Related
Hi Guys ..
i have a new note2 ALJ1 baseband, ALJ3 build .. stock Thailand firmware.. rooted then stock kernel put back. no updates showing on kies.
MY phone is not changing from edge to 3G/H++ automatically.
Thailand has sketchy 3g coverage so changes a lot.
when i am in an area that has 3g activating data the phone seems to prefer going to 2g/edge instead of 3g ..
and the only way o seem to be able to use 3g is by changing network mode from auto to WCDMA ... then having to remember to change back after i finish internet usage or i will not even get a phone reception when i get out of a 3g area
its not a sim card problem i do not think .. i had an S2 then a S3 with the same card and did not have this problem
I've met one other person having the same issue locally
i've tried *#197328640# and aquisition order is umts-gsm.. cannot change as it always says invalid choice
is there a hidden settings menu perhaps for setting preferences on priority perhaps ?
I bought my n7100 on taobao here in China, and it's a Korean version. I put my China Mobile sim card in, and it makes and receives calls, and text messages and can use wifi with no problem.
The only thing is the mobile data doesn't work. I rooted and tried tweakker, and HiNet, to reset my APN and MMS settings, but that didn't work. My phone still thinks I'm roaming.. it displays
this message "Data Roaming, You have lost data connectivity because you let your home network with data roaming turned off".
I've also tried updating the APN and MMS settings manualy with information i've found on the web.
I've googled and searched this forum and I can't find much. I thought it would be an easy APN settings fix but it seems not to be...
I took my phone in to the local China Mobile store they couldn't fix it. I took it to a local android expert here and they didn't know what to do.
Any ideas would be greatly appreciated.
If you bought a Korean Note 2, you don't (shouldn't) have an N7100. I also purchased one through Taobao.
You should have an SHV-E250S, E250L, or E250K. Which one do you have? Check the baseband version under Settings > About device page.
No matter what, you're going to be limited to 2G only with China Mobile.
You're right, It's SHV-E250S, and I'm fine using the 2g in China on China mobile, but I'd just like to know how..any help?
Baseband Version is E-250SKSVLJK
Try removing all modifications to your APN settings.
Next, go into Settings > More settings > Mobile networks > Network mode and change it to GSM only. Also make sure that Data roaming is not selected. Run a new scan for network operators while you're in there to refresh your APN settings to the right ones.
In data network mode I only have 2 options "3g only" or "LTE Preferred" I have it on 3g only. I have now unchecked data roaming, but I don't see any place to scan for network operators. I have included a few screenshots here, sorry i don't know how to insert them.. http://tinypic.com/r/2198djn/6 http://tinypic.com/r/24dhfmx/6 http://tinypic.com/r/2zof98w/6
Now it's obvious why you don't have data. Is this the stock Korean ROM? Are you rooted?
I can point you to a decent ROM that will fix all of this, provided you have the patience to fix it. It's relatively easy.
Yes it seems to be the stock Korean ROM. I am rooted using http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 I'm more than willing to flash another rom. I've put about 20 hours into this so far, I imagine I can muster enough patience to finish it
Once they give us a damn Korean Note II section, this kind of information will be a lot easier to find.
Try this ROM for now, it's the one I've been using for a few weeks and I love it.
Link source: http://koxda.com/thread-98683-1-1.html
ROM Download: http://pan.baidu.com/share/link?shareid=149494&uk=3355956772
Password: koxda.com
Thanks a lot the rom (715mb) is downloading now, I have tried to flash ROM's on my old galaxy nexus, and on this note II, but I never succeeded, can you please link me to a good guide, on how to flash this rom? thanks.
Odin is included in the download. If you're using Windows 7 you may or may not have the drivers for the phone, and can grab them out of the All-in-one Toolkit. Just installing the toolkit should install the drivers necessary.
http://forum.xda-developers.com/showthread.php?t=1923956
The ROM you're downloading has two files and two pictures, as well. Open the pictures and follow along. All you have to do is click two buttons, select two files, then hit start. It WILL wipe your phone.
I installed that rom you suggested, I went into settings and did GSM only, and had it automatically find my network (china mobile) selected it, rebooted, and still it says i'm roaming so there is no connectivity... any more ideas?
Can you try somebody else's SIM?
There's no reason you should not be getting service unless something is not right with your SIM or phone.
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
my gf will be home from work in a couple hours, I can try her sim card then.. my sim card was cut by me for my old iPhone.. is it possible or likely that the phone can still make and receive calls, but that somehow data connectivity was affected by me cutting the card? also one guy at the phone fixing store tried his sim card (from another company) and internet worked fine he said..
dadroidda said:
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
Click to expand...
Click to collapse
China mobile have various sim plans, from local to province to national. Are you using the sim in the same city in which you bought it? If not and you don't have a national plan, it could be why the phone is showing roaming. In China going from one province to another is already considered roaming unless you have a national plan. This is from my experience back 2 years ago. Also, you best check at a China mobile shop if you have data activated, gprs/edge is not activated by default, you need to ask them to do it.
I would advise you to switch to China unicom as they have 3g/hspa which is much faster than china mobile.
Sent from my GT-N7105 using xda premium
For clarfication, I am in Hainan, and the card is from hainan. I use the same sim card in my galaxy nexus without any problem. I tried my gf's card just now, it didn't say any problem with connectivity, and did not display roaming.. And it shows the G symbol (for 2 or 3 G I assume), and has up and down arrows next to it.. but it doesn't actually work for browsing the web or using apps over the data network.. I even reset all the APN settings and let it automatically find the China Mobile network, but it didn't help.. what if I try to set the APN settings manualy? and any other ideas??
Showing the G symbol is GPRS, which is 2G. You will not get 3G on the N7100, N7105, or Korean model Note 2 on China Mobile.
Sounds like you need a new SIM card. You can try to set the APN manually to make the data work with hers. I've never had to set an APN manually and I've used many phones here with all 3 carriers, so it's a bit odd to me. No clue why your card doesn't work, but since hers is working fine, it's definitely not your phone.
For the record, her card displayed G, but even after messing with settings, I couldn't get it to have working data network..
Today I bought a new card, and had it officially cut to size, put it in the note II and it's still telling me no data connectivity due to i'm roaming.. i'm so frustrated
edit: after restarting a few times and trying to automatically make it register on china mobile .. it worked on the 4th attempt.. it still displays data roaming, and I had to enable data roaming... but now it works, even though it says i'm roaming?? wtf
Ive the same problem with my Korean galaxy note 2 all voice service work perfect but when I tried to turn on data it says insert Usim Card to access network please help
I have just received an i747 from a friend and had unlocked it to be able to use my T-Mobile SIM. Now the phone works but I cannot call out OR receive calls unless the phone is on EDGE. If it has a 3g connection I cannot call out or receive calls for some strange reason. When I try to call out it will not ring and hang up after about 20-30secs. I can also not if I turn the data off completely.
The IMEI does match the back off the device and i have system reset the device. I tried it while on: stock unrooted 4.1 / 4.4 , stock rooted 4.4 , and a custom rom (currently SlimKat). They all do the same thing.
Any fix for this would be great. My best guess is there is something wrong with my efs folder but everything seems to be there so I am not sure.
At the very least is there a way to disable 3g all together leaving only Edge and LTE? Although this is a last resort.
Thanks.
Edit: I forgot to mention that messaging and data connectivity work absolutely fine and I haven't had a problem with that.
Does T-mobile use AWS in your area? I read that AWS has to be renabled each time you start/restart the phone. The i747m (Canadian version) software doesn't natively support AWS.
if thats the case found this
http://forum.xda-developers.com/showthread.php?t=2344627
"all i can really do , is stay out of my own way and let the will of heaven be done"
Is there a chance the dropped calls could be due to an incorrect APN setting?
^^I thought APN settings affect data only and network type (gsm, wcdma) affect voice calls.
audit13 said:
^^I thought APN settings affect data only and network type (gsm, wcdma) affect voice calls.
Click to expand...
Click to collapse
You're correct, once again I put mouth/fingers in motion before fully engaging brain. APN does control data, internet, mms, etc. I guess I was thinking AWS was related to data frequencies instead of voice frequencies.
^^ No worries. We're all here to learn from each other.
hello every one.
My lte doesn't work. I already test with the rom paranoid and CM.
I m from morocco our 4g is new and i think is the same as the europe 4g (lte).
Do you have any idea ?
Pls help
Thank you for your time
up
Help pls i need to flash modem ?
Which carrier are you using in Europe? Are you roaming from T-Mobile or have you purchased a different service/SIM card in Europe?
Also, what country are you in specifically?
There was a guide somewhere on XDA regarding Qualcomm processors and band unlocking using QXDM (LTE) and QPST (GSM/WCDMA) though I forget the exact name. I believe there was also concern that it could damage antennas. Also I have no idea if it actually works and mucking around in the NV RAM space is very risky. I would not advise it.
Is at least the GSM service working? If so, is it really that bad that you need LTE? Personally I would leave it at "oh the gsm works, I'm good". :good:
Depends on the carrier you are using, is your phone unlocked? I would assume that it is since your can receive gsm signal.... Anyways, what you would want to do is check your network's APN and check our phones APN settings and add the 4g/LTE APN settings to your phone manually... Then restart your phone and try again, make sure you select the apn after adding it so you know it's active. Try that. If that doesnt work, then go into your APN settings again and just do (reset apn setings) or something along the lines of that which resets/restores your apn settings back to normal/default.... either one could work, try the first one first ofc! G:L:
Hello everyone, first of all I would like to apologize because I am French and I don't speak English very well, but I think you are my last hope for the trouble I am currently experiencing.
I own a Samsung Galaxy Note 10+ (SM-N975F) with a Rom Surcouche Operator Bouygues Telecom :
- N975FXXU4CTE9/N975FBOG4CTE9/N975FXXU4CTE9
I wanted to remove my Bouygues Telecom Rom Operator to install a Samsung Rom Stock without any overlayer operator. The operation is well finished so I am now on the Samsung Rom Stock:
- N975FXXS6DTI5/N975FOXM6DDTH7/N975FXXS6DTI5
Except that since this change of Rom I have almost no more 4G+ where I live knowing that before I was always in 4G+ So I would like to know why just by having changed the Rom I lost my 4G+. ( Worries which lasts since September 21st, 2020 ) I wanted to go back but I passed from a bootloader 4 to a bootloader 6
Knowing that I'm with the Free operator, I tested my Free SIM card in my wife's Samsung, I'm getting 4G+ so the problem is not my SIM card, I also sent my phone to Samsung, the phone has no hardware anomaly so it's from the change of Rom, I tried to reinstall the same problem, I also made the wipe I tried everything ...
I also have at home a 4G+ router with a 4G+ plan with the operator Free and I am in 4G+ at full speed ...
I hope to get some help from you because on the French forums I don't have a single answer ... Thanks in advance for your help and sorry again for my english
Test the internet speed on both phones using your sim's data plan with speedtest. If the speed is the same in both then the problem of the 4G indicator is only aesthetic.
Hello bigcalvin, unfortunately I have tested but the speed is not the same at all in 4G+ I go up to 235Mb/s while in H+ I go up to 3Mb/s so there is no problem with the 4G indicator
thominekevin76000 said:
Hello bigcalvin, unfortunately I have tested but the speed is not the same at all in 4G+ I go up to 235Mb/s while in H+ I go up to 3Mb/s so there is no problem with the 4G indicator
Click to expand...
Click to collapse
Have you tried in different areas? What it seems like, is that the stock Samsung ROM is not compatible with your carrier. With system on a chip (SoC), carriers can turn off bands that they don't need, or as a means of locking you into their network.
Sent from my SM-N976V using Tapatalk
Honestly I'm not going to lie to you I've tried everything I've tried a Bouygues télécom rom (bog) a SFR rom (sfr) a France télécom rom (ftm) and a Samsung stock France rom (xef) with my old Bouygues télécom rom (bog) bootloader 4 I always get the 4G+ since I changed my rom and I switched to bootloader 6 I never get the 4G/4G+ again and I sometimes get the 4G+ logos but there are 10 seconds left and then switch to the H+. ..
Hello, sorry for the double post but I don't know where to find help you wouldn't have a solution to my problem? Thanks in advance
I don't understand anything anymore on this phone knowing that my wife and at free and I can receive the 4g very well. I have a 4g router, I can receive the 4g free and my phone since the update doesn't receive anything anymore, I have to go out of my house and walk a good 100 meters to hope to receive the 4g whereas I didn't have this problem before I made the really strange update...
No one would have a solution to give me or manipulation to do I take all the information.
Try a "reset network settings" if you haven't already.
Clear the system cache on the boot menu; it never hurts to do so.
Hi, thank you for your answer unfortunately I have already reset the network settings I have also done the factory settings system cache also reinstallation of a new rom I had to do it about twenty times but still nothing :/
thominekevin76000 said:
Hi, thank you for your answer unfortunately I have already reset the network settings I have also done the factory settings system cache also reinstallation of a new rom I had to do it about twenty times but still nothing :/
Click to expand...
Click to collapse
Yeah pretty basic stuff... that's all I got
Most likely a settings issue but you probably know more than myself at this point to troubleshoot this problem.
Try doing Google searches and view the results for other Samsung phone models and years.
Most times I can find a solution like this or trip over it as an indirect result while searching.
Some of the Samsung software issues have been around for years...
I've already searched everything on google I'm French I've searched on English forums and everything but I can't find anything at all.
I am in France with the mobile operator "Free" which uses the frequencies 700mhz/1800mhz/2600mhz I would like to know if there is a possibility on this phone to choose the frequency that I want one by one I have the impression that it is my 700mhz frequency that has a problem on my phone :/
By using the free App 'Shortcut Master (Lite) from Google Play, you can get access to the Network Settings. In there you can make Band Selection, allowing you to test network connections and performance per band (=frequency) or combinations of bands.
See following thread: https://forum.xda-developers.com/ga...guide-hidden-network-settings-exynos-t3995501
Hope this helps!
Hello OnnoJ, unfortunately I have already tested with this application so it doesn't work. However I compared everything with my wife's phone a Samsung so I have exactly the same settings as on her phone ...
I have to go out of my house and walk a good 200 meters to hope to get 4G, however I specify that before I made this famous update I was always in 4G at home inside and outside of the house and this is not a concern of the mobile operator because otherwise my wife would have exactly the same problem as I have now and I would also have exactly the same problem on my 4G router ...
I think I've done everything and above all I've tested everything and unfortunately I had Samsung on the phone and they put the blame on the operator whereas as explained above my 4G router and my wife's phone have exactly the same mobile operator so they would have the same problem as me ... ...
I would try to revert to the newest firmware that your carrier uses, just to see if the issue is about the bands, search for the latest firm for your carrier, provided that it is of an equal or higher bootloader version to the one you currently have installed, that is what I would do
@thominekevin76000.
Not saying it may help you, but the application works fine for me to access network settings. I use it all the time, as it helps me at home and at work to make the optimum band selection for that specific location to prevent hopping between different cell towers and to have a stable and fastest possible 4G+ connection. CellMapper app allows me to see connection possibilities with the various cell towers and their power.
Hello winol, I can't go back to my old Rom because I had a bootloader of 4 and now I switched to a bootloader of 6 so I can't go back :/)