Hi. I flashed another KDZ in my F240K, a E988 KDZ, after trying it out I reverted back to F240S, now I have no signal, but I have IEMI, and my phone says, service disabled. Can anyone help me please? Thanks in advance!
Same HERE
I have same issue and noone help :crying:
Just check with Hidden code or Service code 5457#*240# change the network mode to WCDMA/GSM and CDMA Subscribe to USIM.
You may flash with LG Flash tool and flash with CSE flash. My OGP also have issue last time but try to Flash with CSE flash and it work. I have try many times to upgrade to Lollipop and downgrade to Kitkat no problems.
Related
i tried to install kitkat hong kong version with KDZ method on my E980 & now its bricked
tried restoring E980 firmware with TOT method but it say "device model is different"
also tried restoring recovery from LG mobile support tool but it say "no upgrade items to fix"
please help me fix this, i just got this phone 1month back & now im screwed :crying:
EDIT:
its working after flashing Central America kdz
halp
Hi good people I got problem with my LG G3 D855 I don't know it's European or what but I'm using in south Africa when I'm trying to switch ON it says LG SECURITY ERROR and goes OFF it was rooted and visions was 5.1.1 I even try to flash it with LG flash tool but it's not conecting:crying: now i don't know what to do plz I need help plz
You can check this out.
Probably if you have access to custom recovery and you change the kernel could fix the security error.If not you could try to flash a stock firmware with flash tool and reroot your phone.
[Guide] LG G3 Stock Firmware (Go Back to Stock) KDZ & TOT Method
moon125 said:
Hi good people I got problem with my LG G3 D855 I don't know it's European or what but I'm using in south Africa when I'm trying to switch ON it says LG SECURITY ERROR and goes OFF it was rooted and visions was 5.1.1 I even try to flash it with LG flash tool but it's not conecting:crying: now i don't know what to do plz I need help plz
Click to expand...
Click to collapse
Surely you're not referring to the "Secure Boot Error"?
It happens for recovery access or affects the normal bootup too?
In both cases you have to put device in Download Mode and flash a "bumped" recovery (TWRP is highly preferable).
If the issue persists, you have to restore the stock rom with the LG Flash Tool 2014 by doing a "CSE flash" and lose all data.
If you not solve, your device is officially compromised and ****ed up.
The warranty won't guarantee assistance for broken phone with custom rom or recovery installed.
hello everyone
i don't know about android that much
when i first bought my lg g3 LS990 "sprint device" i had some issues with the 3G/LTE since i live in middle east and the only way to access 3g signals is through CDMA??!
anyway... i went to a repair man and told him about my problem he rooted my phone, flashed a custom recovery "TWRP", then flashed a custom rom
when everything was done he managed to fix the 3g signals some how but the phone still wasn't able to get 4g signals
the weird thing is that when i checked the system info the mobile's model was changed from LS990 to D855
i didn't pay much attention to that back then but in the meanwhile i did some stuff and i had to flash a custom rom so while doing that my phone soft bricked
now i'm trying to flash stock rom again the problem is when i tried to flash LS990 stock rom i had an error message that says "device model is different"
and when i try to flash D855 rom it proceeds to 6% then an error message occurs says "partition change fac... 00000064" can't see the whole error message cause flash tool is not re-sizable
so now im not able to flash D855 model's rom or ls990 one
what should i do please i need help if anybody knows
would try anything thanks in advance
my phone was AT&T g pro that is E980 with an android version 4.4.1 and i updated it to 5.0 with a kdz of 240L that is U+
at the end of the CES flashing (done of flash and installation of apps) i realized that my network signal is down that means no bar of a net signal but always searching for networking .so with this problem i decided to return to my old AT&T operating system ,in which i still faced the same network problem that i had after CES flashing of the kdz file. but before U+ i was having full network .please any help
bro.... i did the exact same thing u did. what i read in several other post was some people figured to solve the problem by flashing our g pro e980 with the mexico telcel e980 kdz to get the signal fixed then flashed the g pro e980 att TOT image. i tried but no success with my phone. give it a try, i hope ur phone gets fixed.
nana prempeh said:
my phone was AT&T g pro that is E980 with an android version 4.4.1 and i updated it to 5.0 with a kdz of 240L that is U+
at the end of the CES flashing (done of flash and installation of apps) i realized that my network signal is down that means no bar of a net signal but always searching for networking .so with this problem i decided to return to my old AT&T operating system ,in which i still faced the same network problem that i had after CES flashing of the kdz file. but before U+ i was having full network .please any help
Click to expand...
Click to collapse
Check your IMEI. Probably corrupted EFS partitions... I really hope you have a EFS backup.
hello guys
i wanted to go back to stock of my lg f180l after i flashed kdz i lost imei number i dont have efs backup but i have my imei on the box i was trying everything but it wont work i am stuck with application called QPST which can retrieve my imei but QPST configuration cant detect my phone does anyone know what to do?
SORRY FOR MY BAD ENGLISH
so i figured out the problem i couldnt belevie it was that easy when i took out the sim card slot and turned on my phone without it imei came back then i put in sim card and Boom its working
just download and flash kdz L u+ version 30c or latest. you will have you imei back.i also have f180l version, always worked for me
nabeelahmadsamiullah said:
just download and flash kdz L u+ version 30c or latest. you will have you imei back.i also have f180l version, always worked for me
Click to expand...
Click to collapse
i already tried that it didnt worked but i figured out the problem 2 weeks ago
great