I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume
I recently purchased a wireless headphone/headset for my HTC Tilt2, installed via bluetooth no problems. However, there's no sound control - the phone sound controls do not work on it. I'm hoping there's a registry setting I can change. Any suggestions?
Not the greatest solution
The only thing I could come up with was to download/install a different media player that had an equalizer and separate volume control. Then I could adjust the preamp level down to about 25% and adjust the volume through the program. Only downfall to that is finding the right media player. I've gone through three of them and all them have sound different through the headphones - not really sure why. I'm using Nitrogen now but would like to find a different one if anyone has any suggestions.
Here's a tough question - not necessarily difficult to answer, but difficult to ask correctly.
Is there any possibility to change the "sound type" of a particular program without actually having access to the program source code (e.g. via an external application/setting)?
By "sound type" I mean the value which is shown when you use the side volume keys while the program is running. E.g. when playing music and you use the vol+/-, it will display "Media volume", when in the Home screen and you use the vol+/- it will say "Ringer volume" etc.
I'm using the Desire as my main in-car device. The sound goes over Bluetooth to a Motorola T505 handsfree/FM transmitter and from that one to the car radio via FM (yes, old car radio, no built-in Bluetooth).
The reason for which I need to change the sound type is because if they sound types are different, they can be adjusted independently - i.e. music volume to 50% and ringer volume to 30%, so that I don't get a heart attack when the phone rings.
The problem is that my navigation software (iGo Amigo) and HTC Media player both seem to use the "Media volume" designation for their sound output, so I cannot adjust them separately. This results either in listening to a very loud navigation or to low volume music. Other navigation software have their sound type as "Alert volume", so they can be set separately.
Any idea how/if this can be changed somehow? The Desire is completely stock, unbranded, running 2.2 and the latest OTA updates.
Thanks!
LE: in more elevated terms, this is the thing (well, the other way around) - http://stackoverflow.com/questions/2744752/enable-media-volume-slider-in-android-application
airwave88 said:
Here's a tough question - not necessarily difficult to answer, but difficult to ask correctly.
Is there any possibility to change the "sound type" of a particular program without actually having access to the program source code (e.g. via an external application/setting)?
By "sound type" I mean the value which is shown when you use the side volume keys while the program is running. E.g. when playing music and you use the vol+/-, it will display "Media volume", when in the Home screen and you use the vol+/- it will say "Ringer volume" etc.
I'm using the Desire as my main in-car device. The sound goes over Bluetooth to a Motorola T505 handsfree/FM transmitter and from that one to the car radio via FM (yes, old car radio, no built-in Bluetooth).
The reason for which I need to change the sound type is because if they sound types are different, they can be adjusted independently - i.e. music volume to 50% and ringer volume to 30%, so that I don't get a heart attack when the phone rings.
The problem is that my navigation software (iGo Amigo) and HTC Media player both seem to use the "Media volume" designation for their sound output, so I cannot adjust them separately. This results either in listening to a very loud navigation or to low volume music. Other navigation software have their sound type as "Alert volume", so they can be set separately.
Any idea how/if this can be changed somehow? The Desire is completely stock, unbranded, running 2.2 and the latest OTA updates.
Thanks!
LE: in more elevated terms, this is the thing (well, the other way around) - http://stackoverflow.com/questions/2744752/enable-media-volume-slider-in-android-application
Click to expand...
Click to collapse
does igo not have an internal volume adjustment? i know copoilot does, so i can set my media volume to full and then adjust the actual volume level off the app independently
None that I could find, it seems to be stuck with some default values (iGo MyWay 2009).
Wondering if in Android there's an iGo configuration file similar to sys.txt on WinMo... might be able to set it there.
Hi
I'm usally listen to music linking my Samsung S4 to car stereo by bluetooth or wire. My car stereo has not a great equalizer, so I prefear to set equalizer directly from my audio player (poweramp).
I'd like to know if exist any apps, plugin or media player who allows to set "Time Alignment" parameter. May be some equalizer could name it "Phase".
This parameter make a little delay in left/right speaker for getting the best listening in relations to your position inside cockpit.
How could I get this kind of function?
Hello.
My unit is MTCC-KLD6-V2.97(Pumpkin RQ0264) -> Update to KLD9-V2.98 and I modify my unit's sound output to S/PDIF.
I solder codec chip(WM8731)'s clk to WM8805 chip and convert i2s to S/PDIF. After this mod, I cannot use android system's master volume. I think reason is digital data is pass-through to WM8805 and cannot control volume.
My sound processor(Alpine PXA-H700) can control volume level but it doesn't support steering controller and HW volume adjust is too far from my seat.
Music player which has SW layer(EQ or Volume control) can adjust volume. Such as Poweramp application.
In conclusion, I want to adjust Poweramp app's volume using steering controller(During using navigation app). I already tried some approaches.
I use automagic application and rooting. But failed.
Thank you for reading. Best regards.