Related
So I bought a car usb charger that claimed it was rated at 1 amp. Using both my blackberry and HTC oem usb cables it will only show up as a USB charger (500ma).
This is not exactly enough to charge the phone while using 3g, gps, full screen brightness, etc. I'm looking for a good confirmed 1 amp hardwire (not using a usb cable) car charger and home charger. I used my sisters Samsung charger (rated at 700ma) and it charged it quicker than with the OEM htc charger.
And I would like to try and get ones that are confirmed to show up as fully charging the phone. I would appreciate some insight
Sent from my PC36100 using XDA App
And now that I think about it,
I would like to be able to use my Amazon prime for a change, so amazon links would be nice
Sent from my PC36100 using XDA App
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
nhutpham said:
I went through a few different car chargers, so I can help you out here. I bought the Belkin car charger recommended here in another thread, low profile and rated at 1A, but my phone only recognized it as USB and charging was fairly slow, extended road trips using video recording and navigation while plugged in would drain my battery over time.
I used my friend's palm pre home charger and it worked very well, so I went on to Amazon and bought the "palm vehicle charger". The one I got in the mail (from Park Deals) was DOA, wouldn't turn on at all (I emailed Park Deals and they sent me a new replacement free of charge, didn't even have me ship back the defective one). I called the local radio shacks and found one in stock at $9.99 (radio shack isn't carrying palm anymore, so the accessories are on closeout but hard to find in stock). Works like a charm, the phone recognizes as AC charging, the phone still charges while running navi or recording video.
My friend got a cheapo car kit on ebay, came with rubberized case, mount that fits the evo with the same case on, and a cheap unlabeled car charger with a bungie type cord. I tried this on my phone, my evo recognizes it as AC also, so I assume it would charge well if it's rated at 1A. I've seen several other cheapo car chargers rated at 1A as well.
Another thread here on XDA says that if you modify your charger/cable by altering the middle data pins you can get the phone to believe the usb port is plugged into the wall and draw full current from the charger. I tried covering the two middle pins with a piece of paper and plugging it in, but this didn't work for me. The other methods involved shorting the two data pins together, I didn't really want to waste a cable or mess up a charger and potentially my phone so I just bought a different charger. Another thread mentioned buying a specific rocketfish usb cable had a similar effect.
Click to expand...
Click to collapse
That was me on both accounts. Love my rocket fish cable. Bought the 12v/usb converter for the car and whether or not i use the pc or car to charge, it shows as ac charger on the phone. I use this cable on all my pc's as well as the usb outlet in my vehicle.
This is the charger that I bought from amazon. It shows up as charging from AC (instead of USB) charging. It's available for Amazon Prime for under $6:
The Motorola P513 micro-usb charger.
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
investinwaffles said:
Ok so I ended up with the Moto 513 charger as well (950ma rated)
http://www.amazon.com/Motorola-Vehi..._1_5?ie=UTF8&s=wireless&qid=1280759739&sr=8-5
But I cant find any AC chargers under prime that are 1000ma
Click to expand...
Click to collapse
this one works great. I have it.
Ok, so I found an OEM Nokia for the N97 that is rated at 1200ma. Is this safe to buy for my phone?
http://www.amazon.com/Nokia-Origina..._1_2?ie=UTF8&s=wireless&qid=1280760676&sr=8-2
Auction with more specifics of the charger:
http://cgi.ebay.com/NOKIA-US-AC-10U...ccessories&hash=item414e190fa7#ht_2800wt_1026
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
I'm charging with the scosche reviveII at 2.1 amps without any problems.
linhpham2 said:
There's a nokia micro usb charger for $6.99 available for Amaazon Prime. The model number is AC 6U. ASIN: B0030T0ULW
Click to expand...
Click to collapse
From this ebay listing it looks like the AC-6U is only a ~600ma charger:
http://cgi.ebay.com/NOKIA-CELL-PHON..._Accessories&hash=item5639f88b1c#ht_500wt_721
I think ill spend the extra few bucks on the 1200ma charger, I don't think ill have any problems (and i have the best buy warranty also so I'm not too worried).
linhpham2 said:
I'm charging with the scosche reviveII at 2.1 amps without any problems.
Click to expand...
Click to collapse
How fast does it charge?
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
linhpham2 said:
One the 2.1 amp port, the Evo only charges at 1 amp. The Evo doesn't charge any faster with this charger than any other 1 amp charger.
Click to expand...
Click to collapse
Gotcha, thanks for the info.
I just ordered a Rocketfish cable. We'll see how that works.
Would be nice if they made a Y-cable to get 1amp from 2 USB ports in a PC. I mean, I know they MAKE cables like this but I read somewhere that HTC phones were designed to still only charge at 500mAh even with one of those.
Dunno.
It depends on what you're using as a charging source. When usb charging on my home pc or car, it's AC charging at 1 amp.. But if I'm charging with my Energizer external battery, it's only USB charging at 0.5 amp. This is using the same usb cable.
iGo
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
I can attest to the Moto 513 working fine - it has served me very well on my Evo and the Treo Pro before it.
Unfortunately it is a big ass charger though - wish there was a good micro option.
How do u determine how much power its actually charging at or if its not using the full 1amp rating?
_______________________________
Sent from my EVO 4G
robroy90 said:
Would anyone happen to know what an iGo tip (A97) delivers? I am trying to rig up a custom solution that is hard-wired, but uses iGo tips so I don't have to use the cigarette lighter plug and I have the flexibility at the corner of my windshield to swap tips for different devices.
Right now, I have a 4-port USB hub installed under the dash that is 12v powered. I then use a proprietary iGo cable that uses a standard PC style USB connector on one end and then terminates into an iGo tip connector at the other end. That USB cable runs up to the corner of the windshield so I can swap tips at will.
If I use the iGo A97 tip on their cigarette lighter adapter, it seems to charge, but I am not sure at what rate. If I try to use the A97 tip on the USB hub, it charges for about 2 seconds, and then the light goes out. The Evo does not seem to like the custom arrangement, yet all my other micro usb devices do not seem to have any issues and charge just fine...
Thanks,
-Rob
Click to expand...
Click to collapse
Should pull 1A off the Igo
how do i determine if its recognizing a charger as ac versus usb? could this be rom specific? it seems to charge much faster with cyanogen than it did with damagecontrol
What is the best solution for quick charging the Galaxy Nexus in an automobile?
I have started to use 12-220 volt converter so I can use wall chargers.
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
ellisz said:
I have bought a few of the low profile car usb chargers but they were never recognized as an AC charge. Come to find out, it was the USB cable. I bought a usb charging cable from Amazon last week and it goes in the USB charger and the phone does not think it is a USB charge. I have not timed it but it is recognized the same as the wall charger.
http://www.amazon.com/gp/product/B003VYBCAY
Click to expand...
Click to collapse
+1 .. this solution has been working great for me, as well.
I've been getting 2.1A car chargers (look for ones for the iPad), most of the ones I had prior to this were 700mA or so and they can't keep up with my 1A phones. Be careful of dual port chargers advertising 2A, they may only be 1A each and may be "optimistic" about that rating. And don't worry about getting one rated for too much current, the Galaxy Nexus won't pull more than an amp no matter what the charger rating.
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
I've never run into a car adapter that looks like a USB port, including the VZW charger with a spare port or the cheap 2.1A chargers I got from Amazon. My guess is that a charger not built correctly and leaving the data pins open only supports ~500mA anyway. Even if that's not the case I have a moral objection toward buying a cable to fix a design flaw in another cheap product - but that's just me
Grant H said:
Some really good solutions here and thank you all for the help.
I'd really hate to use an inventer in my car just to maintain a clean install, so that really isnt an option for me.
Was really hoping to be able to use a off the shelf car charger with the correct pins to trick the GNexus into thinking that it was charging from a USB port, but the above solution should work well with using a socket USB charger.
Click to expand...
Click to collapse
I've got a charger similar to http://www.ebay.com.au/itm/USB-Car-...ccessories&hash=item4ab18358f4#ht_1638wt_1392
All I had to do was undo the screws at the top, put a bit of solder between the middle usb pins, and my phone recognises it as a AC source rather than USB.
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Grant H said:
What is the best solution for quick charging the Galaxy Nexus in an automobile?
Click to expand...
Click to collapse
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
I've heard that Motorola one mentioned a lot as a good one.
The nice thing about having the low-profile usb plug is (a) it is low profile, (b) I can use it to charge other devices. The charge-only cable is only about $4, so I had no issues buying it to work with this to charge as an AC charge over a USB charge.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
I have this one and it charges just like it does from the home outlet and its says "AC" charging. I bought another 8 for family and friends and they all love it.
I think I've figured out the disconnect, I've run into chargers that appear as a USB host which limits the charging to 500mA on previous phones I've had.
You guys are concerned about USB vs. AC charging mode. Of the chargers I've got, this one lists as AC while the rest as USB. However, the fact that the other chargers all work just fine keeping up with GPS+streaming music indicates that the USB vs. AC really has no bearing on the charge current delivered. I'd stay away from charge-only cables just because they'll get mixed in with your standard USB cables and you'll knock yourself out wondering why they don't work. On the other hand, if you really want AC in your battery info order the one I linked.
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
jdbower said:
What's much more important is the rating on the power source. The GN can pull up to 1000mA, if your charger is only rated for 800mA (like many car chargers) it doesn't matter if it's in AC mode.
Click to expand...
Click to collapse
makes sense.. the one I use has dual usb (1.0 and 2.1)
You went and gave me a project for the weekend, and once again science prevails over anecdotal evidence. I took each of my 5 chargers and hooked them up to a 12V power supply that measures current. I then recorded whether the charger reported AC or USB, for the ones with USB I modified a right-angle adapter to short out the data pins, and I measured the current. The contenders:
Verizon Wireless Dual Charger
XTG Dual Port Charger
Griffen Powerjolt Dual USB Charger
Griffen Portjolt Micro
CostMad Dual USB Charger
The VZW model was USB out the external port as I had tested before, however AC out the built-in cable which I hadn't bothered to test. It pulled 0.25A @12V via the USB port and 0.59A via the cable. Hmmm... A hole develops in my previous observation. While I had used this on a long car trip with no issues, it was via the built-in cable.
The XTG was new, I hadn't used it before as it's in the car I rarely drive. It reported USB and 0.22A. With the adapter to make it report AC it pulled 0.48A.
The pattern was set. I had expected the Griffen adapters to be built more appropriately but the dual charger reported 0.22A without the adapter and 0.42A with. I had used this without losing charge in the past so this was surprising to me, but it's possible I just wasn't drawing as much current because the screen was dimmer or something.
The compact Griffen adapter (which is great for a laptop bag, BTW) pulled 0.21A and 0.47A respectively.
The cheap CostMad adapter was the only one that performed well out of the box, both reporting AC and pulled 0.57A.
In theory, a perfect adapter should pull 0.42A. Anything more is waste, anything less means it's not keeping up. I have doubts about the Griffen 2x allowing for a full amp, but the VZW and CostMad chargers are pretty lossy. What's even worse is that I'm pretty sure the VZW charger is rated for 800mA (but I can't find an actual spec on it) which would mean that it pulled the most power for the least current. Not that this really matters unless you've got an electric car.
Sorry for misleading you earlier, I should have checked the other port of the known-good VZW charger and probably doublechecked the numbers on my other "known good" charger. Still hating cables that work for charging but not for data, I ended up modifying each of the chargers to short the middle pins (except for the VZW one). If I didn't have the soldering iron for this, I probably would have gone for some of these instead.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
CyberPunk7t9 said:
Make sure the charger has the IC (rapid) chip. I use this one:
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA
Click to expand...
Click to collapse
I'm using the same one and it works perfect. Charges even when GPS navigation is running.
Make sure you select Amazon as the seller though. I heard there are a lot of fake ones.
Grant H said:
There has got to be a standard car charger on the market with the middle usb pins already soldiered!
I found this on Amazon which advertises itself as a rapid charging device.
http://www.amazon.com/gp/product/B000S5Q9CA
Click to expand...
Click to collapse
+1 to those recommending this one. I have this exact model and it does indeed charge at the "AC" rate, about twice as fast as the "USB" rate.
TheKaz said:
I keep it in my car... i think I've heard on other threads that USB charging doesn't keep up with GPS (for Directions). Any verify?
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
The Motorola one will charge even when using GPS. I have a friend I bought one for that uses his GPS all day and loves the Motorola charger.
Any car chargers that anyone could point me to that charges as fast as a wall charger?
As it is right now, unless I have my screen off and no apps running it drains faster than the charger can put juice into it...
I'm just using an el-cheap-o aftermarket car charger.
Thanks!
JWhipple said:
Any car chargers that anyone could point me to that charges as fast as a wall charger?
As it is right now, unless I have my screen off and no apps running it drains faster than the charger can put juice into it...
I'm just using an el-cheap-o aftermarket car charger.
Thanks!
Click to expand...
Click to collapse
What I use is a cig to usb plug (cost me 10 bucks at walmart). Then I bring the cord from home that came with my phone and plug that into the USB to cig thingy. Works like a charm, I haven't noticed it charging slower than when at home.
JWhipple said:
Any car chargers that anyone could point me to that charges as fast as a wall charger?
As it is right now, unless I have my screen off and no apps running it drains faster than the charger can put juice into it...
I'm just using an el-cheap-o aftermarket car charger.
Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1331233635&sr=8-1
i bought one from t-mobile... its about $29 but its worth the price. I get charge speeds btw 850ma and 950ma when on idle
i have the oem cig to usb charger from Samsung i purchased it at best buy with a gift card lol, when i first got my galaxy tablet.
Just get any standard microusb charger rated at 1a (or 1000mAh ). I'm betting your elcheapo is .5a (500mAh).
Sent from my SGH-T989 using xda premium
I finally got around to ordering that Motorola charger on Amazon - works just how I wanted it to - thanks so much!
our device requires an official samsung charger to charge at full ac speed. there was an article on the xda front page last week about how to mod your charger to be recognized as official.
Sent from my Galaxy S II
jordanishere said:
our device requires an official samsung charger to charge at full ac speed. there was an article on the xda front page last week about how to mod your charger to be recognized as official.
Sent from my Galaxy S II
Click to expand...
Click to collapse
All I know is that now I can run my GPS with the screen on and still move UP in battery - before it would drain faster than the car charger would charge, so, I'm happy with what I have now.
Actually the problem is that some of the car chargers are not at 1amp output but less .75 or .85. Thats why your not really seeing an increase. The stock charger is at 1amp. I know AllGamer likes to use the Blackberry ones (which i believe are 1.5amps) Correct me if im wrong AllGamer.
So just look for 1 amp car chargers the cable doesnt matter itll hold whatever you attach it to.
So, no matter wht brand charger you have as long as you connect the two middle pins you will get full charge as long as the charger can put out 1000ma?
I really need a good charger for the car, right now i use a blackberry charger at work an it charges pretty fast. But i need to know how do i find the currect charge rate of a charger. Is there an app for that?
Get tmobiles car charger. Its faster than any others I've tried.
Sent from my SGH-T989 using Tapatalk 2 Beta-4
Can it be had on the cheap
Sent from my SGH-T989 using xda premium
Here it is ... cheap! $3.49 you dont get cheaper than that! =)
Charger
As I remember those chargers needed the center pins shorted to be recognized as AC.
Sent from my SGH-T989 using xda premium
Wareazy said:
Here it is ... cheap! $3.49 you dont get cheaper than that! =)
Click to expand...
Click to collapse
This charger doesn't keep up. I have one. It will still drain faster than it charges if you're running a GPS app with the screen on.
Does anyone have an experience with this charger from MONOPRICE
http://www.monoprice.com/products/p..._id=1082603&p_id=8858&seq=1&format=4#feedback
I need a great car charger and really dont want to spend to much money on it. Furthermore, if I am getting a 1+amp charger, as long as i am using the stock samsung charging cable then it shouldnt matter if the charger itself has D- and D+ shorted right?
Im assuming this is something standard on all usb CHARGING cables as appose to data cables.?
Dougshell said:
Does anyone have an experience with this charger from MONOPRICE
http://www.monoprice.com/products/p..._id=1082603&p_id=8858&seq=1&format=4#feedback
I need a great car charger and really dont want to spend to much money on it. Furthermore, if I am getting a 1+amp charger, as long as i am using the stock samsung charging cable then it shouldnt matter if the charger itself has D- and D+ shorted right?
Im assuming this is something standard on all usb CHARGING cables as appose to data cables.?
Click to expand...
Click to collapse
You want a good reliable charger at eBay pricing..... spend the money 1 time and be done with it. You could've already gotten the T-Mobile one and been done with it.
Sent from my SGH-T989 using Tapatalk 2 Beta-5
For those of you buying the USB 12V Cigarette adapters read this.
Basically if you use a data sync cord with one of those adapters, unless it shorts the 2 data pins together internally (probably not) the phone is going to think it's plugged into a computer and only charge at 500ma (max output for a computer USB port). The write up above explains to short the 2 data cables together (this is done internally with the main AC charger head) back towards the phone so it will charge at 1amp instead of 500ma.
You can buy this cable and just modify it as described. I bought this USB adapter so I could charge 2 things at once.
Let me get this clear.
All i need to look for when it is charging is AC mode. As long as it says that, it doesnt matter what i have or have not done to the cables, AC mode is AC mode.
The charger i am looking at getting is 2.1 amp (because it has a spare usb port...so 1amp per line) and when i plug it in and it says AC MODE then its good to go right.
I just bought a TMOBILE offical charger that shows AC MODE, so when it MONOPRICE charger arrives i can compare. If it doesnt work its another 5 bucks, if it does i can take the tmo one back.
But again i am just wondering are there any caveats to AC MODE, or is it that once AC mode shows that is all that matters.
I'd like to buy a new and extra cable (not the charger) to connect my device to my computer and charge it then as well.
Apparently this kind of cable, micro data usb, seems to be universal. Is it really so as I don't want to damage it if I buy a generic cable.
Any help me would be great
I was also wondering this because I would like to buy a much longer cable since my power outlet is far from my bedside table.
The cables are universal, so any length would work for charging (data transfer not guaranteed).
Actually they are not that universal. While I dont have any technical specs there are quite large differences.
eg a PC USB slot will only deliver 500 mA UNLESS certain pins are connected that allows the connected device to tell the PC that it can take more than 500 mA. They will look the same but 1 cable will only deliver 500 mA & a different cable could deliver 1000 mA.
Another cable might be wired up for delivering power only from a USB slot or from the wall adapter, but at the same time not be able to do any data transfer.
To be sure I bought an Htc official cable.
You could always just buy a usb extender. That way you can use it for multiple things.
USB cables
Sorry to revive a dead thread, but there is some unclear info in here that I thought I could clear up:
Micro-USB cables are universal in the sense that they will all fit and to one degree or another charge your phone. The combination of the charger and the cable, however can yield wildly different charge rates. If you want fast charging:
1. Look at the small print on your wall charger and see what current level it will output. You're looking for something 1 amp or higher. Some chargers will say something like 500ma, which is 500 milliamps or half an amp, and that's slower.
2. Consider buying a special "charging" cable. These cables use the USB power that would normally be used for data to charge the battery faster, and thus they won't work as data cables when plugged into your computer. Here's an example of a charging cable from Amazon:
http://www.amazon.com/Mediabridge-U...1367955673&sr=8-2&keywords=usb+charging+cable
Basically what you want to look for on your One V is in the power settings for the phone it should say "Charging (AC)" when you plug it in and *not* "Charging (USB)". With the AC setting you know you're getting as much charging power as you can get.
I use my old Blackberry charge/USB cable with my One V without issue.
same here lol
Sent from my One V using xda premium
martijn99 said:
same here lol
Sent from my One V using xda premium
Click to expand...
Click to collapse
Glad I'm not the only one!
hahaha i because of the short lenght of original cable and it makes an irritating noisy sound xD
Sent from my One V using xda premium
martijn99 said:
hahaha i because of the short lenght of original cable and it makes an irritating noisy sound xD
Sent from my One V using xda premium
Click to expand...
Click to collapse
Yeah, I don't even use my HTC cable anymore. I originally stopped using it because I dropped my phone while it was plugged into it and it bent the connector. However, I HATED how short it was!! Then, I noticed that my Blackberry cable had the same end on it, and I've been using that for USB tethering, and I use my Samsung bluetooth earpiece charger to just charge my One V. lol
Oh, and I use the HTC USB to wall socket adapter to plug in my ecig. XD
ah nicee!
Sent from my One V using xda premium
zombiegirl2010 said:
Yeah, I don't even use my HTC cable anymore. I originally stopped using it because I dropped my phone while it was plugged into it and it bent the connector. However, I HATED how short it was!! Then, I noticed that my Blackberry cable had the same end on it, and I've been using that for USB tethering, and I use my Samsung bluetooth earpiece charger to just charge my One V. lol
Oh, and I use the HTC USB to wall socket adapter to plug in my ecig. XD
Click to expand...
Click to collapse
I unintentionally bought some blackberry ones to have in my car, at my PC, at work, etc and they work great for me. I am just really careful about the wall adapter output because using my dad's tablet charger with micro usb killed my wife's optimus t.
Anyone know of a good source to get an OEM cord that will properly charge in the car? Tried monoprice and a couple others and they appear to be charging but don't actually charge.
sent from my hammerhead
Anyone?
sent from my hammerhead
http://forum.xda-developers.com/showthread.php?p=51825009
Sent from my Nexus 5 using Tapatalk
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
raptir said:
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
Click to expand...
Click to collapse
if u turn off ur screen & only listen to the directions, it will charge, but if u want to see where ur going, the battery will remain flat. power in = power out.
raptir said:
If you are trying to charge from a USB port built in to your car, you are only going to get a 500mA current which isn't enough to charge your phone if you're using navigation or anything.
For a charger that will work well in the car, look at the Anker PowerIQ charger.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Both ports will charge Android devices or iPhones at the full rate.
Click to expand...
Click to collapse
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Ben36 said:
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
If the port is a charging-only port, sure. But most are charging + data ports.
I have a car charger but for some reason the cables I've gotten don't charge properly, even though it looks like it is.
sent from my hammerhead
Ben36 said:
Whaaaaaat?? Cars can put out more than 500ma
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It varies dramatically from car to car, even from year to year. Generally, if it doesn't look like it's charging much, if at all, it's because it's not putting out enough amps, period.
ldubs said:
I have a car charger but for some reason the cables I've gotten don't charge properly, even though it looks like it is.
sent from my hammerhead
Click to expand...
Click to collapse
How have you determined that it is the cable and not the charger? It is much more likely that a charger would be defective than a cable.
raptir said:
How have you determined that it is the cable and not the charger? It is much more likely that a charger would be defective than a cable.
Click to expand...
Click to collapse
because I had an OEM cable working fine in the charger, but the tiny clips at the end got bent down and now it doesn't stay seated properly in the charging port, so I tried a couple of places (Amazon, Monoprice) to get a replacement OEM charging cable - I have a dual port charger and have tried both ports with the replacement cables. They appear to charge (battery icon spins, using Mahdi Rom) my phone but when I get home the battery level is lower than when I plugged it into the car. Hence my quest to find an OEM charging cable, with the proper tiny clips so it stays properly seated, that I can use in the car. Monoprice cable fits nicely in the charging port, but doesn't seem to charge the phone. Not sure if there are data-only cables made but these were advertised as charging/sync cables...
Well, Monoprice has a lifetime guarantee so if you received defective cables they will replace them. I use both the Monoprice Premium cable and the standard cable and have no issue with any charger.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=4868&seq=1&format=2
The only issue I run into is that one of my chargers is an iPhone charger and thus shows as "Charging (USB)" when you go to the Battery menu. That means they will only charge at 500mA which is not enough power to keep the phone running as a GPS. This Anker PowerIQ charger plus either of the Monoprice cables charges my phone without any issue (displays "Charging (AC)") while using the phone as a GPS.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Edit: Also, when you say "OEM cable" do you mean the one that came with your Nexus 5 or the cable that came with your charger (since both are provided by the manufacturer of the equipment)? If it's the one that came with your Nexus 5 it is probably just that you received a defective cable since the Nexus 5 cable is a standard sync + charge cable. If it came with your charger it may be that your charger uses the iPhone spec and needs a charge only cable to properly charge an Android phone.
raptir said:
Well, Monoprice has a lifetime guarantee so if you received defective cables they will replace them. I use both the Monoprice Premium cable and the standard cable and have no issue with any charger.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=4868&seq=1&format=2
The only issue I run into is that one of my chargers is an iPhone charger and thus shows as "Charging (USB)" when you go to the Battery menu. That means they will only charge at 500mA which is not enough power to keep the phone running as a GPS. This Anker PowerIQ charger plus either of the Monoprice cables charges my phone without any issue (displays "Charging (AC)") while using the phone as a GPS.
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Edit: Also, when you say "OEM cable" do you mean the one that came with your Nexus 5 or the cable that came with your charger (since both are provided by the manufacturer of the equipment)? If it's the one that came with your Nexus 5 it is probably just that you received a defective cable since the Nexus 5 cable is a standard sync + charge cable. If it came with your charger it may be that your charger uses the iPhone spec and needs a charge only cable to properly charge an Android phone.
Click to expand...
Click to collapse
I meant the cable that came with my Nexus (or maybe it came with my wireless charger). Car charger didn't come with a cable, I got this one:
http://www.amazon.com/gp/product/B006SU0SX0/ref=wms_ohs_product?ie=UTF8&psc=1
Like I said, it was working fine with the original cable until the tiny pins got bent and it no longer stays seated in the charging port properly. I have the 3 foot version of that monoprice cable.
ldubs said:
I meant the cable that came with my Nexus (or maybe it came with my wireless charger). Car charger didn't come with a cable, I got this one:
http://www.amazon.com/gp/product/B006SU0SX0/ref=wms_ohs_product?ie=UTF8&psc=1
Like I said, it was working fine with the original cable until the tiny pins got bent and it no longer stays seated in the charging port properly. I have the 3 foot version of that monoprice cable.
Click to expand...
Click to collapse
Then the only thing I can think of is that you received a defective cable. I use this charger with the monoprice cable and have no issue:
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
raptir said:
Then the only thing I can think of is that you received a defective cable. I use this charger with the monoprice cable and have no issue:
http://www.amazon.com/Anker®-Dual-P...&qid=1397483180&sr=8-6&keywords=anker+poweriq
Click to expand...
Click to collapse
I chatted with monoprice and after I sent them a link to the car charger I'm using, they found it has both a 2.4 amp and a 1 amp slot. Said to try the 2.4 amp slot and see if that helps. I'll report back...
ldubs said:
I chatted with monoprice and after I sent them a link to the car charger I'm using, they found it has both a 2.4 amp and a 1 amp slot. Said to try the 2.4 amp slot and see if that helps. I'll report back...
Click to expand...
Click to collapse
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
raptir said:
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
Click to expand...
Click to collapse
hmm that could be a problem. will check later and see what's what.
raptir said:
The 2.4A slot is designed using the Apple spec and won't charge the Nexus 5 properly. Once you plug it in check under the Battery menu. If you see "Charging (USB)" then it is capping at 500mA.
Click to expand...
Click to collapse
Actually it does charge the phone quite nicely with the monoprice cable. Maybe problem solved. It shows charging ac. I'll let it run for a few days and see how it is.
sent from my hammerhead
This is the best car charger period.
http://www.amazon.com/Motorola-Vehicle-Adapter-micro-USB-Charger/dp/B000S5Q9CA