generic term for recovery?
Click to expand...
Click to collapse
honestly don't know, have not played with AOSP/CM on my note2 yet.
It was just random that I read the thread OP (i usually do for everything), retained that bit of info. Let me/us know what ya find out.
Sent from my calculator watch.
Installed AOSP Carbon. Let all my apps restore from Google. Right from the get go I could tell it was really fast, But I'm already going back to my TW ROM. I just couldn't be away from all of Sammy's add-ons.
I used the latest TWRP and flashed the AOSP + GApps with no problems. It booted fine. Played with it for a bit. Like I said let all my apps download again and played with some of the AOSP settings and ran a few benchmarks.
Process I used to go back to TW ROM.
Rebooted to TWRP
Wiped Cache/Delvik
Factory Reset
Wiped System
Formatted Data
Rebooted Recovery
Restored TWizz Backup
Flashed restore-sdcard-after-downgrade.zip
Wiped Cache/Delvik
Copied my internal SD backup back to internal SDCard
Reboot System
My restore had no issues and I am now back up and running just like I was before the AOSP ROM.

[Q] Giant Mess, need help please.

I am kind of stuck and have searched endlessly...
I am rooted and running AOKP - d2att (4.2.1 JOP40D) Build 1.17.2013
AT&T Samsung Galaxy SIII i747
I am trying to update the Rom - Everytime I have updated, I get the "unfortunately, android keyboard (aosp) has stopped" error. I just restore a backup and go to my older version again.
I was preparing to make another backup and noticed I'm out of space, my System Data is taking up 7,938MB!!! I have no idea why or how it got so out of control. I attempted to just do a Factory Reset, it looked as if it worked... however nothing was wiped.
Right now I'm just at a crossroads. I like the custom Rom (minus some serious flaws) but want to be able to update and have some free space. But I'm starting to think returning it to the stock firmware and just settling might be easier?
Any ideas on where I can clear up some space or what I can do to battle the AOSP error? Is there another Rom that may be a better choice, iI know they aren't "better" but an equal alternative maybe. I'm fairly new to all of this but have a decent understanding, I made a switch to Android after owning purely Iphones since the 3G.
SynysterNate said:
I am kind of stuck and have searched endlessly...
I am rooted and running AOKP - d2att (4.2.1 JOP40D) Build 1.17.2013
AT&T Samsung Galaxy SIII i747
I am trying to update the Rom - Everytime I have updated, I get the "unfortunately, android keyboard (aosp) has stopped" error. I just restore a backup and go to my older version again.
I was preparing to make another backup and noticed I'm out of space, my System Data is taking up 7,938MB!!! I have no idea why or how it got so out of control. I attempted to just do a Factory Reset, it looked as if it worked... however nothing was wiped.
Right now I'm just at a crossroads. I like the custom Rom (minus some serious flaws) but want to be able to update and have some free space. But I'm starting to think returning it to the stock firmware and just settling might be easier?
Any ideas on where I can clear up some space or what I can do to battle the AOSP error? Is there another Rom that may be a better choice, iI know they aren't "better" but an equal alternative maybe. I'm fairly new to all of this but have a decent understanding, I made a switch to Android after owning purely Iphones since the 3G.
Click to expand...
Click to collapse
Have you tried reflashing the ROM completely again from scratch with a full wipe ?
HOw are you installing the ROM ? When people say update I wonder if they mena a full wipe and flash of the ROM or are you using an updater
hednik said:
Have you tried reflashing the ROM completely again from scratch with a full wipe ?
HOw are you installing the ROM ? When people say update I wonder if they mena a full wipe and flash of the ROM or are you using an updater
Click to expand...
Click to collapse
Once I download the update I reboot into recovery. wipe cache and dalvik cache. I make a backup and then..
-install zip from sdcard
-choose zip from sdcard
then pick the downloaded update and then repeat the process with the gapps.
Once it loads, all my contacts and things appear there.. with the AOSP error.
I think after explaining this and reading your post, I should do a full wipe and install the newest version of the ROM. I hate to be a pest, what would be the best way to do this. I have Titanium Backup Pro. I really only care about my contacts and text messages and some apps.
SynysterNate said:
Once I download the update I reboot into recovery. wipe cache and dalvik cache. I make a backup and then..
-install zip from sdcard
-choose zip from sdcard
then pick the downloaded update and then repeat the process with the gapps.
Once it loads, all my contacts and things appear there.. with the AOSP error.
I think after explaining this and reading your post, I should do a full wipe and install the newest version of the ROM. I hate to be a pest, what would be the best way to do this. I have Titanium Backup Pro. I really only care about my contacts and text messages and some apps.
Click to expand...
Click to collapse
You have have to flash the updated gapps if you aren't. They are made for 4.2.2 and nothing earlier. If you flash the same gapps as you flashed earlier you'll get loads of issues.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
You have have to flash the updated gapps if you aren't. They are made for 4.2.2 and nothing earlier. If you flash the same gapps as you flashed earlier you'll get loads of issues.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, so I have ran the update gapps as well previously. A current status update. I backed up all my pictures, contacts and ran backup of system data with Titanium Pro. I wiped cache, cleared the Delvik cache, wiped data.. just realized I wasn't going into Mounts and Storage and not doing a format /system. That might explain why it was getting so massive. After doing those in the correct order, I flashed the ROM and Gapps and new Kernal. Its currently booting...
Success.. Its up and running the new Rom, however.. I have a new question. I have no apps and everything is back to how it all started. I know I can run titanium backup and restore things. But google is automatically installing my apps back one by one. There has to be a correct way to do this? I'm patiently waiting for it to install titanium so I can restore my texts and settings.
SynysterNate said:
Knew I was missing something.. I'm stuck now, I don't have enough free space for the new Rom, Gapps and a backup.
Click to expand...
Click to collapse
you dont have to make a backup every single time you want to update. thats whats taking up all your internal memory. i have 1 stock backup that i made the day i flashed aokp 4.1.2 and then 1 backup of my current setup. if i ever want/need to restore, i'm all set. if you want to make a backup every single time, move the older files to your PC and keep your most recent 1 or 2 on the phone. that'll give you enough space to move forward
SynysterNate said:
But google is automatically installing my apps back one by one. There has to be a correct way to do this? I'm patiently waiting for it to install titanium so I can restore my texts and settings.
Click to expand...
Click to collapse
Google restoring apps is an option you set during the one time initial setup.
you shouldn't be restoring system data, and it sounds like you're doing that. there are apps to restore texts easily. one that I use is sms backup and restore, which works well and takes maybe a minute.
it's cumbersome to remember every setting so I'd suggest writing them down or something similar.
sent from my i747 with xda-premium

Going to AOSP from TW 4.3

Hello friends,
I'm a happy touchwiz user running DN3 v3 with mj5 bootloader (knox free). All is well.
But i want to try new AOSP 4.4 builds like PARANOIDANDROID, PAC, omni etc. Is it possible to do that like from latest knox free bootloader and tw4.3 TO aosp?
Has anybody tried this? please suggest what procedure should i follow.
thanks
mani16985 said:
Hello friends,
I'm a happy touchwiz user running DN3 v3 with mj5 bootloader (knox free). All is well.
But i want to try new AOSP 4.4 builds like PARANOIDANDROID, PAC, omni etc. Is it possible to do that like from latest knox free bootloader and tw4.3 TO aosp?
Has anybody tried this? please suggest what procedure should i follow.
thanks
Click to expand...
Click to collapse
Hey,
You will love AOSP! I have tried CM11 and OMNI, and both were smooth and stable. You will have a much faster phone but you will use all the Samsung apps, including the S-Pen tricks. Your S-pen will still work though.
My advice? Well:
1. Make a Nandroid Backup (using your custom recovery). You might wanna get back to your current ROM if anything goes south or you just don't like AOSP.
2. Update your custom recovery. Actually I would suggest you do this even if you don't flash any AOSP 4.4 ROMs. I recommend TWRP 2.6.3.x.
3. Make a full wipe before installing anything. Full wipe means everything but your SD cards (internal and external). Though, I would recommend to also wipe your internal SD card, after you back up your stuff (watch out not to lose your nandroid backups that might be on your internal SD).
4. Flash the ROM you choose and be very careful to read the flashing instructions. You'll feel like an a$$hole if you ask for help on the ROMs thread and find out that you missed some step because you didn't read the OP carefully.
5. Usually you'll have to flash other fixes/addons for everything to work. Look for them in the OP, if it's needed or recommended, it will be listed there.
I hope that helps! Come back if you have trouble.
flash AOSP
Just flash as usual but remember you need to read the instruction carefully for each aosp rom forum.
1. you need to use cwm 6.0.3.7 version onward or TWRP 2.6.1.0 ( can search through xda forum)
2. Do full wipe including System, Data, Cache, Dalvik, Android Secure, and Preload.
3. Flash the aosp rom you prefer
4. Flash the gapps
5. reboots (It might take some time for first time)
Ok thanks guys, I'll try it today.
Sent from my BE(a)ST.. Samsung Galaxy Note2

Going from stock to stock (basically just wiping) while on CWM recovery

I'm already on the stock KK ROM (E98020g)., but with the CWM recovery. I just want to wipe everything while keeping the stock ROM, but I've seen that factory resetting or flashing stock ROMs while on a custom recovery will probably cause a some sort of brick...
I've already briefly seen the pinned stock ROM tutorial already. Before I try that (assuming it still works), can anyone tell me if there's a simpler way? It's going to take me a long time to go through that entire thread so it would be an immense help if someone could just tell me.
Have you try using system setting, storage, hard reset?
hawkwind212 said:
Have you try using system setting, storage, hard reset?
Click to expand...
Click to collapse
That's what I meant by "factory reset", sorry. Everything I've read indicates that this will cause a softbrick, which I'm trying to avoid. Is this info wrong?
I assume the reason that you install cwm and running the stock ROM is so you can have a nandroid backup? Otherwise Why else would you installed a custom recovery? So backup the ROM and do the factory reset with kk instead of cwm, which may be the reason that some people are getting the soft bricks. I can't guarantee you that everything will be according to the plan, but that's the reason backup function is there.
I originally installed CWM because I wanted to wipe and try out a custom ROM (probably CM). But then I noticed all the serious issues people were having with various custom ROMs, so I decided to skip the custom rom (for now) and just get on with wiping. I really don't want to risk any type of brick with this device.
Anyway, I think I'm going to try out the pinned stock rom thread I mentioned in the OP.

Categories

Resources