I bought my n7100 on taobao here in China, and it's a Korean version. I put my China Mobile sim card in, and it makes and receives calls, and text messages and can use wifi with no problem.
The only thing is the mobile data doesn't work. I rooted and tried tweakker, and HiNet, to reset my APN and MMS settings, but that didn't work. My phone still thinks I'm roaming.. it displays
this message "Data Roaming, You have lost data connectivity because you let your home network with data roaming turned off".
I've also tried updating the APN and MMS settings manualy with information i've found on the web.
I've googled and searched this forum and I can't find much. I thought it would be an easy APN settings fix but it seems not to be...
I took my phone in to the local China Mobile store they couldn't fix it. I took it to a local android expert here and they didn't know what to do.
Any ideas would be greatly appreciated.
If you bought a Korean Note 2, you don't (shouldn't) have an N7100. I also purchased one through Taobao.
You should have an SHV-E250S, E250L, or E250K. Which one do you have? Check the baseband version under Settings > About device page.
No matter what, you're going to be limited to 2G only with China Mobile.
You're right, It's SHV-E250S, and I'm fine using the 2g in China on China mobile, but I'd just like to know how..any help?
Baseband Version is E-250SKSVLJK
Try removing all modifications to your APN settings.
Next, go into Settings > More settings > Mobile networks > Network mode and change it to GSM only. Also make sure that Data roaming is not selected. Run a new scan for network operators while you're in there to refresh your APN settings to the right ones.
In data network mode I only have 2 options "3g only" or "LTE Preferred" I have it on 3g only. I have now unchecked data roaming, but I don't see any place to scan for network operators. I have included a few screenshots here, sorry i don't know how to insert them.. http://tinypic.com/r/2198djn/6 http://tinypic.com/r/24dhfmx/6 http://tinypic.com/r/2zof98w/6
Now it's obvious why you don't have data. Is this the stock Korean ROM? Are you rooted?
I can point you to a decent ROM that will fix all of this, provided you have the patience to fix it. It's relatively easy.
Yes it seems to be the stock Korean ROM. I am rooted using http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 I'm more than willing to flash another rom. I've put about 20 hours into this so far, I imagine I can muster enough patience to finish it
Once they give us a damn Korean Note II section, this kind of information will be a lot easier to find.
Try this ROM for now, it's the one I've been using for a few weeks and I love it.
Link source: http://koxda.com/thread-98683-1-1.html
ROM Download: http://pan.baidu.com/share/link?shareid=149494&uk=3355956772
Password: koxda.com
Thanks a lot the rom (715mb) is downloading now, I have tried to flash ROM's on my old galaxy nexus, and on this note II, but I never succeeded, can you please link me to a good guide, on how to flash this rom? thanks.
Odin is included in the download. If you're using Windows 7 you may or may not have the drivers for the phone, and can grab them out of the All-in-one Toolkit. Just installing the toolkit should install the drivers necessary.
http://forum.xda-developers.com/showthread.php?t=1923956
The ROM you're downloading has two files and two pictures, as well. Open the pictures and follow along. All you have to do is click two buttons, select two files, then hit start. It WILL wipe your phone.
I installed that rom you suggested, I went into settings and did GSM only, and had it automatically find my network (china mobile) selected it, rebooted, and still it says i'm roaming so there is no connectivity... any more ideas?
Can you try somebody else's SIM?
There's no reason you should not be getting service unless something is not right with your SIM or phone.
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
my gf will be home from work in a couple hours, I can try her sim card then.. my sim card was cut by me for my old iPhone.. is it possible or likely that the phone can still make and receive calls, but that somehow data connectivity was affected by me cutting the card? also one guy at the phone fixing store tried his sim card (from another company) and internet worked fine he said..
dadroidda said:
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
Click to expand...
Click to collapse
China mobile have various sim plans, from local to province to national. Are you using the sim in the same city in which you bought it? If not and you don't have a national plan, it could be why the phone is showing roaming. In China going from one province to another is already considered roaming unless you have a national plan. This is from my experience back 2 years ago. Also, you best check at a China mobile shop if you have data activated, gprs/edge is not activated by default, you need to ask them to do it.
I would advise you to switch to China unicom as they have 3g/hspa which is much faster than china mobile.
Sent from my GT-N7105 using xda premium
For clarfication, I am in Hainan, and the card is from hainan. I use the same sim card in my galaxy nexus without any problem. I tried my gf's card just now, it didn't say any problem with connectivity, and did not display roaming.. And it shows the G symbol (for 2 or 3 G I assume), and has up and down arrows next to it.. but it doesn't actually work for browsing the web or using apps over the data network.. I even reset all the APN settings and let it automatically find the China Mobile network, but it didn't help.. what if I try to set the APN settings manualy? and any other ideas??
Showing the G symbol is GPRS, which is 2G. You will not get 3G on the N7100, N7105, or Korean model Note 2 on China Mobile.
Sounds like you need a new SIM card. You can try to set the APN manually to make the data work with hers. I've never had to set an APN manually and I've used many phones here with all 3 carriers, so it's a bit odd to me. No clue why your card doesn't work, but since hers is working fine, it's definitely not your phone.
For the record, her card displayed G, but even after messing with settings, I couldn't get it to have working data network..
Today I bought a new card, and had it officially cut to size, put it in the note II and it's still telling me no data connectivity due to i'm roaming.. i'm so frustrated
edit: after restarting a few times and trying to automatically make it register on china mobile .. it worked on the 4th attempt.. it still displays data roaming, and I had to enable data roaming... but now it works, even though it says i'm roaming?? wtf
Ive the same problem with my Korean galaxy note 2 all voice service work perfect but when I tried to turn on data it says insert Usim Card to access network please help
Hi All,
I've trawled and searched but cant find anything specific to help me resolve my issue:
I have a Note 8 with 3G (GT-N5100) which I purchased from overseas as the 3G versions are available in Australia.
Since first receiving it I've had issues and had no support from the supplier. Initially it was locked in Factory Mode which meant Rooting and flashing the device. Once this was fixed I went out and bought a Mobile Data SIM to take advantage of the reason I bought it from overseas. However I cannot get any mobile data access.
I have tried the following:
Getting a new SIM
Have the carrier re-provision the service. This has been tested in a Note 10.1 and is working fine.
Tried different firmware.
Updated the APN's to no avail.
And today updated to 4.2.2
But I still have the following issues under device status:
Network: Unknown
Signal strength: -85dBm 14 asu
Mobile network Type: UMTS:3
Service State: Out of Service
Roaming: Not Roaming
Mobile network state: Disconnected
My Phone Number: Unknown
IMEI: 004999 and some more numbers so there is an IMEI
IMEI SV: 01
When I swap SIMs to different carriers the Data APN's change to match the carrier, so it looks like the SIM reader in the device is picking it up. I also have the signal strength meter in the top left.
I'm sure it probably related to the device not being sent out in an active state (ie Factory Mode) and will need to have a setting turned on to enable the modem, I just cant find a suitable reference to doing this.
Thanks for you help.
Simon
Looking further into it, as its showing UMTS 3 something is not quite right here.
I believe that I should be on UMTS 5 which is for Telstra Australia and using the 850Mhz network band.
What controls this and how do I change the bands?
** Further reading suggests that I need to change the CSC. After following a number of articles it looks like I cannot select the XSA CSC within the German ROM. I'm assuming I'll have to wait for a different country to become available that has Australia in it, does this seem correct or can I add CSC information without having it in the distribution file?
Hello everyone , I'm from Morocco and I need help with my device's Mobile Data.
To begin with, I've got an S4 mini 19190 3G variant, I installed a cyanogenmod ROM, it's a cm13 version, android 6.0.1. I'm using a TWRP recovery.
I've had a cm12.1 before and had the same exact problem: I'm always stuck on EDGE network .
I've gone to the settings, and made sure to choose 3G in the preffered network type.
My APN setting are correctly configured.
I've tried forcing the device to choose WCDMA by going to Phone Info. Choosing the WCDMA option disables Mobile Data and calls, with emergency calls enabled only.
Choosing the "WCDMA preffered" option doesn't change anything, it's still on EDGE.
I've looked for a solution, and noticed that some people had a problem with IMEI number, I've checked it, it's the same as the one on the back of the phone.
Anyone got any idea on how to fix this? Thank you .
Are you sure that your area has any WCDMA connection? Can you check with another phone?
Yes, I've already had H+ connection on the same phone but with a different version of the ROM, and my father has H+ working perfectly on his SGS5. I didn't try with another phone, I'll try and see if the problem comes from the SIM.
Omg Thank you! Why didn't I think of that! (How stupid of me) I tried my SIM card on a different phone (that had H+ working on it) and it went on EDGE network, and I chose WCDMA only and the connection was lost. There is a problem with my SIM card, I'm going to contact my service provider to fix this
Thanks Again!!
Hey guys, apologies if this has been asked before or if this is a silly question.
I recently bought an Asian Lg G3 d855. The software version is D85510e-GLOBAL-COM.
The phone is working fine apart from not having any 4g connectivity. I have went into settings and tried to change to GSM/WCDMA/LTE auto but it doesn't connect to 4g and switches back to GSM/WCDMA auto as soon as I exit the screen.
I have also went into the hidden menu, to LTE ONLY, RAT selection and tried to change it there but still no 4g. If I choose "LTE only" I lose my signal completely.
I have also went into band selection and chosen band 20, as this is the LTE band for my network in the UK (O2). It says success when I click on it but still no 4g.
My question is, is it possible to flash a European software version and would this enable the 4g?
Or is there any other way to enable 4g on this phone?
Thanks in advance!