I was just roaming around on internet and i found this
http://www.flipkart.com/sandisk-ult...rive&ref=d9987edb-9203-4dce-8907-fc7fd5dbc890
I a pretty handy & the best thing is it has OTG inbuilt in the drive.
Have a look at all photos.
Just posting it here because i find it handy to use & also dosent needs any otg cable!!:good:
Does need USB OTG modules and USB OTG Helper app though
Someguyfromhell said:
Does need USB OTG modules and USB OTG Helper app though
Click to expand...
Click to collapse
yey!!
but almost all use cm now days!
Related
Greetings Guys, I bought an USB OTG Cable, which works great on mouse,keyboard and pen drive.
My only ambition is to get it working with a Mouse and Keyboard at the same time, so I can use my mobile as a portable netbook like for work while im outside of home.
I have at the moment an USB OTG Cable, and a low power mini mouse and portable keyboard also an USB Hub with two ports, which can use external power source.
The thing is my note can see each alone, cant see the HUB and the devices connected, even with the external power connected to the hub, what I can do to solve this? thanks
Install USB OTG helper app (needs root), you can try to get some debug info from there.
Check this: www_leicke_eu/en/products/DS40538. I found it while looking for a usb hub that will permit me to charge my note 10.1 when using otg cable with mouse. Just replace _ with dots.
uhi711 said:
Check this: www_leicke_eu/en/products/DS40538. I found it while looking for a usb hub that will permit me to charge my note 10.1 when using otg cable with mouse. Just replace _ with dots.
Click to expand...
Click to collapse
but how does this fit to the N700? is their an adabpter for the plug
---------- Post added at 08:36 PM ---------- Previous post was at 08:31 PM ----------
fearkillerr said:
Greetings Guys, I bought an USB OTG Cable, which works great on mouse,keyboard and pen drive.
My only ambition is to get it working with a Mouse and Keyboard at the same time, so I can use my mobile as a portable netbook like for work while im outside of home.
I have at the moment an USB OTG Cable, and a low power mini mouse and portable keyboard also an USB Hub with two ports, which can use external power source.
The thing is my note can see each alone, cant see the HUB and the devices connected, even with the external power connected to the hub, what I can do to solve this? thanks
Click to expand...
Click to collapse
Have being looking for the same thing for a very long time. Dind't find anything like that and ended up with bluetooth keyboar and mouse.
Did you find anthing else?
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
You'll need to buy a USB HUB (Get a powered one to future proof all your USB needs, you can get a USB 2.0 Hub pretty cheap). This will allow you to hook up at least 3 USB's to the OUYA. The Micro USB won't work for things such as hard drives or HID devices.
In the future, please use the search function before posting as this has been talked about in many other posts.
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
I have a 4-port hub and it works fine connecting 1 storage and 3 other usb devices
I had this issue where only one harddrive could be used and If you have a harddrive with 2 partitions ouya wont mount it. Luckily I found an app called usbotghelper which does all the above I mentioned plus read and write and ext3 support. I wish it would get submitted to the ouya store so I could use the paid version that will mount on startup.
Hello guys, I was wondering if you could help me out
I already have the phone (durr ) and the USB OTG Cable but my doubt is the following:
Can I have the USB OTG connected to the phone and to a Hub at the same time?
[btw:Being one of the ports of the USB Hub a charger and the other ones random stuff (such as mouse, keyboard and so on)]
matheusimmer said:
Hello guys, I was wondering if you could help me out
I already have the phone (durr ) and the USB OTG Cable but my doubt is the following:
Can I have the USB OTG connected to the phone and to a Hub at the same time?
[btw:Being one of the ports of the USB Hub a charger and the other ones random stuff (such as mouse, keyboard and so on)]
Click to expand...
Click to collapse
Pretty sure when in otg mode it will always be a power source and unable to charge but I could be wrong.
As the thread title states, I want to find out if the Wileyfox Swift support USB OTG? I have tried attaching a USB flash drive via the cable that used to work with my One Plus One that I had, but it does not respond when connected to the Wileyfox Swift. Any ideas? Thanks for any help!
Ill test it in 15 mins and get back to you.
I think I might have used OTG via TWRP recovery, but don't know about the ROM
Thanx for checking this. It would be great if there's a way to get this to work but I also wouldn't be surprised if the phone cannot support OTG.
It doesn't look like it is configured for OTG. It might be changeable via a custom kernel going by Chainfire's USB Host app.
I did not try the 'fix' in the second app as I don't have a current backup.
It might also not work because you have a wrong OTG cable since many microUSB cables won't work with the Swift
You might want to try using externally powered usb hub or Y shaped OTG cable to power the flash drive. I don't have any at the moment to try. Most likely it will turn out that the microUSB on the phone doesn't have the wiring to provide power (as it was for Nexus S but can be used if powered externally).
Maybe anybody can make OTG support in kernel and it will work with Y cable like on Nexus4?
r25txe said:
I did not try the 'fix' in the second app as I don't have a current backup.
Click to expand...
Click to collapse
seems like the 'fix' don't work...
h t t p : / / imgur.com/pY0zWOr
http://forum.xda-developers.com/showpost.php?p=65353312&postcount=84
cac2s said:
http://forum.xda-developers.com/showpost.php?p=65353312&postcount=84
Click to expand...
Click to collapse
Thanks for the update. As I stated in the beginning, I am not surprised that Wileyfox Swift doesn't support USB OTG. It's still a good phone despite this omission.
While the kernel that comes with it does not support USB-OTG, it is not impossible that a kernel with support could be built. The APIs are there, they just need instructions to call them.
I'm not too fussed about it, if it had no portable SD card support I would be annoyed, but having the card allows much of the usage cases of USB-OTG.
I am always reading to use a usb OTG to navigate in TWRP but if I use an OTG adapter I can't use the usb port for powering the stick? How is this going to work?!
skrippi said:
I am always reading to use a usb OTG to navigate in TWRP but if I use an OTG adapter I can't use the usb port for powering the stick? How is this going to work?!
Click to expand...
Click to collapse
There is a splitter for that, search on Amazon
Amazon.com
Or you can also make it yourself just need some soldering skills and few components
If you want to use more than one device (like USB and keyboard and mouse) then you will need a usb hub also.