[Q] No OS installed on HTC ONE M8! Plz HELP! - One (M8) Q&A, Help & Troubleshooting

Hi everyone! I installed the stock google edition on my HTC ONE M8 last night using adb command. Then I get in TWRP recovery try to restore my previous backup that I made using TWRP. Then I got an "restore failed". So, I get in wipe, but I chose the advanced wipe instead of factory reset because my old defy+ is this. I'm so stupid.... I deleted the system. Now I have no OS installed on my phone. I googled earlier that people were saying that using ADB sideload will work. I get in recovery and pressed the sideload but the progress bar just keep going for like 8 hours straight !!! What should I do?
Also, my phone has unlocked boot loader and S-OFF. I rooted my phone before I did the wipe.

Use adb push <nameofrom>.zip /sdcard and then flash that

EddyOS said:
Use adb push <nameofrom>.zip /sdcard and then flash that
Click to expand...
Click to collapse
Okay. But when I connect my phone to my PC. It makes the notification sound but did not recognize it. And when I typed in "adb devices" there is no devices attached.

It'll only show when booted into TWRP (so flash that in fastboot if you have to), and that's when you push the file

EddyOS said:
It'll only show when booted into TWRP (so flash that in fastboot if you have to), and that's when you push the file
Click to expand...
Click to collapse
I see now. Does it matter which rom I use? I will try that when I get home. Also, how to use the adb sideload. I stuck in process for about 8hours since last night I pressed the button.

When you flashed the GPe ROM was it just the ROM or the full RUU?

EddyOS said:
When you flashed the GPe ROM was it just the ROM or the full RUU?
Click to expand...
Click to collapse
I believe it was RUU.

If it was the RUU then you'll have to flash the firmware package in post 2 of the RUU thread before flashing a Sense-based ROM but if you want the GPe ROM back just flash the RUU again as per the original thread...

EddyOS said:
If it was the RUU then you'll have to flash the firmware package in post 2 of the RUU thread before flashing a Sense-based ROM but if you want the GPe ROM back just flash the RUU again as per the original thread...
Click to expand...
Click to collapse
Okay. When I tried to use TWRP install the zip file. It told me failed. Is that wrong or should I use adb?

Your backup probably failed because it didn't backup correctly. It's happened to me a couple of times wirh TWRP. You should always check your backup works before deleting anything. There are stock backups available on this forum.

The RUU has to be flashed in fastboot using the fastboot commands, so if you're trying to flash it in TWRP it will fail. To flash the RUU, you have to:
fastboot oem rebootRUU
fastboot flash zip <nameofzip>.zip
First time WILL fail, so then run the same command again - fastboot flash zip <nameofzip>.zip
fastboot reboot
This is ONLY for the RUU ZIP file and not a normal TWRP-flashable ZIP

ashyx said:
Your backup probably failed because it didn't backup correctly. It's happened to me a couple of times wirh TWRP. You should always check your backup works before deleting anything. There are stock backups available on this forum.
Click to expand...
Click to collapse
Plz tell me how to use that! Much appreciated!!!

EddyOS said:
The RUU has to be flashed in fastboot using the fastboot commands, so if you're trying to flash it in TWRP it will fail. To flash the RUU, you have to:
fastboot oem rebootRUU
fastboot flash zip <nameofzip>.zip
First time WILL fail, so then run the same command again - fastboot flash zip <nameofzip>.zip
fastboot reboot
This is ONLY for the RUU ZIP file and not a normal TWRP-flashable ZIP
Click to expand...
Click to collapse
Hopefully it will work. Thank you so much man!!! I will tell u if I make it working again. Thanks! Much appreciated!

What I posed there will get you back to a working GPe M8, to go back to Sense you'll have to go through Post 2 in the RUU thread

EddyOS said:
What I posed there will get you back to a working GPe M8, to go back to Sense you'll have to go through Post 2 in the RUU thread
Click to expand...
Click to collapse
I'm satisfied with a working phone! Google play edition is good enough for me now! Thank you so much. Keep my finger crossed it will work.

In case you weren't sure which file I was on about, it's these...
http://forum.xda-developers.com/showthread.php?t=2708589

EddyOS said:
In case you weren't sure which file I was on about, it's these...
http://forum.xda-developers.com/showthread.php?t=2708589
Click to expand...
Click to collapse
Thank you!

50ShadesOfBacon said:
Thank you!
Click to expand...
Click to collapse
If you did want sense all you need to do is restore a stock backup and then flash firmware.
If you restore gpe ruu, just download a stock sense backup, the copy and paste the extracted folder it in the twrp folder and restore, then flash the firmware_splash.zip in RUU mode
Sent from my HTC One_M8 using XDA Premium 4 mobile app

Android The Greek said:
If you did want sense all you need to do is restore a stock backup and then flash firmware.
If you restore gpe ruu, just download a stock sense backup, the copy and paste the extracted folder it in the twrp folder and restore, then flash the firmware_splash.zip in RUU mode
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You have to flash the FW package first THEN restore/flash a Sense ROM as TWRP won't mount the phone properly as the partitions are borked

EddyOS said:
Use adb push <nameofrom>.zip /sdcard and then flash that
Click to expand...
Click to collapse
I tried to get in my fastboot and do the command u gave me. It tells me to "wait for devices" HELP!!

Related

[Q] HTC One X rooted, can I still get OTA?

Hello everyone.
I just rooted my phone using hasson2000 all in one tool kit, and everything works great.
I am in the UK, with network called Three. (currently waiting for the JB update)
I am currently running android 4.0.4 with sense 4.1.
My question to you folks is will be able to receive OTA updates?
I have heard having a unlocked boot loader prevents the phone from receiving OTA updates.... is this true ?
And will re-locking the bootloader mean I will be able to download OTA update?
I know this is a lot to ask, but as this is my first time I am still what you might call me a noob.
Any help would me much appreciated.
Regards,
Shaazzaarr.
If you did NOT make any changes to the rom, like deleting bloatware and system apps. Then you are still able to fully update the phone. Bootloader can stay unlocked and root too. Don't worry about that.
What you need is
1: stock rom (root is no problem)
2: stock boot.img
3: stock recovery
Mr Hofs said:
If you did NOT make any changes to the rom, like deleting bloatware and system apps. Then you are still able to fully update the phone. Bootloader can stay unlocked and root too. Don't worry about that.
What you need is
1: stock rom (root is no problem)
2: stock boot.img
3: stock recovery
Click to expand...
Click to collapse
Hey thanks for the reply.
I'm using the stock rom, haven't touched anything. But i am not using the stock recovery - currently using twrp.
Will i still be able to receive ota updates with a custom recovery? or do I have to do the whole ruu thing?
No you can check and receive ota's you are just not able to actually update, you need to flash back the stock recovery to update. That's all :thumbup:
Mr Hofs said:
No you can check and receive ota's you are just not able to actually update, you need to flash back the stock recovery to update. That's all :thumbup:
Click to expand...
Click to collapse
Thats good news.
Say I decide to update my phone, can I just flash the stock factory recovery?
And does flashing stock recovery mean I lose super su and root previlages?
Hey, I appreciate all the help.
Thanks.
No you only lose the SU when you officially update the phone. Flashing back the stock recovery will not change the rom or root !
Mr Hofs said:
No you only lose the SU when you officially update the phone. Flashing back the stock recovery will not change the rom or root !
Click to expand...
Click to collapse
Hey thanks for the reply.
So, I don't have to do anything except flash the stock recovery when a update is available. Right? And no need of rru right?
Correct
Thanks for all the help. Can you please redirect me where I can find this stock recovery and how to flash it.
Sent from my HTC One X using xda app-developers app
Edit : read it in your post already !
http://db.tt/U5CK4noo
This is the one you need !
I am on Ics so 2.17.
Sent from my HTC One X using xda app-developers app
See my last post, edited it already. Saw the sense 4.1 4.0.4 number in the opening post
Mr Hofs said:
Edit : read it in your post already !
http://db.tt/U5CK4noo
This is the one you need !
Click to expand...
Click to collapse
Hey thanks for the quick response.
Shall I just flash it as I flashed the twrp recovery?
will this get rid of twrp recovery?
I really do appreciate your time and effort. :highfive:
Yeah if you rename my file to
Recovery.img
Then copy it to the fastboot folder on the pc, put the phone in fastboot usb mode and flash with commands
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
This will flash the stock over the twrp recovery ....then you are able to receive and update the phone
Mr Hofs said:
Yeah if you rename my file to
Recovery.img
Then copy it to the fastboot folder on the pc, put the phone in fastboot usb mode and flash with commands
Fastboot erase cache
Fastboot flash recovery recovery.img
Fastboot erase cache
This will flash the stock over the twrp recovery ....then you are able to receive and update the phone
Click to expand...
Click to collapse
Unfortunately, I do not have the fastboot files as I used hason2000s all in one toolkit.
Could you also pls send me the link to that, Thanks. :fingers-crossed:
Fastboot files as you wish
http://db.tt/ldx3qOOU
But isn't the tool capable of flashing a provided recovery ( like the stock i gave you ) ?
I never use tools
Place the files in a folder like this
C:\fastboot\*fastboot and adb files from my link*
From there you can run the command in a dosprompt so its looks like this
C:\fastboot\fastboot erase cache
And put the phone in bootloader menu before you run the command, hold the power button and the volume down button together until it restarts to the bootloader (you should see there the text *fastboot usb*)
Then you can flash ....
Mr Hofs said:
Fastboot files as you wish
http://db.tt/ldx3qOOU
But isn't the tool capable of flashing a provided recovery ( like the stock i gave you ) ?
I never use tools
Place the files in a folder like this
C:\fastboot\*fastboot and adb files from my link*
From there you can run the command in a dosprompt so its looks like this
C:\fastboot\fastboot erase cache
And put the phone in bootloader menu before you run the command, hold the power button and the volume down button together until it restarts to the bootloader (you should see there the text *fastboot usb*)
Then you can flash ....
Click to expand...
Click to collapse
You sir have been great help.
I flashed the stock recovery and it works. Still no update, but hey I at least know how to flash recovery.
Thanks again.:laugh:
No problem mate ... I'm around here a lot lately o assist :thumbup:
Nice that it worked
unable to update my one x
hi
i just bought a secound hand used htc one x and i found out that it was rooted and i am experiencing problems with the battary and the overheating so i was told that i should update to jb but there no menu for that in the device so guys plz help me
To check for any update on your one x, go in settings - scroll to about - then click software update. By the way do you know android version you are running?
Sent from my HTC One X using xda app-developers app

Any way to flash ruu via fastboot

so the title says it all..ive done this before but i forget the command
anybody?
When i soft bricked my phone i run the RUU in fastboot and it worked fine.
you will need to relock your bootloader and have more than 30% battery.
Yes phone in bootloader / fastboot usb menu
Lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode and run the RUU WITH admin rights (right click the ruu to choose it)
so no stock recovery needed
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
Nope
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
treebill said:
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
Click to expand...
Click to collapse
if you didint know that doesent work on jelly bean..still stuck on viper 3.2.1 the ruu thing doesent move help me please:crying:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Mr Hofs said:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Click to expand...
Click to collapse
thank you very much now im rocking with stock jellybean:highfive:
Cool !
CASE CLOSED !
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
walkerx said:
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
Click to expand...
Click to collapse
No you need the full 3.14.401.31ruu instead of the ota. The 3.14.401.27 will not work because that one contains the 1.36 hboot and you are on the 1.39 hboot, downgrade is impossible
Are u on a unlocked bootloader and a custom recovery , then get your cid
Fastboot oem readcid
and download your matching nandroid here
http://forum.xda-developers.com/showthread.php?t=1975140
Do a full wipe, flash the boot.img from the nandroid and restore the nandroid .... Then flash back the stock 3.14 recovery .... and then relock the bootloader
Fastboot oem lock
That's the closest to stock you can get !
Hi,
Yes I am on unlocked bootloader with custom recovery
I've downloaded the file stock-nandroid-3.14.401.31.tar.bz2
I've managed to display the file contents
boot.emmc.win
boot.emmc.win.md5
data.ext3.win
data.ext3.win.md5
system.ext4.win
system.ext4.win.md5
would i be correct in saying i extract the boot.emmc.win from the file and then flash it
restore the nandroid from within twrp
flash boot-3.14.401.img
relock bootloader
would this then be suitable to send off to htc for repair?
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Mr Hofs said:
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Click to expand...
Click to collapse
flashed boot.emmc.win
extracted the files to clockworkmod\backup but when choose restore on twrp it says updating partitions and doesn't do anything
should the files be copied to twrp folder?
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Mr Hofs said:
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Click to expand...
Click to collapse
thanks - i've installed CWM via fastboot and when attempt to restore get a md5 error
trying to get adb working on my machine so perform the md5sum check but always reports no devices - fastboot is fine
What i meant was that you can't restore a twrp backup with cwm at all, maybe there is a workaround but i don't know it, flash the twrp back and check in the backup collection thread if there is info about the twrp folders
Twrp backups are at /sdcard/TWRP/BACKUPS/[device serial]/[backup name]/
Sent from my One X

[Q] How to get 4.4.2 w/ S.Off & Custom Recovery

Fellow Noob here. Please bare with me.
Purchase a used HTC one. Previous owner has S Off and Custom Recovery (Team Recovery).
The OTA comes over on my phone but when I try to install I am taken to the Team Recovery prompt at start up.
How do I get my phone to a state to take OTA updates like 4.4.2 (Verizon)?
Help is much appreciated.
mrartyen said:
Fellow Noob here. Please bare with me.
Purchase a used HTC one. Previous owner has S Off and Custom Recovery (Team Recovery).
The OTA comes over on my phone but when I try to install I am taken to the Team Recovery prompt at start up.
How do I get my phone to a state to take OTA updates like 4.4.2 (Verizon)?
Help is much appreciated.
Click to expand...
Click to collapse
You'll have to go back to stock rom and stock recovery. There should be a thread out there to tell you how if you don't already know. Search this forum for "return to Stock recovery" and I'm sure you'll find it.
Does this video an accurate description of what I need to do?
Youtube: How to Unroot HTC ONE and Relock Bootloader or back to STOCK (All Versions)
Sorry can't post links yet.
The exception being - using the correct RUU for verizon?
Ruu back to 2.10.605.1 - can be found in santods rom/radio/kernel thread at the bottom of the second post.
Take the ota
Fastboot flash recovery
Flash Superuser thru recovery.
No need to relock your bootloader to do an ruu, it is a myth.
cmlusco said:
Ruu back to 2.10.605.1 - can be found in santods rom/radio/kernel thread at the bottom of the second post.
Take the ota
Fastboot flash recovery
Flash Superuser thru recovery.
No need to relock your bootloader to do an ruu, it is a myth.
Click to expand...
Click to collapse
Thank you cmlusco. Very greatful.
So 1) Download Ru 2.10.605.1
2) Go through the prompts
3) take OTA 4.4.2 (KitKat)
At this point, what does the Fastboot Flash Recovery, and Flash Superused thru recovery do?
Thank you very much!
Yes, and those roots the phone again. It flashes a custom recovery like twrp, so that u can flash superuser, roms, mods, and do backups. And the second flashes superuser, which well gives you superuser rights to modify files on the phone, use root apps, etc..
rilishe ramsey
cmlusco said:
Yes, and those roots the phone again. It flashes a custom recovery like twrp, so that u can flash superuser, roms, mods, and do backups. And the second flashes superuser, which well gives you superuser rights to modify files on the phone, use root apps, etc..
Click to expand...
Click to collapse
Gotcha. I could just leave it after the OTA 4.2.2. - leaving the device unrooted (but with a unlocked bootloader & S off)?
my main objective is to really just go back to stock but still get OTA updates. i purchased this phone with the intention of just running stock features etc.
Yeah just do the ruu and you will be stock unlocked s-off JB. Then you can take the KK ota and all future ota's.
cmlusco said:
Yeah just do the ruu and you will be stock unlocked s-off JB. Then you can take the KK ota and all future ota's.
Click to expand...
Click to collapse
After downloading 2 different RUU's I can't find any Exe Executable files after unzipping.. What am I doing wrong?
You dont unzip them and there is no exe. You flash the zip as it is using fastboot. You need adb and fastboot + drivers installed on your pc. Place the zip in the same folder as adb.exe and fastboot.exe. Then open a cmd prompt on your pc so that the path is the same as where the files are. Then reboot the phone to the bootloader. In the cmd prompt type
Code:
fastboot oem rebootRUU
The phone will go to a black screen, then type
Code:
fastboot flash zip name_of_file.zip
It may fail the first time with a message about flushing, this is normal. Just run the second cmd again
Code:
fastboot flash zip name_of_file.zip
cmlusco said:
You dont unzip them and there is no exe. You flash the zip as it is using fastboot. You need adb and fastboot + drivers installed on your pc. Place the zip in the same folder as adb.exe and fastboot.exe. Then open a cmd prompt on your pc so that the path is the same as where the files are. Then reboot the phone to the bootloader. In the cmd prompt type
Code:
fastboot oem rebootRUU
The phone will go to a black screen, then type
Code:
fastboot flash zip name_of_file.zip
It may fail the first time with a message about flushing, this is normal. Just run the second cmd again
Code:
fastboot flash zip name_of_file.zip
Click to expand...
Click to collapse
cmlusco - Thank you very much.
Couldn't have done it without your patience and help.
I'm back to stock - OTA 4.4.2
Can't thank you enough.

what do i rename the rom name to flash in bootloader

for example htc rezound if you rename the rom name to PH98IMG you can reboot into bootloader and flash the rom automatically. how do I do that? asking because I don't have a rom on my phone (I wiped everything) now trying to get a rom loaded on it
sogone209 said:
for example htc rezound if you rename the rom name to PH98IMG you can reboot into bootloader and flash the rom automatically. how do I do that? asking because I don't have a rom on my phone (I wiped everything) now trying to get a rom loaded on it
Click to expand...
Click to collapse
Your Rom can be named whatever you want as long as you write the name the same in the command and Idk if there is an automatic way like that, I doubt it.
This cant be done with roms, only with ruu's and firmware images. You would need a usb-otg cable, a fat32 formated flash drive, and the correct name would be PN07IMG.zip
im so stuck now. the htc resound was so much easier.
im s-off but stuck with no rom at all to load.
I kno how to adb sideload a rom to my phone but non of them are installing.
how can I return to stock?
sogone209 said:
im so stuck now. the htc resound was so much easier.
im s-off but stuck with no rom at all to load.
I kno how to adb sideload a rom to my phone but non of them are installing.
how can I return to stock?
Click to expand...
Click to collapse
Ruu
Chilidog said:
Ruu
Click to expand...
Click to collapse
more information would be nice. I cant not find a ruu zip or exe downloadwith vzw_001 thats my cid I believe.
so I will have to get that ruu and adb sidload it and then install from twrp? or fastboot oem rebootRUU install it that way?
detailed information would be greatly appreciated my hboot is the dreaded 1.56 I am s-off tho unlocked.
You can get the ruu's at the bottom of this post http://forum.xda-developers.com/showthread.php?p=46506621
You can direct flash thru hboot as i explained earlier, or use
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip nameoffile.zip
You do not sideload the zip to the phone, but put it on your pc in the same folder as fastboot.exe.
cmlusco said:
You can get the ruu's at the bottom of this post http://forum.xda-developers.com/showthread.php?p=46506621
You can direct flash thru hboot as i explained earlier, or use
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip nameoffile.zip
You do not sideload the zip to the phone, but put it on your pc in the same folder as fastboot.exe.
Click to expand...
Click to collapse
hmm thank you so much. and for some reason encrypted ruu doesn't work? but isn't that like how stock comes from the factory? I would like it to be factory stock to the max. then im gunna just debloat it.
For encrypted to work you must relock your bootloader. Either way you are getting the exact same thing. Encrypted / decrypted refer to the flashable file it self, not the files it contains or how they are put on the phone. Once you do the ruu and take the ota, you will be compleet stock other than being unlocked and s-off.

Trying to update LeeDroid - Seriously confused - Can't find firmware

Hi all
Really stuck at the moment
My CID is HTC_001 and I'm on version 2.41.401.3? (S-ON)
I'm trying to flash the latest oreo firmware however I can't either find the correct RUU to do it, on top of that I'm trying the flash (I think the right file?_) via SD card however I don't have one and people are mentioned using a command prompt which confused me more.
Please help ! If you can provide links to the RUU or the correct file I'm meant to flash I'd appreciate it
Edit:
Solved - Answer on page two!
Rammen44 said:
Hi all
Really stuck at the moment
My CID is HTC_001 and I'm on version 2.41.401.3? (S-ON)
I'm trying to flash the latest oreo firmware however I can't either find the correct RUU to do it, on top of that I'm trying the flash (I think the right file?_) via SD card however I don't have one and people are mentioned using a command prompt which confused me more.
Please help ! If you can provide links to the RUU or the correct file I'm meant to flash I'd appreciate it
Click to expand...
Click to collapse
Check out this thread. Read the first couple of posts on how to proceed and if you have any questions use search.
Rammen44 said:
Hi all
Really stuck at the moment
My CID is HTC_001 and I'm on version 2.41.401.3? (S-ON)
I'm trying to flash the latest oreo firmware however I can't either find the correct RUU to do it, on top of that I'm trying the flash (I think the right file?_) via SD card however I don't have one and people are mentioned using a command prompt which confused me more.
Please help ! If you can provide links to the RUU or the correct file I'm meant to flash I'd appreciate it
Click to expand...
Click to collapse
The easiest way for someone who doesn't want to take the time to learn how things work would be to download this Nougat RUU
https://androidfilehost.com/?w=files&flid=241133
To flash RUU:
Rename the file to 2PS6IMG.zip
Place on Ex SD CARD
boot to download mode
Press vol up to flash.
RUU will erase internal storage. Once RUU has flashed boot your phone and take the OTA to OREO. After your phone has taken the OTA flash the latest twrp then flash leedroid Oreo ROM.
The reason I suggest this way instead of flashing firmware is because your going to have to wipe data anyway and by flashing an RUU you have a clean start.
yldlj said:
The easiest way for someone who doesn't want to take the time to learn how things work would be to download this Nougat RUU
To flash RUU:
Rename the file to 2PS6IMG.zip
Place on Ex SD CARD
boot to download mode
Press vol up to flash.
RUU will erase internal storage. Once RUU has flashed boot your phone and take the OTA to OREO. After your phone has taken the OTA flash the latest twrp then flash leedroid Oreo ROM.
The reason I suggest this way instead of flashing firmware is because your going to have to wipe data anyway and by flashing an RUU you have a clean start.
Click to expand...
Click to collapse
Hi, thanks for the advice. The issue I'm having is I don't have access to an SD card so I'm trying to flash via ADB sideload in TWRP however I'm now met with zip file invalid in TWRP.
Rammen44 said:
Hi, thanks for the advice. The issue I'm having is I don't have access to an SD card so I'm trying to flash via ADB sideload in TWRP however I'm now met with zip file invalid in TWRP.
Click to expand...
Click to collapse
You can't flash it with twrp. You can use htc_fastboot and flash from RUU mode.
yldlj said:
You can't flash it with twrp. You can use htc_fastboot and flash from RUU mode.
Click to expand...
Click to collapse
Awesome okay, so I've booted in RUU mode however on the command prompt when I try to flash I'm met with target reported max download size of 157920000, invalid sparse file format at header magic. Can you advise?
Again thanks for the help
Edit: Screen grab of the error I'm met with https://imgur.com/a/WtP5wsq
Rammen44 said:
Awesome okay, so I've booted in RUU mode however on the command prompt when I try to flash I'm met with target reported max download size of 157920000, invalid sparse file format at header magic. Can you advise?
Again thanks for the help
Edit: Screen grab of the error I'm met with https://imgur.com/a/WtP5wsq
Click to expand...
Click to collapse
You need htc_fastboot
yldlj said:
You need htc_fastboot
Click to expand...
Click to collapse
How do I go about getting htc_fastboot?
Rammen44 said:
How do I go about getting htc_fastboot?
Click to expand...
Click to collapse
Use the thing called google. Better yet just get a SD card
yldlj said:
You need htc_fastboot
Click to expand...
Click to collapse
Hi never mind I'm in Fastboot now, I'll try install the zip above
yldlj said:
Use the thing called google. Better yet just get a SD card
Click to expand...
Click to collapse
I'm sorry about the questions,.
yldlj said:
Use the thing called google. Better yet just get a SD card
Click to expand...
Click to collapse
yldlj said:
You can't flash it with twrp. You can use htc_fastboot and flash from RUU mode.
Click to expand...
Click to collapse
Thank you for your help!
If anyone wants to know what I did to get back to stock so I could download Oreo
Downloaded Fastboot/ADB(Use this guide) https://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Enabled USB debugging on the phone
Download HTC_Fastboot (Google it)
Download the Zip yldlj posted (Only if you are the same CID as me, the check this go onto the app store and find CID checker and then look on XDA for appropriate zip)
Put the download zip into the same folder as ADB/HTC_Fastboot/Fastboot folder. Rename it ota.zip
In the folder where you've extracted the ADB/Fastboot/ hold Ctrl Shift Right click open command window here
Connect your phone via USB
Set your phone onto download mode
From there I used the command htc_fastboot oem rebootRUU
Once loaded into RUU Mode use the command htc_fastboot flash zip ota.zip
Once that was complete I was back to stock Android N which then enables me to update to Oreo
BANG
Fixed
Thank you everyone for your help. If you get stuck I'll try my best to help you
Rammen44 said:
Thank you for your help!
If anyone wants to know what I did to get back to stock so I could download Oreo
Downloaded Fastboot/ADB(Use this guide) https://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Enabled USB debugging on the phone
Download HTC_Fastboot (Google it)
Download the Zip yldlj posted (Only if you are the same CID as me, the check this go onto the app store and find CID checker and then look on XDA for appropriate zip)
Put the download zip into the same folder as ADB/HTC_Fastboot/Fastboot folder. Rename it ota.zip
In the folder where you've extracted the ADB/Fastboot/ hold Ctrl Shift Right click open command window here
Connect your phone via USB
Set your phone onto download mode
From there I used the command htc_fastboot oem rebootRUU
Once loaded into RUU Mode use the command htc_fastboot flash zip ota.zip
Once that was complete I was back to stock Android N which then enables me to update to Oreo
BANG
Fixed
Thank you everyone for your help. If you get stuck I'll try my best to help you
Click to expand...
Click to collapse
Glad you sorted it :good:
yldlj said:
The easiest way for someone who doesn't want to take the time to learn how things work would be to download this Nougat RUU
https://androidfilehost.com/?w=files&flid=241133
To flash RUU:
Rename the file to 2PS6IMG.zip
Place on Ex SD CARD
boot to download mode
Press vol up to flash.
RUU will erase internal storage. Once RUU has flashed boot your phone and take the OTA to OREO. After your phone has taken the OTA flash the latest twrp then flash leedroid Oreo ROM.
The reason I suggest this way instead of flashing firmware is because your going to have to wipe data anyway and by flashing an RUU you have a clean start.
Click to expand...
Click to collapse
will it work on S-On too?
Ahmed Xperia p said:
will it work on S-On too?
Click to expand...
Click to collapse
Yes a signed ruu will work with s-on.
Mr Hofs said:
Yes a signed ruu will work with s-on.
Click to expand...
Click to collapse
i'm S-on and currently on leedroid. Sprint HTC10
Can i downgrade to Nougat this way since AFAIK it's not possible with S-on?
thanks and sorry for too many questions
Ahmed Xperia p said:
i'm S-on and currently on leedroid. Sprint HTC10
Can i downgrade to Nougat this way since AFAIK it's not possible with S-on?
thanks and sorry for too many questions
Click to expand...
Click to collapse
1: you need the ruu that matches your main version OS which can be found in the download mode
2: if you are on leedroid oreo means you have a oreo firmware and in that case you can not "just" flash a nougat ruu. Check the guides section, there is a downgrade dedicated thread with all the needed information

Categories

Resources