Hi,
I have been using the multilang version of miui for a while. Its now in v 4.4.4, but theres been no updates on the thread for a while.
Since I could live with english only, I wanted to start using the weekly updates that MIUI offers me anyways.
But after download the phone restarts and begins installing only to show some error message for a split second and rebooting without having updated the rom. The message is there so briefly I cannot tell what it says.
Any idea on how to get to use the weekly updates directly?
//Steen
(E975)
neetsnp said:
Hi,
I have been using the multilang version of miui for a while. Its now in v 4.4.4, but theres been no updates on the thread for a while.
Since I could live with english only, I wanted to start using the weekly updates that MIUI offers me anyways.
But after download the phone restarts and begins installing only to show some error message for a split second and rebooting without having updated the rom. The message is there so briefly I cannot tell what it says.
Any idea on how to get to use the weekly updates directly?
//Steen
(E975)
Click to expand...
Click to collapse
You can download from this site http://en.miui.com/download-123.html :3
I will try
Alrighty.... Yes, maybe onetime manually install, and then the weekly will start working. Or if not working, at least it should let me see the error message.
I was able to run the weekly update sometime ago, but went back to multiLang, so possibly I could try install older version of multilang and see.
Anyways.... thanks for response
Bloody 6 hours to download.... grr...
Related
Hi all,
I have a Find 7 QHD on Paranoid Android 4.6 BETA 4.
Got an OTA update this morning (BETA 5), installed it and I just get get black screen on boot that goes no further.
I also restored a previous backup and manually updated to latest beta with same results.
Has anyone with Find 7 had any luck with the latest PA 4.6 BETA 5? Wondering if it's something with my setup or the update itself.
Thanks in advance.
Same issue, tried from Beta 4 upgrade and clean install but both won't boot.
I can confirm that the latest update breaks PA completely (for me, anyway). Guess I'll just have to wait for the next big update.
Same thing happened to me...7a here
That sux, but I'm glad it's not just me.
Have seen many reports of this, guess I'm staying on BETA 4.
Hey, just giving a quick update to all o' y'all: The newest PA beta build boots without a hitch! I know that it's been out for some time now, but I just tried it and I seemed to have very few problems other than the processor refusing to go into its low power state (which also happens with Cyanogenmod for me, so I'm not sure what's going on there).
Anyway, happy flashing as always!
Hi,
This morning, I got an update notification for the Team UB ROM running on my N7100. Because I was outside at the time I saw the notice, I closed it thinking that I could run a system update check later and get the update. But now, no matter what I do, I can't get the update because running the update check says that no updates are available. Is there any way I can get the latest update for the ROM?
Thanks.
Ani.
aniruddo said:
Hi,
This morning, I got an update notification for the Team UB ROM running on my N7100. Because I was outside at the time I saw the notice, I closed it thinking that I could run a system update check later and get the update. But now, no matter what I do, I can't get the update because running the update check says that no updates are available. Is there any way I can get the latest update for the ROM?
Thanks.
Ani.
Click to expand...
Click to collapse
it's because TEAM UB ROM stopped the development for note 2. it means we will not receive another update from them
The xiaomi Mi Pad stable global version is getting new update..rolling out to users in phases..its not available in their website yet.
The version is miui_MIPADGlobal_V6.6.3.0.KXFMICF
Here goes the link if you need it
http://bigota.d.miui.com/V6.6.3.0.KXFMICF/miui_MIPADGlobal_V6.6.3.0.KXFMICF_6a765628a2_4.4.zip
EDIT:-
here goes the file uploaded on another server..(if you are having problem downloading from miui's server)
Click Here to download from Dev host
ENJOYAnd hit THANKS button
-Adarsh- said:
The xiaomi Mi Pad stable global version is getting new update..rolling out to users in phases..its not available in their website yet.
The version is miui_MIPADGlobal_V6.6.3.0.KXFMICF
Here goes the link if you need it
http://bigota.d.miui.com/V6.6.3.0.KXFMICF/miui_MIPADGlobal_V6.6.3.0.KXFMICF_6a765628a2_4.4.zip
ENJOYAnd hit THANKS button
Click to expand...
Click to collapse
Do you have this update flashed? If so, what are the new features?
kc12 said:
Do you have this update flashed? If so, what are the new features?
Click to expand...
Click to collapse
there doesnt seem to be any new feature..just some backdoor improvements..
actually the update failed to download on device due to wifi issues..so was downloading on pc..but now currently miui servers are down for 1 hr due to maintenance jobs.so maybe the link will resume download after this..only 11 mb left and the server disconnected:crying:
EDIT:-
the download resumed..maybe server timeout happened that time..refreshed and its downloading..
you can do the same if it stops somewhere
flashed the update..the change log is weired..but nothing new in xiaomi world..
the browser seems to have updated to a new version..
Unofficial LineageOS 13 (Android Marshmallow) for JBBL dated March 18, 2017 from the 4PDA forums courtesy of developer ilichva!
Again, this is only for JBBL. Flash at your own risk and please do a nandroid backup prior to doing so!
All credits and thanks go to the original developer ilichva!
____________________________________________
Latest Build - LineageOS 13:
lineage-13.0-20170318-port-ilichva-xt907_jbbl.zip (405.4 MB)
Mega
SolidFiles
PCloud
MD5 :: 63FB23666399844E5BB7A8D9C347374D
____________________________________________
Prior Build - CM13:
cm-13.0-20161205-ilichva-xt907_jbb.zip (411.9 MB)
Original Link
Mega
SolidFiles
PCloud
MD5 :: 3c786a57929d024010a0fce36287ea7d
____________________________________________
NOTE: If you are on KitKat Bootloader (KKBL), you will need to revert to the JellyBean Bootloader (JBBL) before you can flash this ROM. Instructions on how to do so may be found here and here and here
____________________________________________
Latest TWRP 3.0.2 recovery by ilichva may be found/downloaded here
Updated to 03.25.2016 build
Hallo Rahimali
Thanks for the share. I have tried this and apparently works ok. I'm unable to get WiFi working. Tried different gapps but there are force close issues. Any recommended gapps versions available?
Opengapps usually does the job. Flashing gapps with marshmallow is different than with prior android versions. With MM you have to flash gapps immediately after you flash the ROM (before booting up the ROM for the first time). Try and see if that resolves your FC issues
Updated to April 02, 2016 build!
I managed to get the force close issues resolved. Everything works fine except Wifi. I am unable to enable wifi as the button is greyed out. I tried enabling wifi from terminal using svc wifi enable, it enabled the button but wouldnt detect any available wireless networks. Any fixes for this?
Updated to April 05, 2016 build!
ultrasoniic said:
I managed to get the force close issues resolved. Everything works fine except Wifi. I am unable to enable wifi as the button is greyed out. I tried enabling wifi from terminal using svc wifi enable, it enabled the button but wouldnt detect any available wireless networks. Any fixes for this?
Click to expand...
Click to collapse
Sorry no idea. Nobody is complaining in the 4pda forums about any WiFi issues. Did you do a clean flash? Maybe the developer, @ilichva can help?
bootloader and recovery
My XT907 is showing that my bootloader is "0x109B" and I am unsure what version of TWRP supports 6.0.1 (currently running 2.8.6.0)
Can anyone verify their settings and let me know?
I am running CM12.1 currently, so I should be able to dirty flash correct?
Thanks guys!
KKBL?
Anyone know of a marshmallow based rom that works with the kitkat bootloader for this device?
crzypcdude said:
Anyone know of a marshmallow based rom that works with the kitkat bootloader for this device?
Click to expand...
Click to collapse
Marshmallow not yet available on KKBL
rahimali said:
Marshmallow not yet available on KKBL
Click to expand...
Click to collapse
Are there any significant reasons to stay on the KitKat bootloader? Otherwise I'll just downgrade now that I'm rooted with an unlocked bootloader.
One of the most compelling reasons to stick with the KKBL would be the availability of the 3.4x kernel as opposed to the 3.0x kernel on the JBBL but feel free make your own decision. I was on the JBBL (by choice) for a considerable length of time without any apparent side effects...
Would you mind adding dates to post #1?
Any updatefor this rom?
crzypcdude said:
Would you mind adding dates to post #1?
Click to expand...
Click to collapse
The dates are already present in post #1 as well as in the filenames.
dedik46 said:
Any updatefor this rom?
Click to expand...
Click to collapse
Updated!
Are all the builds being updated in the 4PDA post linked in #1 as well as TWRP builds?
crzypcdude said:
Are all the builds being updated in the 4PDA post linked in #1 as well as TWRP builds?
Click to expand...
Click to collapse
That is correct.
Confirmed Working!
Can confirm this works, flashed the recovery included in the 4pda post, used it to flash the rom, gapps, and supersu. Initially booted up in Russian, but after waiting for 30 seconds or so, switched to English on its own. Setup was flawless after that, no issues to report as of now. Anyone that needs help installing the rom or downgrading from kitkat to jellybean just message me.
I thought I was the only one that ended up with default language in Russian... All the previous builds defaulted to English on install... Also when I downloaded the latest update it downloaded on my phone as a .bin not a .zip I checked the file size and contents vs what is online (after changing the extension to .zip) and everything seemed to be Ok so I installed and been up and running on latest version for 24 hours....
Had a few FC's in the beginning while changing the language to English (I have a feeling that some of my already installed apk's caused the issue) . I did do a test run before restoring my stuff and didn't have any issues during initial setup and the phone auto corrected language based off sim during initial setup.
Haven't gotten a chance to fully test this build, but I know that the issue that I was having with the native tethering soft rebooting the phone every couple of hours when active is gone! After a few more days of messing with it I will post any other issues that I come across
Sent from my Moto Razr M on cm13 4-16-16 using XDA Free mobile app
Any clue about why I'm getting error 7 while finishing the last steps of the ROM flashing procedure?
I have 11.0.4.0 Global (android 10).
I got a notice for an interim update, with the notes referring to bug fixes for some of the things mentioned in Android 10. I recall mention of the navigation in second space and something about SIM card
However after about an hour, before I had time to download, the update notice disappeared and the update screen show "no updates available"
Did they pull the update?
In any case I hope the address the wife/BT issue because it is quite severe (and inconvenient), it was not mentioned.
I actually got the update
Sent from my Redmi Note 8 Pro using Tapatalk
View attachment 5046493
the update seems to be still available so you might be having some notifications issues, try manual check for update.
https://mirom.ezbox.idv.tw/en/phone/begonia/
Still on 11.0.3.0 on Global in the UK, No new update for me.
jshames said:
I have 11.0.4.0 Global (android 10).
I got a notice for an interim update, with the notes referring to bug fixes for some of the things mentioned in Android 10. I recall mention of the navigation in second space and something about SIM card
However after about an hour, before I had time to download, the update notice disappeared and the update screen show "no updates available"
Did they pull the update?
In any case I hope the address the wife/BT issue because it is quite severe (and inconvenient), it was not mentioned.
Click to expand...
Click to collapse
Hi there, it is still available as I just got it about one hour ago, global model in BiH...
No update for me. I am on global 11.0.3.0 Slovenia Mine friend/coworker has 11.0.4.0 wich i dont get neither.
Mine came in
Looks like you can manually install the update if you know what you are doing and don't want to wait.
https://www.getdroidtips.com/miui-11-0-5-0-global-stable-redmi-note-8-pro/
surprising enough today I checked for OTA update and I got it.
minor bug fix while we wait for MIUI12
any link for the EU version?