Well, battery drain is like hell
Is there anyway to make it... U now, not too fast?
Also some user says that it's from google wakelock...
Sent from my C6506 using Tapatalk
I always calibrate my battery...(root needed) Flashed 4.4.2 yesterday and battery drain seem normal for now. I always make sure nfc, bluetooth, etc are off and i sont use too many widgets. I also use boot manager (root) to prevent unwanted apps to run at startup. ?
Envoyé depuis mon C6506 en utilisant Tapatalk 4
How to root the 4.4 kitkat?
Sent from my C6506 using Tapatalk
AndreIrawan97 said:
How to root the 4.4 kitkat?
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
There are already various methods in the forum !
Search !!
xtremepredador said:
Here's the best dreno in 4.4 Kitkat !
Click to expand...
Click to collapse
What?
Sent from my C6506 using Tapatalk
Here's the best dreno In 4.4 kitkat !!
Nah really, the drain is not bad at all with a calibrated battery
Envoyé de mon C6506 en utilisant Tapatalk
iPeck said:
Nah really, the drain is not bad at all with a calibrated battery
Envoyé de mon C6506 en utilisant Tapatalk
Click to expand...
Click to collapse
So.. You need root right...?
Yes
iPeck said:
I always calibrate my battery...(root needed) Flashed 4.4.2 yesterday and battery drain seem normal for now. I always make sure nfc, bluetooth, etc are off and i sont use too many widgets. I also use boot manager (root) to prevent unwanted apps to run at startup. ?
Envoyé depuis mon C6506 en utilisant Tapatalk 4
Click to expand...
Click to collapse
how do you calibrate the battery
what program it called?
i have the same problem too
never had battery program in previous version of android OS
and which program is safe to disable at startup?
thanks
App is Battery Calibration. Root is needed. Charge the phone to 100%, hit calibrate on the app and let the phone have one complete discharge before recharging again.
As for boot manager (root needed) i disable almost all apps on startup. Youll know what app to prevent from startup when you see the list.. Almost all of them dont need to be launched like this.
Envoyé de mon C6506 en utilisant Tapatalk
Related
Hello, i have problem with this app. I just bought it and installed id. When i run it, i granted to be root by SuperSU. I continued when it asked about the I9300...
Now you can see the screenshot.
When I tap the Current Status for a reboot into a special bootmode, nothing happens...
Can you Help me please ?
Blutch123 said:
Hello, i have problem with this app. I just bought it and installed id. When i run it, i granted to be root by SuperSU. I continued when it asked about the I9300...
Now you can see the screenshot.
When I tap the Current Status for a reboot into a special bootmode, nothing happens...
Can you Help me please ?
Click to expand...
Click to collapse
I had a similar problem and the reason it didn't work for me is because I was trying to run it on a stock rom. After installing a non stock rom I was able to use triangle away.
what is a "stock" rom ? My S3 use its own original rom...
,. I..
Gesendet von meinem GT-I9300
I'd like to use Triangle Away to keep the mobile waranty. I just used Odin to install Lucky Patcher... but I'm having battery problems and I'll have to send in for repair...
Your all silly. All you need to do is press the button at the bottom....
If your kernel doesn't support it then it boots and into its own kernel.
And before you say anything I was the first person to test this app for the s3 (after Chainfire himself) and I know Chainfire who built it.
Sent from my GT-I9300 using Tapatalk 2
Lennyuk said:
Your all silly. All you need to do is press the button at the bottom....
Click to expand...
Click to collapse
Which button ? i can't see any button inside this app...
Blutch123 said:
Which button ? i can't see any button inside this app...
Click to expand...
Click to collapse
In the screenshot in the op you can see it says "reset flash counter" that's a button!
Sent from my GT-I9300 using Tapatalk 2
Ok but before to reset it, I'd like to know my status to not brick my device...
Envoyé depuis mon GT-I9300 avec Tapatalk
Just press it you shouldn't brick, at least no reports of bricks yet.
Just make sure you have a supported s3 (which you should have unless you have an unreleased phone!)
Sent from my GT-I9300 using Tapatalk 2
Envoyé depuis mon GT-I9300 avec Tapatalk
Just push the button
Sent from my GT-I9300 using Tapatalk 2
sorry it was not the good one...
Your version is fine.
Sent from my GT-I9300 using Tapatalk 2
So i need to use Triangle or not ?
If you rooted then your Flash count will be at least 1, so yes. But you never have to use it, it's your choice.
Sent from my GT-I9300 using Tapatalk 2
I don't have the yellow triangle booting the phone...
Envoyé depuis mon GT-I9300 avec Tapatalk
No you won't, but if you boot into download mode it will still tell you that you are on unofficial software
Sent from my GT-I9300 using Tapatalk 2
Oh ok... So what have I to do ?
Envoyé depuis mon GT-I9300 avec Tapatalk
Blutch123 said:
Oh ok... So what have I to do ?
Envoyé depuis mon GT-I9300 avec Tapatalk
Click to expand...
Click to collapse
Press the button!
Sent from my Galaxy Nexus using Tapatalk 2
Hi, is it possible to change dpi of application without Pa rom ?
Thx
Envoyé depuis mon Galaxy Nexus avec Tapatalk
Easily. Either modify the line in the build.prop or use an app like lcd density changer.
Hi thx ! Per app is not possible ?
Envoyé depuis mon Galaxy Nexus avec Tapatalk
We have paranoid android for that.
Mach3.2 said:
We have paranoid android for that.
Click to expand...
Click to collapse
That is the reason I wrote without Pa on my post...
Envoyé depuis mon Galaxy Nexus avec Tapatalk
billouetaudrey said:
That is the reason I wrote without Pa on my post...
Envoyé depuis mon Galaxy Nexus avec Tapatalk
Click to expand...
Click to collapse
Inference.
Hi after change my dpi, some apps don't want install on playstore (incompatibility)
Any solution ? Thx
Envoyé depuis mon Galaxy Nexus avec Tapatalk
billouetaudrey said:
Hi after change my dpi, some apps don't want install on playstore (incompatibility)
Any solution ? Thx
Envoyé depuis mon Galaxy Nexus avec Tapatalk
Click to expand...
Click to collapse
Happens if you change your DPI to a non standard number.
Change it back to 320,160 or some other compatible numbers. I'm only aware at this time that 320 and 160 will work.
Mach3.2 said:
Happens if you change your DPI to a non standard number.
Change it back to 320,160 or some other compatible numbers. I'm only aware at this time that 320 and 160 will work.
Click to expand...
Click to collapse
160 seems too low. 240 seems to work fine for everything I've used.
Okey I'm 250...I try 240 so... Thx
Envoyé depuis mon Galaxy Nexus avec Tapatalk
Hi,
I have searched a lot about application that monitors temps of cpu's and batteries buti couldn't find anyone .
So please , would you mind telling me if such application exists ? I really need it .
Thank you
Envoyé de mon Nexus 7 en utilisant Tapatalk
Xanatak said:
Hi,
I have searched a lot about application that monitors temps of cpu's and batteries buti couldn't find anyone .
So please , would you mind telling me if such application exists ? I really need it .
Thank you
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Try this: https://play.google.com/store/apps/details?id=ccc71.pmw
Actually my device isn't rooted , i tried this app but it doesn't display any temperature . thanks though
Envoyé de mon Nexus 7 en utilisant Tapatalk
Xanatak said:
Actually my device isn't rooted , i tried this app but it doesn't display any temperature . thanks though
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
I use this, free, works great, no root needed...no CPU temps, but has battery temp, now, for BOTH battery and cpu temp, look into System Monitor Lite.
Thank you , guess i'll give it a shot
Envoyé de mon Nexus 7 en utilisant Tapatalk
Hi everyone!
One of you could post a screenshot of s4 mini default voltage vamuesbbecause i dis a mistake with 2 or 3 levels.
If i want return to the basic configuration (+100 volts), should I do it gradually or can I do it directly? Thanks a lot
Envoyé de mon GT-I9195 en utilisant Tapatalk
maquille said:
Hi everyone!
One of you could post a screenshot of s4 mini default voltage values because i did a mistake with 2 or 3 levels.
If i want return to the basic configuration (+100 volts), should I do it gradually or can I do it directly? Thanks a lot
Envoyé de mon GT-I9195 en utilisant Tapatalk
Click to expand...
Click to collapse
Envoyé de mon GT-I9195 en utilisant Tapatalk
maquille said:
Hi everyone!
One of you could post a screenshot of s4 mini default voltage vamuesbbecause i dis a mistake with 2 or 3 levels.
If i want return to the basic configuration (+100 volts), should I do it gradually or can I do it directly? Thanks a lot
Envoyé de mon GT-I9195 en utilisant Tapatalk
Click to expand...
Click to collapse
You can do it directly. If memory serves me right, the lowest stock speed 384MHz is 950mV.
But do note that change voltage has it own risks, make sure you know what you doing.
yes I'd like to go back to the default values. Thank you but my wrong values are on higher voltages
Envoyé de mon GT-I9195 en utilisant Tapatalk
I'm running a -25mV build so just add them back and you'll get the default values.
I suggest you adjust voltages gradually especially when decreasing. that way you will know around what voltage you get issues and can do small adjustments from there.
Hey! Thanks a lot! But on m'y memory, first voltages were 900/925/950/950... Your UV wernt -50?
Envoyé de mon GT-I9195 en utilisant Tapatalk
maquille said:
Hey! Thanks a lot! But on m'y memory, first voltages were 900/925/950/950...
Click to expand...
Click to collapse
No, I can confirm that the lowest frequencies (384 MHz and several steps up) are all flat 950 mV.
Hi people, I've recently discovered Ac Display and I'd like to know if it works on the gn2 4.4.2(stock rooted). In order to make this app work, do I have to put my lockscreen in swipe to unlock? (btw I know I have to activate it in Xposed installer)
Envoyé de mon GT-N7100 en utilisant Tapatalk
DukeNuggets said:
Hi people, I've recently discovered Ac Display and I'd like to know if it works on the gn2 4.4.2(stock rooted). In order to make this app work, do I have to put my lockscreen in swipe to unlock? (btw I know I have to activate it in Xposed installer)
Envoyé de mon GT-N7100 en utilisant Tapatalk
Click to expand...
Click to collapse
not at all it works with any 4.4. device rooted unrooted with any lockscreen
how silly you should install it before asking
I'm scared of using it xD that's why I was asking if I could entirely trust it !
Envoyé de mon GT-N7100 en utilisant Tapatalk