some Question about my imei, baseband for F240K - LG Optimus G Pro

Hi all, i have some of Question need Answer
First please sorry about my poor English
i have a LG F240K used, my phone have 2 imei, one on *#06# and one on my under battery case, both is checked via chalg.com and all show it belong of F240K version. So here is my question :
- My *#06# is a fake imei ? if so, can i have chance to recover my original imei ( on my under battery case ) ?
- My baseband version show up : APQ8064/MDM9x15M , kernel 3.4.0
i searched it and the result is : Optimus G, F180 ...etc ( not of F240K )
- The F240K via google have APQ8064T/MDM9x15M with " T " after 8064, but my network still fine, so may i need to reflash my baseband ? and how can i do it ?
And i'm using SphinX v1.3 remod 20.4.14 20E ( kitkat ) , my wifi with so weak signal , 2 point of wifi singal on 5meter from the wifi AP, may it cause because my baseband ?
Please help me solve my questions , tks all so much

Related

[Q] No registered on network..

Hello guys ! (Sorry for my english,im newbie)
My problem,its after install 4.3 ROM to my Note II (GT-n7100),no registered on network..
I tried other metods to fix,but no-one not help.
I fixed network,but wifi doesn't working.. I downloaded WiFi Fix,but he too dont work to me.
Bootloader: N7100XXUEMK9 Baseband: N7100XXUEMJ9 PDA: N7100XXUEMK9 CSC:N7100OXXEMK4
XXDME4 modem too not work,my imei (null/null) ,but im recovered imei,so wifi again not work..
check your IMEI settings..sounds like u lost it
on the 4.3 leak no wifi is a known issue. pls install devil kernel.

[Q] Imei Null/null & Unknown Baseband after KK-4.2.2 Updated offline on N5100

Dear all,
Feel great after succes for updating to 4.4.2 (Saudi Arabian Version).... on my N5100
Smooth...faster... 2 thumbs up
but when i try turning on data connection.... then nothing...
imei : Null/null
Unknown Baseband.... etc
dial *#06# - Null/null
Please...need for help my n5100
Sorry for my english....
and need recomended link... if somebody already have solution for the same problem with me
Thanx for your help
This was for a note 3, but maybe it'll be of help... http://www.technobezz.com/restore-galaxy-null-imei-and-fix-not-registered-on-network/
andygev35 said:
This was for a note 3, but maybe it'll be of help... http://www.technobezz.com/restore-galaxy-null-imei-and-fix-not-registered-on-network/
Click to expand...
Click to collapse
ok thanx a lot... i'll report after i try tonight

Please i need i little help

Hi all
I've just bouth a LG Optimus G Pro F240S and i have some problems.
The phone is from another country and now im using it in Romania.
The phone was blockt and i've manage to deblocket to a servise to usit in my country...it workt but in service they swich my imei and i have another one that doesnt mach with the one from the back of the battery.
Last knight i've manage to make it back on the original one but..the same problems with the old imei and the original one are still there..i am losing signal and my 3g network is verry slow.
So i am asking...wath can i do to fix it?
If i flash the stock european version on these Korean version of the phone is posiblle to make it work?
Or i am beeging anywone that haves or had these problem and fix it please...please tell me how can i make it work normaly.
Thx in advance and sorry for my bad englesh.

Change the baseband of my G3

Hello , i'm a new owner of this phone .
I noticed that my phone struggles to get some network bars , so could you tell me how to change the baseband , i'm on android 5.0 stock .

Galaxy Note 4 N910: problems with N910F ? or N910P modell / no IMEI, no baseband !!!

Hello All,
I bought a used Note 4 with following specs:
- KK 4.4.4, N910F (F-Firmware) , GERMAN language
I decided to flash CM 12.1 and lost my IMEI and Baseband; unfortunately made no efs-backup or any backup .
CM 12.1 runs stable, but no signal , no telephony...; with various apps (CPU-Z etc.) I checked all device details:
- Modell: N910F , but N910P (P-modell) as bootloader....
Trying to install stock F-Firmware again, it failed; I could only install stock P-Firmware (US Sprint)....there are differences in trltespr, trlte, trltexx...???
Please help me, how can I get back IMEI, baseband and more how can I get back 1st F-Firmware with GERMAN language (I bought it with KK 4.4.4, N910F ( F-Firmware) , GERMAN language)!
The last 2-3 days and nights I installed P-Firmware, but only with a few english/south-american languages; with P-Firmware IMEI & baseband are 100% ok...but no german language and LTE here....!
Please help, how can I get back to 1st version....?
Thanks a lot
miki306 said:
Hello All,
I bought a used Note 4 with following specs:
- KK 4.4.4, N910F (F-Firmware) , GERMAN language
I decided to flash CM 12.1 and lost my IMEI and Baseband; unfortunately made no efs-backup or any backup .
CM 12.1 runs stable, but no signal , no telephony...; with various apps (CPU-Z etc.) I checked all device details:
- Modell: N910F , but N910P (P-modell) as bootloader....
Trying to install stock F-Firmware again, it failed; I could only install stock P-Firmware (US Sprint)....there are differences in trltespr, trlte, trltexx...???
Please help me, how can I get back IMEI, baseband and more how can I get back 1st F-Firmware with GERMAN language (I bought it with KK 4.4.4, N910F ( F-Firmware) , GERMAN language)!
The last 2-3 days and nights I installed P-Firmware, but only with a few english/south-american languages; with P-Firmware IMEI & baseband are 100% ok...but no german language and LTE here....!
Please help, how can I get back to 1st version....?
Thanks a lot
Click to expand...
Click to collapse
Download this apk from playstore it will tell you the model of phone that you have then you can look for a stock rooted rom or flash stock tar
thank you ricohz;
I will post the results here; hopefully you can help me about after that..
Hello ricohz,
please find attadhed the device info from Phone INFO Samsung:
Manufacturer: Samsung
Device modell: SM-N910F
device typ: trltexx
product name: cm_trltexx
Country: /
production date: /
Knox 0x1
product code: /
original CSC code: XAS
firmware code: / ??? nothing?
active CSC code: /
CSC country: /
bootloader version: N910PVPU4DPE1
PDA version: /
CSC-version: /
kernel: 3.10.40.-g05abc2e
Hardware/Board: qcom/APQ8084[32Bit]
platform/chip: apq8084
GPU: Qualcomm Adreno 420
RAM: 2,72 GB
Most info are "blank"...
Hopefully, you could help me, why devioce is "F" but bootloader is "P"; I tried several official firmwares..only P-Firmware is possible to insrtall...why not "F-Firmware"...???
Same here !!

Categories

Resources