Develop Bugs

[Q] problem using odin

I have an international version of note ... i rooted it ..it was working fine...but i tried to change the font through A font installer ..and after that my device got stuck at the boot screen
so i tried to re install the rom from odin but it failed in between ...n then my fone started showing a screen that said that it interruption in firmware upgrade ..so i again tried flash the rom .. it didnt work this time even..so i flashed cwm recovery ..i dont know how but it flashed
now my screen is in like a loop of swm starting screen..n odin is not workin
so can nyone help me ...how to reset eveything
plssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss help me

Have you tried resetting with this http://forum.xda-developers.com/showthread.php?t=1923956
With this you can flash the stock boot image back, and hopefully after that you'll be able to flash everything else you want.
Alternatively you could flash stock Rom and Kernel with Odin.
If you have Kies installed, make sure that it is not running while Odin is running. They don't like each other.
You said you wanted to flash a Rom, what exactly were you trying to flash? Are you sure it was the right Rom for your device?

[Q]briked S3 i747

I tried to factory format my phone through TWRP, then when I tried to restart again, it never comes back.
I still have access to TWRP, but when I install zip files I downloaded, it always failed. I tried to use Odin, it failed to flash an image in.
Plz help me.
Many thanks.

Gambinohe said:
I tried to factory format my phone through TWRP, then when I tried to restart again, it never comes back.
I still have access to TWRP, but when I install zip files I downloaded, it always failed. I tried to use Odin, it failed to flash an image in.
Plz help me.
Many thanks.
Click to expand...
Click to collapse
What format option did you select in TWRP and hope you didn't accidently remove your OS? The device could fail to boot if you don't have an OS installed. You may be able to flash a complete stock restore image via TWRP. Would you recall what Android version you were on before the brick? Also what is your phone model and carrier?

Larry2999 said:
What format option did you select in TWRP and hope you didn't accidently remove your OS? The device could fail to boot if you don't have an OS installed. You may be able to flash a complete stock restore image via TWRP. Would you recall what Android version you were on before the brick? Also what is your phone model and carrier?
Click to expand...
Click to collapse
Mine was ATT S3 I747 with Android 4.3 system. I did wipe my OS during recovery. That caused the whole problem. Then I use TWRP to flash a system and a kernel in. I was unable to flash bootloader and modem in; I did not know what is the problem. The weird thing is that I successfully start my phone and used it for a while. When I rebooted it, it dies again. I tried to install the some boot update in this January. It never works again. Any advise?

Gambinohe said:
Mine was ATT S3 I747 with Android 4.3 system. I did wipe my OS during recovery. That caused the whole problem. Then I use TWRP to flash a system and a kernel in. I was unable to flash bootloader and modem in; I did not know what is the problem. The weird thing is that I successfully start my phone and used it for a while. When I rebooted it, it dies again. I tried to install the some boot update in this January. It never works again. Any advise?
Click to expand...
Click to collapse
You can try flashing a complete stock system to get your phone back to working condition. Since you already had 4.3, flashing zips often fails if there is a bootloader incompatibility. The stock restore should do it. Please go to the following thread ....
http://forum.xda-developers.com/showthread.php?t=2658486
Download the stock restore zip to your PC. Use another device or something to load it to a (micro) SD card. Insert the card into your phone. Boot into recovery mode and flash from TWRP. When done, wipe your cache/dalvik and reboot to system. Let's know if this works for you.

Always booting on Recovery F240 converted to E980

Hi. I have flashed a E980 KDZ to my F240K. It is going fine, then I rooted it, installed CWM, flashed Philz Touch, Flashed a Custom ROM, then rebooted, then I keep getting booted to the recovery. I tried many times to reboot, to no avail. Can anyone help me? Any help and solution will be greatly appreciated. Thanks.

Got the same Problem.... Only Recovery is loading and nothing more cant flash custom roms .... always error .... maybe bootloader brick ???

try this:
download and install the Hacked TWRP. reboot to recovery. Once in TWRP reboot to system. Say yes when prompted to fix root. That should get you out of the recovery bootloop.

[Q] stuck on recovery

hi,
i have TWRP installed as my recovery. i just boot to it and after i've done backup the device i rebooted it.
but instead of returning to the noraml state is booted again to recovey.
now its stuck on the recovery. everytime i reoobt to system or even poweroff when the device boot up
its still boots to recovery.
is there something i can do?
i have the galaxsy tab 3 lite sm-t110.

taiber2000 said:
hi,
i have TWRP installed as my recovery. i just boot to it and after i've done backup the device i rebooted it.
but instead of returning to the noraml state is booted again to recovey.
now its stuck on the recovery. everytime i reoobt to system or even poweroff when the device boot up
its still boots to recovery.
is there something i can do?
i have the galaxsy tab 3 lite sm-t110.
Click to expand...
Click to collapse
Im pretty sure your rom that you are running is corrupted, this has happened to me
when this happens recovery will not let you run that ROM. So it will
keep rebooting into recovery. Try this, go into recovery Wipe Data,Cache and Dalvik
then reboot, if it still doesn't work try flashing a Rom.

my rom is the orginal sumsung rom that came with the device only rooted.
i will try wiping the data/cach/dalvik and then maybe restore an old backup that i have.
thanks for the advice.

well it didnt work.
i also tried to recover a working version of my rom and still boot loop to recovery.
plus when i power it off and connect the power cord it startup automaticaly to recovery.

taiber2000 said:
well it didnt work.
i also tried to recover a working version of my rom and still boot loop to recovery.
plus when i power it off and connect the power cord it startup automaticaly to recovery.
Click to expand...
Click to collapse
I think The onlyest way is to flash a Stockrom to your Tab.
Then try to flash a Recovery to your Tab again, but i prefere CWM or Philz Touch not TWRP.

maybe i should install philz on top of twrp and then restore old backup?
i dont think i can get the orignal frimware form samsung in my country.

taiber2000 said:
maybe i should install philz on top of twrp and then restore old backup?
i dont think i can get the orignal frimware form samsung in my country.
Click to expand...
Click to collapse
The prob is, only with CWM or Philz you restore Backups froh there, is The backup froh TWRP you need TWRP as Recovery.
Download from sam The Version what is in The box .

well i found the orginal rom in .img file at samfirmware. i belive its pure stock - i know that someone of you can confrim this - but how to i flash it?
i belive is with odin buth as for the instracion. is it like flashin recovery with odin? if so i will follow that instracation and give it a go.

I have the same problem, did anybody figure this out?

ended up just reflashing the stock rom from odin instead of twrp and it worked.

Fix
bierma32 said:
I think The onlyest way is to flash a Stockrom to your Tab.
Then try to flash a Recovery to your Tab again, but i prefere CWM or Philz Touch not TWRP.
Click to expand...
Click to collapse
So I've done this before, attempting to install a different type of ROM, the only way to repair this is to return to stock via Odin. Download the stock rom in the 10.1 dev thread, reboot into download, and flash via Odin.

[Q] Urgent Help! Bricked Samsung Galaxy Tab 3 10in

Hello all i have bricked my Samsung Galaxy tab 3
I have tried rooting but it ended up giving me a boot loop
Nothing has worked, I have tried flashing a stock ROM, it was unsuccessful, i have tried a rooted ROM, it was successful though i was still stuck in a boot loop, so i flashed Philz recovery and that worked but it didn't clear anything.
I'm currently downloading another Stock ROM and I hope it works.
I also tried adb and that didnt work either.
How can I stock recover this device.

Battlecraftiser said:
Hello all i have bricked my Samsung Galaxy tab 3
I have tried rooting but it ended up giving me a boot loop
Nothing has worked, I have tried flashing a stock ROM, it was unsuccessful, i have tried a rooted ROM, it was successful though i was still stuck in a boot loop, so i flashed Philz recovery and that worked but it didn't clear anything.
I'm currently downloading another Stock ROM and I hope it works.
I also tried adb and that didnt work either.
How can I stock recover this device.
Click to expand...
Click to collapse
Have you tried using Odin to return to stock? don't forget to "uncheck" auto reboot. After flash completes, shut down, then restart.
Here's a thread for using Odin to return to stock
...and wipe/format system, data, cache etc before flashing

Which version? P5220(the LTE version) P5210(wifi only version) p5200 3g version
you can try out odin, flash everything including stock rom and recovery. Start everything all over.