Related
Last night, I decided to use my HD2 charger, since it was already in my drawer. Charged it around midnight and woke up around 4 and it only charged 10% So I decided to use the Motorola charger, and when I woke up around 6 it was fully charged in less than 2 hours. So my question is, are we only suppose to be using the charger that came w/ it or is my outlet possessed
The actual cable doesn't matter, but the charging port seems to. My phone doesn't charge as well when hooked up to my HTC Aria's usb charge vs. the one that came with my Atrix or even the old Motorola Z9 charger I have (like this one since it's longer than my USB cable and it reaches my bed so I can do "Sleep as a Droid"
I tried using my Nexus charger last night and the phone didn't like it at all. It started FC'ing all over the place and I had to reboot it. The voltage on both chargers are the same. For a moment I thought I f'd it up but it's been fine all day.
I'm using Blackberry's micro usb chargers with no problem. I bought a few of these for my N1, and they work fine with the Atrix. The N1 charger from Google/HTC does not work like you all have said.
http://www.amazon.com/BlackBerry-Fo...PN0S/ref=sr_1_2?ie=UTF8&qid=1298495146&sr=8-2
Roricken said:
Last night, I decided to use my HD2 charger, since it was already in my drawer. Charged it around midnight and woke up around 4 and it only charged 10% So I decided to use the Motorola charger, and when I woke up around 6 it was fully charged in less than 2 hours. So my question is, are we only suppose to be using the charger that came w/ it or is my outlet possessed
Click to expand...
Click to collapse
Check the amp output of the charger, a good one will be at 1amp, where most are around 500ma or less.
If you're having charging issues, it's probably because the charger isn't supplying the required 800ma draw. Most USB power adapters still only output 500ma max. Be sure your 3rd party charger can output 800ma or more. For example the Apple USB adapters can output anywhere from 1000ma to 2000ma and they work great charging the Atrix.
Hope this helps!
bsinc1962 said:
I tried using my Nexus charger last night and the phone didn't like it at all. It started FC'ing all over the place and I had to reboot it. The voltage on both chargers are the same. For a moment I thought I f'd it up but it's been fine all day.
Click to expand...
Click to collapse
co.ag.2005 said:
I'm using Blackberry's micro usb chargers with no problem. I bought a few of these for my N1, and they work fine with the Atrix. The N1 charger from Google/HTC does not work like you all have said.
Yep to both. I tried my N1 charger last night, and the Atrix wasn't having it. Tried my BB charger at work and it charged up quickly. It's weird. On the plus side, a second usb cable is only 6 bucks from at&t ... which is fair.
Click to expand...
Click to collapse
The Atrix must be a little charge sensitive (maybe it has a rapid charge mode or something). We have at our counter a surge protector that also has two built in USB ports for charging. We've charged our iPhone 4 and my Captivate at the same time for months.
When I plugged in the Atrix, it starting chirping (like switching the charge mode on/off/on/off) and the iP4 _also_ started flipping out (again, like the power was being interrupted).
I wound up plugging into the same surge protector, but used a regular AC outlet and the supplied USB>>AC adapter. Everything ran/charged just fine.
Mine seems to freeze up and force close often whenever I charge it with my blackberry cord. The same cord had been charging my Backflip fine for months.
Need the Amp rating
I don't have an Atrix yet (I will soon).
The Blackberry charger that I have puts out 700mA.
But I have tried to use other micro USB chargers with the BlackBerry (BB) and if the charger does not put out the right amps, the BB keeps flipping into/out of clock mode. If you then plug in a BB charger....works great.
A USB-Port is only supposed to deliver 500mA by norm.
So, to charge the phone it hast to be >=500mA.
That explains why the Atrix charges really slow hooked up to a PC, since the battery is ~1900mA/h
You do the math
I'm using a Samsung wall charger right now with no problems.
Has anyone tried using an apple charger/aftermarket apple chager on their Atrix yet? I have an incase combo charger that can feed 2 amps (necessary for the ipad) and I'm worried it might cook something.
http://www.goincase.com/products/detail/combo-charger-ec20035
Yeah I use a cheap generic CELLNET wall charger and works perfect no problems
wirelessF said:
I'm using a Samsung wall charger right now with no problems.
Has anyone tried using an apple charger/aftermarket apple chager on their Atrix yet? I have an incase combo charger that can feed 2 amps (necessary for the ipad) and I'm worried it might cook something.
http://www.goincase.com/products/detail/combo-charger-ec20035
Click to expand...
Click to collapse
whoa
$39 for a usb combo charger ?
does it give me a bj everytime i plug it in ?
Thanks for all the help everyone. I decided to just stick w/ the Moto one for now. Sure does take freaking forever to charge via usb on your computer. Lots of juice power
I just got this charger from Amazon fro $5.99 with 2 day shipping (if you have Prime)and it is OEM !
http://www.amazon.com/Motorola-Vehi..._1_1?s=wireless&ie=UTF8&qid=1298656516&sr=1-1
I've used my wife's captivate charger, and it seemed to charge just fine, will need to look and see the output.. I may need to try my Iphone charger and see the rating...
The B&N Nook charger works fine too.
i forgot to bring my charger to work today, phone died. then i found a charger in my desk for an old bluetooth headset i no longer have. 5v-550ma......seems to be working but i suppose we shall see
I have been using my HTC Evo charger without a hitch.
Not sure if this is an issue, or if its standard. But here is what im facing.
A charge off the wall will get my Tmobile SGS2 to a full charge (from around 15%-20%) with the stock plug and cable in about an hour to an hour and a half. However charging from my laptop or from a car charger im only getting a total increase in battery 15% in an hour. I tried to use the stock cable with the laptop and got about 25% in an hour and a half. I tried to use the stock cable in my car and only got 7% in 45 minutes.
Anyone have any ideas?
When charging from the car or from a laptop, the power is limited to what the cable/charger can supply which might not be sufficient for the SGS2. For the car charger, you can try buying one that supplies more amps, but for the laptop, theres really nothing you can do, as it is limited by the USB cable itself.
Do you mean the USB cable or do you mean the actual plug & internal workings of the laptop? because i have tried several cables. And just also remembered that i tried the stock cable as well with crappy results.
you can buy a 2A charger, and it will charge a lot faster, that's what i use in my car
at home or office, i just use the regular charger, as i always carry extra battery packs
When you plug it into the laptop it only gives out a limited amount of amps unlike the regular charger that came with the phone. The one that came with the phone regulates the charge so that it doesn't overcharge your device or anything. The laptop USB plug is supposed to be meant for peripherals like a mouse and stuff so it doesnt give out that much amps, therefore charging slower than a regular charger.
I use the t-mobile rapid car charger, It can charge this beast in about 45 minutes. It also has a 2nd port for a 2nd device.
Deebo took your bike too?
Really?! I've never seen my charging current go over 700 mA, even with a 2 amp charger.
I'd happily give up some long-term lifetime for faster charging.
Sent from my Galaxy S II using Tapatalk.
They have a home charger too that's a home charger plus car charger in 1. I use them in the cars but they're great for trips cause you have a 2 in 1 charger.
With 3 batteries and a external charger though, I never need a home charger and haven't even put this on a charger yet.
Just as most of the others have said here, the charge is going to be limited to what the source can put out. If you get another charger (2A charger) then it will be able to charger faster but you also want to be careful with using after market chargers there are some that can negatively affect your battery by overcharging which is when the phone gets fully charged but the charger does not ever stop with the flow of power to the device.
Ok Thanks all.
Guess i need a new car charger and something for the office.
Also did some crawling through "Mother of all battery life" thread found some good ideas there for making this thing last longer on the charge its got.
Im having the same problem my fone takes forever to charge...im pluged into the wall using the charger in the box n it took me no joke 7 hours to charge my fone!
Im on it rite now as its plugged i to the wall n im losing power instead of charging...i tested the voltage n its fine ...is tgere anythin i can do?
Sent from my SGH-T989 using XDA Premium App
I, myself, actually haven't used the OEM charger that came with the phone. Although I did notice it is quite small and the phone battery is a 1850mAh (larger than normal) that might affect the charging rate. I am currently using the old HTC charger that came with my Sensation and it charges fully in about 2 hours. If you want a charger that charges your phone in an hour and a half, I recommend going into a T-mobile store and grabbing the Wallcharger they sell. It charges 33% faster than OEM chargers and does not harm your device nor kill your batteries.
You can find it by clicking here
Exactly same problem as OP.
OEM wall charger charges phone to full in couple of hours but laptop USB or car USB is doing at 10% / hour assuming you don't do anything on your phone but just leave it there to be charged. Otherwise you'll be losing battery rather than being charged.
513263337 said:
Exactly same problem as OP.
OEM wall charger charges phone to full in couple of hours but laptop USB or car USB is doing at 10% / hour assuming you don't do anything on your phone but just leave it there to be charged. Otherwise you'll be losing battery rather than being charged.
Click to expand...
Click to collapse
As explained in previous post, this is due to limitations in the laptop USB drive and depending on what car charger you have, the phone might suck up more juice than it is able to provide.
so this is nothing a kernel or any other tweak can fix?
mightymike889 said:
so this is nothing a kernel or any other tweak can fix?
Click to expand...
Click to collapse
no a new kernel or any other tweak wont work.
So i gotta buy a new charger!?!
Sent from my SGH-T989 using XDA Premium App
Yes, or if you have like an old microUSB charger from HTC or another Samsung phone (Samsung Vibrant) you can try using those.
the 2A chargers from BlackBerry are the best
So, you guys are seeing the phone draw over 700 mA (when the charger is capable)?
If I use my iPad charger (2A), I still top out at 700 mA, and the ~4 hours that go with it. :/
Even my 1A car charger tops out at 700 mA, that's why I thought it was a hardware issue.
Sent from my Galaxy S II using Tapatalk.
Hi all,
Just a quick question, anyone currently using a 2000 / 2100 mah USB car adaptor with their G-Note?
I currently have a 1000 mah adaptor I believe and after a 2.5 / 3 hour journey, whilst charging, connected to the cars bluetooth and using Co-Pilot, I was down to about 20 / 30 % I think at the end of it.
Will the 2000 / 2100 mah USB car adaptors off ebay be ok to use with the G-Note and will it help keep the phone charged when using the phone as a SatNav?
See link to ebay item
Thanks in advance.
A DC power supply shouldn't be measured in mAh... Maybe they meant 2100 milliamperes? 2100 milliamps would be 2.1 amps which is the more amperage than my HP Touchpad charger (2 amps) which should be more than enough.
I don't know how much I would trust an ebay seller that can't even get the terms correctly, but if it's a 2.1 amp charger it should be fine.
Cool, thanks for the heads up PickleHead, I just thought that mAh was the rate of amp flow per hour and didn't realise it was specific for discharge rate of batteries. I'll have another look around.
Just had a look on the back of the USB mains plug for the Note and my Dell Streak and they both have OUTPUT @ 1.0A which is 1 amp right? But a 2.1 amp USB car adaptor should still be fine right? What about 3.1 or even 4.2 amp ones....or are they way too much for the Note?
I've also discovered today what a thirsty little beast the Note is while running satnav. I have a 1 amp car charger with the centre pins shorted together to force the phone to go into "AC Charging" mode, which it does perfectly well. However, over a 20 mile, 30 minute journey I was seeing the battery drop by about 1% per mile (every 90 seconds) whilst charging. That was with CoPilot Live Premium. On the way back I switched to Navfree, with pretty much the same result. I even have CoPilot set to dim the display in between turning announcements. On my old phone that make the difference between a solidly increasing charge and one that struggles to keep up. On the Note it was losing charge even with that feature enabled.
I'm going to need to be finding an alternate charger for the car, so recommendations would be welcome. I can't see a 2 Amp charger being a problem. The Note should take as much as it needs/wants, so long as the charger lets it have the juice it demands.
I would go for the official dock, except I'm told that it won't accommodate the Note whilst protected by a gel skin/case, so the official dock is a non starter for me.
Griffin PowerJolt car charger
tdodd said:
I've also discovered today what a thirsty little beast the Note is while running satnav. I have a 1 amp car charger with the centre pins shorted together to force the phone to go into "AC Charging" mode, which it does perfectly well. However, over a 20 mile, 30 minute journey I was seeing the battery drop by about 1% per mile (every 90 seconds) whilst charging. That was with CoPilot Live Premium. On the way back I switched to Navfree, with pretty much the same result. I even have CoPilot set to dim the display in between turning announcements. On my old phone that make the difference between a solidly increasing charge and one that struggles to keep up. On the Note it was losing charge even with that feature enabled.
I'm going to need to be finding an alternate charger for the car, so recommendations would be welcome. I can't see a 2 Amp charger being a problem. The Note should take as much as it needs/wants, so long as the charger lets it have the juice it demands.
I would go for the official dock, except I'm told that it won't accommodate the Note whilst protected by a gel skin/case, so the official dock is a non starter for me.
Click to expand...
Click to collapse
Griffin PowerJolt Micro for iPad.
Output: 5 volts DC at 2.1 amps
Output power: 10 watts
http://store.griffintechnology.com/ipad/original-ipad/powerjolt-micro-ipad
My Griffen Powerjolt charges the battery while Google navigation is running.
It's possible Google nav is less of a power drain than Navfree. I'll have to try it.
- Frank
I am using the original samsung galaxy tab charger which is rated at 2amps, it works fine with igo, but while using pandora, blurtooth a2dp and igo, the phone charges slowly...
Sent from my GT-N7000 using XDA App
I hav always used a 2A car adaptor as even the Nexus One was a thirst beast as it played the audio over bluetooth to the car dock that had its own speaker.
It works fine with Navigation/Navfree/Waze and the phone charges rather than discharges slowly with the lower power adaptors. The Official Samsung Car Dock comes with a power adaptor that is only rated at 1Amp.
The adaptor I use was intended for an iPad which needs at least 2A. Some adaptors have ratings that should be taken with a pinch of salt. If you can find one rated for an iPad (the type that plugs into the cigar socket and has a USB socket on it rather than an integral iPad connector) then you can't go wrong.
For those asking, I got my Samsung Car Dock from Handtec (in the UK) at: http://www.handtec.co.uk/product.php/5881/samsung-galaxy-note-official-vehicle-dock-kit-
I have the micro usb power cable from the original htc Nexus One car dock. I believe that this provides a 2 amp charging current, and my note charges, albeit slowly while using the phone as a sat nav with google maps
On a similar note about charging (which seems appropriate here), I have the original Galaxy Tab which doesn't allow charging over USB with the standard cable. However I bought an adapter which allows the Tab to charge from a USB port but you can't use it for data, I'm wondering if it's ok to use the same adapter with the Note so it charges quicker off a USB port?
Thanks for the link to the car dock, that looks pretty good
John
I had an ATT branded iphone charger with usb port. When i plug in a usb cable and try to charge my htc on in the car it complains it cannot charge at full speed. What brand/make car charger will get me a normal charge in the car?
keroppilee said:
I had an ATT branded iphone charger with usb port. When i plug in a usb cable and try to charge my htc on in the car it complains it cannot charge at full speed. What brand/make car charger will get me a normal charge in the car?
Click to expand...
Click to collapse
I grabbed this one here: http://www.newegg.com/Product/Product.aspx?Item=9SIA07R03A7077
Just received it a few days ago, haven't been able to fully test it, but it seems to be just fine.
Many car chargers just don't put out enough juice - especially older carrier branded ones (ie: cheaply made and sold at a premium). I'd be curious to know the rated output of yours.
The wall charger that ships with the phone is rated at 1 amp output. I've used a 500mA charger and haven't seen that message, though it does charge noticeably slower (as you would expect, with half the current). I don't know the specs on the charger that peteschlabar linked to, but you can find hundreds of chargers on Amazon or Newegg that are rated at or above 1A for a few bucks.
Well I didn't look at the specs of the charger I linked, but I was able to use it the other day while using my phone as a GPS. Battery level started at 94%, and was up to 96% about 1 hour later while using the charger and GPS nav with google maps for the entire hour. I'm completely stock, and the phone gets pretty toasty while charging.
But, main point - the charger seems to work just fine, keeping the phone charging upwards while in use.
Ahhh the joys of having an actual power outlet in your car. I don't have to worry about such things!
But my truck doesn't have that, so for my truck I bought the usb one that goes in the lighter, and it's powerful enough to charge an iPad, it's Belkin brand and it charges my phone very nicely, doesn't seem to be any slower than the house charger.
Sent from my HTC One.
I been using the same car charger since the inc2.
Still working great!
hatchmt said:
The wall charger that ships with the phone is rated at 1 amp output.
Click to expand...
Click to collapse
andybones said:
I been using the same car charger since the inc2. Still working great!
Click to expand...
Click to collapse
The wall charger that ships with this phone is the same, albeit slightly updated, model as the one that shipped with the original HTC Droid Incredible 3½ years ago, which I still use to charge my phones. They're both model number TC U250 with 5V-1A output and both have the same 100-240V~200mA input. The part numbers are different, though, and they're cosmetically different on the back with extra certifications on the newer one, and they also added Spanish and Chinese translations to the English.
I still use the same Verizon-branded car charger in my car from when I originally bought my Incredible, and if anything, it charges this phone faster than it did my Incredible and Incredible 4G. It went from 40-something percent to fully charged in about an hour of driving the other day with intermittent use. I was pleasantly surprised to see that.
keroppilee said:
I had an ATT branded iphone charger with usb port. When i plug in a usb cable and try to charge my htc on in the car it complains it cannot charge at full speed. What brand/make car charger will get me a normal charge in the car?
Click to expand...
Click to collapse
I am a big fan of Y-CHARGE 4.2 Dual USB Car Charger By TYLT
what do you use to charge your sw3 ? i was charging it with an ASUS charger (100-240v) and after 20min the watch was very hot ! It's normal ? what kind of charger do you use ?
I use a genuine samsung charger (From a S4) and it gets hot too. I don't we should worry...
I checked the amps it draws from charger it showed ~.520 from wall charger, same as USB.
stupid design , its not easy to put the cable into the mini usb port
Sent from my Nexus 5 using XDA Free mobile app
1. It is micro USB, not mini
2. There is always sacrifice in favor of ip68, I prefer waterproofing. But wireless qi charging would be good.
my mistake , anyway how long do yall get it fully charged? mine take pretty fast , can see percentage move up 1% in a few seconds , the watch has some heat up during charge .
Sent from my Nexus 5 using XDA Free mobile app
kimbap said:
my mistake , anyway how long do yall get it fully charged? mine take pretty fast , can see percentage move up 1% in a few seconds , the watch has some heat up during charge .
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
30 mins :good:
king conan said:
I use a genuine samsung charger (From a S4) and it gets hot too. I don't we should worry...
Click to expand...
Click to collapse
Does it gets hot when charging directly from a laptop? The charger of a S4 probably deliveres around 1200mA where a laptop usually does only around 500.. A tablet charger even more..
I think quick charging (many times) is no good for battery life on long term! Except when the internal charging chip does limit it the right way. But when it gets hot[emoji6]
BTW Correct me if I'm wrong..
Send with Tapatalk on Sony Z2
Mine limits it at ~540mamps from 2A wall charger. Also, never seen it really hot, warm yes, very warm yes, but not dangerously hot.
I have bought a Sony Smartwatch 3 for my husband for Christmas but I have no idea about power adapters and am afraid to use the wrong one. The Sony site simply recommends we use Sony adapters (of course they would) but they don't even say which one or what spec is required. In our household we have adapters for the following devices:
Nexus 4
Nexus 5
Nexus 7 (both versions)
Nexus 10
Different chargers have different specs and I don't know whether this is all important. Can I use any of these chargers with their cables (as I think the watch cable is rather short too)? I don't want to damage the watch using the wrong power adapter. I'm in the UK.
I got my watch yesterday and today I broke the plastic hinge on the charging port cover.
It's not completely broken thankfully just bent over, be careful they are not very strong.
2 hours to fully charge
It takes me 2 hours to fully charged (from can't switch on at all till showing 100%)
I am using the Samsung Note 3 Original Charger with the original Sony Cable provided.
Anyhow, this is my second time charging my watch.. have to monitor....
I used usb cable to charge my SW3, power-on from 0% to 100%. It took me almost 1 hour. At the beginning, the percetage was aurgemented very quickly. But at the end it took 12min from 99% to 100%
Calvin Gross said:
I used usb cable to charge my SW3, power-on from 0% to 100%. It took me almost 1 hour. At the beginning, the percetage was aurgemented very quickly. But at the end it took 12min from 99% to 100%
Click to expand...
Click to collapse
it is normal, the last percents are charged slower, that phase is called "topping off", uses low and/or pulsed current
It doesnt mater beacuse usb can power 5v devices so you can charge it ..... I would prefer the charger of nexus 5
5V, 3amps
the Snapdragon 400 has Quick Charge 2.0 that can draw as much as 3 amps. My samsung galaxy note 3 charger is only 2 amps, but already charges the watch fairly quick.
kimbap said:
stupid design , its not easy to put the cable into the mini usb port
Click to expand...
Click to collapse
I'll take the difficult port with the ability to charge with a cable I almost certainly have close by any day. I would love to have Qi charging, but when I'm overusing my watch at work or on the go and need to charge, no problem. I have a micro-USB cable close by. I wouldn't have a Qi charging station with me at all times.
I use a right angled cable, makes it much easier to pop the cable into the port. And those people who have broken the cover or are having difficulty, are you gorillas or something?
TheeDesecrator said:
I'll take the difficult port with the ability to charge with a cable I almost certainly have close by any day. I would love to have Qi charging, but when I'm overusing my watch at work or on the go and need to charge, no problem. I have a micro-USB cable close by. I wouldn't have a Qi charging station with me at all times.
Click to expand...
Click to collapse
This x10000. Just better placement would of been nicer.
Sent from my SM-N910V using XDA Free mobile app
Just thought of something else (that's actually on topic). I use the micro-USB that came with my Harmony 700 remote (I have 2 and both cables fit the same). It is actually a loose fit so it slides in and out of the Smartwatch 3 quite nicely. My girlfriend used to use it in her S3 but it kept popping out so I took it for my watch and found it works wonders. Since the SW3 seems to have a tighter fit micro-USB port, using a looser cable works nicely. It still stays in, but is so much easier to get in and out.