need help is my phone bricked? - T-Mobile, Samsung Galaxy SIII

so one of my friend gave me a galaxy s3 today, it vibrates when i click power button, and after that the blue light on the top lights up.
and the capacity button lights up however screen is black. cant hear any volumes either.
i tried to boot into recovery, and download mode but the screen is pitch black. i tried holding volume up, home power button then after waiting few seconds click volume up button( screen is still pitch black) then connected to my computer.
my computer and odin can recognize the phone, so i tried flashing stock rom but no go, screen is still pitch black.
so i thought it was the screen that was the problem. i happened to have another galaxy s 3 lying around so i disassembled both of the phones and switched motherboard. and the screen works noproblem. so im guessing its the motherboard that is the problem.
is it possible that motherboard is dead? even though my computer can recognize the phone?
or could it be like damaged?
well i guess i could try and download another rom and flashing it again but wanted to know if anyone had similar problems before.
any suggestions?

Sounds like the digitizer is shot.
Should be a semi cheap fix at the right shop.
Sent from my SGH-T999 using Tapatalk

Could be the digitizer, or it could be a dead gpu. Did you ever overclock or anything like that? Did you plug the supposedly bad mobo into the good phone to see what happens? Inspect the ribbon and solder poonts really closely too.
Sent from my SGH-T999 using Tapatalk

nono the screen works, i siwtched motherboard and digitizer screen everything is working.
but if i switch the motherboard back again its not working.
digitizer is working. idk what is problem with the motherboard

Theres probably not much you can do other than getting a new motherboard then.
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
Theres probably not much you can do other than getting a new motherboard then.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
could it be like brick? or something like jtag can fix? is there anything i can do through cmd?
i just want to make sure before i go ahead and buy motherboard.
if i can connect it to computer and computer recognizes motherboard isnt dead right?

Motherboard itself is not dead, but a component on it most likely is. Like I mentioned earlier, could be the gpu. If that failed it would explain why you get nothing on the screen.
But no, its not a brick in the usual sense. If it were, the red led would come on when connected to the computer and it would show QHS_USB in device manager. Odin would not be able to see it.
You can try getting it into download mode (hold vol down, home and power when booting up. Then press volume up after a few seconds) do not hold power long or itll just hard reboot. Then try to odin flash the firmware.
If that doesnt bring it back then its definitely hardware failure.
Sent from my SGH-T999 using Tapatalk

Related

[Q] Epic 4G power button not working...

Here's the situation, My wife has the Epic 4G, this is her 2nd replacement,and cannot get another thru the insurance. She dropped the phone, from couch to the floor, not far at all, but still dropped. The power button doesn't work now - at all. If I plug in to charger, it does light up keypad, home keys, and battery charging icon. Just no response from power button.
My question is, is there any way to turn the phone on thru the PC maybe? As long as I can get it on, then we should be good. I googled all over, but no solution found yet. Hopefully there's some way to kick it on thru the PC. Any help would be greatly appreciated! Thanks in advance!
Have you tried pulling the battery cover off to get better acces to the switch and jiggling it around a little. Maybe the switch button just got jammed in. try pulling the button outward with a sharp object. Basic stuff, i know...but it is just a switch.
Lol... thanks man. I tried everything you can think of, took the phone apart and everything. The power button is just done. I ended up running Odin3, and slid keypad open,held 1 button,and plugged in USB and she jumped into Download mode - Thank god. Ran ACS recovery.tar file,AND it reset! Now, as long as the battery doesn't die, I can wake the phone with Volume keys,and all is good. If the battery does die - then I can just run the Odin3 process again... women...lol!
check eBay for a parts phone. maybe you can frankenstein it back to good.
http://www.ebay.com/sch/Cell-Phones-Smartphones-/9355/i.html?rt=nc&LH_ItemCondition=7000&_nkw=epic%204g&_catref=1&_dmpt=Cell_Phones&_fln=1&_ssov=1&_trksid=p3286.c0.m1539
Sent from my SPH-D700 using XDA App
Wife did the same to hers, dead power button. She usually tries to keep it charged all time now, to keep it from turning off.
However, if the phone turns off or freezes, we get it turned back on by Plugging in the charger until the softkeys light up, and as soon as the battery icon turns green, unplug the charger. The phone should reboot, and if you timed it right, you'll see the samsung logo.
SerialKilla said:
Here's the situation, My wife has the Epic 4G, this is her 2nd replacement,and cannot get another thru the insurance. She dropped the phone, from couch to the floor, not far at all, but still dropped. The power button doesn't work now - at all. If I plug in to charger, it does light up keypad, home keys, and battery charging icon. Just no response from power button.
My question is, is there any way to turn the phone on thru the PC maybe? As long as I can get it on, then we should be good. I googled all over, but no solution found yet. Hopefully there's some way to kick it on thru the PC. Any help would be greatly appreciated! Thanks in advance![/QUOTE
i believe you need to buy a new power ribbon inside the phone.. sometimes they go bad. if you have the $8 insurance they should just fix it for free
Click to expand...
Click to collapse
masterbat6025 said:
SerialKilla said:
Here's the situation, My wife has the Epic 4G, this is her 2nd replacement,and cannot get another thru the insurance. She dropped the phone, from couch to the floor, not far at all, but still dropped. The power button doesn't work now - at all. If I plug in to charger, it does light up keypad, home keys, and battery charging icon. Just no response from power button.
My question is, is there any way to turn the phone on thru the PC maybe? As long as I can get it on, then we should be good. I googled all over, but no solution found yet. Hopefully there's some way to kick it on thru the PC. Any help would be greatly appreciated! Thanks in advance![/QUOTE
i believe you need to buy a new power ribbon inside the phone.. sometimes they go bad. if you have the $8 insurance they should just fix it for free
Click to expand...
Click to collapse
+1 to this. My power button stopped working when I replaced my screen myself... it worked for a couple days and then stopped working. Brought it to sprint and they fixed it for free.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
samsung epic 4g d700
SerialKilla said:
Here's the situation, My wife has the Epic 4G, this is her 2nd replacement,and cannot get another thru the insurance. She dropped the phone, from couch to the floor, not far at all, but still dropped. The power button doesn't work now - at all. If I plug in to charger, it does light up keypad, home keys, and battery charging icon. Just no response from power button.
My question is, is there any way to turn the phone on thru the PC maybe? As long as I can get it on, then we should be good. I googled all over, but no solution found yet. Hopefully there's some way to kick it on thru the PC. Any help would be greatly appreciated! Thanks in advance!
Click to expand...
Click to collapse
You need to have a jig to put the phone in download mode, then use odin to flash a stock modem this will cause the phone to reset. As stated before you can wake the phone from sleep mode by sliding it open. Just do not let the battey full drain or you will have to repeat the process. This process can be done with any "jig-able" samsung device that is flashed with odin.
Hope this helps
sinamod said:
You need to have a jig to put the phone in download mode, then use odin to flash a stock modem this will cause the phone to reset. As stated before you can wake the phone from sleep mode by sliding it open. Just do not let the battey full drain or you will have to repeat the process. This process can be done with any "jig-able" samsung device that is flashed with odin.
Hope this helps
Click to expand...
Click to collapse
How do you put the phone into download mode without a power button? I thought it was the 1 key and power.
djhspawn said:
How do you put the phone into download mode without a power button? I thought it was the 1 key and power.
Click to expand...
Click to collapse
The usb cord turns the phone on, no need for a button
Sent from my SPH-D700 using xda premium
flastnoles11 said:
masterbat6025 said:
+1 to this. My power button stopped working when I replaced my screen myself... it worked for a couple days and then stopped working. Brought it to sprint and they fixed it for free.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
did you have to unroot and return to stock before taking it in to sprint? =\
Click to expand...
Click to collapse
Silly work around
I had an Epic that did the same thing, I know there is a keyboard shortcut to power up the device but I'm not sure what it is. I was able to power mine up after about 15 minutes of smashing all of the keys on the keyboard at random at the same time. Perhaps somebody with a bit more time or understanding of the keymap might be able to figure it out.
Talk to your Local Sprint Store
For me it was the button that failed. Since the power button is a part of the keyboard assembly it required replacing the keyboard. I called over to the local Sprint store and, after some begging, they agreed to part with the keyboard from a bricked phone they had in the shop. It took very little time for me to replace it and get the phone up and running again.
Hi, my power button wont work either. It happened when I replace my screen yesterday. I cant take it to sprint because it is rooted with a custom rom. Does anyone know exactly what the problem is or what part I need. I am pretty good with androids so I think I could do it
Sometimes when you take it apart the cable goes bad ( happened to me twice) just replace the ribbon cable and all will be well
Sent from my SPH-D700 using Tapatalk 2
mpalomba3 said:
Hi, my power button wont work either. It happened when I replace my screen yesterday. I cant take it to sprint because it is rooted with a custom rom. Does anyone know exactly what the problem is or what part I need. I am pretty good with androids so I think I could do it
Click to expand...
Click to collapse
If you want to take it to Sprint, just Odin Stock FC09
Sent from my SPH-D700 using Tapatalk 2
An easier method for ur madness
Had the same issue with my power button not working. I'm not sure why but if I use my lg usb cord to charge it the phone will boot it self. Now if I use my Samsung, or Motorola or even tried a blackberry usb cord they all will just charge the battery. Kind of strange but lot less hectic than booting through ur computer every time. Hopefully this helps
Stumbled across this thread while playing with an EPIC 4G with the same problem. Quite by accident, and before I saw this thread, same thing worked for me. A LG USB cord boots it .

[Q] No display on Epic - Need Help Troubleshooting

Hola all!
I have been scouring the forums to try and find my way, but haven't had any luck. Tossing it out to you all so I can see if I can get some help.
Purchased an SPH-D700 on eBay and was told the digitizer/LCD were bad, but the phone was otherwise working. Received the phone and installed a new digitizer/LCD. Went to power it up and... you guessed it... no display.
Went to the forums and was able to follow the unbricking process. Phone went into download mode, but no digging android on the screen. Odin ran fine with no errors. Tried rebooting the phone, but still no bootup.
Any suggestions for my next step?
FYI, I have a open case on eBay to get buyer protection, but I would really like to get this puppy working. Any help wpuld be greatly appreciated.
Scott
The flat cable from the board to the screen might not be pushed all the way ito its connectors don't be afriad to put a little pressure on it either that oorr the flat cables bad
Sent from my SPH-D700 using xda premium
Display working, now no boot : /
Thanks for the tip, matrix!
I took the device apart and verified all the connections. I now get a display of the battery and it is showing 100% charged.
Next issue is that it will not start up if I press the power button. What should I try next?
Verify that the power button is pressin.g the in.ner power button u cud try re odoining if it worked before then.
Sent from my SPH-D700 using xda premium
Won't power on...
Well, I was able to get it to go into download mode and use Odin, but now it won't power up.
The battery display comes up when plugged it and when the display auto-dims after sitting, the camera and volume up/down will bring it back up. The power button does nothing now. I think the issue is the power button itself.
I ordered a new Keyboard flex/frame on eBay for $15. I'll replace it when it comes in and keep you all updated.
Thanks for the help.
I have been reading in other threads if you repeatedly plug in and out the usb cable it will turn on
Sent from my Nexus Slide 4G

T989 keeeps vibrating, shows splash screen and turns off!!

Hi, today i received this T989 that has this strange behavior. When i insert the battery it will try to boot by itself without touching the power button. But then it will turn off by itself also and starts to continuosly vibrate like its trying to boot but it wont. If i try to get to download mode with the JIG it will get to download mode but once i take the JIG out it will turn off again. My question is, could that be because it is bricked? Or maybe the power button damage? Perhaps the phone got wet? The sticker is kind of red, but if it was, i dont think it was too much because ive seen worst phones inside, i mean theres no sign of damp inside. I ask because if the case is that it might be bricked i will send it to mobiletech so they can fix it. But if its hardware then i will just have an expensive lcd display for sell lol..........
enelyam said:
Hi, today i received this T989 that has this strange behavior. When i insert the battery it will try to boot by itself without touching the power button. But then it will turn off by itself also and starts to continuosly vibrate like its trying to boot but it wont. If i try to get to download mode with the JIG it will get to download mode but once i take the JIG out it will turn off again. My question is, could that be because it is bricked? Or maybe the power button damage? Perhaps the phone got wet? The sticker is kind of red, but if it was, i dont think it was too much because ive seen worst phones inside, i mean theres no sign of damp inside. I ask because if the case is that it might be bricked i will send it to mobiletech so they can fix it. But if its hardware then i will just have an expensive lcd display for sell lol..........
Click to expand...
Click to collapse
Maybe a stuck rocker button?
Thought the power button might be shorted. But i dunno! I didnt want to touch the mobo but since it looks like theres nothing to do except try that i guess ill change that button and see how it goes....
enelyam said:
Thought the power button might be shorted. But i dunno! I didnt want to touch the mobo but since it looks like theres nothing to do except try that i guess ill change that button and see how it goes....
Click to expand...
Click to collapse
Did this end up working for you? I'm having the same issue...
Fairly certain its a power button issue. Went through the same thing myself in late July. Samsung logo shows, then it attempts to boot up only to be shut down and have the vibration pulse for a long time.
If you're able to Odin it back to stock, you can try and get T-Mobile or Samsung to replace it for you. If not, mobile tech videos has a button repair service.
Best of luck guys!
Sent from my SGH-T989
Hello, the same thing happened to me. I was able to bring it back to life by removing the back plate and disconnecting the motherboard completely. Then i inserted the jigg and put the battery back in. After 2 seconds i removed the jigg and connected the usb cable. Then i opened up odin 1.85 and the yellow com part stayed on i then flashed the program and my phones been working ever since. Good luck. Let me if you try it and if it worked for you.
Mine does it too.
Definitely the power button.
any solutions for the problem?
i cant trade my cell phone because i am on brazil ...i bought the t989 on ebay last year
My T-989 does the shiver and shake but won't start!! Please HELP!!!
aest said:
Hello, the same thing happened to me. I was able to bring it back to life by removing the back plate and disconnecting the motherboard completely. Then i inserted the jigg and put the battery back in. After 2 seconds i removed the jigg and connected the usb cable. Then i opened up odin 1.85 and the yellow com part stayed on i then flashed the program and my phones been working ever since. Good luck. Let me if you try it and if it worked for you.
Click to expand...
Click to collapse
Hi I'm having the same problem as the original post - what's worst is that I'm in Argentina and I bought the phone on ebay. I will attempt your solution but what is the jigg???? As scared as I am to open up my phone, I am more scared about traveling for another month without a phone! :crying::crying::crying:
Any other suggestions before I perform an operation on my phone??
Please and Thank you!
Have you tried a different battery? It sounds like a bad battery. My wife's Skyrocket was doing this until I charged her battery outside of the phone. I wouldn't open the phone until you try charging the battery.
Sent from my SGH-T989 using Tapatalk 2
Simple solution is to tap or beat on the power button with an eraser many times.
This problem is common on t989 and it is caused by sticky power button.
Tapping the power button with Eraser or rubber multiple times should do it.
Sent from my SGH-T989 using xda app-developers app
sharpeyedman said:
Simple solution is to tap or beat on the power button with an eraser many times.
This problem is common on t989 and it is caused by sticky power button.
Tapping the power button with Eraser or rubber multiple times should do it.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks,, It works..It wouldn't boot on just kept vibrating. I press the power button many times..and it boot it fine...:good:
Power button must be going bad on mine:silly:

Unresponsive Phone

I bought my Mom a used Inc2 on eBay. Rooted/S-OFF running SlimRom 4.2.2 on Page Plus.
My Mom messages me on Facebook to tell me she thinks the phone is broken. I have to agree. I don't know what she did, but she seems to think she had somehow got the phone into fastboot/bootloader/recovery and was trying to pull the battery to get it back to normal. She thinks she selected something before the battery pull, but doesn't know what.
Phone won't turn on (no splash screen, no boot animation, no nothing).
No LED when phone is plugged in.
Tried several charging cables.
Tried switching with a battery known to work and be charged.
Nothing.
Anyone else ever have a similar issue? Is there any way to repair this (taking apart phone and replacing parts)? Or should I just buy her a new phone?
Pull the battery completely..wait a sec with your finger on the power to completely discharge it ...pop battery back in volumedown +power to get into recovery check to see if she formated anything fix w.e profit perhaps ?
Sent from my ADR6350 using xda app-developers app
Battery is my guess
My guess was the battery too. Your mom may not have put it back in correctly (My mom sometimes can't see the little gold connectors without her glasses.) Make sure the connectors match up.
If that wasn't the problem, try using a (cell phone) universal battery charger.
(Amazon.com has them for cheap, and they save your life if your usb port ever dies until you can replace the charging port.)
Once you know the battery is charged, and put in correctly, you can tell if it's the phone or not.
If she wiped the system cache, you won't boot. But, you can always try placing a new ROM on the SD card (easiest way is using a desktop computer with an SD card reader,) and re-install the phone's operating system (rom).
Even if the phone is somehow bricked: you can still get her data and pictures off the SD card with any SD card reader connected to a computer.
We have all made the dinc 2 UNBRICKABLE mwuahahaha no paperweights here
Sent from my ADR6350 using xda app-developers app
chillybean said:
We have all made the dinc 2 UNBRICKABLE mwuahahaha no paperweights here
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the responses. But alas, it is not a simple matter of battery wrong way. My gf has the same phone and hers works. I tried switching batteries and the one from my Mom's phone works and has about 40% juice in it.
But her phone won't respond at all. When you plug in the USB charger, the LED should come on to signify that the phone is receiving power from the wall/computer/etc... There's nothing.
The phone doesn't turn on at all. I can't get into recovery because it won't power on at all.
She said the phone booted a couple times before I got it, but got stuck on the boot animation and never made it into the actual ROM. Now it won't come on at all. I guess the phone is bricked completely (by no fault of the software - I think this is some sort of hardward issue but I just don't know what)
I guess I'll activate her old phone. Thanks for trying to help.
(I really thought holding the power button without battery in might work because I had used that trick once before, but alas, nothing)
Maybe the power button is dirty try to clean it there's I tear down guide...you won't need to go far into it tho verrrry simple...voids warranty for sure
Sent from my ADR6350 using xda app-developers app
chillybean said:
Maybe the power button is dirty try to clean it there's I tear down guide...you won't need to go far into it tho verrrry simple...voids warranty for sure
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
I thought about that, too... But why wouldn't the LED turn on when connected to USB?
Warranty isn't an issue lol. I bought this thing refurbished on eBay.
Who knows maybe it dropped busting the led and power button...dinc forensics
O yea if not then its hardware software wouldn't make the phone not charge
Sent from my ADR6350 using xda app-developers app
I have same problem
I have same problem and when i got maintenance center they told me must change the IC flash for phone :crying:
Check the USB port
These phones came out so long ago I imagine original warranty is long gone. I that's the case, might as well open it up and check or fix the power button like chilly suggests.
There are little ribbon cables everywhere inside, for things like the USB port, screen digitizer...and if the phone was dropped, it could have squished the power button, and easily, jarred a ribbon loose. Checking them all out and inspecting the power button might be all you need to do for a fix. At the end of it all, even if nothing is solved, you can sell the phone for parts on ebay and make at least $45.
I thought about doing that once, but I'm glad I inspected mine before I hit the "sell button." I watched some tear-down videos on youtube and decided to give it a go. Now I'm much more comfortable with tinkering with phones. It can be a nice learning experience.
It started when I once tried to plug in my phone in the dark, and I actually managed to cram the USB charger into the phone upside-down!
What this did was make the phone un-chargable, even though the usb cable would still fit in there just fine.
Same symptoms you are having: cord goes in, no light comes on. Yet, the cord charges other phones just fine.
On ebay you can buy new USB ports for about $6-9. I purchased one, found a how-to video on youtube, and repaired mine myself with just a cheap torc x screwdriver set that I purchased for $8.
Fix worked 100%. Don't give up just yet.

Help! Screen broken? Phone dead?

Okay ladies and gentlemen, please take the time to help me out, as I've never had this happen before...
I should state that I am on Slim Bean weekly (4.3) and BionicSheep kernel.
Today I went to the gym, used my bluetooth headset as usual. I turned off my bluetooth when I got home and rebooted my phone (bluetooth won't turn off without a reboot). I laid my phone down (I didn't check to see if it rebooted), took a shower and played video games for about an hour.
When I checked to see if I had any texts, I noticed my phone wouldn't wake (I figured it had a hardboot), so I tried holding down the power button to reboot, which didn't work. I pulled the battery and saw the Bionic Sheep splash screen, then nothing. Tried the power button again, nothing. Now when I pull the battery, I see the Bionic Sheep splash screen about 50% of the time, if that... usually I feel a little vibrate, then see nothing. I have the USB Jig for download mode, which I used and it went into download mode, but then the screen disappeared...
What can this be? Dying phone, breaking screen? HELP!
EDIT: Just tried recovery. I see the blue writing in the upper left that says "Recovery Booting..." then nothing, just a black screen
Then you're not booting download mode, thats recovery trying to boot. Hold home, volume DOWN and power. When it starts to boot/vibrate release power only.
If you can get here flash stock/root66 firmware via odin and report back.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Then you're not booting download mode, thats recovery trying to boot. Hold home, volume DOWN and power. When it starts to boot/vibrate release power only.
If you can get here flash stock/root66 firmware via odin and report back.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Sorry I meant recovery, not download. Sorry for that. I tried download too as stated earlier.
Do you happen to have the links for odin and stock recovery? If not, i'll take a look in a sec.
EDIT: Just downloaded odin from your sig, I'll check for stock firmware in a sec.
But a new problem, like I said before my phone goes into download, but it only stayed on the screen for a few seconds, then turns off. Odin isn't recognizing the phone at all...
I just tried to do it again, download mode only stays on for about 3 seconds. Odin recognized it for the few seconds its on, then it disappears... any ideas?
Does the phone power on by itself if you remove and replace the battery?
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Does the phone power on by itself if you remove and replace the battery?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yes sir it does, don't have to touch the power button at all.
I've tried download and recovery mode dozens of times now, the phone just powers off after a few seconds and won't turn back on until I pull the battery.
doubleohseven said:
Yes sir it does, don't have to touch the power button at all.
I've tried download and recovery mode dozens of times now, the phone just powers off after a few seconds and won't turn back on until I pull the battery.
Click to expand...
Click to collapse
So i've ruled out the screen at this point. Even though im 99% sure it was over 75% charged, im letting it sit/charge for a few hours an try again.
Been googling about similar problems... could this be "sudden death syndrome"?
doubleohseven said:
So i've ruled out the screen at this point. Even though im 99% sure it was over 75% charged, im letting it sit/charge for a few hours an try again.
Been googling about similar problems... could this be "sudden death syndrome"?
Click to expand...
Click to collapse
If it powers on without having to press the button, then I am 95% sure that is the problem. The power button is perpetually pressed. It could be the switch is loose or jammed, which I believe is usually the case. It is possible that there could be a short, but I doubt it as this has been happening more and more frequently lately. Some have reported being able to fix it themselves by opening it and either replacing or reseating the button, while others opt to take it to a local shop and have it fixed. (if you do, do not let them attempt to flash anything or they will brick it).
You can try to tap on it to jiggle it unstuck, but if you get it working again, this will certainly only be temporary.
DocHoliday77 said:
If it powers on without having to press the button, then I am 95% sure that is the problem. The power button is perpetually pressed. It could be the switch is loose or jammed, which I believe is usually the case. It is possible that there could be a short, but I doubt it as this has been happening more and more frequently lately. Some have reported being able to fix it themselves by opening it and either replacing or reseating the button, while others opt to take it to a local shop and have it fixed. (if you do, do not let them attempt to flash anything or they will brick it).
You can try to tap on it to jiggle it unstuck, but if you get it working again, this will certainly only be temporary.
Click to expand...
Click to collapse
Okay ill give the power button a try before calling the insurance later today. Thanks for your help.
Do you happen know how t mobile insurance works? I'm really low on cash so i'm hoping there isn't a deductible for first time "offenses"...
EDIT: Quick question though, if it was in a constant boot loop with the button pressed, wouldn't I feel it vibrate multiple times and/or see the screen flash multiple times? I only feel/see it do these things once, then its gone.
I just took it apart and the power button was fine, so i'm now guessing this is something more serious...
Well I went through T mobile and am getting my phone replaced for $5. It's on backorder though so I have to wait 5-7 days before they even ship it, which kinda sucks.
Anyways I am hoping they don't see that I flashed a custom ROM. The once in awhile it does show the splash screen, it shows a little sheep on the bottom (due to the Bionic Sheep kernel), and the DL mode that stays on for about 2-3 seconds shows a flash count of 1. I am hoping they don't see it, or don't take the time to check after realizing that it's not functioning properly...
So did you get a warranty replacement then? (Insurance requires a $150 deductible, but it doesn't matter if it's been rooted) If so, they might see that and then charge you, I'm really not sure... I've heard of them doing that and also heard they don't even bother looking.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
So did you get a warranty replacement then? (Insurance requires a $150 deductible, but it doesn't matter if it's been rooted) If so, they might see that and then charge you, I'm really not sure... I've heard of them doing that and also heard they don't even bother looking.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I called T mobile tech support, and they only charged me $5, not $150. The refurb should be here on Thursday, I guess I'll find out soon enough if they charge me for the rooting (im pretty sure they won't notice since the screen is on for less than 3 seconds, but who knows).
I can always try the 'when in doubt, deny deny deny' technique. Lol
I've been with them for awhile and sent back multiple rooted phones and have never been charged
Sent from my SGH-T999 using xda app-developers app
Supamike88 said:
I've been with them for awhile and sent back multiple rooted phones and have never been charged
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the words of comfort. Lol
doubleohseven said:
I called T mobile tech support, and they only charged me $5, not $150. The refurb should be here on Thursday, I guess I'll find out soon enough if they charge me for the rooting (im pretty sure they won't notice since the screen is on for less than 3 seconds, but who knows).
I can always try the 'when in doubt, deny deny deny' technique. Lol
Click to expand...
Click to collapse
How long have you had the phone? If it's still under warranty then it's just the $5. But in my case where it is a year and a half old and there is physical damage, I seriously doubt they'd go for that!
That also means I might still just get a refurbished T999. Insurance claims go through Asurion, while warranty goes through T-Mobile. And unless I'm mistaken, Asurion has their own stock of refurbs...
Sent from my SGH-T999 using Tapatalk

Categories

Resources