[Q][Acro S] going from 4.4. back to 4.1 - Sony Xperia S, Acro S, Ion

Hi,
I'm now on Kitkat 4.4 and want to go back to a 4.1 customs rom.
do I have to flash stock rom with flashtools or is it possible to install the zip with recovery?

hawk20 said:
Hi,
I'm now on Kitkat 4.4 and want to go back to a 4.1 customs rom.
do I have to flash stock rom with flashtools or is it possible to install the zip with recovery?
Click to expand...
Click to collapse
Flash stock based kernel with recovery using fastboot and then you can flash the custom 4.1 rom from recovery.
Sent from my LT28h using Tapatalk

Flash stock .96. For rooting flash .211 kernel, and then run Doomlords script and then install CWM before flashing the .96 kernel.
http://forum.xda-developers.com/showthread.php?t=2417672
For .96 kernel and .211 kernel Google is your friend.
My advise is for stock 4.1.2.
God luck!
May I ask why you want to go back to Jellybean? Have you tried Mekoo? I have flashed Jelly bean more than I can count (I can only count to ten ) after trying KitKat, but after I tried Mokee I have been satisfied.

I tried mokee, cm11, beanstalk. They are really good... In mokee is a little bit to much in chineese... But in all Roms i Miss the FM radio... So i think i will go back

I don't notice any Chinese in Mokee beside in TWRP, but with Google that's manageable. Running the latest 4.4.2 version. Will install 4.4.3 Nightly today. I don't use the FM cause my favorite channel is only on DAB.

Related

[Q] Forgot to flash the kernel before installing ICS beta rom with xperia arc

Hi all,
My phone is rooted and has an unlocked bootloader, but I tried to install this rom today:
MooDeD ICS ROM v.4.0 / xUltimate v7.0 Engine [ROM]
http://forum.xda-developers.com/showthread.php?t=1526717
But I forgot to flash the new boot.img (new kernel), wich I had to install using flashtool. Now I can't normally boot my Arc (I can understand why), but I also can't get into CWM recovery! So do I know have to flash the new kernel wich I had to do before.. or can I get Android 2.3.4 somehow back on my Arc? And if I flash the new kernel for ICS can I flash it back to the kernel for Gingerbread afterwarts? The new kernel is based on ICS beta btw.
I hope you can help me
Everything is working very well since I flashed the ICS kernel I am now running Mooded ICS rom v30.5 without any problems (few bugs in the rom, but overcomable)
Robinio94 said:
Hi all,
My phone is rooted and has an unlocked bootloader, but I tried to install this rom today:
MooDeD ICS ROM v.4.0 / xUltimate v7.0 Engine [ROM]
http://forum.xda-developers.com/showthread.php?t=1526717
But I forgot to flash the new boot.img (new kernel), wich I had to install using flashtool. Now I can't normally boot my Arc (I can understand why), but I also can't get into CWM recovery! So do I know have to flash the new kernel wich I had to do before.. or can I get Android 2.3.4 somehow back on my Arc? And if I flash the new kernel for ICS can I flash it back to the kernel for Gingerbread afterwarts? The new kernel is based on ICS beta btw.
I hope you can help me
Click to expand...
Click to collapse
Flash ICS kernel and try to boot
Thanks
krattos said:
Flash ICS kernel and try to boot
Click to expand...
Click to collapse
I figured that flashing ICS kernel and install the rom again worked when I had flashed the kernel I could get back into recovery again Thanks for your reply
does the DoomLord Kernel work on a ICS rom? Or does it has to be the ICS kernell by DoomLord?! on other words on ICS Roms the kernel has also to be based on ICS?
That's correct as far as I know has to be ics
Sent from my LT18i using Tapatalk
I don't recommend doomlord because it's a bit buggy, but there are plenty of usefull kernells. To make ICS work you will need ICS kernell
Sent from my LT18i using xda premium

[Q] Stock ICS to Custom 4.1 ROMS

Hey guyz got a very noobish question, didnt find any answer any other place...so im posting my question here...
Could i just flash any custom 4.1 roms like miui, aokp, cm10 and im on stock ics, rooted witch franco's kernal..? is it possible or i must have stock jelly bean inorder to flash these roms..?
Provided you have unlocked your bootloader. You can flash custom jelly bean ROMs from stock ICS..
I have a Sony Ericsson Neo V. I flashed Polish Blood Aosp ROM from Stock Sony ICS without any issues.
You can flash any version you want. It makes no difference what you currently run. Just wipe like normal and flash your day sired ROM.
As long as you wipe cache and data everything fine!
Sent from my Galaxy Nexus using xda app-developers app
moizsami said:
Could i just flash any custom 4.1 roms like miui, aokp, cm10 and im on stock ics, rooted witch franco's kernal..? is it possible or i must have stock jelly bean inorder to flash these roms..?
Click to expand...
Click to collapse
You do not need stock jellybean in order to flash a custom 4.1 rom like miui, aokp or cm10. All you have to do is pick a rom you like, make a backup, wipe the stock ics on your phone, flash the custom 4.1 rom/gapps of your choice, then restore your apps.

[Q] Touchwiz Based ROM to CM 11 / AOSP / AOKP Roms Flashing Question

Hi so im currently using DN3 Rom the 4.4.2 Based one and I enjoyed it. But just now since the stock camera was launched on the playstore I want my device to become cm11 or aosp based rom. So this is my question if I flash aosp rom isnt there any problems at all? And if I succeed to flash aosp could I get back to dn3 again with the same procedure or do I need to flash everything via odin? Thanks
dynamode said:
Hi so im currently using DN3 Rom the 4.4.2 Based one and I enjoyed it. But just now since the stock camera was launched on the playstore I want my device to become cm11 or aosp based rom. So this is my question if I flash aosp rom isnt there any problems at all? And if I succeed to flash aosp could I get back to dn3 again with the same procedure or do I need to flash everything via odin? Thanks
Click to expand...
Click to collapse
You don't have flash your phone using PC Odin but for changing your phones base from TouchWIZ to AOKP/AOSP you've to perform clean installation.

[Q] Noob questions about Kernel

Hi there!!
I'm about to unlock my phone bootloader, and i wanna know some things about kernels:
Can i "downgrade" the kernel. For example from a KitKat kernel to Stock (Jelly Bean 4.1) Kernel?
Can i use a KitKat Kernel in a Jelly Bean Rom?
If Kernel have CWM recovery, it still working even if ROM stop working?
I know that in Linux you can update to the lastest kernel in same distro and don't matters, but Android is "special"...
Now i've CWM for locked bootloader and it is installed in ROM instead in Kernel, then if ROM is damaged CWM can stop working. I think if is included in Kernel then don't matters what happen in ROM, but I want to be sure.
Thanks!!
I'm not really sure about question 1 & 2.
Answer for question 3:
Yes, the recovery should work even the rom is messed up.
Thats when bootloop happen .
Daniel_Lechu said:
Hi there!!
I'm about to unlock my phone bootloader, and i wanna know some things about kernels:
Can i "downgrade" the kernel. For example from a KitKat kernel to Stock (Jelly Bean 4.1) Kernel?
Can i use a KitKat Kernel in a Jelly Bean Rom?
If Kernel have CWM recovery, it still working even if ROM stop working?
I know that in Linux you can update to the lastest kernel in same distro and don't matters, but Android is "special"...
Now i've CWM for locked bootloader and it is installed in ROM instead in Kernel, then if ROM is damaged CWM can stop working. I think if is included in Kernel then don't matters what happen in ROM, but I want to be sure.
Thanks!!
Click to expand...
Click to collapse
1- Each rom has a specific kernel so if you want to install a kitkat kernel you can't install a JB rom so if you want to downgrade you can only downgrade the version of the kernel !!!
2-As I mentioned above you can't
3-Yes because the kernel is not damaged in your case so CWM will be working with no issues !!!
Thanks!!!, for now i'm still using a JB kernel with JB Rom. Waiting for a full working port of xLoud
Daniel_Lechu said:
Thanks!!!, for now i'm still using a JB kernel with JB Rom. Waiting for a full working port of xLoud
Click to expand...
Click to collapse
If You are going to unlock Your bootloader in future, do remember to backup Your TA partition.

[Q] Return from CM12.1 to a stock based rom

Hello
What is the best way to go from CM12.1 to a rooted, stock based rom? Like the DstrikerZ1KaiROM. Can I just flash it from recovery then flash the latest RockZ1L kernel for it?
Thanks!
kristof93 said:
Hello
What is the best way to go from CM12.1 to a rooted, stock based rom? Like the DstrikerZ1KaiROM. Can I just flash it from recovery then flash the latest RockZ1L kernel for it?
Thanks!
Click to expand...
Click to collapse
There are prerooted stock ROM as flashable zips here in this forum. Just scan the General Section and choose your preferred version. This would be the easiest option as long as you have an accessible recovery.
Without recovery (or when you want a non rooted genuine stock version) you have to use flash tool and download a stock firmware.

Categories

Resources