Hi. After a long break I got back to upgrade my phone. I decided to flash 4.1.B.0.587. I did everything (root, unlock bootload, cwm). And I went a little further than before. After flash, wifi did not work, then i try install alot of kernels and roms + wifi modules . on any still do not work. Trying enable it but its look for completly off (only inscription ,,Turning on wifi") . I wanted to install Xperia Ultimate HD 5.0.1 (i installed that before and all work perfect, it looked too good to work with wifi ). What will be the solution to my problem? Do I need a special kernel or rom, mod, special module? Maybe should I install wifi manually? have You any ideas what i do wrong? On GB everything was working good
I get tired of it all day, have tried many methods, looking for many sites and I have not found the answer to my question My phone is Xperia Pro Mk16i
Thanks in advance for Your help and sorry for my poor english
ellek1 said:
Hi. After a long break I got back to upgrade my phone. I decided to flash 4.1.B.0.587. I did everything (root, unlock bootload, cwm). And I went a little further than before. After flash, wifi did not work, then i try install alot of kernels and roms + wifi modules . on any still do not work. Trying enable it but its look for completly off (only inscription ,,Turning on wifi") . I wanted to install Xperia Ultimate HD 5.0.1 (i installed that before and all work perfect, it looked too good to work with wifi ). What will be the solution to my problem? Do I need a special kernel or rom, mod, special module? Maybe should I install wifi manually? have You any ideas what i do wrong? On GB everything was working good
I get tired of it all day, have tried many methods, looking for many sites and I have not found the answer to my question My phone is Xperia Pro Mk16i
Thanks in advance for Your help and sorry for my poor english
Click to expand...
Click to collapse
Installed correct WiFi modules depending on the kernel?
yes, any kernel flashed correctly together with the modules of this kernel (modules i instaling in cwm)
nobody can help me?
today i was installed cyanogen mod 9.1 with kernel in this pack wifi still isnt work
Anyone can give me patch of wifi driver in MK16i in ICS? I try instal it manually
Somebody answer me what I have to focus, where start repairing wifi?
Does WiFi work fine on stock ROM?
wifi work only on all GB, wifi does not work on stock ICS ROM and other ICS firmwares. That's why trying other roms...
any new sugestions what i should do to fix that wifi? its making me nervous, i must pay for network
xx
xx
xx
xx
after some break i am back, and problem with wifi still unsolved, i like to try again to repair, anyone have some idea from how to start repair wifi manualy?
my problem looking that
https://youtu.be/Ixp0QnASHwY
but i have xperia pro mk16i, and wifi looking like disable, never connected wifi with this phone on ICS
Related
I have downloaded MIUI v4 2.8.24 from here http://forum.xda-developers.com/showthread.php?t=1565194
I've tried various kernels and methods including the ones suggested in the different kernels and the rom installation instructions to get WIFI to work but i simply cant get wifi working at all, im currently on ArcKnight Kernel RC3.5.1 OC TEST, I was previously on Doomlords ICS Kernel and i flashed the Doomed wifi fix before flashing ArcKnights kernel but still cannot get wifi to work, any help would be appreciated
I've tried everything i can think of but no doubt its a simple fix and im now over thinking it too much :laugh:
did u take the ram patch if so you need the wifi libs for the kernal ur using ark knight init if you didnt take the ram boost try the stock plus cwm+sd ext and its libs iff all else fails do a fresh install of latest fw then reflash the rom with out the patch for ram and it will boot straight away
my bad thought u meant this one =) http://forum.xda-developers.com/showthread.php?t=1851262
Wifi Modules
if you are using arcknight's kernel, you may have to flash his wifi modules to allow wifi to work, it can be found in his kernel thread, around the second or third post, if im not wrong.
I got the same problem with this one too... http://forum.xda-developers.com/showthread.php?t=1849403&page=7
I used the stock kernel and turn on wifi ... it keeps saying "turning wifi on ...."
Hi All,
First of all, congratulations for the forum and great project on adroid!!! I'm new on this, and hope learn something here and who knows help in some development.
I will inform a lot of things on this post since i don't know what can be relevant....
I unlocked my phone, and installed ICS Beta from Sony, and used for a while, but, I really want to use CM 9 or 10... so i've downloaded, the stable packages of CM9.1, and CWM5 and installed on the phone as described in many places here and on the CM Wiki, and all functions work ok besides my wifi, it simply doesn't start(Don't star on CM 9 /9.1/ 10)...
Ive also installed baseband mods hoping this can help, but nothing happens....
The same thing happend with ICS Beta From Sony but the Dommlord package to enable WIFI and Bluetooth helped on that version...
So my need is to enable my wifi connection that is dead on the CM 9.1, the phone shows enabling wifi message for a long time and never starts the wifi hardwares... any tips to help me ???
I'm Using a Xperia Arc Lt15a with CMW 5+ and CM 9.1 (FXP139 for now but this happens with any version of CM 9.XXX)...
I Know that SE made diffrent hardwares to some places of the world, so i'm from Brasil, if this helps...
Thanks in advance!!
Leonardo.
No One can help??
Theres a wifi patch addon. Install that. Look at the rom thread
Sent from my LT15i using xda premium
Install suitable baseband and libs if available.
Look at the ROM thread for supporting baseband.
Look at the thread for basebands and libs -> http://forum.xda-developers.com/showthread.php?t=1688049
Not sure why anyone would choose to flash the Beta at this stage. Flash the latest stock ROM first then CM and report back.
Thanks
Hi, Guys,
Thanks for all replys... i'll try the basebands, but need to read more about it, i don't know wich version is the correct for my device or location, ...
I want to install CM 9 because its faster then the original from Sony, i'm using, the firmware from sony but it's realy slow.. and constantly freezes...
Thanks,
Leo.
leocarv said:
I want to install CM 9 because its faster then the original from Sony
Click to expand...
Click to collapse
Do what I said above, I've never had any wifi issues CM9 and the reasons you are is obvious.
Hi, I recently installed Racing Bean 2.0.1 with Fusion 4.0 kernel and flashed the Modules.zip I found in the Fusion 4.0.zip on my ARC S
The wifi isn't working, than i tried many times to wipe everything and flash again, with no benefits, the wifi still doesn't work
Same thing after flashing Fusion 4.3 and relative modules!
I used the search but I didn't find anything about this specific problem so I hope someone can help me :good:
Thanks
Well,I didnt have this issue and it shouldn't normally happen,but u can try leaving your wifi on and flashing the modules again(after flashing your rom that is).READ mechmetal's thread on wifi not working(the second post)..i can't help you if this doesnt work
Hello, I am new in this forum and have a question about Beanstalk.
I have rooted my phone, installed the Kernel from the zip of the rom and then flashed the rom. Mostly all is working, but my wifi is really really slow.
And this is since I installed the rom, before the speed was a lot faster. The search didn't help me very much and google either.
So maybe someone can help me here?
I have tested Wifi fixer but it didn't change anything.
Sorry if this question is stupid, but I am not really an expert about ROMs.
Yup,
Beanstalk run whit the darkkernel 20131024, like CM10.2 LX , i test Beanstalk, LX, Carbon and i can't turn on wifi even whit the dark kernel wifi module 20131024. I think it's a kernel problem ... just wait for the next version...
I now found a solution and it seems to work, but I can't promise ^^
Flashed the TWRP Kernel (http://forum.xda-developers.com/showthread.php?t=2075549) and all is working and wifi ist now a lot faster
falshing
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
dropsy1234 said:
hi
its the first time i'll be using TWRP...
is this ok to change between CWM and TWRP?
i mean, can i freely go back to CWM if TWRP wont work?
thank you...
Click to expand...
Click to collapse
I had no problem to change between them, but it's different from persom to person whyever.
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
plugsmustard said:
Hello,
I recently needed an emulation machine for work. So I took my old note 2 rooted it and downgraded it to 4.1.1 so I could connect my wiimotes (the main purpose of this) for said emulators. As you all know I'm sure the Bluetooth stack is missing the protocol for this connection type. In 4.2+
My question is.....is there anyway to make a custom ROM for the note 10.1 2014 edition that is based on 4.1.1?
Thanks.
Click to expand...
Click to collapse
Did you try with Xluco's kernel ? it has written to have the ability to support Wii Controller ( If it worked , let me know , because I'm cooking Prime V5 and It's also going to have the Wii Controller support too ) .. I'm waiting eagerly for you'r results
With Best Wishes
Hitman1376
I'm gonna sound like a noob. But to be honest kernels are the things I never screwed with. Do i just flash this with twrp?
It's got the rooted 5.1.1 fw on it and just to clarify it's the SP600
I've got everything I need here (including the Kernel I downloaded) at work so.....
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
plugsmustard said:
Okay so I flashed the kernel using twrp and unfortunately the wiimotes would not connect using blue IME or the old Wiimote Controller app.
Is there something I'm missing or does it just not work for me?
Click to expand...
Click to collapse
So , I guess It means that the drivers are not compatible or maybe even not working at all ... If it's possible , flash a 4.4.2 TW stock ROM and try this kernel HERE ( If you're currently on 5.1.1 you need to flash a stock ROM using Odin ) ... this kernel I provide you is one of Xluco's KK kernels ... I'll wait for you'r results then ... Good luck
With Best Wishes
Hitman1376
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
plugsmustard said:
Re did everything. Installed 4.4.2 and the kernel you mentioned and it still does not work with either application.
Error: bt socket connection failed
Is there a difference between stock and TW stock cuz I installed fresh stock then rooted it and installed that kernel
Click to expand...
Click to collapse
plugsmustard said:
Regardless of whether TW stock is TouchWiz
I installed a 4.4.2 TW stock rom with root and installed the same kernel. Still nothing.
I don't know what I'm talking about here but is it really this difficult? I'm know it is to some degree, but how has this not been rectified a million times over?
Lost cause then?
Thanks to everyone who accomplishes these things and a massive thanks to the people who make the things we use to do these things...lol
Click to expand...
Click to collapse
Well , I'm Sorry to say that but , I guess there's no solution for getting the Wiimote to work on you're TAB ( Actually , XBOX & PS remotes are all accepted with Xluco's or even my kernel ) But , as you can see in many other threads , It seems like currently there's no way ... Don't worry MAN , I personally don't have a Wiimote let's just take it easy ... just enjoy the latest TW ROM with Prime V4 ( actually , V5 is in it's way !! )
With Best Wishes
Hitman1376
Well damn. I guess I'll just have to use my note 2 with the tv out.....no sound though.
Thanks. And I'll definitely install they new prime v5