Hi people, quick bit of help if possible. Received my X9006 a couple of days ago. I initially flashed TWRP on it and then rooted, all went perfectly. I then found that I couldn't flash OS 2.0 with this, so reverted back to stock recovery and the stock recovery root. This fixed the issue and OS 2.0 installed flawlessly. I have since tried to re-flash TWRP but it just doesn't want to work. Is there some compatibility issue? Would I have to revert back to OS 1.2 and then flash TWRP and SU to be able to install any other ROMs in future? Apologies for what seems like a stupid question as I'm sure it's something obvious but my brain is fried. Thanks.
Hi, I flashed twrp after installing 2.0. No issues. Did you erase cache?
Edit: or you could try flash tool from play.
With our unlocked bootloaders there is nothing stopping you from flashing a different recovery at any time.
Show us the output from your fastboot commands to help.
BTW, you can flash official Oppo updates in TWRP by removing the (usually first two) assert lines looking for Find7 in the updater-script.
Related
Hi guys,
I am getting DESPERATE here. Because of a mistake, I had to reflash stock LG ROM 50020d 4.4.2. From there, I rooted using geohot's towelroot and used Flashify to flash this TWRP 2.8.0.0 After 128754E10th attempt, it worked. I experienced all kinds of recovery loops when I used files for 4.2.2 base (because someone mentioned it's needed to prevent brightness issue) but it caused my recovery to go into some strange loop. So I reflashed the recovery.
Now I can enter TWRP 2.8.0.0 but I cannot, cannot, cannot flash yesterday's CM11 nightly for my device. When I try, log says:
Code:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/cm-11-20141101-NIGHTLY-v500.zip'
Error flashing zip /sdcard/cm-11-20141101-NIGHTLY-v500.zip
Updating partition details
I am truly desperate. I even fixed the name of my device in build.prop to v500 (before it was 'awifi' for some reason) but still no dice.
Please, is there someone to give me some clear instructions? Thanks a lot guys.
TF666 said:
Hi guys,
I am getting DESPERATE here. Because of a mistake, I had to reflash stock LG ROM 50020d 4.4.2. From there, I rooted using geohot's towelroot and used Flashify to flash this TWRP 2.8.0.0 After 128754E10th attempt, it worked. I experienced all kinds of recovery loops when I used files for 4.2.2 base (because someone mentioned it's needed to prevent brightness issue) but it caused my recovery to go into some strange loop. So I reflashed the recovery.
Now I can enter TWRP 2.8.0.0 but I cannot, cannot, cannot flash yesterday's CM11 nightly for my device. When I try, log says:
Code:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
E: Error executing updater binary in zip '/sdcard/cm-11-20141101-NIGHTLY-v500.zip'
Error flashing zip /sdcard/cm-11-20141101-NIGHTLY-v500.zip
Updating partition details
I am truly desperate. I even fixed the name of my device in build.prop to v500 (before it was 'awifi' for some reason) but still no dice.
Please, is there someone to give me some clear instructions? Thanks a lot guys.
Click to expand...
Click to collapse
Have you tried with another build of CM11? Perhaps the latest milestone? Have you wipe:d all the data and cache and stuff? Can you tell me how you got the TWRP on there? Did it work the first time you flashed the 4.4.2 version? Where you on the latest version of android before rooting?
Thanks for your effor, djmiek.
I managed to fix it yesterday. Nothing was out of ordinary - TWRP 2.8.0.0 (specifically for v500) was flashed using Flashify. Phone was rooted (see my original post) and I wiped everything properly before flashing CM11. However, for some reason there was no way to install nightly from 11/1. Everytime I tried to install, I got aforementioned error message.
So I got fed up with all that and just went and restored my whole tablet to a backup from april (50010b) which I very wisely did just after rooting the brand new device. This reverted TWRP to 2.6.3.2 and as soon as I booted recovery I could install that nightly without any hassle. No incompatible data, no bull like that - everything went smoothly. I don't know if there's a problem with TWRP 2.8.0.0 and current CM11 nightly combo but I sure as hell will stay away from it.
So, the moral of the story - BACKUP any working installation folks! Do not underestimate the power of word "restore". It feels goooood
TF666 said:
Thanks for your effor, djmiek.
I managed to fix it yesterday. Nothing was out of ordinary - TWRP 2.8.0.0 (specifically for v500) was flashed using Flashify. Phone was rooted (see my original post) and I wiped everything properly before flashing CM11. However, for some reason there was no way to install nightly from 11/1. Everytime I tried to install, I got aforementioned error message.
So I got fed up with all that and just went and restored my whole tablet to a backup from april (50010b) which I very wisely did just after rooting the brand new device. This reverted TWRP to 2.6.3.2 and as soon as I booted recovery I could install that nightly without any hassle. No incompatible data, no bull like that - everything went smoothly. I don't know if there's a problem with TWRP 2.8.0.0 and current CM11 nightly combo but I sure as hell will stay away from it.
So, the moral of the story - BACKUP any working installation folks! Do not underestimate the power of word "restore". It feels goooood
Click to expand...
Click to collapse
Is 50010b also 4.4.2 or is it earlier? Did you just flash TWRP with flashify then after rooting?
I think it was 4.4.2.
My initial root after purchase was done according to http://www.youtube.com/watch?v=05T3mYVnYYE
Everything went smoothly then, but I think you'd achieve the same outcome using Flashify.
Hi,
i have a Helium 128G and got some problems with the radio. Currently i was on 8.1.5 following the guide
http://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594
and i also officially unlocked the bootloader after this.
So i thought - to flash a new radio - it would be fine to just flash the 8.1.9 over the updater method. Unfortunately the phone rebooted in TWRP and flashed something. After this the reboot took >10 Minutes so i rebooted into TWRP and found the internal storage is encrypted now. So all data lost. Great!
Nevertheless i tried to flash 8.1.9 via Mi Flash. This worked and the phone booted but after i flashed TWRP it won't boot anymore. What is this? Is it even possible to run 8.1.9 rooted with twrp?
Thanks for your suggestions, i'm really pissed at the moment
EDIT: My TWRP Backup with 8.1.5 worked and now i have the radio from 8.1.9 and the rom 8.1.5. Nevertheless i would like to have 8.1.9 rooted with twrp
Hi! I've also experience your problem, did your phone entered recovery mode after flashing TWRP? if not try flashing the 8.1.2 ROM through EDL (power+vol up+vol down) then after letting the first boot finish flash TWRP. Hope this help
I'm not sure but at one point i saw the xiaomi recovery picture!? Now it works with my 8.1.5 backup again but is it really that heavy to just install a current version when on twrp and root!? i'm officially unlocked for that.
Hi, I flashed the FOTA Kernel with TWRP 2.8.7 onto my phone and inside TWRP I flashed the recovery with the 3.0.2 TWRP image (telling me "Successfully flashed")
But after rebooting I still have TWRP 2.8.7
Using windows command line and "fastboot flash recovery "TWRP.....img" I get this "FAILED" message.
What am I doing wrong?
I even flashed the phone back to stock and then followed these instructions but same result.
Is my phone broken or sth?
Hi H4NNE5, the Xperia M does not have a recovery partition. The TWRP recovery is included in the boot partition when flashing the kernel. Try to upgrade with the TWRP-Manager if your phone is rooted.
Hi Lightningsfire, Thanks for you answer.
Ok, that's weird because I read a lot of threads but none said anything like that. I'm more confused right now.
Anyhow the LineageOS is not properly working on my phone anyhow so I set it back to Stock Rom and check back in a few months if it improved
One more question:
So if I flash the whole software package the boot partition is overwritten then, right? Because I noticed that the Recovery was a different one, after I flashed the system.
H4NNE5 said:
Hi Lightningsfire, Thanks for you answer.
Ok, that's weird because I read a lot of threads but none said anything like that. I'm more confused right now.
Anyhow the LineageOS is not properly working on my phone anyhow so I set it back to Stock Rom and check back in a few months if it improved
One more question:
So if I flash the whole software package the boot partition is overwritten then, right? Because I noticed that the Recovery was a different one, after I flashed the system.
Click to expand...
Click to collapse
Try this command
fastboot flash boot twrp_name.img
I wiped the phone clean and tried to flash the new version of AEX But, it showed Error 7.
Tried looking for fix for Error 7 on internet, it didn't work for AEX5.6, 5.5, 5.4.
5.3 installs normally.
But felt like needed something new.
Went on the forums to find Xtended ROM. Flashed it.
After flashing it tried flashing Nano GAPPS.. Didn't work.
Tried to system reboot and thought I can later work it out.
ROM is all fine... But, later when I got to recovery mode.
(Problem begins)
I realised I lost TWRP.
And the recovery that's there wouldn't allow me to flash anything.
It looks more like CWM recovery but with less options.
It doesn't even have a advanced wipe!
Now I'm stuck with a non rooted phone, without Google bare minimum functionalities.
Am I alone? Help me out!
UKWZ7 said:
I wiped the phone clean and tried to flash the new version of AEX But, it showed Error 7.
Tried looking for fix for Error 7 on internet, it didn't work for AEX5.6, 5.5, 5.4.
5.3 installs normally.
But felt like needed something new.
Went on the forums to find Xtended ROM. Flashed it.
After flashing it tried flashing Nano GAPPS.. Didn't work.
Tried to system reboot and thought I can later work it out.
ROM is all fine... But, later when I got to recovery mode.
(Problem begins)
I realised I lost TWRP.
And the recovery that's there wouldn't allow me to flash anything.
It looks more like CWM recovery but with less options.
It doesn't even have a advanced wipe!
Now I'm stuck with a non rooted phone, without Google bare minimum functionalities.
Am I alone? Help me out!
Click to expand...
Click to collapse
For aex issue did you flash factory2vendor zip before flashing rom?
You will have to install twrp image using PC. Like the first time you did when you were unlocking bootloader
Flash zui using qfil or miflash.
If bootloader is unlocked still. You can directly flash twrp.
If not first unlock your bootloader and then flash twrp.
For treble rom like aex5.5 you need to flash factory2vendor.zip and then flash twrp with treble support.
For info on flashing and link visit aex5.5 rom page.
I get failed with v3 patched
Will somebody plz chime in with some knowledge here for me? I'm on 4CTD1 firmware. I rerooted. I'd like to install TWRP. The ones I've flashed won't allow me to boot into the system after flashing. It just keeps booting into TWRP. And once it booted up with SAMSUNG on the screen and got stuck. Thanks
Currently from what I have seen and experienced there is no fully functioning TWRP for latest One UI 2.1 yet that successfully boots custom GSI/ROMs without tampering with the TWRP. The latest TWRP on xda is not updated for latest firmware yet so if you was to flash and use it you will run into many problems when booting custom firmware e.g broken camera. Your best bet is to wait until further news has been updated on xda for a newer TWRP.