Hello all.
Yesterday i was using my XDA App on my XZL and somehow the xda app mislead me to some Samsung subforum instead of the ZL original Android Development Forum where i surely clicked on that. Then i thought there was a new rom... downloaded and flashed with no errors inside NUT's Recovery and then it turned into a brick. So no response from my ZL no charging LED, there is no way to go into Fastboot or Flashmode. It will be always recognized as QHSUSB_DLOAD in windows.
What i tried is a tool for linux from here http://unlimited.io/qhsusbdload.htm and at the end it says qdl reset but its still bricked. So i dont know what to do anymore. Oh and i never Unlocked my ZL i just had Exsistenz 5.0.0 Rom installed on it.
What happens when you connect it with your pc, does your computer still recognize it as a phone? Did you try to use pc companion repair function?
when i connect it will be seen as QHUSB_DLOAD, PC Companion and SEUS dont see the because of that.
have you tried the reset button? press it and hold it in and you should feel one vibration after a few seconds....keep holding it untill it vibrates 3 more times and it should turn it off/reset it.
then try using flashtool.
Yeah i tried the reset button but its not working anymore its not even vibrating. It seems its complete dead.
there is one thing i could do, to rewrite the phone through QPST from qualcomm but i dont have the files for my phone, so i would need a backup from an c6503 from QPST
just a thought...there was a time or two when just pressing the rest button did not work for me, what i had to do was hold in the power button at the same time as pressing the reset. hold them both till you feel one vibration, keep holding till you feel 3. sorry if thats no help.
i Tried that but dont works too. Now i startet again ubuntu and did try the QHSUSB fix, so the ZL will be recognized as qualcomm modem blabla QDL mode that means qualcomm download mode. So when i do the qhsusb fix it will exit the qdl mode and try to reboot, but there are no partitions anymore on the phone so the phone enters again in QDL mode. When it exits QDL mode it will be connected as Qualcomm inc. in Ubuntu. at this time the Red led flashes for a few seconds until it gets back to QDL mode.
When the phone is unplugged and i press Power button one single time then the Led flashes 3 times Red, when i plug it in at the charger it flashes 1 time for maybe 1 second in Red, but doesnt start to charge. Then it seems to hang up so i need to press the reset button and it goes to QDL mode again, thats all i found out now. And sorry for my bad english
I hope some Dev could help me.
Now i found and Linux app called emmc_recovery which i can flash some .sin files some succesfull with no errors and some files abort. so i need an bootloader for my zl c6503 doesnt matter what file type it is. So how can i find one ?
Sorry, I can't help you. But there is a threat called Disaster Recovery. It's created by NUT, the dev who created the dual recovery for our phone. Since that threat covers ZL, Z and other Xperia-phones, many more people will read it. Maybe you can get help there:
http://forum.xda-developers.com/showthread.php?t=2229250
Sorry, but your phone is hard bricked. I experienced the exact same issue on my Xperia T. The only fix is through JTAG, or send it back to Sony and hope they replace it.
Sent from my Nexus 10 using XDA Premium 4 mobile app
Yeah i will sent it to repair center and it was my first and last sony phone. Will go back to HTC.
Vendetto said:
Yeah i will sent it to repair center and it was my first and last sony phone. Will go back to HTC.
Click to expand...
Click to collapse
So you somehow through your own ineptitude or ignorance attempted a flash of Samsung software on a Sony phone and it bricked.....and you blame Sony? Interesting.
TAL333 said:
So you somehow through your own ineptitude or ignorance attempted a flash of Samsung software on a Sony phone and it bricked.....and you blame Sony? Interesting.
Click to expand...
Click to collapse
Where i ever blamed sony for my fault ?? And where i am ignorant ? You seem a typical troll.
If the XDA App would lead me to to right forum this would never ever happen. I flashed thousand times and never had a brick with my HTC One X. You can say what you want but the quality of Sony is far behind.
In my case, I flashed a custom Xperia T kernel from a dev who modified S1_BOOT and the bad flash put my phone in the QHSUSB_DLOAD mode. I tried absolutely everything and nothing worked, the phone was completely bricked. Now, if this can happen with a bad flash from Sony, imagine the havoc cross flashing device manufacturer's causes! Samsung software on a Sony platform? It's deader than dead.
Related
Ok after my sony ericsson xperia play did the software upgrade while on the charger, it will not boot back up!!
Not sure what happend, but when you press the power button, it only vibrates once but will not boot back up!
It just shows a black screen!!!!
I have sent it in to the shop and we are stuck as to how to get it on.
You can not even get into the boot loader screen!
Its been a week, and i don't know what the hell to do!!!
Some one please help!!!!
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Yes it dose, the tech guy and me have tried to do so, however the computer sees the device but dose not know what it is, however even when the files are finished it sitll dose not boot up!
jacklebott said:
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Click to expand...
Click to collapse
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
It dose not light up blue, but it dose not go into the recovery screen at all, in fact when you press the power button, gives a small vibrate and the screen is still black!
Also when you put it on the charger the LED light is green, really frustrated.
However, I am new at this, like I said only had the device for a day, and this happened after I did a software update, so I am not sure what a CWM means, kindly clarify, think of giving instructions not just to a newbie, but to some one that has no clue what is going on! LOL sorry man I really am new to all of this, I just want it to work, so kindly provide me with step by step instructions that you would give to a five year old child.
Hmm... that's interesting. A CWM is a custom recovery. Green light when plugged in means its charging. It sounds almost like your phones LCD is not receiving a signal anymore, if that's the case, seeing as you wouldn't see anything on the screen in order to even do a recovery, I don't see a lot of options here. If its brand new, then its under warranty, take it back and exchange it.
Sent from my R800x using XDA App
This has nothing to do with your LCD =|.
It's sony's stupid software bricking the xperia play for no valid reason ; happened to me as well.
Only fix is to download Sony Ericsson Update Service and keep on retrying the software update after it fails ; This is not the Sony Ericsson Pc Suite ; Also try removing the battery for 30 seconds after 6-8 retries on SEUS - happened to me a few times after the original occurence since i was trying to get back to complete stock.
Thanks for the input, I was lost on how to help out on this one! I thought it was only bricking the rooted unlocked phones.
XperianceIT
sent from my Xplay R800X, using XDA App!
Thanks, so I need to use the update app from Sony Ericsson?
I will try it, however would it work after I flashed it ?
I did a few times and it took the flash files, yet still wont boot up.
XperianceIT said:
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
Click to expand...
Click to collapse
I wasn't trying to get him to use fastboot (blue light), I was saying to go into flash mode (green light)
Its still not booting up and the pc is now saying it dose not recognise my device!!
What to do????
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
Connect it to your PC with USB, Then go to support Zone in Pc Companion then select Phone software update and click Repair and follow the instructions, it worked for me when pc companion decided to brick me...
EDIT: Or you could always Flash 2.3.4, tut here: http://forum.xda-developers.com/showthread.php?p=20151540 just follow the first two posts, I believe it will work if Flashmode is still working (The tut will tell you how to get into there)
correct me if I have said anything wrong, was in a rush.
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
When you connect the phone to the pc does the led stay green, if it does that's called flash mode , keep.on tryimg seus to flash the phine, this is not included in pc companion and is separate software
Sent from my R800i using XDA App
This happened to me to, so you are saying I should use SEUS to update over and over until it works?
---------- Post added at 09:32 PM ---------- Previous post was at 09:27 PM ----------
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Should I do an update or the reset and update option in SEUS?
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!
hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..
ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!
Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Sv: [Q] My sony ericsson arc s is stuck on sony logo and pc doesn't recognize it
yazanallahham said:
Hi Guys
I tried to install Ice Bean rom on my device using CWM and when it asked to reboot my device
my phone stuck to Sony Logo and doesn't respond to anything...
my pc doesn't recognize it (as if nothing is connected to my pc)
when i hold back button and press on power button it only blink blue for 1 sec and led goes off
i tried to hold volume down button and press power button and nothing happened
only a vibrate for a sec then stuck to sony logo
battery is charged
i think i bricked it
how to workaround it please help
is there any option to get it back
maybe using Testpoint or i don't know since my phone is not recognized by the pc
please help
before u answer please read (my phone is not recognized by the usb cable) so i guess solutions using usb cables won't help
please help....:fingers-crossed:
Click to expand...
Click to collapse
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Destroyedbeauty said:
Your bootloader was unlocked before you flashed the specific ROM?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes it was unlocked using the SE method:crying:
yazanallahham said:
Yes it was unlocked using the SE method:crying:
Click to expand...
Click to collapse
I think your CMW is removed.
you have to flash kernel once again.
bjchettri said:
I think your CMW is removed.
you have to flash kernel once again.
Click to expand...
Click to collapse
how to flash it if my pc doesn't recognize my phone?
yazanallahham said:
how to flash it if my pc doesn't recognize my phone?
Click to expand...
Click to collapse
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
bjchettri said:
It's simple dude you have to go to bootloader mode. press and hold menu button untill you plugged your device into the pc/laptop.
Click to expand...
Click to collapse
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
yazanallahham said:
I already tried this and my pc still doesn't recognize it
nothing happens
my phone shows sony logo and vibrates only when i press power button
Click to expand...
Click to collapse
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
bjchettri said:
Then do a fresh installation through the flashtool. flash a official firmware and do the same procedure from the beginning.
Click to expand...
Click to collapse
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
yazanallahham said:
how can i use flashtool if my pc doesn't recognize my phone which means that the flashtool won't be able to recognize the phone too
?????
Click to expand...
Click to collapse
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
bjchettri said:
Oh, dude flashtool just need your device driver and you have to press back button untill you connect your phone on your pc and it also shown on flashtool which is included in procedure of flashing through flashtool and one thing PC not need to recognized your device because flashtool is the only one method to recover bricked phone. that's it .. if you got confused then please search on google you will find the solution.
Click to expand...
Click to collapse
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Hi yazanallahham
I have the same issue, could not find any solution yet, wondering if you have fixed your fone ?
yazanallahham said:
Dear bjchettri
I do appreciate all your efforts
I have to explain the situation just to make things more clear because it looks like you misunderstand me
when I connect my phone (in all modes "Bootloader, Fastboot, normal, recovery..etc) nothing happens on my pc
even in device manager (i'm using Microsoft windows) the system doesn't show any item for a new attached device or an item for an defined attached driver (which used to appear all modes)
the flashtool needs the system to find an attached device to communicate with (usually the attached device name looks like "android phone", SE android or something this (depends on ur phone brand, model)
now since my system doesn't find any device when I connect my mobile then the flashtool won't be able to communicate with my device (even if i tried to boot my device in all modes "bootloader, fastboot, normal, recovery) by holding specific buttons (menu or volumn down or back buttons)
and if you read my question you will see that i was asking if anyone knows any way to connect my phone using testpoints or something like this because i though maybe I can let my pc to recognize my phone using the testpoints method.
I'm not sure but if i could make my phone recognized by the pc then i will have like 10 ways to find the problem and fix it.
Click to expand...
Click to collapse
Is your bootloader unlocked?If its locked then try to fix it with SEUS not PC Companion downlod SEUS and try.
Sent from my Xperia Arc LT15i using XDA
Hello, I'm a noob at phone rooting/modding, so I don't know if my phone is dead or just bricked.
Basically, yesterday at some point in the afternoon my phone stopped working. I had charged and used it in the morning as usual. I did not use my phone for like 5 hours and when I tried to turn the screen on, nothing happened. I tried holding the button down, and nothing. I tried connecting it to the charger, but no charging light came on. So it seems that at some point when I was not using the phone it either died or froze in some way and it's now unresponsive (even to holding the power+vol button). To be clear, I was not flashing anything or modifying the phone in any way.
My phone is the ATT Ion updated to the latest official firmware with superuser installed. But I installed superuser almost a year ago and have had no problems since then.
Any help is appreciated!
wtfsnowman said:
Hello, I'm a noob at phone rooting/modding, so I don't know if my phone is dead or just bricked.
Basically, yesterday at some point in the afternoon my phone stopped working. I had charged and used it in the morning as usual. I did not use my phone for like 5 hours and when I tried to turn the screen on, nothing happened. I tried holding the button down, and nothing. I tried connecting it to the charger, but no charging light came on. So it seems that at some point when I was not using the phone it either died or froze in some way and it's now unresponsive (even to holding the power+vol button). To be clear, I was not flashing anything or modifying the phone in any way.
My phone is the ATT Ion updated to the latest official firmware with superuser installed. But I installed superuser almost a year ago and have had no problems since then.
Any help is appreciated!
Click to expand...
Click to collapse
Check if you can get into flashmode, if you can then you can flash stock firmware and then your phone should be good to go.
Sent from my GT-N7100 using xda premium
Mufrad said:
Check if you can get into flashmode, if you can then you can flash stock firmware and then your phone should be good to go.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
If this is how you get to flashmode, then no I cannot get to it: http://forum.xda-developers.com/showthread.php?t=1816396
My PC does not detect the phone. Neither does Sony PC Companion. All Windows recognizes is an Unspecified device called QHSUSB_DLOAD.
wtfsnowman said:
If this is how you get to flashmode, then no I cannot get to it: http://forum.xda-developers.com/showthread.php?t=1816396
My PC does not detect the phone. Neither does Sony PC Companion. All Windows recognizes is an Unspecified device called QHSUSB_DLOAD.
Click to expand...
Click to collapse
When you plug in your ion to the pc in flashmode does the led on your ion turn green? If it does then your phone does go into flashmode but your pc doesn't recognize it for some reason, download the new flashtool for xperia, install it, there will be a driver folder in flashtool directory, install all the drivers from it, then check again by connecting your ion to the pc in flashmode again and see if your pc recognizes it.
Sent from my GT-N7100 using xda premium
No the LED never comes on; neither when it's connected to the PC nor when it's charging.
wtfsnowman said:
No the LED never comes on; neither when it's connected to the PC nor when it's charging.
Click to expand...
Click to collapse
Ok ?
What did you do ?
Did you try to install any MOD or anything of that sort ?
Give some details and i will try to HELP
Like I said in my first post, I wasn't using the phone at all. I charged and used the phone for a couple hours earlier in the day, then I left it for like 5 hours without using it all, not even checking the time or anything. Then I tried to turn the screen on to check the time and it didn't come on. Held the power button to see if it was off or something, but no response. At no point have I installed any mods, CFW, or anything; other then almost a year ago when I rooted and installed superuser.
looks like hardware issue then
well if you didn't do anything then its an hardware issue most likely...try holding the power and volume up rocker for 10 secs..else you might have to visit the service center
I tried holding the power+vol button, but there was no response. I took it to the service center and they will ship me a new one. I assume it was hardware failure as well, since it just died so suddenly. Too bad I can't retrieve some photos and delete my synced passwords.
Same problem with my first XS,good that I had warenty and gave it back, even ppl from Sony didn't know what the problem is so they gave me a new one.
Sent from my Xperia S
Today i tried to apply a ROM called ultimate HD 4.0 or something. I installed it properly my phone told me so, but then it asked me to reboot (it said it was best to, so i proceeded), but when i rebooted it, my phone just got stuck on the boot screen. I've done a fair bit of research on similar things happening to other peoples Arc's, but all the answers have told the victim to connect ithe phone to their computer and re install the stock OS, but with mine since it doesn't boot up to the homesceen flashtool doesn't recognize the phone as being connected.
It was quite upsetting because i rooted successfully ,until that happened :crying:
Any and all hlelp will be definately appreciated i really dont want to spend money on repairing it because i know ill be charged more than its worth.
You're not supposed to boot up to homescreen download the stock firmware and prepare flashtool then connect the phone in flashmode (USB + back) when prompted. No need to switch phone on.
Sent from my X10 using xda premium
Yes....
To flash the stock firmware you need not require the device to boot..download the stock ftf and keep it in flashtool firmware folder....select thunder icon and select flashmode...select the firmware and select flash...when it asks you to connect... Power the device off and then press the flashmode key and connect the device.... Flashing will start automatically...wait till it says finished...
Happy flashing bro
Hit the thanks button..it does not cost you anything.
it's worth something for me...
sent from my Sony Xperia e dual