Hello,
So i was attempting to restore my note 2 from 4.4.2 to Original 4.1.2 and i found a way using TriangleAway ,So i flashed the param.tar file found in this thread : http://forum.xda-developers.com/galaxy-s2/orig-development/2013-10-04-triangleaway-v3-10-t1494114 .Now my phone takes a 15 Sec showing the Galaxy Note 2 logo when booting up and the boot animation it self hangs,My Bluetooth won't turn on and the phone restarts from itself.
I tried to flash an official 4.4.2 again but with no use
Can someone please help me :crying:
"Problem solved after flashing a full Rom"
mahawa said:
Hello,
So i was attempting to restore my note 2 from 4.4.2 to Original 4.1.2 and i found a way using TriangleAway ,So i flashed the param.tar file found in this thread : http://forum.xda-developers.com/galaxy-s2/orig-development/2013-10-04-triangleaway-v3-10-t1494114 .No my phone takes a 15 Sec showing the Galaxy Note 2 logo when booting up and the boot animation it self hangs,My Bluetooth won't turn on and the phone restarts from itself.
I tried to flash an official 4.4.2 again but with no use
Can someone please help me :crying:
Click to expand...
Click to collapse
You can only downgrade back to 4.3 instead of 4.1.2 if you've flashed KitKat 4.4.2 via ODIN.
What you mean you've flashed to 4.4.2 official and didn't work? Cannot boot or other problem?
Always freezes and restarts
soralz said:
You can only downgrade back to 4.3 instead of 4.1.2 if you've flashed KitKat 4.4.2 via ODIN.
What you mean you've flashed to 4.4.2 official and didn't work? Cannot boot or other problem?
Click to expand...
Click to collapse
I tired 4.4.2 official,i tried Cyanogenmod,i even installed official 4.3 but the problem still exists.The phone boots in system and suddenly the device freezes and restart every time this happens.
Always freezes and restarts
mahawa said:
I tired 4.4.2 official,i tried Cyanogenmod,i even installed official 4.3 but the problem still exists.The phone boots in system and suddenly the device freezes and restart every time this happens.
Click to expand...
Click to collapse
And the phone freezes once it boots in system ,does not take long.
Always freezes and restarts
soralz said:
You can only downgrade back to 4.3 instead of 4.1.2 if you've flashed KitKat 4.4.2 via ODIN.
What you mean you've flashed to 4.4.2 official and didn't work? Cannot boot or other problem?
Click to expand...
Click to collapse
The phone freezes once it boots in system,the only thing i want now is to fix the freeze and restart issue i no more want to downgrade to 4.1.2.
mahawa said:
The phone freezes once it boots in system,the only thing i want now is to fix the freeze and restart issue i no more want to downgrade to 4.1.2.
Click to expand...
Click to collapse
Then, did you tried flash stock ROM via ODIN?
Solved
soralz said:
Then, did you tried flash stock ROM via ODIN?
Click to expand...
Click to collapse
Thanks Soralz,I repartitioned and flashed a full factory ROM using odin and the phone is now working normally again.
I'm happy now
mahawa said:
Thanks Soralz,I repartitioned and flashed a full factory ROM using odin and the phone is now working normally again.
I'm happy now
Click to expand...
Click to collapse
Of course, next time if have any problem just flash the stock ROM via ODIN. It will solve most problems.
How you have repartitioned it
mahawa said:
Thanks Soralz,I repartitioned and flashed a full factory ROM using odin and the phone is now working normally again.
I'm happy now
Click to expand...
Click to collapse
Which method. where is the link.
fundoosite said:
Which method. where is the link.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1896696
Full rom and pit file for repartitioning
fundoosite said:
Which method. where is the link.
Click to expand...
Click to collapse
This Rom and pit file is for the GT-N7100 (the GSM version)
This is the link for a full official Rom (4.3) : http://d-h.st/e4N,the zip file have four files:
BL for bootloader
AP for the ROM itself (PDA)
CP that is the modem file
CSC for language
And you going to need the pit file for your device to re-partition, i have it right here if you do not have it :
http://forum.xda-developers.com/attachment.php?attachmentid=1575322&d=1355893688
Flash these files via odin and be aware that this process will erase every thing stored on your device.
i hope this helps you,have fun ...
Related
Hi I have this problem that OTA download new update and than it was installing when it reboot it never come back it is now stuck on galaxy note II screen. things i did is tring to install stock rom( KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5) and it complete pass but when it reboot same thing it is stuck on screen. i tried to clean cache but it doesn't boot in to recovery. now i am stock i need help. just want to is it partion got damaged. does anybody have complete package rom( means PIT file, PDA file, CSC file, Phone file, bootloader file) i tried looking for file i found links of hotfile but hotfile is no more i also found couple of dropbox links which is not active no more can some one help me on this.
Thank you
ash0621 said:
Hi I have this problem that OTA download new update and than it was installing when it reboot it never come back it is now stuck on galaxy note II screen. things i did is tring to install stock rom( KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5) and it complete pass but when it reboot same thing it is stuck on screen. i tried to clean cache but it doesn't boot in to recovery. now i am stock i need help. just want to is it partion got damaged. does anybody have complete package rom( means PIT file, PDA file, CSC file, Phone file, bootloader file) i tried looking for file i found links of hotfile but hotfile is no more i also found couple of dropbox links which is not active no more can some one help me on this.
Thank you
Click to expand...
Click to collapse
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
dicksteele said:
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
Click to expand...
Click to collapse
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
ash0621 said:
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
Click to expand...
Click to collapse
Sweet.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
EDIT: Assuming you are ATT user
I ran into the same problem. However, after flashing 4.3param_tz it puts me back to 4.1.1. How do I upgrade to 4.1.2? If I try doing an OTA to 4.1.2, the phone reboots after downloading, installs and then hangs again at the Samsung Galaxy Note II screen.
ash0621 said:
Thanks for reply
I tried 4.3 param.bin it works phone come back to live
now its is on 4.1.2
baseband i317ucama4
kernal :3.0.31-578342
build: JZ054K.I317UCAMA4
NOW WHEN CLICK ON SOFTWARE UPDATE IT SAYS NO fIRMWARE
SI HOW CAN I UPDATE TO 4.3
THANKS
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2589891
-》Sent from my mind to your screen.
THANK YOU!
dicksteele said:
Go to this thread.
http://forum.xda-developers.com/showthread.php?t=2502464
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
ODIN under Section 8 hers
http://forum.xda-developers.com/showthread.php?t=1987541
Click to expand...
Click to collapse
I was worried that my phone was going to be a paperweight. My phone wasn't able to get past the Galaxy Note II logo. All that I was able to do was go into download mode and flash anything but i couldn't go into recovery mode. After flashing 4.3 param .tz.tar my phone was finally able to boot up. Thanks so much.
acowsaysmoo said:
I was worried that my phone was going to be a paperweight. My phone wasn't able to get past the Galaxy Note II logo. All that I was able to do was go into download mode and flash anything but i couldn't go into recovery mode. After flashing 4.3 param .tz.tar my phone was finally able to boot up. Thanks so much.
Click to expand...
Click to collapse
Sweet. It's hard as hell to kill these phones. Luckily someone tried that trick. I was in the same boat last month when I was testing.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Hi, i bought a note 2 and it was stuck in galaxy note II Logo i did that and now it is stuck in samsung logo, the guy that i bought it said that it was running OTA 4.3 and they root it and tried to downgrade it. i put twrp recovery and when i tried to do a factory reset it said failed.
tito07dr said:
Hi, i bought a note 2 and it was stuck in galaxy note II Logo i did that and now it is stuck in samsung logo, the guy that i bought it said that it was running OTA 4.3 and they root it and tried to downgrade it. i put twrp recovery and when i tried to do a factory reset it said failed.
Click to expand...
Click to collapse
Just start from scratch
http://forum.xda-developers.com/showthread.php?t=2618447
Then when you get to Post #3 steps, you can just flash a stock rooted 4.3 Rom instead of doing the 4.3 OTA again.
[QRCODE][/QRCODE]
dicksteele said:
Just start from scratch
http://forum.xda-developers.com/showthread.php?t=2618447
Then when you get to Post #3 steps, you can just flash a stock rooted 4.3 Rom instead of doing the 4.3 OTA again.
Click to expand...
Click to collapse
i flashed TWRP 2.6.3.1 , then installed i317-cwm-ucubmk6-rooted-odex.zip via twrp, it boot up but now it is stucked in att logo.
PD: when i tried to factory reset twrp said failed, only can clean cache :S.
---------- Post added at 05:15 PM ---------- Previous post was at 04:53 PM ----------
tito07dr said:
[QRCODE][/QRCODE]
i flashed TWRP 2.6.3.1 , then installed i317-cwm-ucubmk6-rooted-odex.zip via twrp, it boot up but now it is stucked in att logo.
PD: when i tried to factory reset twrp said failed, only can clean cache :S.
Click to expand...
Click to collapse
i solved it, just wipe data, them did factory resest and now it power up!!
Thx a lot bro!
Hi, i have another problem i dont know if it is a software or hardware issue, all the sensors are like off, light, proximity, gyro, all!,
pic attached
tito07dr said:
Hi, i have another problem i dont know if it is a software or hardware issue, all the sensors are like off, light, proximity, gyro, all!,
pic attached
Click to expand...
Click to collapse
hey any1 can help me with this problem? i tested the board with other light/proximity sensor and it didnt work.
im running i317-cwm-ucubmk6-rooted-odex.zip with
thanks!
tito07dr said:
hey any1 can help me with this problem? i tested the board with other light/proximity sensor and it didnt work.
im running i317-cwm-ucubmk6-rooted-odex.zip with
thanks!
Click to expand...
Click to collapse
What app are you using. I'm running the same ROM
dicksteele said:
What app are you using. I'm running the same ROM
Click to expand...
Click to collapse
nothing, I just flashed it.
tito07dr said:
I'm oem, nothing, I just flashed it.
Click to expand...
Click to collapse
What application are you using to test the sensors, or what is the screenshot of
dicksteele said:
What application are you using to test the sensors, or what is the screenshot of
Click to expand...
Click to collapse
*#0*#, the samsung test mode
Hi All. I've been working on this Note 2 for the past 48 hours (maybe 5-6 hours each day), but still cannot figured out what's wrong with it. I have downloaded the stock Rogers rom 4.4.2 and it flashed perfectly fine and when it reboot, then stuck at Samsung screen. I've tried method like removed battery then wipe data/factory reset, then wipe cache partition but to no avail.
The stock rom I used is I317MVLUDNF3_I317MOYADNF3_I317MVLUDNF3_HOME.tar, not sure if this is correct.
I also get these error message:
E:failed to mount /efs (invalid argument)
Anyone can help me out. I would greatly appreciate.
Thanks
You need the ne5 version the nf3 is for the n7105
Do you know where I can download it?
terpin32 said:
You need the ne5 version the nf3 is for the n7105
Click to expand...
Click to collapse
Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.
Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!
Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!
Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...
Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Veras07 said:
I've installed this rom and I have many problems with it
when I flashed any update my note starts to reboot by itself.
How can I fix That?
Click to expand...
Click to collapse
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
fogame said:
Did you flash the entire file? There are usually two. The full rom and then updates to the rom. I would check in his thread to see what happened.
Also clearing the cache can help with the boot process
Click to expand...
Click to collapse
I did everything, but the problem begins when I install the updates.
If I only install v5, my note doesn't reboot by itself.
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
sawixso81 said:
Gotta ask what was your process for flashing 5.0 did you wipe x3 and format data x3 that is what I normally do Im playing with mods right now but have been running 5.0.3 for a couple of days with no reboots actually never got any reboots while on DomPop
What Baseband and Modem are you running download the systeminfo app from playstore and it should tell you if you are unsure.
Click to expand...
Click to collapse
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Veras07 said:
OK, I've solved the problem.
I updated the Baseband and bootloader, now everything works fine.
Thanks a lot.
Click to expand...
Click to collapse
How did you update the baseband and bootloader? Mines doing the exact same thing
G2blkteg said:
How did you update the baseband and bootloader? Mines doing the exact same thing
Click to expand...
Click to collapse
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Veras07 said:
I used Odin v3.10.6 to flash T-Mobile 5.0 stock rom, but I modified Odin to can update the baseband and bootloader.
Click to expand...
Click to collapse
As I have understood, you can only update the baseband and bootloader through ota. I Flashed the rom twice, the first time only the system was updated but no the baseband, the second did the modification of odin and everything went perfect.
G2blkteg said:
Thanks... Wasnt sure if i should have done N900TUVUDNK3 4.4.2 or 5.0... So there's obviously a root for stock 5.0 correct?
Click to expand...
Click to collapse
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Veras07 said:
I was on N900TUVUDNK3 baseband, installed the stock rom, after that Flashed twrp recovery via Odin, and finally Flashed DomPop v5.0 and updates.
Click to expand...
Click to collapse
So how did you modify odin to update the baseband and bootloader?
G2blkteg said:
So how did you modify odin to update the baseband and bootloader?
Click to expand...
Click to collapse
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Veras07 said:
Download Odin v3.10.6 from this link http://forum.xda-developers.com/showthread.php?t=2711451, unzip and search for the odin3.ini file, open it and modify this two lines:
PhoneEFSClear=0
PhoneBootUpdate=0k
Change the first from 0 to 1 if you want to do a factory reset when you install the rom
Change the second one from OK to 1 to Odin update the baseband and bootloader automatically. After that open Odin, connect your note on download mode and install the rom.
Click to expand...
Click to collapse
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
G2blkteg said:
Ill give it a shot... Thanks.... Now another question.. What did you use to root 5.0?
Click to expand...
Click to collapse
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Veras07 said:
You don't need to root stock rom. Download openrecovery-twrp-2.8.0.1-hltetmo-4.4.zip from Google and install via Odin, after that you only have to reboot into the twrp recovery and install the DomPop rom.
This rom comes rooted.
Click to expand...
Click to collapse
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
G2blkteg said:
Oohhhhh thanks man... I appreciate that... I always thought i had to root first before i can flash a recovery... Good to know... Im downloading what i need now.... Now i wish the dompop had unlimited tethering lol
Click to expand...
Click to collapse
About the unlimited tethering I don't know.
Veras07 said:
About the unlimited tethering I don't know.
Click to expand...
Click to collapse
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
G2blkteg said:
One last thing... What file did you use for 5.0? Ive seen a few... Was it 1.4gb?
Click to expand...
Click to collapse
That's the correct file.
Veras07 said:
That's the correct file.
Click to expand...
Click to collapse
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
G2blkteg said:
Ok last thing.. Do i place the file in BL, AP, CP, or CSC in odin?
Click to expand...
Click to collapse
Place the file on AP
Hi! I'm new in here.
I have a big problem. I putted on the resurrection remix 5.0 rom. But I didn't like it because of the camera, multiwindows, little bugs ecc.
So I wanted to turn to stock. So I downloaded the latest firmware H3G Italy 4.4.2 and flashed it with Odin 3.09 first and it didn't work and then with Odin 3.07 and it still didn't work. :crying: :crying: :crying: It is stuck on SAMSUNG whrite
Odin don't give me any errors. At the end it sees Pass! (something like that)
What can I do? Why stock is bricking my phone :crying:
Sorry for my bad english :crying::crying::crying:
don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before
HaZa3 said:
don't worry just download 4 files software 4.4.2 then flash it by Odin
I had same as your problem before
Click to expand...
Click to collapse
what do you mean with 4 files software? thanks god for your responding... and yours obviosly
bogdan1995 said:
what do you mean with 4 files software? thanks god for your responding... and yours obviosly
Click to expand...
Click to collapse
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone
vagsvag said:
He means emergency firmware but not exist for 4.4.2, this was for 4.1.2 and you cannot flash because your bootloader not leaving downgrade first and if you flash 2cond you loose your imei because of efs partition upgrade. Probably you haven't factory reset your phone before flash, go to recovery and factory reset your phone and restart.
Send from my phone
Click to expand...
Click to collapse
thank you man! i found in internet how to go to the recovery (i didn't try before because I didn't know I had a recovery ).
PROBLEM SOLVED. THANKS ALL OF YOU. YOU ARE SPECIAL GUYS.
ps: I'm in love with my stock... everything. at the end touchwhitz isn't so bad
I am trying to flash the stock firmware in Odin but it always fails. Everything works fine until "NAND Write Start" then it just fails. Any suggestions? I am using the latest version of Odin and the firmware from this thread: http://forum.xda-developers.com/tmobile-galaxy-s6-edge/general/odin-stock-firmwares-t3081165
Did you try smart switch?
Remember reading somewhere in the thread about odin failure and finally getting smartswitch to restore phone.
Pp.
Smart Switch won't recognize it.
calebcaudill said:
Smart Switch won't recognize it.
Click to expand...
Click to collapse
try emergency recovery using model # and S/N
assem_2222 said:
try emergency recovery using model # and S/N
Click to expand...
Click to collapse
So I finally got Odin to flash the stock firmware but now I can't get the phone to boot into recovery, the screen just freezes.
calebcaudill said:
So I finally got Odin to flash the stock firmware but now I can't get the phone to boot into recovery, the screen just freezes.
Click to expand...
Click to collapse
This is the same exact scenario that everyone else that tries using odin runs into.
Don't think there's anything you can do but wait for a smart dev to figure it out or for Samsung to release the build source that devs need to fix it.
Maybe you have a spare phone to use.
Pp.
I have run Odin and flashed 5.0 a few times and can get into recovery just fine. But I haven't tried Odin 5.1 though.