Develop Bugs

what am I doing wrong?

I tried to install that paranoid android rom.I keep getting an error 7. it says no target device found. I've tried 1.9 .4, 1.9 .5, 1.9.6 and now 1.9 .7. It looks like an awesome rom but I can't install it. I get the same error with the cm 10. Presently I'm running the vicious ROM (jellybean). I wipe everything before trying to install the ROM but nothing works. I can install the maguro version with no problems other than I don't have phone service. I want this ROM bad and need some guidance.
Mr. Keith

How are you trying to flash the ROM? In recovery?
Sent from my Nexus 7 using xda premium

El Daddy said:
How are you trying to flash the ROM? In recovery?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yes, clockwork mod. I've also tried to manually do it in recovery, still get the status 7 error. I tried the supersu mod, no success. I have the Verizon gnex. This is week 2 of failed attempts. Do I have to start with a stock rom first?

Hope you are getting roms from Verizon thread not i9250

atifsh said:
Hope you are getting roms from Verizon thread not i9250
Click to expand...
Click to collapse
This.
The reason why you didn't have service with a maguro ROM is because that is for the gsm version.
You want the toro builds. Hopefully you can get your radio back.
if not you'll have to flash the stock Google image.
Sent from my Nexus 7 using xda premium

If you mean status 7 error, I have that with my Vibrant and have to change to a different version of clockworkmod. Try flashing an older version of CWM in fastboot.

eksasol said:
If you mean status 7 error, I have that with my Vibrant and have to change to a different version of clockworkmod. Try flashing an older version of CWM in fastboot.
Click to expand...
Click to collapse
This is likely the OP's issue. There are just too many incompatibilities with the newer recoveries. If you stick with 5.5.0.2 (for maguro), and 5.5.0.4 (for toro), you will see that you will have significantly less issues...

I have a Verizon galaxy nexus with paranoid rom all you do is go back to stick ics and use recovery to flash and it might get stuck in boot screen just take out battery and put back in and should just start up
Sent from my Galaxy Nexus using xda app-developers app

Sucess!!
Thank you, thank you, all of you. I finally installed the rom last night and its truly awesome. I didn't know that rom manager allows you to revert to older cwm versions. That did the trick. I now have some catching up to do.
Thanks again,
Mr. Keith

PA 3.99 Not Working on TMo Note 2 Help!

I am able to flash the rom successfully using CWM Recovery, but when the Rom starts up, it does not recognize any network or mobile data. I have flashed back to stock TW Rom, and it all works fine. I would love to give this rom a shot, but I would rather be able to use my phone. Please let me know how to get service and mobile data using this rom on my TMo SGH-T889 (Galaxy Note II). Thanks!

Nolan22 said:
I am able to flash the rom successfully using CWM Recovery, but when the Rom starts up, it does not recognize any network or mobile data. I have flashed back to stock TW Rom, and it all works fine. I would love to give this rom a shot, but I would rather be able to use my phone. Please let me know how to get service and mobile data using this rom on my TMo SGH-T889 (Galaxy Note II). Thanks!
Click to expand...
Click to collapse
Switch to TWRP recovery

Anu6is said:
Switch to TWRP recovery
Click to expand...
Click to collapse
Thanks for the reply! Why will TWRP allow me to use paranoid android?

Nolan22 said:
Thanks for the reply! Why will TWRP allow me to use paranoid android?
Click to expand...
Click to collapse
As far as i've seen from other posts, some versions of CWM cause issues with the baseband when flashing ROMs
TWRP does not have this issue.

Anu6is said:
As far as i've seen from other posts, some versions of CWM cause issues with the baseband when flashing ROMs
TWRP does not have this issue.
Click to expand...
Click to collapse
After installing TWRP on my TMo Note 2, I flashed PA 3.99 + GApps and it seems like everything is working fine. I have data and phone connectivity!
Since Paranoid Android was not working with CWM, does that mean that there might be certain ROMs that will not work with TWRP?

Nolan22 said:
After installing TWRP on my TMo Note 2, I flashed PA 3.99 + GApps and it seems like everything is working fine. I have data and phone connectivity!
Since Paranoid Android was not working with CWM, does that mean that there might be certain ROMs that will not work with TWRP?
Click to expand...
Click to collapse
I've not heard of any problems with TWRP (that does not mean they don't exist), also the issue with CWM only seemed to appear after a certain update (can't recall the number). Older version work without issue.

So I guess I spoke a little too soon. I was able to get data and cell connectivity, but it only lasted a couple hours and then disconnected. Any idea what is happening?
Sent from my SGH-T889 using xda app-developers app

Nolan22 said:
So I guess I spoke a little too soon. I was able to get data and cell connectivity, but it only lasted a couple hours and then disconnected. Any idea what is happening?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Try the note2 thread...it could be a device specific issue.

Unable to flash anything

Hi Guys This is not new to me, but what I missing,I have a galaxy s3 from at&t, I flashed to many roms before,but now I try to go to 4.4 and I can't I get error 7 and msd 5 no found android with a red triangle in the chest ,even the, I when back to stock 4.11 rooted and install recovery. What I done till now : the friendly guide for the error 7, toggle the the restriction in the recovery options still the same problem, even the OTA update from At& can't be installed. Is driving me nuts any Help ? thanks.:good:

Are you running the latest recovery? 4.4 ROMs require the latest TWRP or CWM.

audit13 said:
Are you running the latest recovery? 4.4 ROMs require the latest TWRP or CWM.
Click to expand...
Click to collapse
Sorry to take to long to get back ,You where right, I believed that I had the last ,now is working fine thanks a lot I did flash to 4.4 ,
now no WiFi, I'm working on it

chi3sol said:
Sorry to take to long to get back ,You where right, I believed that I had the last ,now is working fine thanks a lot I did flash to 4.4 ,
now no WiFi, I'm working on it
Click to expand...
Click to collapse
Could it be the modem that you're running? Did Wifi work on previous ROMs?

I got it working, but start geting froze and buch of isues, did flash it again and then after flash the google app the screen turn black and the phone won't boot , I did went back to stock everything is fine
Is any way to check if some aystem file is mising
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

What ROM are you trying to flash?

I fix it thanks
Sent from my GT-P3110 using xda app-developers app

audit13 Thanks a lot

No wifi after update

I successfully updated my Nexus 7 to 4.4.3 and it was working great until last night the Wifi just stopped working. It will not search for wifi, or if it does let me turn it on it won't scan or find anything. I did flash a new kernel to it earlier, but it was working fine. I tried to reflash 4.4.3 and it just fails using fast boot, or adb sideload. I have tried searching the forum, but since 4.4.3 just came out it seems that I am the only one that I can see with this issue.
I also did a factory reset using TWRP but still nothing.
Details that may help are as follows:
Nexus 7 (2013)
Rooted w/ Franco Kernel ( unless it will reflash the stock )
TWP 2.7 installed
Any help would be appreciated. I will keep working on doing a factory restore and then reflashing back to 4.4.3 and see if that works.

Pilz474 said:
I successfully updated my Nexus 7 to 4.4.3 and it was working great until last night the Wifi just stopped working. It will not search for wifi, or if it does let me turn it on it won't scan or find anything. I did flash a new kernel to it earlier, but it was working fine. I tried to reflash 4.4.3 and it just fails using fast boot, or adb sideload. I have tried searching the forum, but since 4.4.3 just came out it seems that I am the only one that I can see with this issue.
I also did a factory reset using TWRP but still nothing.
Details that may help are as follows:
Nexus 7 (2013)
Rooted w/ Franco Kernel ( unless it will reflash the stock )
TWP 2.7 installed
Any help would be appreciated. I will keep working on doing a factory restore and then reflashing back to 4.4.3 and see if that works.
Click to expand...
Click to collapse
Custom kernels have to be remade for 4.4.3
Don't use any for now
Sent from my Nexus 7 using XDA Premium 4 mobile app

rap3rman said:
Custom kernels have to be remade for 4.4.3
Don't use any for now
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This.
Anyone using a customer kernel needs to wait until the kernel is updated to 4.4.3.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app

Pilz474 said:
I successfully updated my Nexus 7 to 4.4.3 and it was working great until last night the Wifi just stopped working. It will not search for wifi, or if it does let me turn it on it won't scan or find anything. I did flash a new kernel to it earlier, but it was working fine. I tried to reflash 4.4.3 and it just fails using fast boot, or adb sideload. I have tried searching the forum, but since 4.4.3 just came out it seems that I am the only one that I can see with this issue.
I also did a factory reset using TWRP but still nothing.
Details that may help are as follows:
Nexus 7 (2013)
Rooted w/ Franco Kernel ( unless it will reflash the stock )
TWP 2.7 installed
Any help would be appreciated. I will keep working on doing a factory restore and then reflashing back to 4.4.3 and see if that works.
Click to expand...
Click to collapse
At the very least you need to flash the stock 4.4.3 boot image if that's where you're at now. I would also flash the system image just to be safe and to make sure you clean up any leftover files from the custom kernel, If there are any.

This patch fix WIFI for me
http://dl-1.va.us.xda-developers.co....zip?key=q2JwQJCSmgrvN42LvgV5Pg&ts=1401912320

wantabe said:
At the very least you need to flash the stock 4.4.3 boot image if that's where you're at now. I would also flash the system image just to be safe and to make sure you clean up any leftover files from the custom kernel, If there are any.
Click to expand...
Click to collapse
I was stupid and updated the kernel without thinking, and as others have sad that is obviously the issue. This is what happens when you are sleep deprived and have full time summer classes.
I did a reflash of everything. For some reason my Nexus is really slow to accept new software. When I flashed 4.4.3 to it again it failed, and I went to bed because it was late. The next morning I went to fix it and it was booting up just fine, although because it accepted the reflash I had to re set up my apps which is no big deal.
Thanks again for the help, I will learn how to fix these things on my own someday.

Pilz474 said:
I was stupid and updated the kernel without thinking, and as others have sad that is obviously the issue. This is what happens when you are sleep deprived and have full time summer classes.
I did a reflash of everything. For some reason my Nexus is really slow to accept new software. When I flashed 4.4.3 to it again it failed, and I went to bed because it was late. The next morning I went to fix it and it was booting up just fine, although because it accepted the reflash I had to re set up my apps which is no big deal.
Thanks again for the help, I will learn how to fix these things on my own someday.
Click to expand...
Click to collapse
I'm glad you got it working again! I personally had to learn the hard way not to be flashing kernels or any other images when I had one eye open. I keep copies of all the unzipped factory images on my computer and over the last few years have managed to grab images from the wrong folder more than once. ; ) Using the sdk it was never a big deal straightening it out but still!

Boot Loop after trying to Flash Cyanogenmod 11 through AutoRec?

Hello,
I am very new to rooting, and just rooted my Sprint LG G2 with 4.4.2 KitKat through IORoot 25 and then used AutoRec as my TWRP. I then downloaded Cyanogenmod11 from its website onto my phone, and tried to flash install it through AutoRec. However, when I try to install the CM11 ROM, I get the "MD5 not found" message, and when I try to reboot after this, my phone goes into what I think is Bootloop (the LG home screen continuously turns on for a couple seconds, then stops for a split second, and then turns back on for a couple seconds). Fortunately, I am was able to hard restart my phone by holding Power and Volume Up together while this screen is on, and I was able to restore my phone with the backup I made, and my phone is now working fine with the stock ROM. Has anyone else had this problem before, and if so is there a better way for my to install custom ROM, and/or fix that MD5 message? Does anyone know what that MD5 message means?
One other note, I have been doing some reading and I currently have ZVC radio. I'm not sure what this means exactly, but would this make a difference?
Thanks!

If you are on 4.4.2 cm won't work on that version yet
Sent from my LG-LS980 using XDA Premium 4 mobile app

secret.animal said:
If you are on 4.4.2 cm won't work on that version yet
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Interesting, thanks. Are there any ROMs that work for 4.4.2 that people have been using, or am I pretty much stuck with the stock ROM until CM is updated?

Cloudyfa has some in the G2 android development forum. There are some others that will work with sprint.
http://forum.xda-developers.com/showthread.php?t=2687613
[INDEX][REPO][AIO] LG G2 - ROMs | Kernels | MODs | Recoveries [UPDATED][9 June 14]
Has some info in it also
Sent from my Nexus 7 using Tapatalk

secret.animal said:
If you are on 4.4.2 cm won't work on that version yet
Click to expand...
Click to collapse
Hi, would you mind explaining further why it wont work, coz i have the exact problem that LGGuy83 is/was experiencing (i used autorec too and cm11 gives me an lg logo boot loop) and this is the closest thread to getting an answer

What radio are you on? Zv8 radio is required.
Sent from my AOSP on Grouper using Tapatalk

secret.animal said:
What radio are you on? Zv8 radio is required.
Sent from my AOSP on Grouper using Tapatalk
Click to expand...
Click to collapse
thanks for ur reply,
Im not sure what "radio" version, but i know its updated to VS980-26A
anyway i sorted the problem by using the cm11 version on this link
http://forum.xda-developers.com/showthread.php?t=2702958
i simply downloaded the one here and installed, (skipped all the steps and just put it in the internal memory and flashed it)
Now its working well. ill let you know if any problems arise.