hi all,
i live in Pakistan , i have note 2 T889V version for wind, it is unlocked but in pakistan its not registering any SIM cards or network. please help me what to do ???????? im on 4.3 T889VVLUCMK4 version, please help me what to do, i tried to unlock it by *#197328640# method but no help
We're still missing some information.
Did the phone work back in Canada? Did you buy it online and just don't know?
Could it be blacklisted? (http://www.protectyourdata.ca/check-the-status-of-your-device-in-canada/ is the Canadian Wireless Telecommunications Association's IMEI check page.) And yes, those databases are international.
What does Settings / About phone say? Is your IMEI still valid? Which baseband are you using?
The *#197328640# service menu unlock won't work on the 4.3 stock ROM.
Hopefully you haven't messed anything up yet. Back up your NV items now.
Or check your APNs too.
Going by his "not registering" vs "no data" I'd say his APN settings aren't the problem (yet).
plzzzzzz
It was sent as a present. No its not blacklisted and was unlocked. Baseband is T889VVLUCMK4 . What is nv ????
Help Plz ?
Any response plz ???????
kamran95 said:
Any response plz ???????
Click to expand...
Click to collapse
You will need to downgrade your phone to 4.1.1 or 4.1.0 in order to use that code to unlock the phone. It will not work on 4.3 as mentioned before.
Related
i have the AT&T Samsung Galaxy S3 SGH-I747. the phone is already unlocked so i know it should accept foreign sims but it doesn't recognize any sim i put in it. so far ive used 3 different simple mobile sims and none of them have worked. i called AT&T to find out if my IEMI was blocked or blacklisted but they said no, the phone should be working perfectly. plus weird thing is, i get the signal bars next to the battery as if the sim is working but it still says "No Sim. Insert Sim Card"
the phone is rooted so i was wondering maybe that has something to do with it? the phone was working perfectly fine until i rooted it. the specs are:
Android Version: 4.1.1
Baseband Version: I747UCLEM
Kernel Version: 3.0.31 - 274808
Build number: JRO03L.I747UCDLK3
please i am very desperate to get it working by tonight. does anybody know why my galaxy s3 won't recognize any simple mobile sim put in it? is there software im missing or updates i need? i already tried unrooting my phone, no luck.
Onye said:
i have the AT&T Samsung Galaxy S3 SGH-I747. the phone is already unlocked so i know it should accept foreign sims but it doesn't recognize any sim i put in it. so far ive used 3 different simple mobile sims and none of them have worked. i called AT&T to find out if my IEMI was blocked or blacklisted but they said no, the phone should be working perfectly. plus weird thing is, i get the signal bars next to the battery as if the sim is working but it still says "No Sim. Insert Sim Card"
the phone is rooted so i was wondering maybe that has something to do with it? the phone was working perfectly fine until i rooted it. the specs are:
Android Version: 4.1.1
Baseband Version: I747UCLEM
Kernel Version: 3.0.31 - 274808
Build number: JRO03L.I747UCDLK3
please i am very desperate to get it working by tonight. does anybody know why my galaxy s3 won't recognize any simple mobile sim put in it? is there software im missing or updates i need? i already tried unrooting my phone, no luck.
Click to expand...
Click to collapse
Who is your network provider? ATT or simple mobile?
Do you still have an imei on your phone under settings?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Bruce Lee said:
Who is your network provider? ATT or simple mobile?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
the network provider is Simple Mobile!
yes the IMEI is still under settings
Onye said:
the network provider is Simple Mobile!
yes the IMEI is still under settings
Click to expand...
Click to collapse
I hate to ask the question but are you sure you had the phone unlocked and if so how did you do it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Bruce Lee said:
I hate to ask the question but are you sure you had the phone unlocked and if so how did you do it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
yes the phone is unlocked. maybe i forgot to mention this earlier but it was using a simple mobile sim card perfect before i rooted it. i called AT&T international and they gave me the unlock code after i asked. i didn't need it tho because they told me if it wasn't unlocked, after i put the foreign sim in, it would prompt for the unlock code but the phone never prompts for one, just says "No Sim insert Sim card", something along those lines. further more i was informed that if it wasn't unlocked, it would say "unrecognizable sim" instead of "no sim". the fact that it says "no sim" means it won't read the sim card. the thing is no matter what sim card i put it (i tried 3 or 4 different ones) the phone still says "no sim"
i tried changing the modem to every single one compatible with the SGH i747 model and nothing helped. i tried changing the modem to a Tmobile modem because i know simple mobile uses Tmobile radio towers but that didn't help at all. i deleted all the cache and unrooted the phone but that didn't help so i rerooted it again. i don't know im just extremely frustrated right now. i've spent hours on the interenet and called AT&T international countless times to try and fix it but they always tell me its the sim cards fault but i know its not because i've tried it in other phones and they work. i'm just looking for a miracle here.
oh i did try to flash a custom rom and kernel but it didn't work and i received an error message and rebooted it without tampering with the rom and kernel again. maybe that has something to do with it?
Try doing a kies factory restore mate.
Sent from my SGH-I747M using xda premium
I have the same situation, after doing this:
Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....
Now it does not ask for the code unlock when i insert the t-mobile sim card, it shows error mm#6 or its says, sim card not allowed cannot conect to the network.
Hey OP, how did you solve this issue?
Rooted Galaxy S3 No Sim
Hi, I have exact same situation. I have an unlocked S3 originally locked to Telus. I got it rooted and lost the unlock -- it only reads Telus/Koodo sim card. Anybody help please?
PS: S3 shows the signal, however does not recognize the SIM!
hongzegao said:
I got it rooted and lost the unlock -- it only reads Telus/Koodo sim card. Anybody help please?
Click to expand...
Click to collapse
See this thread to unlock:
http://forum.xda-developers.com/showthread.php?t=2014982
post-mortem said:
See this thread to unlock:
http://forum.xda-developers.com/showthread.php?t=2014982
Click to expand...
Click to collapse
Tried this approach and never worked (since it was unlocked using network unlock code already).
thanks anyway
You unlocked using a code, but you lost the unlock when you rooted the phone?
please help!!
xmanberserker said:
I have the same situation, after doing this:
Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....
Now it does not ask for the code unlock when i insert the t-mobile sim card, it shows error mm#6 or its says, sim card not allowed cannot conect to the network.
Click to expand...
Click to collapse
i have the same problem but after pressing [6] Network Lock on the menu it shows "MENU NOT EXIST PRESS BACK KEY"
please help!
mohammedaamir said:
i have the same problem but after pressing [6] Network Lock on the menu it shows "MENU NOT EXIST PRESS BACK KEY"
please help!
Click to expand...
Click to collapse
You have to be on completely stock 4.1.1 for this to work...
Same Problem
Sadly to say I have the same problem but on a new Samsung Galaxy Note 3 N900V. I bought it online and it was supposed to be factory unlocked but it doesn't work on Fido, koodo, or bell; so I am not sure if it is factory unlocked. It says No SIM on all three sim cards. I tried rooting and it is still the same. I don't know what's wrong but I tried contacting Verizon who is the carrier of the phone but you can't get help unless you have a phone plan with them. And then I want to be using this on koodo and they won't help you because the phone is not from them. I am going crazy, anyone know how this can be fixed.
I do not have "[4] NW Lock NV Data INITIALLIZ"
xmanberserker said:
I have the same situation, after doing this:
Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....
Now it does not ask for the code unlock when i insert the t-mobile sim card, it shows error mm#6 or its says, sim card not allowed cannot conect to the network.
Click to expand...
Click to collapse
my phone does not have "[4] NW Lock NV Data INITIALLIZ"
bogy1001 said:
my phone does not have "[4] NW Lock NV Data INITIALLIZ"
Click to expand...
Click to collapse
Are you running a completely stock 4.1.1 ROM?
SGH-I747 not Registering to Network AFter *#197328640#
audit13 said:
Are you running a completely stock 4.1.1 ROM?
Click to expand...
Click to collapse
I have Sgh-i747 AT&T unlocked by the service code now its not asking for any unlock code but phone is not registering on network in uae .
Any one have the same issue please reply
Help
post-mortem said:
See this thread to unlock:
http://forum.xda-developers.com/showthread.php?t=2014982
Click to expand...
Click to collapse
i need help my galaxy s3 isn't reading the sims card or has the service bars.. its from tmobile please help i have it rooted and thats when the problem started
niki10oxo said:
i need help my galaxy s3 isn't reading the sims card or has the service bars.. its from tmobile please help i have it rooted and thats when the problem started
Click to expand...
Click to collapse
What ROM was on your phone? Is it the i747 or i747m? The thread you linked is for the international version of the Note 2.
Hi all, I bought a new Galaxy Note II overseas in Malaysia in February. It is an original set fully network unlocked. I have tried using Vodafone New Zealand SIM card in it but to no avail. I tried flashing new modems and stock firmwares, ariza patch, backup and restore IMEI before and after flashing. My serial numbers and IMEI numbers are still the same and are matching to what is on the box.
If I insert a Malaysian SIM card it works on roaming mode since I am back in NZ, however if I insert a NZ SIM card and try to connect to the local network it says 'Unable to connect,' calling and messaging only results in 'Not registered to network.' And it only allows me to make emergency calls. My firmware is XXDMB2, baseband is ariza, kernel is Perseus.
I would be grateful for any help.
mark.r22 said:
Hi all, I bought a new Galaxy Note II overseas in Malaysia in February. It is an original set fully network unlocked. I have tried using Vodafone New Zealand SIM card in it but to no avail. I tried flashing new modems and stock firmwares, ariza patch, backup and restore IMEI before and after flashing. My serial numbers and IMEI numbers are still the same and are matching to what is on the box.
If I insert a Malaysian SIM card it works on roaming mode since I am back in NZ, however if I insert a NZ SIM card and try to connect to the local network it says 'Unable to connect,' calling and messaging only results in 'Not registered to network.' And it only allows me to make emergency calls. My firmware is XXDMB2, baseband is ariza, kernel is Perseus.
I would be grateful for any help.
Click to expand...
Click to collapse
Have you checked the Mayalsian phone model supports NZ operator frequencies?
pjfriend said:
Have you checked the Mayalsian phone model supports NZ operator frequencies?
Click to expand...
Click to collapse
Sorry, I forgot to mention that this is an International N7100 and I am getting full signal here in NZ using Nz sim card
Sent from my GT-N7100 using xda app-developers app
Just a sugestion to you, root the phone or install a pre-rooted ROM from drketan and then install Galaxy SIM Unlock to check and be sure that the phone is fully network unlocked and also not SIM restricted.
To check the SIM restriction make sure that under Details -Accepted MCC/MNC - it is writen "all" and not some numbers like 5021x were x can be any number.
Under the next line I expect your phone to have Network Lock -unlocked, because you could use any SIM and make SOS calls, but if the above line is showing some numbers instead of "all" that might be your problem.
It is worth checking this because the aplication is free to check the status of the locking.
My new Note 2 was locked, I got the official unlock code from my carrier, entered the unlock code, the Network Lock was showing as unlocked but the SIM restriction status was still showing as locked to my carrier , under Accepted MCC/MNC I had my operator network code instead of "all".
I paid 3 euro and unlocked my phone fully with the Galaxy SIM Unlock, small price for a full unlock if your phone is rooted.
Good luck
Hi mendo, thanks for the suggestion. I ran galaxsim and I will post a screenshot. I am leaning towards the serial number being generic 0. Flashing Dr Ketans rom didnt help but thanks for the advice.
Sent from my GT-N7100 using xda app-developers app
mark.r22 said:
Hi mendo, thanks for the suggestion. I ran galaxsim and I will post a screenshot. I am leaning towards the serial number being generic 0. Flashing Dr Ketans rom didnt help but thanks for the advice.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
The Serial Number is showing 000000000000 on mine as well, this is not an issue it must be a bug in the tool.
Use some other tool or in Settings- About Device - Staus - Serial Number to display the S/N if you want to make sure that it is the same with the one from the box.
The Product Code should be GT-N7100xxxyyy, where xxx is the HW version and yyy is the CSC (country sales code) for the country/carrier.
This Not Active product code, could be the result of your problem and it might signal that your nv_data.bin and md5 files don't match.
I found an old post for a Galaxy S phone where changing the phone code or modifing the nv_data.bin is an issue and the SIM won't register.
I am sure that there are more topics about this but I'll post the link for the Galaxy S issue where you can start investigating more.
http://forum.xda-developers.com/showthread.php?t=780509
The rest looks OK and your phone looks fully unlocked.
Here is a N7100 topic about the product code.
http://forum.xda-developers.com/showthread.php?t=2045278
tried galaxy s/s2/s3 csc changertried galaxy s/s2/s3 csc changerCheck Fus is the only apk that will show the product code of your device with no need for root.
Unfortunately the apk doesn't work for the original purpose but at least it reads your product code.
Also it looks that the md5 checksum file is not autogenerating anymore if you edited the nv_data.bin and deleted the md5 file.
You need to restore the original bin and md5 file from an original efs backup.
I've just noticed that in your product code I can still see the CSC code as BTU.
Here is some info on the CSC and a free tool right at the end of the post if you need to change it, but it needs root and it will wipe your phone.
The apk is "galaxy s/s2/s3 csc changer".
http://droidviews.com/2012/how-to-change-csc-in-samsung-galaxy-phones/
Good luck, but I think you are in trouble and maybe only Samsung official service might be your salvation.
Wipe your root and install an official ROM before sending it to Samsung with the "product code missing" fault.
You may wish to hide the imei number as that is the one unique number that gives your phone an identity.
Sent from my GT-N7105 using xda premium
Product code is not active no matter what. I edited the nv_data.bin, made a backup of it, and did not delete the md5 file. I'll restore it and send it to Samsung service center. Thanks for the help brother, would've donated if possible but I'm a broke uni student
http://forum.xda-developers.com/showthread.php?t=2045278
Editing the nv_data.bin will make the md5 original file useless because the checksum is different and you can't generate a valid md5 file anymore to match a modiffied nv_data.bin file.
Copying/Restoring the original nv_data.bin and original md5 files from a backup and set the permissions right, as in the Galaxy S topic might help.
Hello, did you solve your problem? I'm facing a similar issue with my N7100, I got the same message not registered on network and my sim isn't recognized. How did you fix it?
my IMEI is correct, I got exactly this problem
thnaks for help
I bought a roger's locked noteII from canada but the owner told me that it cant get gsm network so it can works as a wifi tab...
Is there any way to tell me can I repair it myself softwarely
Or I must go hardwarely change the sim card slot ????
I neeeed help please
no one can ??
help me please
More info...
Did the previous owner tell you why the device won't get a signal ??
Is the device damaged ??
If not...you can carrier unlock the device to use with the ATT network...
There are numerous threads that cover these steps...g
Edit:
Start here for carrier unlock...
http://forum.xda-developers.com/showthread.php?p=34661189
Once you succeed with unlock.
.you'll need root and recovery to flash a radio image....and set your APN for the proper network..
Do some searches....you'll find everything you need....g
Noticed your other thread about changing the SIM holder...
That's likely not the issue as stated above....g
thnx very much i'll tell u about the news
please help me
the servicemode screen become black no any choices after i played in it roughly
could it be solved ????
i flashed the original rogers rom but invain
Hello! Help is needed!
SGH- I747 Android 4.4.2, I747UCUFNE4 without the Russian language.
4.4.1- sews through ODIN, the error came at the end of the firmware and the phone will not boot.
Then set 4.3, everything works, except for cellular communication, IMEI - zero \ zero.
Question - how to restore IMEI or will only service center?
Thank you in advance for your help.
P.S. English is not my language, sorry for the spelling.
Installed home modem, which originally stood, and restore IMEI. But the phone is not registered to a network, it requires PIN unlock network, although firmware, worked in our network.
Question - how do now unlock?
So the phone used to work on your network and now it doesn't? Is the phone asking for a code to sim unlock the phone?
audit13 said:
So the phone used to work on your network and now it doesn't? Is the phone asking for a code to sim unlock the phone?
Click to expand...
Click to collapse
Hello! Before flashing the phone I worked in our network, and now writes - "SIM network unlock PIN". It is necessary to Android 4.4.2
It Fixable? I read that you can remove the unlock through Android 4.1.1, but it does not put.
Thank you for your response.
Once the phone is on 4.4.2, you cannot unlock the phone for use on other networks unless you can get a code from AT&T or buy a code.
audit13 said:
Once the phone is on 4.4.2, you cannot unlock the phone for use on other networks unless you can get a code from AT&T or buy a code.
Click to expand...
Click to collapse
OK. Thank you.
hi guys
i want modem not2 GSM
to repair (not registered on network)
baseband version
n7100xxufb1
can any one help me please
alshfat said:
hi guys
i want modem not2 GSM
to repair (not registered on network)
baseband version
n7100xxufb1
can any one help me please
Click to expand...
Click to collapse
Searched for available networks manually??
Gurkanwal Chauhan said:
Searched for available networks manually??
Click to expand...
Click to collapse
i do it search munally it still (not registered on network)
when im run *#06# give me imei 004999010640000
it is different my original IMEI mobile not2
What ROM is on the phone? Phone shows correct imei when you dial *#06#?
audit13 said:
What ROM is on the phone? Phone shows correct imei when you dial *#06#?
Click to expand...
Click to collapse
Phone shows correct imei when you dial *#06#? NO different
What ROM is on the phone? 4.4.2
Is it possible the phone had been blacklisted? Tried other sim cards in the phone? Phone used to work with the sim card? Phone supports the cell carrier frequencies?
alshfat said:
Phone shows correct imei when you dial *#06#? NO different
What ROM is on the phone? 4.4.2
Click to expand...
Click to collapse
EFS partition probably, if you flash the official stock ROM for your country and that didn't fix your IMEI, then probably an EFS partition problem.